All of lore.kernel.org
 help / color / mirror / Atom feed
From: Wenpeng Liang <liangwenpeng@huawei.com>
To: <dledford@redhat.com>, <jgg@nvidia.com>
Cc: <linux-rdma@vger.kernel.org>, <linuxarm@huawei.com>,
	<liangwenpeng@huawei.com>
Subject: [PATCH for-next 1/3] RDMA/hns: Remove unsupport cmdq mode
Date: Sat, 21 Aug 2021 17:53:25 +0800	[thread overview]
Message-ID: <1629539607-33217-2-git-send-email-liangwenpeng@huawei.com> (raw)
In-Reply-To: <1629539607-33217-1-git-send-email-liangwenpeng@huawei.com>

From: Lang Cheng <chenglang@huawei.com>

CMDQ support un-interrupt mode only, and firmware ignores this mode flag,
so remove it.

Fixes: a04ff739f2a9 ("RDMA/hns: Add command queue support for hip08 RoCE driver")
Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
---
 drivers/infiniband/hw/hns/hns_roce_hw_v2.c | 21 +++++++--------------
 drivers/infiniband/hw/hns/hns_roce_hw_v2.h | 20 +++++++-------------
 2 files changed, 14 insertions(+), 27 deletions(-)

diff --git a/drivers/infiniband/hw/hns/hns_roce_hw_v2.c b/drivers/infiniband/hw/hns/hns_roce_hw_v2.c
index 4677c48..514473f 100644
--- a/drivers/infiniband/hw/hns/hns_roce_hw_v2.c
+++ b/drivers/infiniband/hw/hns/hns_roce_hw_v2.c
@@ -1255,8 +1255,7 @@ static void hns_roce_cmq_setup_basic_desc(struct hns_roce_cmq_desc *desc,
 {
 	memset((void *)desc, 0, sizeof(struct hns_roce_cmq_desc));
 	desc->opcode = cpu_to_le16(opcode);
-	desc->flag =
-		cpu_to_le16(HNS_ROCE_CMD_FLAG_NO_INTR | HNS_ROCE_CMD_FLAG_IN);
+	desc->flag = cpu_to_le16(HNS_ROCE_CMD_FLAG_IN);
 	if (is_read)
 		desc->flag |= cpu_to_le16(HNS_ROCE_CMD_FLAG_WR);
 	else
@@ -1295,16 +1294,11 @@ static int __hns_roce_cmq_send(struct hns_roce_dev *hr_dev,
 	/* Write to hardware */
 	roce_write(hr_dev, ROCEE_TX_CMQ_PI_REG, csq->head);
 
-	/* If the command is sync, wait for the firmware to write back,
-	 * if multi descriptors to be sent, use the first one to check
-	 */
-	if (le16_to_cpu(desc->flag) & HNS_ROCE_CMD_FLAG_NO_INTR) {
-		do {
-			if (hns_roce_cmq_csq_done(hr_dev))
-				break;
-			udelay(1);
-		} while (++timeout < priv->cmq.tx_timeout);
-	}
+	do {
+		if (hns_roce_cmq_csq_done(hr_dev))
+			break;
+		udelay(1);
+	} while (++timeout < priv->cmq.tx_timeout);
 
 	if (hns_roce_cmq_csq_done(hr_dev)) {
 		for (ret = 0, i = 0; i < num; i++) {
@@ -1768,8 +1762,7 @@ static int __hns_roce_set_vf_switch_param(struct hns_roce_dev *hr_dev,
 	if (ret)
 		return ret;
 
-	desc.flag =
-		cpu_to_le16(HNS_ROCE_CMD_FLAG_NO_INTR | HNS_ROCE_CMD_FLAG_IN);
+	desc.flag = cpu_to_le16(HNS_ROCE_CMD_FLAG_IN);
 	desc.flag &= cpu_to_le16(~HNS_ROCE_CMD_FLAG_WR);
 	roce_set_bit(swt->cfg, VF_SWITCH_DATA_CFG_ALW_LPBK_S, 1);
 	roce_set_bit(swt->cfg, VF_SWITCH_DATA_CFG_ALW_LCL_LPBK_S, 0);
diff --git a/drivers/infiniband/hw/hns/hns_roce_hw_v2.h b/drivers/infiniband/hw/hns/hns_roce_hw_v2.h
index 3f758d6..212799d 100644
--- a/drivers/infiniband/hw/hns/hns_roce_hw_v2.h
+++ b/drivers/infiniband/hw/hns/hns_roce_hw_v2.h
@@ -129,19 +129,13 @@
 
 #define HNS_ROCE_V2_TABLE_CHUNK_SIZE		(1 << 18)
 
-#define HNS_ROCE_CMD_FLAG_IN_VALID_SHIFT	0
-#define HNS_ROCE_CMD_FLAG_OUT_VALID_SHIFT	1
-#define HNS_ROCE_CMD_FLAG_NEXT_SHIFT		2
-#define HNS_ROCE_CMD_FLAG_WR_OR_RD_SHIFT	3
-#define HNS_ROCE_CMD_FLAG_NO_INTR_SHIFT		4
-#define HNS_ROCE_CMD_FLAG_ERR_INTR_SHIFT	5
-
-#define HNS_ROCE_CMD_FLAG_IN		BIT(HNS_ROCE_CMD_FLAG_IN_VALID_SHIFT)
-#define HNS_ROCE_CMD_FLAG_OUT		BIT(HNS_ROCE_CMD_FLAG_OUT_VALID_SHIFT)
-#define HNS_ROCE_CMD_FLAG_NEXT		BIT(HNS_ROCE_CMD_FLAG_NEXT_SHIFT)
-#define HNS_ROCE_CMD_FLAG_WR		BIT(HNS_ROCE_CMD_FLAG_WR_OR_RD_SHIFT)
-#define HNS_ROCE_CMD_FLAG_NO_INTR	BIT(HNS_ROCE_CMD_FLAG_NO_INTR_SHIFT)
-#define HNS_ROCE_CMD_FLAG_ERR_INTR	BIT(HNS_ROCE_CMD_FLAG_ERR_INTR_SHIFT)
+enum {
+	HNS_ROCE_CMD_FLAG_IN = BIT(0),
+	HNS_ROCE_CMD_FLAG_OUT = BIT(1),
+	HNS_ROCE_CMD_FLAG_NEXT = BIT(2),
+	HNS_ROCE_CMD_FLAG_WR = BIT(3),
+	HNS_ROCE_CMD_FLAG_ERR_INTR = BIT(5),
+};
 
 #define HNS_ROCE_CMQ_DESC_NUM_S		3
 
-- 
2.8.1


  reply	other threads:[~2021-08-21  9:57 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-08-21  9:53 [PATCH for-next 0/3] Enable or remove hardware features Wenpeng Liang
2021-08-21  9:53 ` Wenpeng Liang [this message]
2021-08-21  9:53 ` [PATCH for-next 2/3] RDMA/hns: Enable stash feature of HIP09 Wenpeng Liang
2021-08-21  9:53 ` [PATCH for-next 3/3] RDMA/hns: Ownerbit mode add control field Wenpeng Liang
2021-08-23 16:54 ` [PATCH for-next 0/3] Enable or remove hardware features Jason Gunthorpe

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1629539607-33217-2-git-send-email-liangwenpeng@huawei.com \
    --to=liangwenpeng@huawei.com \
    --cc=dledford@redhat.com \
    --cc=jgg@nvidia.com \
    --cc=linux-rdma@vger.kernel.org \
    --cc=linuxarm@huawei.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.