[RFC 16/19] arm64: dts: imx8mq: Add interconnect properties to icc consumer nodes

[Abel Vesa <abel.vesa@nxp.com>]

We add all the properties necessary to control the interconnect
based on the required rates all the way from consumers to the dram.
The fsl,icc-rate specifies the minimum required rate the consumer needs
in order to operate.
For now, only the fec, usdhc1 and usdhc2 are added as consumers.

Signed-off-by: Abel Vesa <abel.vesa@nxp.com>
---
 arch/arm64/boot/dts/freescale/imx8mq.dtsi | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
index 5a73ebda6bb3..0489f7416993 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
@@ -1215,6 +1215,9 @@ usdhc1: mmc@30b40000 {
 				             "fsl,imx7d-usdhc";
 				reg = <0x30b40000 0x10000>;
 				interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&icc IMX8MQ_ICM_USDHC1 &icc IMX8MQ_ICS_DRAM>;
+				interconnect-names = "path";
+				fsl,icc-rate = <266666>;
 				clocks = <&clk IMX8MQ_CLK_IPG_ROOT>,
 				         <&clk IMX8MQ_CLK_NAND_USDHC_BUS>,
 				         <&clk IMX8MQ_CLK_USDHC1_ROOT>;
@@ -1230,6 +1233,9 @@ usdhc2: mmc@30b50000 {
 				             "fsl,imx7d-usdhc";
 				reg = <0x30b50000 0x10000>;
 				interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&icc IMX8MQ_ICM_USDHC2 &icc IMX8MQ_ICS_DRAM>;
+				interconnect-names = "path";
+				fsl,icc-rate = <266666>;
 				clocks = <&clk IMX8MQ_CLK_IPG_ROOT>,
 				         <&clk IMX8MQ_CLK_NAND_USDHC_BUS>,
 				         <&clk IMX8MQ_CLK_USDHC2_ROOT>;
@@ -1272,6 +1278,9 @@ fec1: ethernet@30be0000 {
 				             <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>,
 					     <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>,
 					     <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
+				interconnects = <&icc IMX8MQ_ICM_ENET &icc IMX8MQ_ICS_DRAM>;
+				interconnect-names = "path";
+				fsl,icc-rate = <800000>;
 				clocks = <&clk IMX8MQ_CLK_ENET1_ROOT>,
 				         <&clk IMX8MQ_CLK_ENET1_ROOT>,
 				         <&clk IMX8MQ_CLK_ENET_TIMER>,
-- 
2.31.1