[PATCH] ath11k: add hw_param for wakeup_mhi

[Seevalamuthu Mariappan <quic_seevalam@quicinc.com>]

Wakeup mhi is needed before pci_read/write only for QCA6390
and WCN6855. Since wakeup & release mhi is enabled for all
hardwares, below mhi assert is seen in QCN9074.

	Kernel panic - not syncing: dev_wake != 0
	CPU: 2 PID: 13535 Comm: procd Not tainted 4.4.60 #1
	Hardware name: Generic DT based system
	[<80316dac>] (unwind_backtrace) from [<80313700>] (show_stack+0x10/0x14)
	[<80313700>] (show_stack) from [<805135dc>] (dump_stack+0x7c/0x9c)
	[<805135dc>] (dump_stack) from [<8032136c>] (panic+0x84/0x1f8)
	[<8032136c>] (panic) from [<80549b24>] (mhi_pm_disable_transition+0x3b8/0x5b8)
	[<80549b24>] (mhi_pm_disable_transition) from [<80549ddc>] (mhi_power_down+0xb8/0x100)
	[<80549ddc>] (mhi_power_down) from [<7f5242b0>] (ath11k_mhi_op_status_cb+0x284/0x3ac [ath11k_pci])
	[E][__mhi_device_get_sync] Did not enter M0 state, cur_state:RESET pm_state:SHUTDOWN Process
	[E][__mhi_device_get_sync] Did not enter M0 state, cur_state:RESET pm_state:SHUTDOWN Process
	[E][__mhi_device_get_sync] Did not enter M0 state, cur_state:RESET pm_state:SHUTDOWN Process
	[<7f5242b0>] (ath11k_mhi_op_status_cb [ath11k_pci]) from [<7f524878>] (ath11k_mhi_stop+0x10/0x20 [ath11k_pci])
	[<7f524878>] (ath11k_mhi_stop [ath11k_pci]) from [<7f525b94>] (ath11k_pci_power_down+0x54/0x90 [ath11k_pci])
	[<7f525b94>] (ath11k_pci_power_down [ath11k_pci]) from [<8056b2a8>] (pci_device_shutdown+0x30/0x44)
	[<8056b2a8>] (pci_device_shutdown) from [<805cfa0c>] (device_shutdown+0x124/0x174)
	[<805cfa0c>] (device_shutdown) from [<8033aaa4>] (kernel_restart+0xc/0x50)
	[<8033aaa4>] (kernel_restart) from [<8033ada8>] (SyS_reboot+0x178/0x1ec)
	[<8033ada8>] (SyS_reboot) from [<80301b80>] (ret_fast_syscall+0x0/0x34)

Hence, disable wakeup/release mhi using hw_param for other hardwares.

Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.5.0.1-01060-QCAHKSWPL_SILICONZ-1

Fixes: a05bd85133 ("ath11k: read and write registers below unwindowed address")
Signed-off-by: Seevalamuthu Mariappan <quic_seevalam@quicinc.com>
---
 drivers/net/wireless/ath/ath11k/core.c |  5 +++++
 drivers/net/wireless/ath/ath11k/hw.h   |  1 +
 drivers/net/wireless/ath/ath11k/pci.c  | 12 ++++++++----
 3 files changed, 14 insertions(+), 4 deletions(-)

diff --git a/drivers/net/wireless/ath/ath11k/core.c b/drivers/net/wireless/ath/ath11k/core.c
index bd77aed..4ac09f0 100644
--- a/drivers/net/wireless/ath/ath11k/core.c
+++ b/drivers/net/wireless/ath/ath11k/core.c
@@ -84,6 +84,7 @@ static const struct ath11k_hw_params ath11k_hw_params[] = {
 		.max_tx_ring = DP_TCL_NUM_RING_MAX,
 		.hal_params = &ath11k_hw_hal_params_ipq8074,
 		.supports_dynamic_smps_6ghz = false,
+		.wakeup_mhi = false,
 	},
 	{
 		.hw_rev = ATH11K_HW_IPQ6018_HW10,
@@ -135,6 +136,7 @@ static const struct ath11k_hw_params ath11k_hw_params[] = {
 		.max_tx_ring = DP_TCL_NUM_RING_MAX,
 		.hal_params = &ath11k_hw_hal_params_ipq8074,
 		.supports_dynamic_smps_6ghz = false,
+		.wakeup_mhi = false,
 	},
 	{
 		.name = "qca6390 hw2.0",
@@ -185,6 +187,7 @@ static const struct ath11k_hw_params ath11k_hw_params[] = {
 		.max_tx_ring = DP_TCL_NUM_RING_MAX_QCA6390,
 		.hal_params = &ath11k_hw_hal_params_qca6390,
 		.supports_dynamic_smps_6ghz = false,
+		.wakeup_mhi = true,
 	},
 	{
 		.name = "qcn9074 hw1.0",
@@ -235,6 +238,7 @@ static const struct ath11k_hw_params ath11k_hw_params[] = {
 		.max_tx_ring = DP_TCL_NUM_RING_MAX,
 		.hal_params = &ath11k_hw_hal_params_ipq8074,
 		.supports_dynamic_smps_6ghz = true,
+		.wakeup_mhi = false,
 	},
 	{
 		.name = "wcn6855 hw2.0",
@@ -285,6 +289,7 @@ static const struct ath11k_hw_params ath11k_hw_params[] = {
 		.max_tx_ring = DP_TCL_NUM_RING_MAX_QCA6390,
 		.hal_params = &ath11k_hw_hal_params_qca6390,
 		.supports_dynamic_smps_6ghz = false,
+		.wakeup_mhi = true,
 	},
 };
 
diff --git a/drivers/net/wireless/ath/ath11k/hw.h b/drivers/net/wireless/ath/ath11k/hw.h
index 2c7bd7a..83b6240 100644
--- a/drivers/net/wireless/ath/ath11k/hw.h
+++ b/drivers/net/wireless/ath/ath11k/hw.h
@@ -178,6 +178,7 @@ struct ath11k_hw_params {
 	u8 max_tx_ring;
 	const struct ath11k_hw_hal_params *hal_params;
 	bool supports_dynamic_smps_6ghz;
+	bool wakeup_mhi;
 };
 
 struct ath11k_hw_ops {
diff --git a/drivers/net/wireless/ath/ath11k/pci.c b/drivers/net/wireless/ath/ath11k/pci.c
index 3d353e7..fadded5 100644
--- a/drivers/net/wireless/ath/ath11k/pci.c
+++ b/drivers/net/wireless/ath/ath11k/pci.c
@@ -182,7 +182,8 @@ void ath11k_pci_write32(struct ath11k_base *ab, u32 offset, u32 value)
 	/* for offset beyond BAR + 4K - 32, may
 	 * need to wakeup MHI to access.
 	 */
-	if (test_bit(ATH11K_PCI_FLAG_INIT_DONE, &ab_pci->flags) &&
+	if (ab->hw_params.wakeup_mhi &&
+	    test_bit(ATH11K_PCI_FLAG_INIT_DONE, &ab_pci->flags) &&
 	    offset >= ACCESS_ALWAYS_OFF)
 		mhi_device_get_sync(ab_pci->mhi_ctrl->mhi_dev);
 
@@ -206,7 +207,8 @@ void ath11k_pci_write32(struct ath11k_base *ab, u32 offset, u32 value)
 		}
 	}
 
-	if (test_bit(ATH11K_PCI_FLAG_INIT_DONE, &ab_pci->flags) &&
+	if (ab->hw_params.wakeup_mhi &&
+	    test_bit(ATH11K_PCI_FLAG_INIT_DONE, &ab_pci->flags) &&
 	    offset >= ACCESS_ALWAYS_OFF)
 		mhi_device_put(ab_pci->mhi_ctrl->mhi_dev);
 }
@@ -219,7 +221,8 @@ u32 ath11k_pci_read32(struct ath11k_base *ab, u32 offset)
 	/* for offset beyond BAR + 4K - 32, may
 	 * need to wakeup MHI to access.
 	 */
-	if (test_bit(ATH11K_PCI_FLAG_INIT_DONE, &ab_pci->flags) &&
+	if (ab->hw_params.wakeup_mhi &&
+	    test_bit(ATH11K_PCI_FLAG_INIT_DONE, &ab_pci->flags) &&
 	    offset >= ACCESS_ALWAYS_OFF)
 		mhi_device_get_sync(ab_pci->mhi_ctrl->mhi_dev);
 
@@ -243,7 +246,8 @@ u32 ath11k_pci_read32(struct ath11k_base *ab, u32 offset)
 		}
 	}
 
-	if (test_bit(ATH11K_PCI_FLAG_INIT_DONE, &ab_pci->flags) &&
+	if (ab->hw_params.wakeup_mhi &&
+	    test_bit(ATH11K_PCI_FLAG_INIT_DONE, &ab_pci->flags) &&
 	    offset >= ACCESS_ALWAYS_OFF)
 		mhi_device_put(ab_pci->mhi_ctrl->mhi_dev);
 
-- 
2.7.4