From: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
To: Kishon Vijay Abraham I <kishon@ti.com>, Vinod Koul <vkoul@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>,
Ryuta NAKANISHI <nakanishi.ryuta@socionext.com>,
linux-phy@lists.infradead.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org,
Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Subject: [PATCH] phy: uniphier-usb3ss: fix unintended writing zeros to PHY register
Date: Wed, 22 Dec 2021 14:19:29 +0900 [thread overview]
Message-ID: <1640150369-4134-1-git-send-email-hayashi.kunihiko@socionext.com> (raw)
From: Ryuta NAKANISHI <nakanishi.ryuta@socionext.com>
Similar to commit 4a90bbb478db ("phy: uniphier-pcie: Fix updating phy
parameters"), in function uniphier_u3ssphy_set_param(), unintentionally
write zeros to other fields when writing PHY registers.
Fixes: 5ab43d0f8697 ("phy: socionext: add USB3 PHY driver for UniPhier SoC")
Signed-off-by: Ryuta NAKANISHI <nakanishi.ryuta@socionext.com>
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
---
drivers/phy/socionext/phy-uniphier-usb3ss.c | 10 ++++++----
1 file changed, 6 insertions(+), 4 deletions(-)
diff --git a/drivers/phy/socionext/phy-uniphier-usb3ss.c b/drivers/phy/socionext/phy-uniphier-usb3ss.c
index 7ce611c2088b..f402ed8732fd 100644
--- a/drivers/phy/socionext/phy-uniphier-usb3ss.c
+++ b/drivers/phy/socionext/phy-uniphier-usb3ss.c
@@ -22,11 +22,13 @@
#include <linux/reset.h>
#define SSPHY_TESTI 0x0
-#define SSPHY_TESTO 0x4
#define TESTI_DAT_MASK GENMASK(13, 6)
#define TESTI_ADR_MASK GENMASK(5, 1)
#define TESTI_WR_EN BIT(0)
+#define SSPHY_TESTO 0x4
+#define TESTO_DAT_MASK GENMASK(7, 0)
+
#define PHY_F(regno, msb, lsb) { (regno), (msb), (lsb) }
#define CDR_CPD_TRIM PHY_F(7, 3, 0) /* RxPLL charge pump current */
@@ -84,12 +86,12 @@ static void uniphier_u3ssphy_set_param(struct uniphier_u3ssphy_priv *priv,
val = FIELD_PREP(TESTI_DAT_MASK, 1);
val |= FIELD_PREP(TESTI_ADR_MASK, p->field.reg_no);
uniphier_u3ssphy_testio_write(priv, val);
- val = readl(priv->base + SSPHY_TESTO);
+ val = readl(priv->base + SSPHY_TESTO) & TESTO_DAT_MASK;
/* update value */
- val &= ~FIELD_PREP(TESTI_DAT_MASK, field_mask);
+ val &= ~field_mask;
data = field_mask & (p->value << p->field.lsb);
- val = FIELD_PREP(TESTI_DAT_MASK, data);
+ val = FIELD_PREP(TESTI_DAT_MASK, data | val);
val |= FIELD_PREP(TESTI_ADR_MASK, p->field.reg_no);
uniphier_u3ssphy_testio_write(priv, val);
uniphier_u3ssphy_testio_write(priv, val | TESTI_WR_EN);
--
2.7.4
WARNING: multiple messages have this Message-ID (diff)
From: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
To: Kishon Vijay Abraham I <kishon@ti.com>, Vinod Koul <vkoul@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>,
Ryuta NAKANISHI <nakanishi.ryuta@socionext.com>,
linux-phy@lists.infradead.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org,
Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Subject: [PATCH] phy: uniphier-usb3ss: fix unintended writing zeros to PHY register
Date: Wed, 22 Dec 2021 14:19:29 +0900 [thread overview]
Message-ID: <1640150369-4134-1-git-send-email-hayashi.kunihiko@socionext.com> (raw)
From: Ryuta NAKANISHI <nakanishi.ryuta@socionext.com>
Similar to commit 4a90bbb478db ("phy: uniphier-pcie: Fix updating phy
parameters"), in function uniphier_u3ssphy_set_param(), unintentionally
write zeros to other fields when writing PHY registers.
Fixes: 5ab43d0f8697 ("phy: socionext: add USB3 PHY driver for UniPhier SoC")
Signed-off-by: Ryuta NAKANISHI <nakanishi.ryuta@socionext.com>
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
---
drivers/phy/socionext/phy-uniphier-usb3ss.c | 10 ++++++----
1 file changed, 6 insertions(+), 4 deletions(-)
diff --git a/drivers/phy/socionext/phy-uniphier-usb3ss.c b/drivers/phy/socionext/phy-uniphier-usb3ss.c
index 7ce611c2088b..f402ed8732fd 100644
--- a/drivers/phy/socionext/phy-uniphier-usb3ss.c
+++ b/drivers/phy/socionext/phy-uniphier-usb3ss.c
@@ -22,11 +22,13 @@
#include <linux/reset.h>
#define SSPHY_TESTI 0x0
-#define SSPHY_TESTO 0x4
#define TESTI_DAT_MASK GENMASK(13, 6)
#define TESTI_ADR_MASK GENMASK(5, 1)
#define TESTI_WR_EN BIT(0)
+#define SSPHY_TESTO 0x4
+#define TESTO_DAT_MASK GENMASK(7, 0)
+
#define PHY_F(regno, msb, lsb) { (regno), (msb), (lsb) }
#define CDR_CPD_TRIM PHY_F(7, 3, 0) /* RxPLL charge pump current */
@@ -84,12 +86,12 @@ static void uniphier_u3ssphy_set_param(struct uniphier_u3ssphy_priv *priv,
val = FIELD_PREP(TESTI_DAT_MASK, 1);
val |= FIELD_PREP(TESTI_ADR_MASK, p->field.reg_no);
uniphier_u3ssphy_testio_write(priv, val);
- val = readl(priv->base + SSPHY_TESTO);
+ val = readl(priv->base + SSPHY_TESTO) & TESTO_DAT_MASK;
/* update value */
- val &= ~FIELD_PREP(TESTI_DAT_MASK, field_mask);
+ val &= ~field_mask;
data = field_mask & (p->value << p->field.lsb);
- val = FIELD_PREP(TESTI_DAT_MASK, data);
+ val = FIELD_PREP(TESTI_DAT_MASK, data | val);
val |= FIELD_PREP(TESTI_ADR_MASK, p->field.reg_no);
uniphier_u3ssphy_testio_write(priv, val);
uniphier_u3ssphy_testio_write(priv, val | TESTI_WR_EN);
--
2.7.4
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
WARNING: multiple messages have this Message-ID (diff)
From: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
To: Kishon Vijay Abraham I <kishon@ti.com>, Vinod Koul <vkoul@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>,
Ryuta NAKANISHI <nakanishi.ryuta@socionext.com>,
linux-phy@lists.infradead.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org,
Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
Subject: [PATCH] phy: uniphier-usb3ss: fix unintended writing zeros to PHY register
Date: Wed, 22 Dec 2021 14:19:29 +0900 [thread overview]
Message-ID: <1640150369-4134-1-git-send-email-hayashi.kunihiko@socionext.com> (raw)
From: Ryuta NAKANISHI <nakanishi.ryuta@socionext.com>
Similar to commit 4a90bbb478db ("phy: uniphier-pcie: Fix updating phy
parameters"), in function uniphier_u3ssphy_set_param(), unintentionally
write zeros to other fields when writing PHY registers.
Fixes: 5ab43d0f8697 ("phy: socionext: add USB3 PHY driver for UniPhier SoC")
Signed-off-by: Ryuta NAKANISHI <nakanishi.ryuta@socionext.com>
Signed-off-by: Kunihiko Hayashi <hayashi.kunihiko@socionext.com>
---
drivers/phy/socionext/phy-uniphier-usb3ss.c | 10 ++++++----
1 file changed, 6 insertions(+), 4 deletions(-)
diff --git a/drivers/phy/socionext/phy-uniphier-usb3ss.c b/drivers/phy/socionext/phy-uniphier-usb3ss.c
index 7ce611c2088b..f402ed8732fd 100644
--- a/drivers/phy/socionext/phy-uniphier-usb3ss.c
+++ b/drivers/phy/socionext/phy-uniphier-usb3ss.c
@@ -22,11 +22,13 @@
#include <linux/reset.h>
#define SSPHY_TESTI 0x0
-#define SSPHY_TESTO 0x4
#define TESTI_DAT_MASK GENMASK(13, 6)
#define TESTI_ADR_MASK GENMASK(5, 1)
#define TESTI_WR_EN BIT(0)
+#define SSPHY_TESTO 0x4
+#define TESTO_DAT_MASK GENMASK(7, 0)
+
#define PHY_F(regno, msb, lsb) { (regno), (msb), (lsb) }
#define CDR_CPD_TRIM PHY_F(7, 3, 0) /* RxPLL charge pump current */
@@ -84,12 +86,12 @@ static void uniphier_u3ssphy_set_param(struct uniphier_u3ssphy_priv *priv,
val = FIELD_PREP(TESTI_DAT_MASK, 1);
val |= FIELD_PREP(TESTI_ADR_MASK, p->field.reg_no);
uniphier_u3ssphy_testio_write(priv, val);
- val = readl(priv->base + SSPHY_TESTO);
+ val = readl(priv->base + SSPHY_TESTO) & TESTO_DAT_MASK;
/* update value */
- val &= ~FIELD_PREP(TESTI_DAT_MASK, field_mask);
+ val &= ~field_mask;
data = field_mask & (p->value << p->field.lsb);
- val = FIELD_PREP(TESTI_DAT_MASK, data);
+ val = FIELD_PREP(TESTI_DAT_MASK, data | val);
val |= FIELD_PREP(TESTI_ADR_MASK, p->field.reg_no);
uniphier_u3ssphy_testio_write(priv, val);
uniphier_u3ssphy_testio_write(priv, val | TESTI_WR_EN);
--
2.7.4
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2021-12-22 5:19 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-12-22 5:19 Kunihiko Hayashi [this message]
2021-12-22 5:19 ` [PATCH] phy: uniphier-usb3ss: fix unintended writing zeros to PHY register Kunihiko Hayashi
2021-12-22 5:19 ` Kunihiko Hayashi
2021-12-23 12:46 ` Vinod Koul
2021-12-23 12:46 ` Vinod Koul
2021-12-23 12:46 ` Vinod Koul
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1640150369-4134-1-git-send-email-hayashi.kunihiko@socionext.com \
--to=hayashi.kunihiko@socionext.com \
--cc=kishon@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-phy@lists.infradead.org \
--cc=mhiramat@kernel.org \
--cc=nakanishi.ryuta@socionext.com \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.