All of lore.kernel.org
 help / color / mirror / Atom feed
From: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
To: <agross@kernel.org>, <bjorn.andersson@linaro.org>,
	<robh+dt@kernel.org>, <linux-arm-msm@vger.kernel.org>,
	<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	<quic_rohkumar@quicinc.com>, <srinivas.kandagatla@linaro.org>,
	<dianders@chromium.org>, <swboyd@chromium.org>,
	<judyhsiao@chromium.org>
Cc: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>,
	"Venkata Prasad Potturu" <quic_potturu@quicinc.com>
Subject: [PATCH v7 4/4] arm64: dts: qcom: sc7280: Add dt nodes for sound card
Date: Wed, 13 Apr 2022 20:51:17 +0530	[thread overview]
Message-ID: <1649863277-31615-5-git-send-email-quic_srivasam@quicinc.com> (raw)
In-Reply-To: <1649863277-31615-1-git-send-email-quic_srivasam@quicinc.com>

Add dt nodes for sound card support, which is using WCD938x headset
playback, capture, I2S speaker playback and DMICs via VA macro.

Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Co-developed-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
Signed-off-by: Venkata Prasad Potturu <quic_potturu@quicinc.com>
---
 arch/arm64/boot/dts/qcom/sc7280-crd.dts  | 23 ++++++++
 arch/arm64/boot/dts/qcom/sc7280-idp.dtsi | 93 ++++++++++++++++++++++++++++++++
 2 files changed, 116 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sc7280-crd.dts b/arch/arm64/boot/dts/qcom/sc7280-crd.dts
index b944366..1e16854 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-crd.dts
+++ b/arch/arm64/boot/dts/qcom/sc7280-crd.dts
@@ -90,6 +90,29 @@ ap_ts_pen_1v8: &i2c13 {
 	us-euro-gpios = <&tlmm 81 GPIO_ACTIVE_HIGH>;
 };
 
+&sound {
+	audio-routing =
+		"IN1_HPHL", "HPHL_OUT",
+		"IN2_HPHR", "HPHR_OUT",
+		"AMIC1", "MIC BIAS1",
+		"AMIC2", "MIC BIAS2",
+		"VA DMIC0", "MIC BIAS1",
+		"VA DMIC1", "MIC BIAS1",
+		"VA DMIC2", "MIC BIAS3",
+		"VA DMIC3", "MIC BIAS3",
+		"TX SWR_ADC0", "ADC1_OUTPUT",
+		"TX SWR_ADC1", "ADC2_OUTPUT",
+		"TX SWR_ADC2", "ADC3_OUTPUT",
+		"TX SWR_DMIC0", "DMIC1_OUTPUT",
+		"TX SWR_DMIC1", "DMIC2_OUTPUT",
+		"TX SWR_DMIC2", "DMIC3_OUTPUT",
+		"TX SWR_DMIC3", "DMIC4_OUTPUT",
+		"TX SWR_DMIC4", "DMIC5_OUTPUT",
+		"TX SWR_DMIC5", "DMIC6_OUTPUT",
+		"TX SWR_DMIC6", "DMIC7_OUTPUT",
+		"TX SWR_DMIC7", "DMIC8_OUTPUT";
+};
+
 &tlmm {
 	tp_int_odl: tp-int-odl {
 		pins = "gpio7";
diff --git a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
index cf62d06..a7c884a 100644
--- a/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
+++ b/arch/arm64/boot/dts/qcom/sc7280-idp.dtsi
@@ -84,6 +84,99 @@
 		pinctrl-names = "default";
 		pinctrl-0 = <&nvme_pwren>;
 	};
+
+	sound: sound {
+		compatible = "google,sc7280-herobrine";
+		model = "sc7280-wcd938x-max98360a-1mic";
+
+		audio-routing =
+			"IN1_HPHL", "HPHL_OUT",
+			"IN2_HPHR", "HPHR_OUT",
+			"AMIC1", "MIC BIAS1",
+			"AMIC2", "MIC BIAS2",
+			"VA DMIC0", "MIC BIAS3",
+			"VA DMIC1", "MIC BIAS3",
+			"VA DMIC2", "MIC BIAS1",
+			"VA DMIC3", "MIC BIAS1",
+			"TX SWR_ADC0", "ADC1_OUTPUT",
+			"TX SWR_ADC1", "ADC2_OUTPUT",
+			"TX SWR_ADC2", "ADC3_OUTPUT",
+			"TX SWR_DMIC0", "DMIC1_OUTPUT",
+			"TX SWR_DMIC1", "DMIC2_OUTPUT",
+			"TX SWR_DMIC2", "DMIC3_OUTPUT",
+			"TX SWR_DMIC3", "DMIC4_OUTPUT",
+			"TX SWR_DMIC4", "DMIC5_OUTPUT",
+			"TX SWR_DMIC5", "DMIC6_OUTPUT",
+			"TX SWR_DMIC6", "DMIC7_OUTPUT",
+			"TX SWR_DMIC7", "DMIC8_OUTPUT";
+
+		qcom,msm-mbhc-hphl-swh = <1>;
+		qcom,msm-mbhc-gnd-swh = <1>;
+
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#sound-dai-cells = <0>;
+
+		dai-link@1 {
+			link-name = "MAX98360A";
+			reg = <MI2S_SECONDARY>;
+			cpu {
+				sound-dai = <&lpass_cpu MI2S_SECONDARY>;
+			};
+
+			codec {
+				sound-dai = <&max98360a>;
+			};
+		};
+
+		dai-link@5 {
+			link-name = "DisplayPort";
+			reg = <LPASS_DP_RX>;
+			cpu {
+				sound-dai = <&lpass_cpu LPASS_DP_RX>;
+			};
+
+			codec {
+				sound-dai = <&mdss_dp>;
+			};
+		};
+
+		dai-link@6 {
+			link-name = "WCD9385 Playback";
+			reg = <LPASS_CDC_DMA_RX0>;
+			cpu {
+				sound-dai = <&lpass_cpu LPASS_CDC_DMA_RX0>;
+			};
+
+			codec {
+				sound-dai = <&wcd938x 0>, <&swr0 0>, <&lpass_rx_macro 0>;
+			};
+		};
+
+		dai-link@19 {
+			link-name = "WCD9385 Capture";
+			reg = <LPASS_CDC_DMA_TX3>;
+			cpu {
+				sound-dai = <&lpass_cpu LPASS_CDC_DMA_TX3>;
+			};
+
+			codec {
+				sound-dai = <&wcd938x 1>, <&swr1 0>, <&lpass_tx_macro 0>;
+			};
+		};
+
+		dai-link@25 {
+			link-name = "DMIC";
+			reg = <LPASS_CDC_DMA_VA_TX0>;
+			cpu {
+				sound-dai = <&lpass_cpu LPASS_CDC_DMA_VA_TX0>;
+			};
+
+			codec {
+				sound-dai = <&lpass_va_macro 0>;
+			};
+		};
+	};
 };
 
 &apps_rsc {
-- 
2.7.4


  parent reply	other threads:[~2022-04-13 15:22 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2022-04-13 15:21 [PATCH v7 0/4] Add soundcard support for sc7280 based platforms Srinivasa Rao Mandadapu
2022-04-13 15:21 ` [PATCH v7 1/4] arm64: dts: qcom: sc7280: Add nodes for soundwire and va tx rx digital macro codecs Srinivasa Rao Mandadapu
2022-04-13 18:54   ` Matthias Kaehlcke
2022-04-18 13:54     ` Srinivasa Rao Mandadapu
2022-04-13 15:21 ` [PATCH v7 2/4] arm64: dts: qcom: sc7280: Add nodes for wcd9385 and max98360a codec Srinivasa Rao Mandadapu
2022-04-13 19:35   ` Matthias Kaehlcke
2022-04-18 14:06     ` Srinivasa Rao Mandadapu
2022-04-13 15:21 ` [PATCH v7 3/4] arm64: dts: qcom: sc7280: Add lpass cpu node Srinivasa Rao Mandadapu
2022-04-13 20:37   ` Matthias Kaehlcke
2022-04-15  1:56   ` Stephen Boyd
2022-04-13 15:21 ` Srinivasa Rao Mandadapu [this message]
2022-04-13 21:23   ` [PATCH v7 4/4] arm64: dts: qcom: sc7280: Add dt nodes for sound card Matthias Kaehlcke
2022-04-18 14:09     ` Srinivasa Rao Mandadapu
2022-04-18 15:31       ` Matthias Kaehlcke

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1649863277-31615-5-git-send-email-quic_srivasam@quicinc.com \
    --to=quic_srivasam@quicinc.com \
    --cc=agross@kernel.org \
    --cc=bjorn.andersson@linaro.org \
    --cc=devicetree@vger.kernel.org \
    --cc=dianders@chromium.org \
    --cc=judyhsiao@chromium.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=quic_potturu@quicinc.com \
    --cc=quic_rohkumar@quicinc.com \
    --cc=robh+dt@kernel.org \
    --cc=srinivas.kandagatla@linaro.org \
    --cc=swboyd@chromium.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.