From: Kuogee Hsieh <quic_khsieh@quicinc.com> To: <dri-devel@lists.freedesktop.org>, <robdclark@gmail.com>, <sean@poorly.run>, <swboyd@chromium.org>, <dianders@chromium.org>, <vkoul@kernel.org>, <daniel@ffwll.ch>, <airlied@linux.ie>, <agross@kernel.org>, <dmitry.baryshkov@linaro.org>, <bjorn.andersson@linaro.org> Cc: Kuogee Hsieh <quic_khsieh@quicinc.com>, <quic_abhinavk@quicinc.com>, <quic_aravindh@quicinc.com>, <quic_sbillaka@quicinc.com>, <freedreno@lists.freedesktop.org>, <linux-arm-msm@vger.kernel.org>, <linux-kernel@vger.kernel.org> Subject: [PATCH v13 1/3] phy: qcom-edp: add regulator_set_load to edp phy Date: Wed, 25 May 2022 14:02:18 -0700 [thread overview] Message-ID: <1653512540-21956-2-git-send-email-quic_khsieh@quicinc.com> (raw) In-Reply-To: <1653512540-21956-1-git-send-email-quic_khsieh@quicinc.com> This patch add regulator_set_load() before enable regulator at eDP phy driver. Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> --- drivers/phy/qualcomm/phy-qcom-edp.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/drivers/phy/qualcomm/phy-qcom-edp.c b/drivers/phy/qualcomm/phy-qcom-edp.c index cacd32f..7e357078 100644 --- a/drivers/phy/qualcomm/phy-qcom-edp.c +++ b/drivers/phy/qualcomm/phy-qcom-edp.c @@ -639,6 +639,18 @@ static int qcom_edp_phy_probe(struct platform_device *pdev) if (ret) return ret; + ret = regulator_set_load(edp->supplies[0].consumer, 21800); /* 1.2 V vdda-phy */ + if (ret) { + dev_err(dev, "failed to set load at %s\n", edp->supplies[0].supply); + return ret; + } + + ret = regulator_set_load(edp->supplies[1].consumer, 36000); /* 0.9 V vdda-pll */ + if (ret) { + dev_err(dev, "failed to set load at %s\n", edp->supplies[1].supply); + return ret; + } + ret = qcom_edp_clks_register(edp, pdev->dev.of_node); if (ret) return ret; -- The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project
WARNING: multiple messages have this Message-ID (diff)
From: Kuogee Hsieh <quic_khsieh@quicinc.com> To: <dri-devel@lists.freedesktop.org>, <robdclark@gmail.com>, <sean@poorly.run>, <swboyd@chromium.org>, <dianders@chromium.org>, <vkoul@kernel.org>, <daniel@ffwll.ch>, <airlied@linux.ie>, <agross@kernel.org>, <dmitry.baryshkov@linaro.org>, <bjorn.andersson@linaro.org> Cc: quic_sbillaka@quicinc.com, linux-arm-msm@vger.kernel.org, quic_abhinavk@quicinc.com, Kuogee Hsieh <quic_khsieh@quicinc.com>, quic_aravindh@quicinc.com, freedreno@lists.freedesktop.org, linux-kernel@vger.kernel.org Subject: [PATCH v13 1/3] phy: qcom-edp: add regulator_set_load to edp phy Date: Wed, 25 May 2022 14:02:18 -0700 [thread overview] Message-ID: <1653512540-21956-2-git-send-email-quic_khsieh@quicinc.com> (raw) In-Reply-To: <1653512540-21956-1-git-send-email-quic_khsieh@quicinc.com> This patch add regulator_set_load() before enable regulator at eDP phy driver. Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com> Reviewed-by: Douglas Anderson <dianders@chromium.org> --- drivers/phy/qualcomm/phy-qcom-edp.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/drivers/phy/qualcomm/phy-qcom-edp.c b/drivers/phy/qualcomm/phy-qcom-edp.c index cacd32f..7e357078 100644 --- a/drivers/phy/qualcomm/phy-qcom-edp.c +++ b/drivers/phy/qualcomm/phy-qcom-edp.c @@ -639,6 +639,18 @@ static int qcom_edp_phy_probe(struct platform_device *pdev) if (ret) return ret; + ret = regulator_set_load(edp->supplies[0].consumer, 21800); /* 1.2 V vdda-phy */ + if (ret) { + dev_err(dev, "failed to set load at %s\n", edp->supplies[0].supply); + return ret; + } + + ret = regulator_set_load(edp->supplies[1].consumer, 36000); /* 0.9 V vdda-pll */ + if (ret) { + dev_err(dev, "failed to set load at %s\n", edp->supplies[1].supply); + return ret; + } + ret = qcom_edp_clks_register(edp, pdev->dev.of_node); if (ret) return ret; -- The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project
next prev parent reply other threads:[~2022-05-25 21:02 UTC|newest] Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top 2022-05-25 21:02 [PATCH v13 0/3] eDP/DP Phy vdda realted function Kuogee Hsieh 2022-05-25 21:02 ` Kuogee Hsieh 2022-05-25 21:02 ` Kuogee Hsieh [this message] 2022-05-25 21:02 ` [PATCH v13 1/3] phy: qcom-edp: add regulator_set_load to edp phy Kuogee Hsieh 2022-05-26 0:00 ` Dmitry Baryshkov 2022-05-26 0:00 ` Dmitry Baryshkov 2022-05-27 0:07 ` Stephen Boyd 2022-05-27 0:07 ` Stephen Boyd 2022-06-06 13:48 ` Bjorn Andersson 2022-06-06 13:48 ` Bjorn Andersson 2022-05-25 21:02 ` [PATCH v13 2/3] phy: qcom-qmp: add regulator_set_load to dp phy Kuogee Hsieh 2022-05-25 21:02 ` Kuogee Hsieh 2022-05-25 21:02 ` [PATCH v13 3/3] drm/msm/dp: delete vdda regulator related functions from eDP/DP controller Kuogee Hsieh 2022-05-25 21:02 ` Kuogee Hsieh 2022-06-17 0:02 ` [PATCH v13 0/3] eDP/DP Phy vdda realted function Vinod Koul 2022-06-17 0:02 ` Vinod Koul 2022-06-20 20:07 ` Kuogee Hsieh 2022-06-20 20:07 ` Kuogee Hsieh 2022-06-20 20:43 ` Kuogee Hsieh 2022-06-20 20:43 ` Kuogee Hsieh 2022-06-21 4:41 ` Vinod Koul 2022-06-21 4:41 ` Vinod Koul
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1653512540-21956-2-git-send-email-quic_khsieh@quicinc.com \ --to=quic_khsieh@quicinc.com \ --cc=agross@kernel.org \ --cc=airlied@linux.ie \ --cc=bjorn.andersson@linaro.org \ --cc=daniel@ffwll.ch \ --cc=dianders@chromium.org \ --cc=dmitry.baryshkov@linaro.org \ --cc=dri-devel@lists.freedesktop.org \ --cc=freedreno@lists.freedesktop.org \ --cc=linux-arm-msm@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=quic_abhinavk@quicinc.com \ --cc=quic_aravindh@quicinc.com \ --cc=quic_sbillaka@quicinc.com \ --cc=robdclark@gmail.com \ --cc=sean@poorly.run \ --cc=swboyd@chromium.org \ --cc=vkoul@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.