From: Zijun Hu <quic_zijuhu@quicinc.com>
To: <marcel@holtmann.org>, <johan.hedberg@gmail.com>,
<luiz.dentz@gmail.com>, <davem@davemloft.net>,
<edumazet@google.com>, <kuba@kernel.org>, <pabeni@redhat.com>
Cc: <linux-kernel@vger.kernel.org>, <linux-bluetooth@vger.kernel.org>,
<linux-arm-msm@vger.kernel.org>,
Zijun Hu <quic_zijuhu@quicinc.com>
Subject: [PATCH v2] Bluetooth: Fix CVSD SCO setup failure
Date: Thu, 9 Jun 2022 19:09:34 +0800 [thread overview]
Message-ID: <1654772974-10357-1-git-send-email-quic_zijuhu@quicinc.com> (raw)
It will set up SCO after all CVSD eSCO attempts failure, but
still fails to set up SCO finally due to wrong D1/D0 @retrans_effort
within @esco_param_cvsd, so change it from 0x1 to 0xff to avoid
Invalid HCI Command Parameters error.
< HCI Command: Setup Synchrono.. (0x01|0x0028) plen 17 #3427
Handle: 3
Transmit bandwidth: 8000
Receive bandwidth: 8000
Max latency: 65535
Setting: 0x0060
Input Coding: Linear
Input Data Format: 2's complement
Input Sample Size: 16-bit
# of bits padding at MSB: 0
Air Coding Format: CVSD
Retransmission effort: Optimize for power consumption (0x01)
Packet type: 0x03c4
HV3 may be used
2-EV3 may not be used
3-EV3 may not be used
2-EV5 may not be used
3-EV5 may not be used
> HCI Event: Command Status (0x0f) plen 4 #3428
Setup Synchronous Connection (0x01|0x0028) ncmd 1
Status: Success (0x00)
> HCI Event: Synchronous Connect Comp.. (0x2c) plen 17 #3429
Status: Invalid HCI Command Parameters (0x12)
Handle: 0
Address: 14:3F:A6:47:56:15 (OUI 14-3F-A6)
Link type: SCO (0x00)
Transmission interval: 0x00
Retransmission window: 0x00
RX packet length: 0
TX packet length: 0
Air mode: u-law log (0x00)
Signed-off-by: Zijun Hu <quic_zijuhu@quicinc.com>
---
net/bluetooth/hci_conn.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/net/bluetooth/hci_conn.c b/net/bluetooth/hci_conn.c
index 7829433d54c1..2627d5ac15d6 100644
--- a/net/bluetooth/hci_conn.c
+++ b/net/bluetooth/hci_conn.c
@@ -45,8 +45,8 @@ static const struct sco_param esco_param_cvsd[] = {
{ EDR_ESCO_MASK & ~ESCO_2EV3, 0x000a, 0x01 }, /* S3 */
{ EDR_ESCO_MASK & ~ESCO_2EV3, 0x0007, 0x01 }, /* S2 */
{ EDR_ESCO_MASK | ESCO_EV3, 0x0007, 0x01 }, /* S1 */
- { EDR_ESCO_MASK | ESCO_HV3, 0xffff, 0x01 }, /* D1 */
- { EDR_ESCO_MASK | ESCO_HV1, 0xffff, 0x01 }, /* D0 */
+ { EDR_ESCO_MASK | ESCO_HV3, 0xffff, 0xff }, /* D1 */
+ { EDR_ESCO_MASK | ESCO_HV1, 0xffff, 0xff }, /* D0 */
};
static const struct sco_param sco_param_cvsd[] = {
--
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project
next reply other threads:[~2022-06-09 11:09 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-06-09 11:09 Zijun Hu [this message]
2022-06-09 11:57 ` [v2] Bluetooth: Fix CVSD SCO setup failure bluez.test.bot
2022-06-24 15:12 ` [PATCH v2] " quic_zijuhu
2022-07-11 2:03 ` quic_zijuhu
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1654772974-10357-1-git-send-email-quic_zijuhu@quicinc.com \
--to=quic_zijuhu@quicinc.com \
--cc=davem@davemloft.net \
--cc=edumazet@google.com \
--cc=johan.hedberg@gmail.com \
--cc=kuba@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-bluetooth@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=luiz.dentz@gmail.com \
--cc=marcel@holtmann.org \
--cc=pabeni@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.