From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> To: horms@verge.net.au, linux-renesas-soc@vger.kernel.org, robh+dt@kernel.org, pawel.moll@arm.com, mark.rutland@arm.com, ijc+devicetree@hellion.org.uk, galak@codeaurora.org, devicetree@vger.kernel.org Cc: magnus.damm@gmail.com, linux@arm.linux.org.uk, linux-arm-kernel@lists.infradead.org Subject: [PATCH v3 12/12] ARM: dts: blanche: add Ethernet support Date: Thu, 09 Jun 2016 00:36:31 +0300 [thread overview] Message-ID: <1684757.OTRo8llZyo@wasted.cogentembedded.com> (raw) In-Reply-To: <12536856.AsKMEpuejQ@wasted.cogentembedded.com> R8A7792 SoC doesn't have the EtherMAC core, so SMSC LAN89218 Ethernet chip was used instead on the Blanche board; this chip is compatible with SMSC LAN9115 for which there's a (device tree aware) driver. Describe the chip in the Blanche device tree; enable DHCP and NFS root in the kernel command line for the kernel booting. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-by: Simon Horman <horms+renesas@verge.net.au> --- Changes in version 3: - refreshed the patch. Changes in version 2: - added Simon's ACK. arch/arm/boot/dts/r8a7792-blanche.dts | 23 ++++++++++++++++++++++- 1 file changed, 22 insertions(+), 1 deletion(-) Index: renesas/arch/arm/boot/dts/r8a7792-blanche.dts =================================================================== --- renesas.orig/arch/arm/boot/dts/r8a7792-blanche.dts +++ renesas/arch/arm/boot/dts/r8a7792-blanche.dts @@ -22,7 +22,7 @@ }; chosen { - bootargs = "ignore_loglevel"; + bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; stdout-path = "serial0:115200n8"; }; @@ -30,6 +30,27 @@ device_type = "memory"; reg = <0 0x40000000 0 0x40000000>; }; + + d3_3v: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "D3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ethernet@18000000 { + compatible = "smsc,lan89218", "smsc,lan9115"; + reg = <0 0x18000000 0 0x100>; + phy-mode = "mii"; + interrupt-parent = <&irqc>; + interrupts = <0 IRQ_TYPE_EDGE_FALLING>; + smsc,irq-push-pull; + reg-io-width = <4>; + vddvario-supply = <&d3_3v>; + vdd33a-supply = <&d3_3v>; + }; }; &extal_clk {
WARNING: multiple messages have this Message-ID (diff)
From: sergei.shtylyov@cogentembedded.com (Sergei Shtylyov) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH v3 12/12] ARM: dts: blanche: add Ethernet support Date: Thu, 09 Jun 2016 00:36:31 +0300 [thread overview] Message-ID: <1684757.OTRo8llZyo@wasted.cogentembedded.com> (raw) In-Reply-To: <12536856.AsKMEpuejQ@wasted.cogentembedded.com> R8A7792 SoC doesn't have the EtherMAC core, so SMSC LAN89218 Ethernet chip was used instead on the Blanche board; this chip is compatible with SMSC LAN9115 for which there's a (device tree aware) driver. Describe the chip in the Blanche device tree; enable DHCP and NFS root in the kernel command line for the kernel booting. Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Acked-by: Simon Horman <horms+renesas@verge.net.au> --- Changes in version 3: - refreshed the patch. Changes in version 2: - added Simon's ACK. arch/arm/boot/dts/r8a7792-blanche.dts | 23 ++++++++++++++++++++++- 1 file changed, 22 insertions(+), 1 deletion(-) Index: renesas/arch/arm/boot/dts/r8a7792-blanche.dts =================================================================== --- renesas.orig/arch/arm/boot/dts/r8a7792-blanche.dts +++ renesas/arch/arm/boot/dts/r8a7792-blanche.dts @@ -22,7 +22,7 @@ }; chosen { - bootargs = "ignore_loglevel"; + bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp"; stdout-path = "serial0:115200n8"; }; @@ -30,6 +30,27 @@ device_type = "memory"; reg = <0 0x40000000 0 0x40000000>; }; + + d3_3v: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "D3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ethernet at 18000000 { + compatible = "smsc,lan89218", "smsc,lan9115"; + reg = <0 0x18000000 0 0x100>; + phy-mode = "mii"; + interrupt-parent = <&irqc>; + interrupts = <0 IRQ_TYPE_EDGE_FALLING>; + smsc,irq-push-pull; + reg-io-width = <4>; + vddvario-supply = <&d3_3v>; + vdd33a-supply = <&d3_3v>; + }; }; &extal_clk {
next prev parent reply other threads:[~2016-06-08 21:36 UTC|newest] Thread overview: 32+ messages / expand[flat|nested] mbox.gz Atom feed top 2016-06-08 21:01 [PATCH v3 00/12] Add R8A7792/Blanche board support Sergei Shtylyov 2016-06-08 21:01 ` Sergei Shtylyov 2016-06-08 21:04 ` [PATCH v3 01/12] ARM: shmobile: r8a7792: add clock index macros Sergei Shtylyov [not found] ` <2256036.Aah0Fxjv7E-gHKXc3Y1Z8zGSmamagVegGFoWSdPRAKMAL8bYrjMMd8@public.gmane.org> 2016-06-09 9:47 ` Geert Uytterhoeven 2016-06-09 9:47 ` Geert Uytterhoeven 2016-06-08 21:07 ` [PATCH v3 02/12] ARM: shmobile: r8a7792: add power domain " Sergei Shtylyov 2016-06-08 21:09 ` [PATCH v3 03/12] soc: renesas: rcar-sysc: add R8A7792 support Sergei Shtylyov 2016-06-08 21:11 ` [PATCH v3 04/12] ARM: shmobile: r8a7792: basic SoC support Sergei Shtylyov 2016-06-08 21:11 ` Sergei Shtylyov 2016-06-08 21:15 ` [PATCH v3 05/12] ARM: shmobile: r8a7792: add SMP support Sergei Shtylyov 2016-06-08 21:15 ` Sergei Shtylyov 2016-06-09 8:44 ` Geert Uytterhoeven 2016-06-09 8:44 ` Geert Uytterhoeven 2016-06-09 11:22 ` Sergei Shtylyov 2016-06-09 11:22 ` Sergei Shtylyov 2016-06-08 21:17 ` [PATCH v3 06/12] ARM: dts: r8a7792: initial SoC device tree Sergei Shtylyov 2016-06-08 21:17 ` Sergei Shtylyov 2016-06-09 10:05 ` Geert Uytterhoeven 2016-06-09 10:05 ` Geert Uytterhoeven 2016-06-09 20:36 ` Sergei Shtylyov 2016-06-09 20:36 ` Sergei Shtylyov 2016-06-08 21:28 ` [PATCH v3 07/12] ARM: dts: r8a7792: add SYS-DMAC support Sergei Shtylyov 2016-06-08 21:28 ` Sergei Shtylyov 2016-06-08 21:30 ` [PATCH v3 08/12] ARM: dts: r8a7792: add [H]SCIF support Sergei Shtylyov 2016-06-08 21:30 ` Sergei Shtylyov 2016-06-08 21:31 ` [PATCH v3 09/12] ARM: dts: r8a7792: add IRQC support Sergei Shtylyov 2016-06-08 21:31 ` Sergei Shtylyov 2016-06-08 21:33 ` [PATCH v3 10/12] DT: arm: shmobile: document Blanche board Sergei Shtylyov 2016-06-08 21:35 ` [PATCH v3 11/12] ARM: dts: blanche: initial device tree Sergei Shtylyov 2016-06-08 21:35 ` Sergei Shtylyov 2016-06-08 21:36 ` Sergei Shtylyov [this message] 2016-06-08 21:36 ` [PATCH v3 12/12] ARM: dts: blanche: add Ethernet support Sergei Shtylyov
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1684757.OTRo8llZyo@wasted.cogentembedded.com \ --to=sergei.shtylyov@cogentembedded.com \ --cc=devicetree@vger.kernel.org \ --cc=galak@codeaurora.org \ --cc=horms@verge.net.au \ --cc=ijc+devicetree@hellion.org.uk \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-renesas-soc@vger.kernel.org \ --cc=linux@arm.linux.org.uk \ --cc=magnus.damm@gmail.com \ --cc=mark.rutland@arm.com \ --cc=pawel.moll@arm.com \ --cc=robh+dt@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.