All of lore.kernel.org
 help / color / mirror / Atom feed
From: "kishore kadiyala" <kishore.kadiyala@ti.com>
To: linux-omap@vger.kernel.org
Cc: khilman@deeprootsystems.com, tony@atomide.com, b-cousson@ti.com
Subject: [PATCH 06/10] [PM-WIP-UART] OMAP4 hwmod : Adding hwmod data for UART
Date: Sat, 21 Aug 2010 01:46:43 +0530 (IST)	[thread overview]
Message-ID: <16865.10.24.255.18.1282335403.squirrel@dbdmail.itg.ti.com> (raw)

From: Benoit Cousson <b-cousson@ti.com>
Adding HWMOD data for UART on OMAP4

Cc: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Benoit Cousson <b-cousson@ti.com>
Signed-off-by: Kishore Kadiyala <kishore.kadiyala@ti.com>
---
 arch/arm/mach-omap2/omap_hwmod_44xx_data.c |  234 ++++++++++++++++++++++++++++
 1 files changed, 234 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
index db62b84..8266b5c 100644
--- a/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
+++ b/arch/arm/mach-omap2/omap_hwmod_44xx_data.c
@@ -778,6 +778,235 @@ static struct omap_hwmod omap44xx_mpu_hwmod = {
 	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
 };

+/*
+ * 'uart' class
+ * universal asynchronous receiver/transmitter (uart)
+ */
+
+static struct omap_hwmod_class_sysconfig omap44xx_uart_sysc = {
+	.rev_offs	= 0x0050,
+	.sysc_offs	= 0x0054,
+	.syss_offs	= 0x0058,
+	.sysc_flags	= (SYSC_HAS_ENAWAKEUP | SYSC_HAS_SIDLEMODE |
+			   SYSC_HAS_SOFTRESET | SYSC_HAS_AUTOIDLE),
+	.idlemodes	= (SIDLE_FORCE | SIDLE_NO | SIDLE_SMART),
+	.sysc_fields	= &omap_hwmod_sysc_type1,
+};
+
+static struct omap_hwmod_class omap44xx_uart_hwmod_class = {
+	.name = "uart",
+	.sysc = &omap44xx_uart_sysc,
+};
+
+/* uart1 */
+static struct omap_hwmod omap44xx_uart1_hwmod;
+static struct omap_hwmod_irq_info omap44xx_uart1_irqs[] = {
+	{ .irq = 72 + OMAP44XX_IRQ_GIC_START },
+};
+
+static struct omap_hwmod_dma_info omap44xx_uart1_sdma_reqs[] = {
+	{ .name = "tx", .dma_req = 48 + OMAP44XX_DMA_REQ_START },
+	{ .name = "rx", .dma_req = 49 + OMAP44XX_DMA_REQ_START },
+};
+
+static struct omap_hwmod_addr_space omap44xx_uart1_addrs[] = {
+	{
+		.pa_start	= 0x4806a000,
+		.pa_end		= 0x4806a0ff,
+		.flags		= ADDR_TYPE_RT
+	},
+};
+
+/* l4_per -> uart1 */
+static struct omap_hwmod_ocp_if omap44xx_l4_per__uart1 = {
+	.master		= &omap44xx_l4_per_hwmod,
+	.slave		= &omap44xx_uart1_hwmod,
+	.clk		= "l4_div_ck",
+	.addr		= omap44xx_uart1_addrs,
+	.addr_cnt	= ARRAY_SIZE(omap44xx_uart1_addrs),
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* uart1 slave ports */
+static struct omap_hwmod_ocp_if *omap44xx_uart1_slaves[] = {
+	&omap44xx_l4_per__uart1,
+};
+
+static struct omap_hwmod omap44xx_uart1_hwmod = {
+	.name		= "uart1",
+	.class		= &omap44xx_uart_hwmod_class,
+	.mpu_irqs	= omap44xx_uart1_irqs,
+	.mpu_irqs_cnt	= ARRAY_SIZE(omap44xx_uart1_irqs),
+	.sdma_reqs	= omap44xx_uart1_sdma_reqs,
+	.sdma_reqs_cnt	= ARRAY_SIZE(omap44xx_uart1_sdma_reqs),
+	.main_clk	= "uart1_fck",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_reg = OMAP4430_CM_L4PER_UART1_CLKCTRL,
+		},
+	},
+	.slaves		= omap44xx_uart1_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap44xx_uart1_slaves),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+/* uart2 */
+static struct omap_hwmod omap44xx_uart2_hwmod;
+static struct omap_hwmod_irq_info omap44xx_uart2_irqs[] = {
+	{ .irq = 73 + OMAP44XX_IRQ_GIC_START },
+};
+
+static struct omap_hwmod_dma_info omap44xx_uart2_sdma_reqs[] = {
+	{ .name = "tx", .dma_req = 50 + OMAP44XX_DMA_REQ_START },
+	{ .name = "rx", .dma_req = 51 + OMAP44XX_DMA_REQ_START },
+};
+
+static struct omap_hwmod_addr_space omap44xx_uart2_addrs[] = {
+	{
+		.pa_start	= 0x4806c000,
+		.pa_end		= 0x4806c0ff,
+		.flags		= ADDR_TYPE_RT
+	},
+};
+
+/* l4_per -> uart2 */
+static struct omap_hwmod_ocp_if omap44xx_l4_per__uart2 = {
+	.master		= &omap44xx_l4_per_hwmod,
+	.slave		= &omap44xx_uart2_hwmod,
+	.clk		= "l4_div_ck",
+	.addr		= omap44xx_uart2_addrs,
+	.addr_cnt	= ARRAY_SIZE(omap44xx_uart2_addrs),
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* uart2 slave ports */
+static struct omap_hwmod_ocp_if *omap44xx_uart2_slaves[] = {
+	&omap44xx_l4_per__uart2,
+};
+
+static struct omap_hwmod omap44xx_uart2_hwmod = {
+	.name		= "uart2",
+	.class		= &omap44xx_uart_hwmod_class,
+	.mpu_irqs	= omap44xx_uart2_irqs,
+	.mpu_irqs_cnt	= ARRAY_SIZE(omap44xx_uart2_irqs),
+	.sdma_reqs	= omap44xx_uart2_sdma_reqs,
+	.sdma_reqs_cnt	= ARRAY_SIZE(omap44xx_uart2_sdma_reqs),
+	.main_clk	= "uart2_fck",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_reg = OMAP4430_CM_L4PER_UART2_CLKCTRL,
+		},
+	},
+	.slaves		= omap44xx_uart2_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap44xx_uart2_slaves),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+/* uart3 */
+static struct omap_hwmod omap44xx_uart3_hwmod;
+static struct omap_hwmod_irq_info omap44xx_uart3_irqs[] = {
+	{ .irq = 74 + OMAP44XX_IRQ_GIC_START },
+};
+
+static struct omap_hwmod_dma_info omap44xx_uart3_sdma_reqs[] = {
+	{ .name = "tx", .dma_req = 52 + OMAP44XX_DMA_REQ_START },
+	{ .name = "rx", .dma_req = 53 + OMAP44XX_DMA_REQ_START },
+};
+
+static struct omap_hwmod_addr_space omap44xx_uart3_addrs[] = {
+	{
+		.pa_start	= 0x48020000,
+		.pa_end		= 0x480200ff,
+		.flags		= ADDR_TYPE_RT
+	},
+};
+
+/* l4_per -> uart3 */
+static struct omap_hwmod_ocp_if omap44xx_l4_per__uart3 = {
+	.master		= &omap44xx_l4_per_hwmod,
+	.slave		= &omap44xx_uart3_hwmod,
+	.clk		= "l4_div_ck",
+	.addr		= omap44xx_uart3_addrs,
+	.addr_cnt	= ARRAY_SIZE(omap44xx_uart3_addrs),
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* uart3 slave ports */
+static struct omap_hwmod_ocp_if *omap44xx_uart3_slaves[] = {
+	&omap44xx_l4_per__uart3,
+};
+
+static struct omap_hwmod omap44xx_uart3_hwmod = {
+	.name		= "uart3",
+	.class		= &omap44xx_uart_hwmod_class,
+	.flags		= (HWMOD_INIT_NO_IDLE | HWMOD_INIT_NO_RESET),
+	.mpu_irqs	= omap44xx_uart3_irqs,
+	.mpu_irqs_cnt	= ARRAY_SIZE(omap44xx_uart3_irqs),
+	.sdma_reqs	= omap44xx_uart3_sdma_reqs,
+	.sdma_reqs_cnt	= ARRAY_SIZE(omap44xx_uart3_sdma_reqs),
+	.main_clk	= "uart3_fck",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_reg = OMAP4430_CM_L4PER_UART3_CLKCTRL,
+		},
+	},
+	.slaves		= omap44xx_uart3_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap44xx_uart3_slaves),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
+/* uart4 */
+static struct omap_hwmod omap44xx_uart4_hwmod;
+static struct omap_hwmod_irq_info omap44xx_uart4_irqs[] = {
+	{ .irq = 70 + OMAP44XX_IRQ_GIC_START },
+};
+
+static struct omap_hwmod_dma_info omap44xx_uart4_sdma_reqs[] = {
+	{ .name = "tx", .dma_req = 54 + OMAP44XX_DMA_REQ_START },
+	{ .name = "rx", .dma_req = 55 + OMAP44XX_DMA_REQ_START },
+};
+
+static struct omap_hwmod_addr_space omap44xx_uart4_addrs[] = {
+	{
+		.pa_start	= 0x4806e000,
+		.pa_end		= 0x4806e0ff,
+		.flags		= ADDR_TYPE_RT
+	},
+};
+
+/* l4_per -> uart4 */
+static struct omap_hwmod_ocp_if omap44xx_l4_per__uart4 = {
+	.master		= &omap44xx_l4_per_hwmod,
+	.slave		= &omap44xx_uart4_hwmod,
+	.clk		= "l4_div_ck",
+	.addr		= omap44xx_uart4_addrs,
+	.addr_cnt	= ARRAY_SIZE(omap44xx_uart4_addrs),
+	.user		= OCP_USER_MPU | OCP_USER_SDMA,
+};
+
+/* uart4 slave ports */
+static struct omap_hwmod_ocp_if *omap44xx_uart4_slaves[] = {
+	&omap44xx_l4_per__uart4,
+};
+
+static struct omap_hwmod omap44xx_uart4_hwmod = {
+	.name		= "uart4",
+	.class		= &omap44xx_uart_hwmod_class,
+	.mpu_irqs	= omap44xx_uart4_irqs,
+	.mpu_irqs_cnt	= ARRAY_SIZE(omap44xx_uart4_irqs),
+	.sdma_reqs	= omap44xx_uart4_sdma_reqs,
+	.sdma_reqs_cnt	= ARRAY_SIZE(omap44xx_uart4_sdma_reqs),
+	.main_clk	= "uart4_fck",
+	.prcm = {
+		.omap4 = {
+			.clkctrl_reg = OMAP4430_CM_L4PER_UART4_CLKCTRL,
+		},
+	},
+	.slaves		= omap44xx_uart4_slaves,
+	.slaves_cnt	= ARRAY_SIZE(omap44xx_uart4_slaves),
+	.omap_chip	= OMAP_CHIP_INIT(CHIP_IS_OMAP4430),
+};
+
 static __initdata struct omap_hwmod *omap44xx_hwmods[] = {
 	/* dmm class */
 	&omap44xx_dmm_hwmod,
@@ -801,6 +1030,11 @@ static __initdata struct omap_hwmod *omap44xx_hwmods[] = {
 	&omap44xx_mmc3_hwmod,
 	&omap44xx_mmc4_hwmod,
 	&omap44xx_mmc5_hwmod,
+	/* uart class */
+	&omap44xx_uart1_hwmod,
+	&omap44xx_uart2_hwmod,
+	&omap44xx_uart3_hwmod,
+	&omap44xx_uart4_hwmod,
 	/* mpu class */
 	&omap44xx_mpu_hwmod,
 	NULL,
-- 
1.7.0.4



             reply	other threads:[~2010-08-20 20:16 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-08-20 20:16 kishore kadiyala [this message]
2010-08-26 23:17 ` [PATCH 06/10] [PM-WIP-UART] OMAP4 hwmod : Adding hwmod data for UART Kevin Hilman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=16865.10.24.255.18.1282335403.squirrel@dbdmail.itg.ti.com \
    --to=kishore.kadiyala@ti.com \
    --cc=b-cousson@ti.com \
    --cc=khilman@deeprootsystems.com \
    --cc=linux-omap@vger.kernel.org \
    --cc=tony@atomide.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.