All of lore.kernel.org
 help / color / mirror / Atom feed
From: Dan Williams <dan.j.williams@intel.com>
To: linux-cxl@vger.kernel.org
Subject: [PATCH v2 06/12] cxl/memdev: Make mailbox functionality optional
Date: Wed, 14 Jun 2023 18:30:07 -0700	[thread overview]
Message-ID: <168679260782.3436160.7587293613945445365.stgit@dwillia2-xfh.jf.intel.com> (raw)
In-Reply-To: <168679257511.3436160.9707734364766526576.stgit@dwillia2-xfh.jf.intel.com>

In support of the Linux CXL core scaling for a wider set of CXL devices,
allow for the creation of memdevs with some memory device capabilities
disabled. Specifically, allow for CXL devices outside of those claiming
to be compliant with the generic CXL memory device class code, like
vendor specific Type-2/3 devices that host CXL.mem. This implies, allow
for the creation of memdevs that only support component-registers, not
necessarily memory-device-registers (like mailbox registers). A memdev
derived from a CXL endpoint that does not support generic class code
expectations is tagged "CXL_DEVTYPE_DEVMEM", while a memdev derived from a
class-code compliant endpoint is tagged "CXL_DEVTYPE_CLASSMEM".

The primary assumption of a CXL_DEVTYPE_DEVMEM memdev is that it
optionally may not host a mailbox. Disable the command passthrough ioctl
for memdevs that are not CXL_DEVTYPE_CLASSMEM, and return empty strings
from memdev attributes associated with data retrieved via the
class-device-standard IDENTIFY command. Note that empty strings were
chosen over attribute visibility to maintain compatibility with shipping
versions of cxl-cli that expect those attributes to always be present.
Once cxl-cli has dropped that requirement this workaround can be
deprecated.

Signed-off-by: Dan Williams <dan.j.williams@intel.com>
---
 drivers/cxl/core/mbox.c   |    1 +
 drivers/cxl/core/memdev.c |   10 +++++++++-
 drivers/cxl/cxlmem.h      |   18 ++++++++++++++++++
 3 files changed, 28 insertions(+), 1 deletion(-)

diff --git a/drivers/cxl/core/mbox.c b/drivers/cxl/core/mbox.c
index ab9d455e8579..1990a5940b7c 100644
--- a/drivers/cxl/core/mbox.c
+++ b/drivers/cxl/core/mbox.c
@@ -1272,6 +1272,7 @@ struct cxl_memdev_state *cxl_memdev_state_create(struct device *dev)
 	mutex_init(&mds->mbox_mutex);
 	mutex_init(&mds->event.log_lock);
 	mds->cxlds.dev = dev;
+	mds->cxlds.type = CXL_DEVTYPE_CLASSMEM;
 
 	return mds;
 }
diff --git a/drivers/cxl/core/memdev.c b/drivers/cxl/core/memdev.c
index 15434b1b4909..3f2d54f30548 100644
--- a/drivers/cxl/core/memdev.c
+++ b/drivers/cxl/core/memdev.c
@@ -41,6 +41,8 @@ static ssize_t firmware_version_show(struct device *dev,
 	struct cxl_dev_state *cxlds = cxlmd->cxlds;
 	struct cxl_memdev_state *mds = to_cxl_memdev_state(cxlds);
 
+	if (!mds)
+		return sysfs_emit(buf, "\n");
 	return sysfs_emit(buf, "%.16s\n", mds->firmware_version);
 }
 static DEVICE_ATTR_RO(firmware_version);
@@ -52,6 +54,8 @@ static ssize_t payload_max_show(struct device *dev,
 	struct cxl_dev_state *cxlds = cxlmd->cxlds;
 	struct cxl_memdev_state *mds = to_cxl_memdev_state(cxlds);
 
+	if (!mds)
+		return sysfs_emit(buf, "\n");
 	return sysfs_emit(buf, "%zu\n", mds->payload_size);
 }
 static DEVICE_ATTR_RO(payload_max);
@@ -63,6 +67,8 @@ static ssize_t label_storage_size_show(struct device *dev,
 	struct cxl_dev_state *cxlds = cxlmd->cxlds;
 	struct cxl_memdev_state *mds = to_cxl_memdev_state(cxlds);
 
+	if (!mds)
+		return sysfs_emit(buf, "\n");
 	return sysfs_emit(buf, "%zu\n", mds->lsa_size);
 }
 static DEVICE_ATTR_RO(label_storage_size);
@@ -517,10 +523,12 @@ static long cxl_memdev_ioctl(struct file *file, unsigned int cmd,
 			     unsigned long arg)
 {
 	struct cxl_memdev *cxlmd = file->private_data;
+	struct cxl_dev_state *cxlds;
 	int rc = -ENXIO;
 
 	down_read(&cxl_memdev_rwsem);
-	if (cxlmd->cxlds)
+	cxlds = cxlmd->cxlds;
+	if (cxlds && cxlds->type == CXL_DEVTYPE_CLASSMEM)
 		rc = __cxl_memdev_ioctl(cxlmd, cmd, arg);
 	up_read(&cxl_memdev_rwsem);
 
diff --git a/drivers/cxl/cxlmem.h b/drivers/cxl/cxlmem.h
index b1a72e01e4de..1b39afeb369e 100644
--- a/drivers/cxl/cxlmem.h
+++ b/drivers/cxl/cxlmem.h
@@ -254,6 +254,20 @@ struct cxl_poison_state {
 	struct mutex lock;  /* Protect reads of poison list */
 };
 
+/*
+ * enum cxl_devtype - delineate type-2 from a generic type-3 device
+ * @CXL_DEVTYPE_DEVMEM - Vendor specific CXL Type-2 device implementing HDM-D or
+ *			 HDM-DB, no requirement that this device implements a
+ *			 mailbox, or other memory-device-standard manageability
+ *			 flows.
+ * @CXL_DEVTYPE_CLASSMEM - Common class definition of a CXL Type-3 device with
+ *			   HDM-H and class-mandatory memory device registers
+ */
+enum cxl_devtype {
+	CXL_DEVTYPE_DEVMEM,
+	CXL_DEVTYPE_CLASSMEM,
+};
+
 /**
  * struct cxl_dev_state - The driver device state
  *
@@ -272,6 +286,7 @@ struct cxl_poison_state {
  * @ram_res: Active Volatile memory capacity configuration
  * @component_reg_phys: register base of component registers
  * @serial: PCIe Device Serial Number
+ * @type: Generic Memory Class device or Vendor Specific Memory device
  */
 struct cxl_dev_state {
 	struct device *dev;
@@ -285,6 +300,7 @@ struct cxl_dev_state {
 	struct resource ram_res;
 	resource_size_t component_reg_phys;
 	u64 serial;
+	enum cxl_devtype type;
 };
 
 /**
@@ -343,6 +359,8 @@ struct cxl_memdev_state {
 static inline struct cxl_memdev_state *
 to_cxl_memdev_state(struct cxl_dev_state *cxlds)
 {
+	if (cxlds->type != CXL_DEVTYPE_CLASSMEM)
+		return NULL;
 	return container_of(cxlds, struct cxl_memdev_state, cxlds);
 }
 


  parent reply	other threads:[~2023-06-15  1:30 UTC|newest]

Thread overview: 27+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-06-15  1:29 [PATCH v2 00/12] Device memory prep Dan Williams
2023-06-15  1:29 ` [PATCH v2 01/12] cxl/regs: Clarify when a 'struct cxl_register_map' is input vs output Dan Williams
2023-06-15  1:29 ` [PATCH v2 02/12] tools/testing/cxl: Remove unused @cxlds argument Dan Williams
2023-06-15  1:29 ` [PATCH v2 03/12] cxl: Fix kernel-doc warnings Dan Williams
2023-06-15 21:28   ` Dave Jiang
2023-06-22 13:50   ` Jonathan Cameron
2023-06-15  1:29 ` [PATCH v2 04/12] cxl: Remove leftover attribute documentation in 'struct cxl_dev_state' Dan Williams
2023-06-15 21:29   ` Dave Jiang
2023-06-22 13:50     ` Jonathan Cameron
2023-06-15  1:30 ` [PATCH v2 05/12] cxl/mbox: Move mailbox related driver state to its own data structure Dan Williams
2023-06-15  1:30 ` Dan Williams [this message]
2023-06-15 21:30   ` [PATCH v2 06/12] cxl/memdev: Make mailbox functionality optional Dave Jiang
2023-06-22 13:52     ` Jonathan Cameron
2023-06-15  1:30 ` [PATCH v2 07/12] cxl/port: Rename CXL_DECODER_{EXPANDER, ACCELERATOR} => {HOSTONLYMEM, DEVMEM} Dan Williams
2023-06-15 21:31   ` Dave Jiang
2023-06-15  1:30 ` [PATCH v2 08/12] cxl/hdm: Default CXL_DEVTYPE_DEVMEM decoders to CXL_DECODER_DEVMEM Dan Williams
2023-06-15 21:32   ` Dave Jiang
2023-06-15  1:30 ` [PATCH v2 09/12] cxl/region: Manage decoder target_type at decoder-attach time Dan Williams
2023-06-15  1:30 ` [PATCH v2 10/12] cxl/pci: Unconditionally unmask 256B Flit errors Dan Williams
2023-06-15 21:34   ` Dave Jiang
2023-06-22 13:55     ` Jonathan Cameron
2023-06-15  1:30 ` [PATCH v2 11/12] cxl/port: Enumerate cxl link capabilities Dan Williams
2023-06-15 21:37   ` Dave Jiang
2023-06-16  0:07   ` Dan Williams
2023-06-16 19:16     ` Dan Williams
2023-06-22 14:04       ` Jonathan Cameron
2023-06-15  1:30 ` [PATCH v2 12/12] cxl/memdev: Formalize endpoint port linkage Dan Williams

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=168679260782.3436160.7587293613945445365.stgit@dwillia2-xfh.jf.intel.com \
    --to=dan.j.williams@intel.com \
    --cc=linux-cxl@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.