From: Shengjiu Wang <shengjiu.wang@nxp.com> To: lgirdwood@gmail.com, broonie@kernel.org, robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org, conor+dt@kernel.org, shengjiu.wang@gmail.com, linux-sound@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, shawnguo@kernel.org, s.hauer@pengutronix.de, kernel@pengutronix.de, festevam@gmail.com, imx@lists.linux.dev, linux-arm-kernel@lists.infradead.org Subject: [PATCH] ASoC: dt-bindings: imx-audio-spdif: convert to YAML Date: Mon, 8 Apr 2024 12:55:42 +0800 [thread overview] Message-ID: <1712552142-27055-1-git-send-email-shengjiu.wang@nxp.com> (raw) Convert the imx-audio-spdif binding to YAML. When testing dtbs_check, found below compatible strings are not listed in document: fsl,imx-sabreauto-spdif fsl,imx6sx-sdb-spdif So add them in yaml file to pass the test. Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> --- .../bindings/sound/imx-audio-spdif.txt | 36 ----------- .../bindings/sound/imx-audio-spdif.yaml | 62 +++++++++++++++++++ 2 files changed, 62 insertions(+), 36 deletions(-) delete mode 100644 Documentation/devicetree/bindings/sound/imx-audio-spdif.txt create mode 100644 Documentation/devicetree/bindings/sound/imx-audio-spdif.yaml diff --git a/Documentation/devicetree/bindings/sound/imx-audio-spdif.txt b/Documentation/devicetree/bindings/sound/imx-audio-spdif.txt deleted file mode 100644 index da84a442ccea..000000000000 --- a/Documentation/devicetree/bindings/sound/imx-audio-spdif.txt +++ /dev/null @@ -1,36 +0,0 @@ -Freescale i.MX audio complex with S/PDIF transceiver - -Required properties: - - - compatible : "fsl,imx-audio-spdif" - - - model : The user-visible name of this sound complex - - - spdif-controller : The phandle of the i.MX S/PDIF controller - - -Optional properties: - - - spdif-out : This is a boolean property. If present, the - transmitting function of S/PDIF will be enabled, - indicating there's a physical S/PDIF out connector - or jack on the board or it's connecting to some - other IP block, such as an HDMI encoder or - display-controller. - - - spdif-in : This is a boolean property. If present, the receiving - function of S/PDIF will be enabled, indicating there - is a physical S/PDIF in connector/jack on the board. - -* Note: At least one of these two properties should be set in the DT binding. - - -Example: - -sound-spdif { - compatible = "fsl,imx-audio-spdif"; - model = "imx-spdif"; - spdif-controller = <&spdif>; - spdif-out; - spdif-in; -}; diff --git a/Documentation/devicetree/bindings/sound/imx-audio-spdif.yaml b/Documentation/devicetree/bindings/sound/imx-audio-spdif.yaml new file mode 100644 index 000000000000..b29e024f553f --- /dev/null +++ b/Documentation/devicetree/bindings/sound/imx-audio-spdif.yaml @@ -0,0 +1,62 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/imx-audio-spdif.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale i.MX audio complex with S/PDIF transceiver + +maintainers: + - Shengjiu Wang <shengjiu.wang@nxp.com> + +properties: + compatible: + oneOf: + - items: + - enum: + - fsl,imx-audio-spdif + - enum: + - fsl,imx-sabreauto-spdif + - fsl,imx6sx-sdb-spdif + - items: + - enum: + - fsl,imx-audio-spdif + + model: + $ref: /schemas/types.yaml#/definitions/string + description: User specified audio sound card name + + spdif-controller: + $ref: /schemas/types.yaml#/definitions/phandle + description: The phandle of the i.MX S/PDIF controller + + spdif-out: + type: boolean + description: | + If present, the transmitting function of S/PDIF will be enabled, + indicating there's a physical S/PDIF out connector or jack on the + board or it's connecting to some other IP block, such as an HDMI + encoder or display-controller. + + spdif-in: + type: boolean + description: | + If present, the receiving function of S/PDIF will be enabled, + indicating there is a physical S/PDIF in connector/jack on the board. + +required: + - compatible + - model + - spdif-controller + +additionalProperties: false + +examples: + - | + sound-spdif { + compatible = "fsl,imx-audio-spdif"; + model = "imx-spdif"; + spdif-controller = <&spdif>; + spdif-out; + spdif-in; + }; -- 2.34.1
WARNING: multiple messages have this Message-ID (diff)
From: Shengjiu Wang <shengjiu.wang@nxp.com> To: lgirdwood@gmail.com, broonie@kernel.org, robh+dt@kernel.org, krzysztof.kozlowski+dt@linaro.org, conor+dt@kernel.org, shengjiu.wang@gmail.com, linux-sound@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, shawnguo@kernel.org, s.hauer@pengutronix.de, kernel@pengutronix.de, festevam@gmail.com, imx@lists.linux.dev, linux-arm-kernel@lists.infradead.org Subject: [PATCH] ASoC: dt-bindings: imx-audio-spdif: convert to YAML Date: Mon, 8 Apr 2024 12:55:42 +0800 [thread overview] Message-ID: <1712552142-27055-1-git-send-email-shengjiu.wang@nxp.com> (raw) Convert the imx-audio-spdif binding to YAML. When testing dtbs_check, found below compatible strings are not listed in document: fsl,imx-sabreauto-spdif fsl,imx6sx-sdb-spdif So add them in yaml file to pass the test. Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com> --- .../bindings/sound/imx-audio-spdif.txt | 36 ----------- .../bindings/sound/imx-audio-spdif.yaml | 62 +++++++++++++++++++ 2 files changed, 62 insertions(+), 36 deletions(-) delete mode 100644 Documentation/devicetree/bindings/sound/imx-audio-spdif.txt create mode 100644 Documentation/devicetree/bindings/sound/imx-audio-spdif.yaml diff --git a/Documentation/devicetree/bindings/sound/imx-audio-spdif.txt b/Documentation/devicetree/bindings/sound/imx-audio-spdif.txt deleted file mode 100644 index da84a442ccea..000000000000 --- a/Documentation/devicetree/bindings/sound/imx-audio-spdif.txt +++ /dev/null @@ -1,36 +0,0 @@ -Freescale i.MX audio complex with S/PDIF transceiver - -Required properties: - - - compatible : "fsl,imx-audio-spdif" - - - model : The user-visible name of this sound complex - - - spdif-controller : The phandle of the i.MX S/PDIF controller - - -Optional properties: - - - spdif-out : This is a boolean property. If present, the - transmitting function of S/PDIF will be enabled, - indicating there's a physical S/PDIF out connector - or jack on the board or it's connecting to some - other IP block, such as an HDMI encoder or - display-controller. - - - spdif-in : This is a boolean property. If present, the receiving - function of S/PDIF will be enabled, indicating there - is a physical S/PDIF in connector/jack on the board. - -* Note: At least one of these two properties should be set in the DT binding. - - -Example: - -sound-spdif { - compatible = "fsl,imx-audio-spdif"; - model = "imx-spdif"; - spdif-controller = <&spdif>; - spdif-out; - spdif-in; -}; diff --git a/Documentation/devicetree/bindings/sound/imx-audio-spdif.yaml b/Documentation/devicetree/bindings/sound/imx-audio-spdif.yaml new file mode 100644 index 000000000000..b29e024f553f --- /dev/null +++ b/Documentation/devicetree/bindings/sound/imx-audio-spdif.yaml @@ -0,0 +1,62 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/imx-audio-spdif.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale i.MX audio complex with S/PDIF transceiver + +maintainers: + - Shengjiu Wang <shengjiu.wang@nxp.com> + +properties: + compatible: + oneOf: + - items: + - enum: + - fsl,imx-audio-spdif + - enum: + - fsl,imx-sabreauto-spdif + - fsl,imx6sx-sdb-spdif + - items: + - enum: + - fsl,imx-audio-spdif + + model: + $ref: /schemas/types.yaml#/definitions/string + description: User specified audio sound card name + + spdif-controller: + $ref: /schemas/types.yaml#/definitions/phandle + description: The phandle of the i.MX S/PDIF controller + + spdif-out: + type: boolean + description: | + If present, the transmitting function of S/PDIF will be enabled, + indicating there's a physical S/PDIF out connector or jack on the + board or it's connecting to some other IP block, such as an HDMI + encoder or display-controller. + + spdif-in: + type: boolean + description: | + If present, the receiving function of S/PDIF will be enabled, + indicating there is a physical S/PDIF in connector/jack on the board. + +required: + - compatible + - model + - spdif-controller + +additionalProperties: false + +examples: + - | + sound-spdif { + compatible = "fsl,imx-audio-spdif"; + model = "imx-spdif"; + spdif-controller = <&spdif>; + spdif-out; + spdif-in; + }; -- 2.34.1 _______________________________________________ linux-arm-kernel mailing list linux-arm-kernel@lists.infradead.org http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next reply other threads:[~2024-04-08 5:14 UTC|newest] Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top 2024-04-08 4:55 Shengjiu Wang [this message] 2024-04-08 4:55 ` [PATCH] ASoC: dt-bindings: imx-audio-spdif: convert to YAML Shengjiu Wang 2024-04-08 5:48 ` Krzysztof Kozlowski 2024-04-08 5:48 ` Krzysztof Kozlowski
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=1712552142-27055-1-git-send-email-shengjiu.wang@nxp.com \ --to=shengjiu.wang@nxp.com \ --cc=broonie@kernel.org \ --cc=conor+dt@kernel.org \ --cc=devicetree@vger.kernel.org \ --cc=festevam@gmail.com \ --cc=imx@lists.linux.dev \ --cc=kernel@pengutronix.de \ --cc=krzysztof.kozlowski+dt@linaro.org \ --cc=lgirdwood@gmail.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-sound@vger.kernel.org \ --cc=robh+dt@kernel.org \ --cc=s.hauer@pengutronix.de \ --cc=shawnguo@kernel.org \ --cc=shengjiu.wang@gmail.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.