All of lore.kernel.org
 help / color / mirror / Atom feed
From: Simon Horman <horms+renesas@verge.net.au>
To: linux-renesas-soc@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org,
	Magnus Damm <magnus.damm@gmail.com>,
	Biju Das <biju.das@bp.renesas.com>,
	Simon Horman <horms+renesas@verge.net.au>
Subject: [PATCH 30/37] ARM: dts: r8a7745: Add sound support
Date: Fri, 22 Dec 2017 11:30:08 +0100	[thread overview]
Message-ID: <17d2e479d09e597c9915f0ab853edfa8f5010476.1513938145.git.horms+renesas@verge.net.au> (raw)
In-Reply-To: <cover.1513938145.git.horms+renesas@verge.net.au>

From: Biju Das <biju.das@bp.renesas.com>

Define the generic r8a7745(RZ/G1E) part of the sound device node.

This patch is based on the r8a7794 sound work by Sergei Shtylyov.

Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7745.dtsi | 180 +++++++++++++++++++++++++++++++++++++++++
 1 file changed, 180 insertions(+)

diff --git a/arch/arm/boot/dts/r8a7745.dtsi b/arch/arm/boot/dts/r8a7745.dtsi
index d9488a116236..835a2821477b 100644
--- a/arch/arm/boot/dts/r8a7745.dtsi
+++ b/arch/arm/boot/dts/r8a7745.dtsi
@@ -1293,6 +1293,186 @@
 			resets = <&cpg 915>;
 			status = "disabled";
 		};
+
+		rcar_sound: sound@ec500000 {
+			/*
+			 * #sound-dai-cells is required
+			 *
+			 * Single DAI : #sound-dai-cells = <0>; <&rcar_sound>;
+			 * Multi  DAI : #sound-dai-cells = <1>; <&rcar_sound N>;
+			 */
+			compatible = "renesas,rcar_sound-r8a7745",
+				     "renesas,rcar_sound-gen2";
+			reg = <0 0xec500000 0 0x1000>, /* SCU */
+			      <0 0xec5a0000 0 0x100>,  /* ADG */
+			      <0 0xec540000 0 0x1000>, /* SSIU */
+			      <0 0xec541000 0 0x280>,  /* SSI */
+			      <0 0xec740000 0 0x200>;  /* Audio DMAC peri peri */
+			reg-names = "scu", "adg", "ssiu", "ssi", "audmapp";
+
+			clocks = <&cpg CPG_MOD 1005>,
+				 <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
+				 <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
+				 <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
+				 <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
+				 <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
+				 <&cpg CPG_MOD 1025>, <&cpg CPG_MOD 1026>,
+				 <&cpg CPG_MOD 1027>, <&cpg CPG_MOD 1028>,
+				 <&cpg CPG_MOD 1029>, <&cpg CPG_MOD 1030>,
+				 <&cpg CPG_MOD 1021>, <&cpg CPG_MOD 1020>,
+				 <&cpg CPG_MOD 1021>, <&cpg CPG_MOD 1020>,
+				 <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
+				 <&audio_clka>, <&audio_clkb>, <&audio_clkc>,
+				 <&cpg CPG_CORE R8A7745_CLK_M2>;
+			clock-names = "ssi-all",
+				      "ssi.9", "ssi.8", "ssi.7", "ssi.6",
+				      "ssi.5", "ssi.4", "ssi.3", "ssi.2",
+				      "ssi.1", "ssi.0",
+				      "src.6", "src.5", "src.4", "src.3",
+				      "src.2", "src.1",
+				      "ctu.0", "ctu.1",
+				      "mix.0", "mix.1",
+				      "dvc.0", "dvc.1",
+				      "clk_a", "clk_b", "clk_c", "clk_i";
+			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			resets = <&cpg 1005>,
+				 <&cpg 1006>, <&cpg 1007>, <&cpg 1008>,
+				 <&cpg 1009>, <&cpg 1010>, <&cpg 1011>,
+				 <&cpg 1012>, <&cpg 1013>, <&cpg 1014>,
+				 <&cpg 1015>;
+			reset-names = "ssi-all",
+				      "ssi.9", "ssi.8", "ssi.7", "ssi.6",
+				      "ssi.5", "ssi.4", "ssi.3", "ssi.2",
+				      "ssi.1", "ssi.0";
+
+			status = "disabled";
+
+			rcar_sound,dvc {
+				dvc0: dvc-0 {
+					dmas = <&audma0 0xbc>;
+					dma-names = "tx";
+				};
+				dvc1: dvc-1 {
+					dmas = <&audma0 0xbe>;
+					dma-names = "tx";
+				};
+			};
+
+			rcar_sound,mix {
+				mix0: mix-0 { };
+				mix1: mix-1 { };
+			};
+
+			rcar_sound,ctu {
+				ctu00: ctu-0 { };
+				ctu01: ctu-1 { };
+				ctu02: ctu-2 { };
+				ctu03: ctu-3 { };
+				ctu10: ctu-4 { };
+				ctu11: ctu-5 { };
+				ctu12: ctu-6 { };
+				ctu13: ctu-7 { };
+			};
+
+			rcar_sound,src {
+				src-0 {
+					status = "disabled";
+				};
+				src1: src-1 {
+					interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x87>, <&audma0 0x9c>;
+					dma-names = "rx", "tx";
+				};
+				src2: src-2 {
+					interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x89>, <&audma0 0x9e>;
+					dma-names = "rx", "tx";
+				};
+				src3: src-3 {
+					interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x8b>, <&audma0 0xa0>;
+					dma-names = "rx", "tx";
+				};
+				src4: src-4 {
+					interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x8d>, <&audma0 0xb0>;
+					dma-names = "rx", "tx";
+				};
+				src5: src-5 {
+					interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x8f>, <&audma0 0xb2>;
+					dma-names = "rx", "tx";
+				};
+				src6: src-6 {
+					interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x91>, <&audma0 0xb4>;
+					dma-names = "rx", "tx";
+				};
+			};
+
+			rcar_sound,ssi {
+				ssi0: ssi-0 {
+					interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x01>, <&audma0 0x02>,
+					       <&audma0 0x15>, <&audma0 0x16>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi1: ssi-1 {
+					interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x03>, <&audma0 0x04>,
+					       <&audma0 0x49>, <&audma0 0x4a>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi2: ssi-2 {
+					interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x05>, <&audma0 0x06>,
+					       <&audma0 0x63>, <&audma0 0x64>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi3: ssi-3 {
+					interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x07>, <&audma0 0x08>,
+					       <&audma0 0x6f>, <&audma0 0x70>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi4: ssi-4 {
+					interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x09>, <&audma0 0x0a>,
+					       <&audma0 0x71>, <&audma0 0x72>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi5: ssi-5 {
+					interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x0b>, <&audma0 0x0c>,
+					       <&audma0 0x73>, <&audma0 0x74>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi6: ssi-6 {
+					interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x0d>, <&audma0 0x0e>,
+					       <&audma0 0x75>, <&audma0 0x76>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi7: ssi-7 {
+					interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x0f>, <&audma0 0x10>,
+					       <&audma0 0x79>, <&audma0 0x7a>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi8: ssi-8 {
+					interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x11>, <&audma0 0x12>,
+					       <&audma0 0x7b>, <&audma0 0x7c>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi9: ssi-9 {
+					interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x13>, <&audma0 0x14>,
+					       <&audma0 0x7d>, <&audma0 0x7e>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+			};
+		};
 	};
 
 	timer {
-- 
2.11.0

WARNING: multiple messages have this Message-ID (diff)
From: horms+renesas@verge.net.au (Simon Horman)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 30/37] ARM: dts: r8a7745: Add sound support
Date: Fri, 22 Dec 2017 11:30:08 +0100	[thread overview]
Message-ID: <17d2e479d09e597c9915f0ab853edfa8f5010476.1513938145.git.horms+renesas@verge.net.au> (raw)
In-Reply-To: <cover.1513938145.git.horms+renesas@verge.net.au>

From: Biju Das <biju.das@bp.renesas.com>

Define the generic r8a7745(RZ/G1E) part of the sound device node.

This patch is based on the r8a7794 sound work by Sergei Shtylyov.

Signed-off-by: Biju Das <biju.das@bp.renesas.com>
Reviewed-by: Fabrizio Castro <fabrizio.castro@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
---
 arch/arm/boot/dts/r8a7745.dtsi | 180 +++++++++++++++++++++++++++++++++++++++++
 1 file changed, 180 insertions(+)

diff --git a/arch/arm/boot/dts/r8a7745.dtsi b/arch/arm/boot/dts/r8a7745.dtsi
index d9488a116236..835a2821477b 100644
--- a/arch/arm/boot/dts/r8a7745.dtsi
+++ b/arch/arm/boot/dts/r8a7745.dtsi
@@ -1293,6 +1293,186 @@
 			resets = <&cpg 915>;
 			status = "disabled";
 		};
+
+		rcar_sound: sound at ec500000 {
+			/*
+			 * #sound-dai-cells is required
+			 *
+			 * Single DAI : #sound-dai-cells = <0>; <&rcar_sound>;
+			 * Multi  DAI : #sound-dai-cells = <1>; <&rcar_sound N>;
+			 */
+			compatible = "renesas,rcar_sound-r8a7745",
+				     "renesas,rcar_sound-gen2";
+			reg = <0 0xec500000 0 0x1000>, /* SCU */
+			      <0 0xec5a0000 0 0x100>,  /* ADG */
+			      <0 0xec540000 0 0x1000>, /* SSIU */
+			      <0 0xec541000 0 0x280>,  /* SSI */
+			      <0 0xec740000 0 0x200>;  /* Audio DMAC peri peri */
+			reg-names = "scu", "adg", "ssiu", "ssi", "audmapp";
+
+			clocks = <&cpg CPG_MOD 1005>,
+				 <&cpg CPG_MOD 1006>, <&cpg CPG_MOD 1007>,
+				 <&cpg CPG_MOD 1008>, <&cpg CPG_MOD 1009>,
+				 <&cpg CPG_MOD 1010>, <&cpg CPG_MOD 1011>,
+				 <&cpg CPG_MOD 1012>, <&cpg CPG_MOD 1013>,
+				 <&cpg CPG_MOD 1014>, <&cpg CPG_MOD 1015>,
+				 <&cpg CPG_MOD 1025>, <&cpg CPG_MOD 1026>,
+				 <&cpg CPG_MOD 1027>, <&cpg CPG_MOD 1028>,
+				 <&cpg CPG_MOD 1029>, <&cpg CPG_MOD 1030>,
+				 <&cpg CPG_MOD 1021>, <&cpg CPG_MOD 1020>,
+				 <&cpg CPG_MOD 1021>, <&cpg CPG_MOD 1020>,
+				 <&cpg CPG_MOD 1019>, <&cpg CPG_MOD 1018>,
+				 <&audio_clka>, <&audio_clkb>, <&audio_clkc>,
+				 <&cpg CPG_CORE R8A7745_CLK_M2>;
+			clock-names = "ssi-all",
+				      "ssi.9", "ssi.8", "ssi.7", "ssi.6",
+				      "ssi.5", "ssi.4", "ssi.3", "ssi.2",
+				      "ssi.1", "ssi.0",
+				      "src.6", "src.5", "src.4", "src.3",
+				      "src.2", "src.1",
+				      "ctu.0", "ctu.1",
+				      "mix.0", "mix.1",
+				      "dvc.0", "dvc.1",
+				      "clk_a", "clk_b", "clk_c", "clk_i";
+			power-domains = <&sysc R8A7745_PD_ALWAYS_ON>;
+			resets = <&cpg 1005>,
+				 <&cpg 1006>, <&cpg 1007>, <&cpg 1008>,
+				 <&cpg 1009>, <&cpg 1010>, <&cpg 1011>,
+				 <&cpg 1012>, <&cpg 1013>, <&cpg 1014>,
+				 <&cpg 1015>;
+			reset-names = "ssi-all",
+				      "ssi.9", "ssi.8", "ssi.7", "ssi.6",
+				      "ssi.5", "ssi.4", "ssi.3", "ssi.2",
+				      "ssi.1", "ssi.0";
+
+			status = "disabled";
+
+			rcar_sound,dvc {
+				dvc0: dvc-0 {
+					dmas = <&audma0 0xbc>;
+					dma-names = "tx";
+				};
+				dvc1: dvc-1 {
+					dmas = <&audma0 0xbe>;
+					dma-names = "tx";
+				};
+			};
+
+			rcar_sound,mix {
+				mix0: mix-0 { };
+				mix1: mix-1 { };
+			};
+
+			rcar_sound,ctu {
+				ctu00: ctu-0 { };
+				ctu01: ctu-1 { };
+				ctu02: ctu-2 { };
+				ctu03: ctu-3 { };
+				ctu10: ctu-4 { };
+				ctu11: ctu-5 { };
+				ctu12: ctu-6 { };
+				ctu13: ctu-7 { };
+			};
+
+			rcar_sound,src {
+				src-0 {
+					status = "disabled";
+				};
+				src1: src-1 {
+					interrupts = <GIC_SPI 353 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x87>, <&audma0 0x9c>;
+					dma-names = "rx", "tx";
+				};
+				src2: src-2 {
+					interrupts = <GIC_SPI 354 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x89>, <&audma0 0x9e>;
+					dma-names = "rx", "tx";
+				};
+				src3: src-3 {
+					interrupts = <GIC_SPI 355 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x8b>, <&audma0 0xa0>;
+					dma-names = "rx", "tx";
+				};
+				src4: src-4 {
+					interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x8d>, <&audma0 0xb0>;
+					dma-names = "rx", "tx";
+				};
+				src5: src-5 {
+					interrupts = <GIC_SPI 357 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x8f>, <&audma0 0xb2>;
+					dma-names = "rx", "tx";
+				};
+				src6: src-6 {
+					interrupts = <GIC_SPI 358 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x91>, <&audma0 0xb4>;
+					dma-names = "rx", "tx";
+				};
+			};
+
+			rcar_sound,ssi {
+				ssi0: ssi-0 {
+					interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x01>, <&audma0 0x02>,
+					       <&audma0 0x15>, <&audma0 0x16>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi1: ssi-1 {
+					interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x03>, <&audma0 0x04>,
+					       <&audma0 0x49>, <&audma0 0x4a>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi2: ssi-2 {
+					interrupts = <GIC_SPI 372 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x05>, <&audma0 0x06>,
+					       <&audma0 0x63>, <&audma0 0x64>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi3: ssi-3 {
+					interrupts = <GIC_SPI 373 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x07>, <&audma0 0x08>,
+					       <&audma0 0x6f>, <&audma0 0x70>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi4: ssi-4 {
+					interrupts = <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x09>, <&audma0 0x0a>,
+					       <&audma0 0x71>, <&audma0 0x72>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi5: ssi-5 {
+					interrupts = <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x0b>, <&audma0 0x0c>,
+					       <&audma0 0x73>, <&audma0 0x74>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi6: ssi-6 {
+					interrupts = <GIC_SPI 376 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x0d>, <&audma0 0x0e>,
+					       <&audma0 0x75>, <&audma0 0x76>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi7: ssi-7 {
+					interrupts = <GIC_SPI 377 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x0f>, <&audma0 0x10>,
+					       <&audma0 0x79>, <&audma0 0x7a>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi8: ssi-8 {
+					interrupts = <GIC_SPI 378 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x11>, <&audma0 0x12>,
+					       <&audma0 0x7b>, <&audma0 0x7c>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+				ssi9: ssi-9 {
+					interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>;
+					dmas = <&audma0 0x13>, <&audma0 0x14>,
+					       <&audma0 0x7d>, <&audma0 0x7e>;
+					dma-names = "rx", "tx", "rxu", "txu";
+				};
+			};
+		};
 	};
 
 	timer {
-- 
2.11.0

  parent reply	other threads:[~2017-12-22 10:31 UTC|newest]

Thread overview: 78+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-12-22 10:30 [GIT PULL] Second Round of Renesas ARM Based SoC DT Updates for v4.16 Simon Horman
2017-12-22 10:30 ` Simon Horman
2017-12-22 10:29 ` [PATCH 01/37] ARM: dts: r8a7745: Add APMU node and second CPU core Simon Horman
2017-12-22 10:29   ` Simon Horman
2017-12-22 10:29 ` [PATCH 02/37] ARM: dts: r8a7743: Add audio clocks Simon Horman
2017-12-22 10:29   ` Simon Horman
2017-12-22 10:29 ` [PATCH 03/37] ARM: dts: r8a7743: Add audio DMAC support Simon Horman
2017-12-22 10:29   ` Simon Horman
2017-12-22 10:29 ` [PATCH 04/37] ARM: dts: r8a7743: Add sound support Simon Horman
2017-12-22 10:29   ` Simon Horman
2017-12-22 10:29 ` [PATCH 05/37] ARM: dts: r8a7790: Correct critical CPU temperature Simon Horman
2017-12-22 10:29   ` Simon Horman
2017-12-22 10:29 ` [PATCH 06/37] ARM: dts: r8a7791: " Simon Horman
2017-12-22 10:29   ` Simon Horman
2017-12-22 10:29 ` [PATCH 07/37] ARM: dts: r8a7793: " Simon Horman
2017-12-22 10:29   ` Simon Horman
2017-12-22 10:29 ` [PATCH 08/37] ARM: dts: r8a7743: Add PWM SoC support Simon Horman
2017-12-22 10:29   ` Simon Horman
2017-12-22 10:29 ` [PATCH 09/37] ARM: dts: r8a7743: Add TPU support Simon Horman
2017-12-22 10:29   ` Simon Horman
2017-12-22 10:29 ` [PATCH 10/37] ARM: dts: r8a7743: Add thermal device to DT Simon Horman
2017-12-22 10:29   ` Simon Horman
2017-12-22 10:29 ` [PATCH 11/37] ARM: dts: r8a7745: Add PWM SoC support Simon Horman
2017-12-22 10:29   ` Simon Horman
2017-12-22 10:29 ` [PATCH 12/37] ARM: dts: r8a7745: Add TPU support Simon Horman
2017-12-22 10:29   ` Simon Horman
2017-12-22 10:29 ` [PATCH 13/37] ARM: dts: r8a7743: Add CMT SoC specific support Simon Horman
2017-12-22 10:29   ` Simon Horman
2017-12-22 10:29 ` [PATCH 14/37] ARM: dts: r8a7745: " Simon Horman
2017-12-22 10:29   ` Simon Horman
2017-12-22 10:29 ` [PATCH 15/37] ARM: dts: r8a7745: sort root sub-nodes alphabetically Simon Horman
2017-12-22 10:29   ` Simon Horman
2017-12-22 10:29 ` [PATCH 16/37] ARM: dts: r8a7745: move timer node out of bus Simon Horman
2017-12-22 10:29   ` Simon Horman
2017-12-22 10:29 ` [PATCH 17/37] ARM: dts: r8a7792: sort root sub-nodes alphabetically Simon Horman
2017-12-22 10:29   ` Simon Horman
2017-12-22 10:29 ` [PATCH 18/37] ARM: dts: r8a7792: move timer node out of bus Simon Horman
2017-12-22 10:29   ` Simon Horman
2017-12-22 10:29 ` [PATCH 19/37] ARM: dts: iwg20d-q7-common: Enable SGTL5000 audio codec Simon Horman
2017-12-22 10:29   ` Simon Horman
2017-12-22 10:29 ` [PATCH 20/37] ARM: dts: iwg20d-q7-common: Sound PIO support Simon Horman
2017-12-22 10:29   ` Simon Horman
2017-12-22 10:29 ` [PATCH 21/37] ARM: dts: iwg20d-q7-common: Sound DMA support on DTS Simon Horman
2017-12-22 10:29   ` Simon Horman
2017-12-22 10:30 ` [PATCH 22/37] ARM: dts: iwg20d-q7-common: Sound DMA support via BUSIF " Simon Horman
2017-12-22 10:30   ` Simon Horman
2017-12-22 10:30 ` [PATCH 23/37] ARM: dts: iwg20d-q7-common: Sound DMA support via SRC " Simon Horman
2017-12-22 10:30   ` Simon Horman
2017-12-22 10:30 ` [PATCH 24/37] ARM: dts: iwg20d-q7-common: Sound DMA support via DVC " Simon Horman
2017-12-22 10:30   ` Simon Horman
2017-12-22 10:30 ` [PATCH 25/37] ARM: dts: r8a7743: sort root sub-nodes alphabetically Simon Horman
2017-12-22 10:30   ` Simon Horman
2017-12-22 10:30 ` [PATCH 26/37] ARM: dts: r8a7743: move timer and thermal-zones nodes out of bus Simon Horman
2017-12-22 10:30   ` Simon Horman
2017-12-22 10:30 ` [PATCH 27/37] ARM: dts: r8a7740: Correct TPU register block size Simon Horman
2017-12-22 10:30   ` Simon Horman
2017-12-22 10:30 ` [PATCH 28/37] ARM: dts: r8a7745: Add audio clocks Simon Horman
2017-12-22 10:30   ` Simon Horman
2017-12-22 10:30 ` [PATCH 29/37] ARM: dts: r8a7745: Add audio DMAC support Simon Horman
2017-12-22 10:30   ` Simon Horman
2017-12-22 10:30 ` Simon Horman [this message]
2017-12-22 10:30   ` [PATCH 30/37] ARM: dts: r8a7745: Add sound support Simon Horman
2017-12-22 10:30 ` [PATCH 31/37] ARM: dts: iwg22d-sodimm: Enable SGTL5000 audio codec Simon Horman
2017-12-22 10:30   ` Simon Horman
2017-12-22 10:30 ` [PATCH 32/37] ARM: dts: iwg22d-sodimm: Sound PIO support Simon Horman
2017-12-22 10:30   ` Simon Horman
2017-12-22 10:30 ` [PATCH 33/37] ARM: dts: iwg22d-sodimm: Sound DMA support on DTS Simon Horman
2017-12-22 10:30   ` Simon Horman
2017-12-22 10:30 ` [PATCH 34/37] ARM: dts: iwg22d-sodimm: Sound DMA support via BUSIF " Simon Horman
2017-12-22 10:30   ` Simon Horman
2017-12-22 10:30 ` [PATCH 35/37] ARM: dts: iwg22d-sodimm: Sound DMA support via SRC " Simon Horman
2017-12-22 10:30   ` Simon Horman
2017-12-22 10:30 ` [PATCH 36/37] ARM: dts: iwg22d-sodimm: Sound DMA support via DVC " Simon Horman
2017-12-22 10:30   ` Simon Horman
2017-12-22 10:30 ` [PATCH 37/37] ARM: dts: r8a7745: Add missing clock for secondary CA7 CPU core Simon Horman
2017-12-22 10:30   ` Simon Horman
2018-01-05  6:51 ` [GIT PULL] Second Round of Renesas ARM Based SoC DT Updates for v4.16 Olof Johansson
2018-01-05  6:51   ` Olof Johansson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=17d2e479d09e597c9915f0ab853edfa8f5010476.1513938145.git.horms+renesas@verge.net.au \
    --to=horms+renesas@verge.net.au \
    --cc=biju.das@bp.renesas.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=magnus.damm@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.