All of lore.kernel.org
 help / color / mirror / Atom feed
From: Naohiro Aota <naohiro.aota@wdc.com>
To: linux-btrfs@vger.kernel.org, dsterba@suse.com
Cc: hare@suse.com, linux-fsdevel@vger.kernel.org,
	Jens Axboe <axboe@kernel.dk>,
	Christoph Hellwig <hch@infradead.org>,
	"Darrick J. Wong" <darrick.wong@oracle.com>,
	Naohiro Aota <naohiro.aota@wdc.com>,
	Josef Bacik <josef@toxicpanda.com>,
	Anand Jain <anand.jain@oracle.com>
Subject: [PATCH v13 11/42] btrfs: load zone's allocation offset
Date: Fri, 22 Jan 2021 15:21:11 +0900	[thread overview]
Message-ID: <18b4014ae7ff556ccc0d2287ea9e68c08dd84643.1611295439.git.naohiro.aota@wdc.com> (raw)
In-Reply-To: <cover.1611295439.git.naohiro.aota@wdc.com>

Zoned btrfs must allocate blocks at the zones' write pointer. The device's
write pointer position can be mapped to a logical address within a block
group. This commit adds "alloc_offset" to track the logical address.

This logical address is populated in btrfs_load_block_group_zone_info()
from write pointers of corresponding zones.

For now, zoned btrfs only support the SINGLE profile. Supporting non-SINGLE
profile with zone append writing is not trivial. For example, in the DUP
profile, we send a zone append writing IO to two zones on a device. The
device reply with written LBAs for the IOs. If the offsets of the returned
addresses from the beginning of the zone are different, then it results in
different logical addresses.

We need fine-grained logical to physical mapping to support such separated
physical address issue. Since it should require additional metadata type,
disable non-SINGLE profiles for now.

This commit supports the case all the zones in a block group are
sequential. The next patch will handle the case having a conventional zone.

Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
---
 fs/btrfs/block-group.c |  15 +++++
 fs/btrfs/block-group.h |   6 ++
 fs/btrfs/zoned.c       | 150 +++++++++++++++++++++++++++++++++++++++++
 fs/btrfs/zoned.h       |   7 ++
 4 files changed, 178 insertions(+)

diff --git a/fs/btrfs/block-group.c b/fs/btrfs/block-group.c
index 60d843f341aa..1c5ed46d376c 100644
--- a/fs/btrfs/block-group.c
+++ b/fs/btrfs/block-group.c
@@ -15,6 +15,7 @@
 #include "delalloc-space.h"
 #include "discard.h"
 #include "raid56.h"
+#include "zoned.h"
 
 /*
  * Return target flags in extended format or 0 if restripe for this chunk_type
@@ -1842,6 +1843,13 @@ static int read_one_block_group(struct btrfs_fs_info *info,
 			goto error;
 	}
 
+	ret = btrfs_load_block_group_zone_info(cache);
+	if (ret) {
+		btrfs_err(info, "zoned: failed to load zone info of bg %llu",
+			  cache->start);
+		goto error;
+	}
+
 	/*
 	 * We need to exclude the super stripes now so that the space info has
 	 * super bytes accounted for, otherwise we'll think we have more space
@@ -2129,6 +2137,13 @@ int btrfs_make_block_group(struct btrfs_trans_handle *trans, u64 bytes_used,
 	cache->cached = BTRFS_CACHE_FINISHED;
 	if (btrfs_fs_compat_ro(fs_info, FREE_SPACE_TREE))
 		cache->needs_free_space = 1;
+
+	ret = btrfs_load_block_group_zone_info(cache);
+	if (ret) {
+		btrfs_put_block_group(cache);
+		return ret;
+	}
+
 	ret = exclude_super_stripes(cache);
 	if (ret) {
 		/* We may have excluded something, so call this just in case */
diff --git a/fs/btrfs/block-group.h b/fs/btrfs/block-group.h
index 8f74a96074f7..9d026ab1768d 100644
--- a/fs/btrfs/block-group.h
+++ b/fs/btrfs/block-group.h
@@ -183,6 +183,12 @@ struct btrfs_block_group {
 
 	/* Record locked full stripes for RAID5/6 block group */
 	struct btrfs_full_stripe_locks_tree full_stripe_locks_root;
+
+	/*
+	 * Allocation offset for the block group to implement sequential
+	 * allocation. This is used only with ZONED mode enabled.
+	 */
+	u64 alloc_offset;
 };
 
 static inline u64 btrfs_block_group_end(struct btrfs_block_group *block_group)
diff --git a/fs/btrfs/zoned.c b/fs/btrfs/zoned.c
index e829fa2df8ac..22c0665ee816 100644
--- a/fs/btrfs/zoned.c
+++ b/fs/btrfs/zoned.c
@@ -3,14 +3,20 @@
 #include <linux/bitops.h>
 #include <linux/slab.h>
 #include <linux/blkdev.h>
+#include <linux/sched/mm.h>
 #include "ctree.h"
 #include "volumes.h"
 #include "zoned.h"
 #include "rcu-string.h"
 #include "disk-io.h"
+#include "block-group.h"
 
 /* Maximum number of zones to report per blkdev_report_zones() call */
 #define BTRFS_REPORT_NR_ZONES   4096
+/* Invalid allocation pointer value for missing devices */
+#define WP_MISSING_DEV ((u64)-1)
+/* Pseudo write pointer value for conventional zone */
+#define WP_CONVENTIONAL ((u64)-2)
 
 /* Number of superblock log zones */
 #define BTRFS_NR_SB_LOG_ZONES 2
@@ -923,3 +929,147 @@ int btrfs_ensure_empty_zones(struct btrfs_device *device, u64 start, u64 size)
 
 	return 0;
 }
+
+int btrfs_load_block_group_zone_info(struct btrfs_block_group *cache)
+{
+	struct btrfs_fs_info *fs_info = cache->fs_info;
+	struct extent_map_tree *em_tree = &fs_info->mapping_tree;
+	struct extent_map *em;
+	struct map_lookup *map;
+	struct btrfs_device *device;
+	u64 logical = cache->start;
+	u64 length = cache->length;
+	u64 physical = 0;
+	int ret;
+	int i;
+	unsigned int nofs_flag;
+	u64 *alloc_offsets = NULL;
+	u32 num_sequential = 0, num_conventional = 0;
+
+	if (!btrfs_is_zoned(fs_info))
+		return 0;
+
+	/* Sanity check */
+	if (!IS_ALIGNED(length, fs_info->zone_size)) {
+		btrfs_err(fs_info, "zoned: block group %llu len %llu unaligned to zone size %llu",
+			  logical, length, fs_info->zone_size);
+		return -EIO;
+	}
+
+	/* Get the chunk mapping */
+	read_lock(&em_tree->lock);
+	em = lookup_extent_mapping(em_tree, logical, length);
+	read_unlock(&em_tree->lock);
+
+	if (!em)
+		return -EINVAL;
+
+	map = em->map_lookup;
+
+	alloc_offsets = kcalloc(map->num_stripes, sizeof(*alloc_offsets),
+				GFP_NOFS);
+	if (!alloc_offsets) {
+		free_extent_map(em);
+		return -ENOMEM;
+	}
+
+	for (i = 0; i < map->num_stripes; i++) {
+		bool is_sequential;
+		struct blk_zone zone;
+
+		device = map->stripes[i].dev;
+		physical = map->stripes[i].physical;
+
+		if (device->bdev == NULL) {
+			alloc_offsets[i] = WP_MISSING_DEV;
+			continue;
+		}
+
+		is_sequential = btrfs_dev_is_sequential(device, physical);
+		if (is_sequential)
+			num_sequential++;
+		else
+			num_conventional++;
+
+		if (!is_sequential) {
+			alloc_offsets[i] = WP_CONVENTIONAL;
+			continue;
+		}
+
+		/*
+		 * This zone will be used for allocation, so mark this
+		 * zone non-empty.
+		 */
+		btrfs_dev_clear_zone_empty(device, physical);
+
+		/*
+		 * The group is mapped to a sequential zone. Get the zone write
+		 * pointer to determine the allocation offset within the zone.
+		 */
+		WARN_ON(!IS_ALIGNED(physical, fs_info->zone_size));
+		nofs_flag = memalloc_nofs_save();
+		ret = btrfs_get_dev_zone(device, physical, &zone);
+		memalloc_nofs_restore(nofs_flag);
+		if (ret == -EIO || ret == -EOPNOTSUPP) {
+			ret = 0;
+			alloc_offsets[i] = WP_MISSING_DEV;
+			continue;
+		} else if (ret) {
+			goto out;
+		}
+
+		switch (zone.cond) {
+		case BLK_ZONE_COND_OFFLINE:
+		case BLK_ZONE_COND_READONLY:
+			btrfs_err(fs_info, "zoned: offline/readonly zone %llu on device %s (devid %llu)",
+				  physical >> device->zone_info->zone_size_shift,
+				  rcu_str_deref(device->name), device->devid);
+			alloc_offsets[i] = WP_MISSING_DEV;
+			break;
+		case BLK_ZONE_COND_EMPTY:
+			alloc_offsets[i] = 0;
+			break;
+		case BLK_ZONE_COND_FULL:
+			alloc_offsets[i] = fs_info->zone_size;
+			break;
+		default:
+			/* Partially used zone */
+			alloc_offsets[i] =
+				((zone.wp - zone.start) << SECTOR_SHIFT);
+			break;
+		}
+	}
+
+	if (num_conventional > 0) {
+		/*
+		 * Since conventional zones do not have a write pointer, we
+		 * cannot determine alloc_offset from the pointer
+		 */
+		ret = -EINVAL;
+		goto out;
+	}
+
+	switch (map->type & BTRFS_BLOCK_GROUP_PROFILE_MASK) {
+	case 0: /* single */
+		cache->alloc_offset = alloc_offsets[0];
+		break;
+	case BTRFS_BLOCK_GROUP_DUP:
+	case BTRFS_BLOCK_GROUP_RAID1:
+	case BTRFS_BLOCK_GROUP_RAID0:
+	case BTRFS_BLOCK_GROUP_RAID10:
+	case BTRFS_BLOCK_GROUP_RAID5:
+	case BTRFS_BLOCK_GROUP_RAID6:
+		/* non-SINGLE profiles are not supported yet */
+	default:
+		btrfs_err(fs_info, "zoned: profile %s not supported",
+			  btrfs_bg_type_to_raid_name(map->type));
+		ret = -EINVAL;
+		goto out;
+	}
+
+out:
+	kfree(alloc_offsets);
+	free_extent_map(em);
+
+	return ret;
+}
diff --git a/fs/btrfs/zoned.h b/fs/btrfs/zoned.h
index de5901f5ae66..491b98c97f48 100644
--- a/fs/btrfs/zoned.h
+++ b/fs/btrfs/zoned.h
@@ -41,6 +41,7 @@ u64 btrfs_find_allocatable_zones(struct btrfs_device *device, u64 hole_start,
 int btrfs_reset_device_zone(struct btrfs_device *device, u64 physical,
 			    u64 length, u64 *bytes);
 int btrfs_ensure_empty_zones(struct btrfs_device *device, u64 start, u64 size);
+int btrfs_load_block_group_zone_info(struct btrfs_block_group *cache);
 #else /* CONFIG_BLK_DEV_ZONED */
 static inline int btrfs_get_dev_zone(struct btrfs_device *device, u64 pos,
 				     struct blk_zone *zone)
@@ -117,6 +118,12 @@ static inline int btrfs_ensure_empty_zones(struct btrfs_device *device,
 	return 0;
 }
 
+static inline int btrfs_load_block_group_zone_info(
+	struct btrfs_block_group *cache)
+{
+	return 0;
+}
+
 #endif
 
 static inline bool btrfs_dev_is_sequential(struct btrfs_device *device, u64 pos)
-- 
2.27.0


  parent reply	other threads:[~2021-01-22  6:26 UTC|newest]

Thread overview: 62+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-01-22  6:21 [PATCH v13 00/42] btrfs: zoned block device support Naohiro Aota
2021-01-22  6:21 ` [PATCH v13 01/42] block: add bio_add_zone_append_page Naohiro Aota
2021-01-23  2:50   ` Chaitanya Kulkarni
2021-01-23  3:08   ` Chaitanya Kulkarni
2021-01-25 17:31   ` Johannes Thumshirn
2021-01-22  6:21 ` [PATCH v13 02/42] iomap: support REQ_OP_ZONE_APPEND Naohiro Aota
2021-01-23  2:56   ` Chaitanya Kulkarni
2021-01-22  6:21 ` [PATCH v13 03/42] btrfs: defer loading zone info after opening trees Naohiro Aota
2021-01-22  6:21 ` [PATCH v13 04/42] btrfs: use regular SB location on emulated zoned mode Naohiro Aota
2021-01-22  6:21 ` [PATCH v13 05/42] btrfs: release path before calling into btrfs_load_block_group_zone_info Naohiro Aota
2021-01-22 14:57   ` Josef Bacik
2021-01-22  6:21 ` [PATCH v13 06/42] btrfs: do not load fs_info->zoned from incompat flag Naohiro Aota
2021-01-22 14:58   ` Josef Bacik
2021-01-22  6:21 ` [PATCH v13 07/42] btrfs: disallow fitrim in ZONED mode Naohiro Aota
2021-01-22 14:59   ` Josef Bacik
2021-01-22  6:21 ` [PATCH v13 08/42] btrfs: allow zoned mode on non-zoned block devices Naohiro Aota
2021-01-22 15:03   ` Josef Bacik
2021-01-22  6:21 ` [PATCH v13 09/42] btrfs: implement zoned chunk allocator Naohiro Aota
2021-01-22  6:21 ` [PATCH v13 10/42] btrfs: verify device extent is aligned to zone Naohiro Aota
2021-01-22  6:21 ` Naohiro Aota [this message]
2021-01-22  6:21 ` [PATCH v13 12/42] btrfs: calculate allocation offset for conventional zones Naohiro Aota
2021-01-22 15:07   ` Josef Bacik
2021-01-22  6:21 ` [PATCH v13 13/42] btrfs: track unusable bytes for zones Naohiro Aota
2021-01-22 15:11   ` Josef Bacik
2021-01-25 10:37     ` Johannes Thumshirn
2021-01-25 12:08       ` Johannes Thumshirn
2021-01-22  6:21 ` [PATCH v13 14/42] btrfs: do sequential extent allocation in ZONED mode Naohiro Aota
2021-01-22  6:21 ` [PATCH v13 15/42] btrfs: redirty released extent buffers " Naohiro Aota
2021-01-22  6:21 ` [PATCH v13 16/42] btrfs: advance allocation pointer after tree log node Naohiro Aota
2021-01-22  6:21 ` [PATCH v13 17/42] btrfs: enable to mount ZONED incompat flag Naohiro Aota
2021-01-22  6:21 ` [PATCH v13 18/42] btrfs: reset zones of unused block groups Naohiro Aota
2021-01-22  6:21 ` [PATCH v13 19/42] btrfs: extract page adding function Naohiro Aota
2021-01-22  6:21 ` [PATCH v13 20/42] btrfs: use bio_add_zone_append_page for zoned btrfs Naohiro Aota
2021-01-22  6:21 ` [PATCH v13 21/42] btrfs: handle REQ_OP_ZONE_APPEND as writing Naohiro Aota
2021-01-22  6:21 ` [PATCH v13 22/42] btrfs: split ordered extent when bio is sent Naohiro Aota
2021-01-22 15:22   ` Josef Bacik
2021-01-25  8:56     ` Johannes Thumshirn
2021-01-25  9:02     ` Johannes Thumshirn
2021-01-22  6:21 ` [PATCH v13 23/42] btrfs: check if bio spans across an ordered extent Naohiro Aota
2021-01-22 15:23   ` Josef Bacik
2021-01-22  6:21 ` [PATCH v13 24/42] btrfs: extend btrfs_rmap_block for specifying a device Naohiro Aota
2021-01-22  6:21 ` [PATCH v13 25/42] btrfs: cache if block-group is on a sequential zone Naohiro Aota
2021-01-22  6:21 ` [PATCH v13 26/42] btrfs: save irq flags when looking up an ordered extent Naohiro Aota
2021-01-22 15:24   ` Josef Bacik
2021-01-22  6:21 ` [PATCH v13 27/42] btrfs: use ZONE_APPEND write for ZONED btrfs Naohiro Aota
2021-01-22 15:29   ` Josef Bacik
2021-01-22  6:21 ` [PATCH v13 28/42] btrfs: enable zone append writing for direct IO Naohiro Aota
2021-01-22  6:21 ` [PATCH v13 29/42] btrfs: introduce dedicated data write path for ZONED mode Naohiro Aota
2021-01-22  6:21 ` [PATCH v13 30/42] btrfs: serialize meta IOs on " Naohiro Aota
2021-01-22  6:21 ` [PATCH v13 31/42] btrfs: wait existing extents before truncating Naohiro Aota
2021-01-22  6:21 ` [PATCH v13 32/42] btrfs: avoid async metadata checksum on ZONED mode Naohiro Aota
2021-01-22  6:21 ` [PATCH v13 33/42] btrfs: mark block groups to copy for device-replace Naohiro Aota
2021-01-22  6:21 ` [PATCH v13 34/42] btrfs: implement cloning for ZONED device-replace Naohiro Aota
2021-01-22  6:21 ` [PATCH v13 35/42] btrfs: implement copying " Naohiro Aota
2021-01-22  6:21 ` [PATCH v13 36/42] btrfs: support dev-replace in ZONED mode Naohiro Aota
2021-01-22  6:21 ` [PATCH v13 37/42] btrfs: enable relocation " Naohiro Aota
2021-01-22  6:21 ` [PATCH v13 38/42] btrfs: relocate block group to repair IO failure in ZONED Naohiro Aota
2021-01-22  6:21 ` [PATCH v13 39/42] btrfs: split alloc_log_tree() Naohiro Aota
2021-01-22  6:21 ` [PATCH v13 40/42] btrfs: extend zoned allocator to use dedicated tree-log block group Naohiro Aota
2021-01-22  6:21 ` [PATCH v13 41/42] btrfs: serialize log transaction on ZONED mode Naohiro Aota
2021-01-22 15:37   ` Josef Bacik
2021-01-22  6:21 ` [PATCH v13 42/42] btrfs: reorder log node allocation Naohiro Aota

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=18b4014ae7ff556ccc0d2287ea9e68c08dd84643.1611295439.git.naohiro.aota@wdc.com \
    --to=naohiro.aota@wdc.com \
    --cc=anand.jain@oracle.com \
    --cc=axboe@kernel.dk \
    --cc=darrick.wong@oracle.com \
    --cc=dsterba@suse.com \
    --cc=hare@suse.com \
    --cc=hch@infradead.org \
    --cc=josef@toxicpanda.com \
    --cc=linux-btrfs@vger.kernel.org \
    --cc=linux-fsdevel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.