From: Dominic Curran <dcurran@ti.com>
To: linux-omap <linux-omap@vger.kernel.org>
Subject: [OMAPZOOM][PATCH 3/3] ISP: Remove unneeded Previewer offset settings.
Date: Thu, 26 Feb 2009 16:40:02 -0600 [thread overview]
Message-ID: <200902261640.02952.dcurran@ti.com> (raw)
From: Dominic Curran <dcurran@ti.com>
Subject: [OMAPZOOM][PATCH 3/3] ISP: Remove unneeded Previewer offset settings.
Before this patch set the component order was controlled by chnaging offsets in
the Previewer module.
This was rather unsatifactory because output component order from CCDC differed
depending on sensor.
The 2nd patch in this series fixes this and causes the CCDC output component
order to be consistent for all sensors regardless of the input order.
This means that input component order is always the same for Previewer, and
therefore there is no need to compensate for different offsets in Previewer.
This patch removed the Preveiwer offset compensation from the board file, whic is
now unnecessary.
Signed-off-by: Dominic Curran <dcurran@ti.com>
---
arch/arm/mach-omap2/board-3430sdp.c | 6 ------
arch/arm/mach-omap2/board-ldp.c | 2 --
arch/arm/mach-omap2/board-zoom2.c | 2 --
drivers/media/video/isp/isp.c | 1 -
drivers/media/video/isp/isp.h | 2 --
5 files changed, 13 deletions(-)
Index: omapzoom04/arch/arm/mach-omap2/board-3430sdp.c
===================================================================
--- omapzoom04.orig/arch/arm/mach-omap2/board-3430sdp.c
+++ omapzoom04/arch/arm/mach-omap2/board-3430sdp.c
@@ -657,8 +657,6 @@ static struct isp_interface_config mt9p0
.strobe = 0x0,
.prestrobe = 0x0,
.shutter = 0x0,
- .prev_sph = 2,
- .prev_slv = 0,
.wenlog = ISPCCDC_CFG_WENLOG_OR,
.dcsub = 42,
.raw_fmt_in = ISPCCDC_INPUT_FMT_GR_BG,
@@ -782,8 +780,6 @@ static struct isp_interface_config ov364
.strobe = 0x0,
.prestrobe = 0x0,
.shutter = 0x0,
- .prev_sph = 2,
- .prev_slv = 0,
.wenlog = ISPCCDC_CFG_WENLOG_AND,
.dcsub = OV3640_BLACK_LEVEL_10BIT,
.raw_fmt_in = ISPCCDC_INPUT_FMT_BG_GR,
@@ -992,8 +988,6 @@ static struct isp_interface_config imx04
.strobe = 0x0,
.prestrobe = 0x0,
.shutter = 0x0,
- .prev_sph = 2,
- .prev_slv = 0,
.wenlog = ISPCCDC_CFG_WENLOG_OR,
.dcsub = IMX046_BLACK_LEVEL_AVG,
.raw_fmt_in = ISPCCDC_INPUT_FMT_RG_GB,
Index: omapzoom04/arch/arm/mach-omap2/board-ldp.c
===================================================================
--- omapzoom04.orig/arch/arm/mach-omap2/board-ldp.c
+++ omapzoom04/arch/arm/mach-omap2/board-ldp.c
@@ -622,8 +622,6 @@ static struct isp_interface_config ov364
.strobe = 0x0,
.prestrobe = 0x0,
.shutter = 0x0,
- .prev_sph = 2,
- .prev_slv = 0,
.wenlog = ISPCCDC_CFG_WENLOG_AND,
.dcsub = OV3640_BLACK_LEVEL_10BIT,
.raw_fmt_in = ISPCCDC_INPUT_FMT_BG_GR,
Index: omapzoom04/arch/arm/mach-omap2/board-zoom2.c
===================================================================
--- omapzoom04.orig/arch/arm/mach-omap2/board-zoom2.c
+++ omapzoom04/arch/arm/mach-omap2/board-zoom2.c
@@ -368,8 +368,6 @@ static struct isp_interface_config imx04
.strobe = 0x0,
.prestrobe = 0x0,
.shutter = 0x0,
- .prev_sph = 2,
- .prev_slv = 0,
.wenlog = ISPCCDC_CFG_WENLOG_OR,
.dcsub = IMX046_BLACK_LEVEL_AVG,
.raw_fmt_in = ISPCCDC_INPUT_FMT_RG_GB,
Index: omapzoom04/drivers/media/video/isp/isp.c
===================================================================
--- omapzoom04.orig/drivers/media/video/isp/isp.c
+++ omapzoom04/drivers/media/video/isp/isp.c
@@ -949,7 +949,6 @@ int isp_configure_interface(struct isp_i
ISPCCDC_VDINT);
/* Set sensor specific fields in CCDC and Previewer module.*/
- isppreview_set_skip(config->prev_sph, config->prev_slv);
ispccdc_set_wenlog(config->wenlog);
ispccdc_set_dcsub(config->dcsub);
ispccdc_set_crop_offset(config->raw_fmt_in);
Index: omapzoom04/drivers/media/video/isp/isp.h
===================================================================
--- omapzoom04.orig/drivers/media/video/isp/isp.h
+++ omapzoom04/drivers/media/video/isp/isp.h
@@ -202,8 +202,6 @@ struct isp_interface_config {
int strobe;
int prestrobe;
int shutter;
- u32 prev_sph;
- u32 prev_slv;
u32 wenlog;
u32 dcsub;
enum ispccdc_raw_fmt raw_fmt_in;
reply other threads:[~2009-02-26 22:40 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200902261640.02952.dcurran@ti.com \
--to=dcurran@ti.com \
--cc=linux-omap@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.