[RFC][PATCH 2/2] radeonfb: Use platform_pci_set_power_state()

From: "Rafael J. Wysocki" <rjw@sisk.pl>
To: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>,
	Linux PCI <linux-pci@vger.kernel.org>,
	pm list <linux-pm@lists.linux-foundation.org>,
	LKML <linux-kernel@vger.kernel.org>,
	Linus Torvalds <torvalds@linux-foundation.org>,
	Andrew Morton <akpm@linux-foundation.org>
Subject: [RFC][PATCH 2/2] radeonfb: Use platform_pci_set_power_state()
Date: Mon, 23 Mar 2009 22:32:55 +0100	[thread overview]
Message-ID: <200903232232.56772.rjw@sisk.pl> (raw)
In-Reply-To: <200903232230.10831.rjw@sisk.pl>

From: Rafael J. Wysocki <rjw@sisk.pl>

Use platform_pci_set_power_state() to finalize the transition into D2
after programming the PMCSR of the device directly.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
---
 drivers/video/aty/radeon_pm.c |    2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Index: linux-2.6/drivers/video/aty/radeon_pm.c
===================================================================

--- linux-2.6.orig/drivers/video/aty/radeon_pm.c
+++ linux-2.6/drivers/video/aty/radeon_pm.c
@@ -2582,7 +2582,7 @@ static void radeon_set_suspend(struct ra
 		 * calling pci_set_power_state()
 		 */
 		radeonfb_whack_power_state(rinfo, PCI_D2);
-		pci_set_power_state(rinfo->pdev, PCI_D2);
+		platform_pci_set_power_state(rinfo->pdev, PCI_D2);
 	} else {
 		printk(KERN_DEBUG "radeonfb (%s): switching to D0 state...\n",
 		       pci_name(rinfo->pdev));
