From: bmarzins@sourceware.org
To: dm-cvs@sourceware.org, dm-devel@redhat.com
Subject: multipath-tools ./Makefile.inc ./multipath.con ...
Date: 5 May 2009 22:02:32 -0000 [thread overview]
Message-ID: <20090505220232.3766.qmail@sourceware.org> (raw)
CVSROOT: /cvs/dm
Module name: multipath-tools
Branch: RHEL5_FC6
Changes by: bmarzins@sourceware.org 2009-05-05 22:02:31
Modified files:
. : Makefile.inc multipath.conf.annotated
libmultipath : hwtable.c
multipath : Makefile
Added files:
multipath : multipath.conf.5
Log message:
Fixes for bzs #462776, #481227, #485296, and #489030
These are all fixes to either config files or documentation.
Patches:
http://sourceware.org/cgi-bin/cvsweb.cgi/multipath-tools/Makefile.inc.diff?cvsroot=dm&only_with_tag=RHEL5_FC6&r1=1.3&r2=1.3.2.1
http://sourceware.org/cgi-bin/cvsweb.cgi/multipath-tools/multipath.conf.annotated.diff?cvsroot=dm&only_with_tag=RHEL5_FC6&r1=1.18.2.11&r2=1.18.2.12
http://sourceware.org/cgi-bin/cvsweb.cgi/multipath-tools/libmultipath/hwtable.c.diff?cvsroot=dm&only_with_tag=RHEL5_FC6&r1=1.20.2.17&r2=1.20.2.18
http://sourceware.org/cgi-bin/cvsweb.cgi/multipath-tools/multipath/multipath.conf.5.diff?cvsroot=dm&only_with_tag=RHEL5_FC6&r1=NONE&r2=1.1.2.1
http://sourceware.org/cgi-bin/cvsweb.cgi/multipath-tools/multipath/Makefile.diff?cvsroot=dm&only_with_tag=RHEL5_FC6&r1=1.17&r2=1.17.2.1
--- multipath-tools/Makefile.inc 2006/06/06 18:32:43 1.3
+++ multipath-tools/Makefile.inc 2009/05/05 22:02:30 1.3.2.1
@@ -26,6 +26,7 @@
checkersdir = $(TOPDIR)/libcheckers
multipathdir = $(TOPDIR)/libmultipath
mandir = $(prefix)/usr/share/man/man8
+man5dir = $(prefix)/usr/share/man/man5
rcdir = $(prefix)/etc/init.d
GZIP = /bin/gzip -9 -c
--- multipath-tools/multipath.conf.annotated 2009/04/29 04:41:32 1.18.2.11
+++ multipath-tools/multipath.conf.annotated 2009/05/05 22:02:30 1.18.2.12
@@ -28,7 +28,9 @@
# #
# # name : polling_interval
# # scope : multipathd
-# # desc : interval between two path checks in seconds
+# # desc : How often a path's state is checked, in seconds. For
+# # paths that are usable, the time between checks will
+# # gradually increase to (4 * polling_interval).
# # default : 5
# #
# polling_interval 10
--- multipath-tools/libmultipath/hwtable.c 2009/04/03 15:09:02 1.20.2.17
+++ multipath-tools/libmultipath/hwtable.c 2009/05/05 22:02:31 1.20.2.18
@@ -338,9 +338,9 @@
.checker_name = RDAC,
},
{
- /* IBM DS3400 */
+ /* IBM DS4100 */
.vendor = "IBM",
- .product = "1726-4xx",
+ .product = "1724",
.getuid = DEFAULT_GETUID,
.getprio = "/sbin/mpath_prio_rdac /dev/%n",
.features = "1 queue_if_no_path",
@@ -354,7 +354,23 @@
.checker_name = RDAC,
},
{
- /* IBM DS4100 / FAStT100 */
+ /* IBM DS3200, IBM DS3300, IBM DS3400 */
+ .vendor = "IBM",
+ .product = "1726",
+ .getuid = DEFAULT_GETUID,
+ .getprio = "/sbin/mpath_prio_rdac /dev/%n",
+ .features = "1 queue_if_no_path",
+ .hwhandler = "1 rdac",
+ .selector = DEFAULT_SELECTOR,
+ .pgpolicy = GROUP_BY_PRIO,
+ .pgfailback = -FAILBACK_IMMEDIATE,
+ .rr_weight = RR_WEIGHT_NONE,
+ .no_path_retry = 300,
+ .minio = DEFAULT_MINIO,
+ .checker_name = RDAC,
+ },
+ {
+ /* IBM DS4400 / DS4500 / FAStT100 */
.vendor = "IBM",
.product = "1742",
.getuid = DEFAULT_GETUID,
@@ -370,6 +386,22 @@
.checker_name = RDAC,
},
{
+ /* IBM DS4700 */
+ .vendor = "IBM",
+ .product = "1814",
+ .getuid = DEFAULT_GETUID,
+ .getprio = "/sbin/mpath_prio_rdac /dev/%n",
+ .features = DEFAULT_FEATURES,
+ .hwhandler = "1 rdac",
+ .selector = DEFAULT_SELECTOR,
+ .pgpolicy = GROUP_BY_PRIO,
+ .pgfailback = -FAILBACK_IMMEDIATE,
+ .rr_weight = RR_WEIGHT_NONE,
+ .no_path_retry = NO_PATH_RETRY_QUEUE,
+ .minio = DEFAULT_MINIO,
+ .checker_name = RDAC,
+ },
+ {
/* IBM DS4800 */
.vendor = "IBM",
.product = "1815",
@@ -386,6 +418,22 @@
.checker_name = RDAC,
},
{
+ /* IBM DS5000 */
+ .vendor = "IBM",
+ .product = "1818",
+ .getuid = DEFAULT_GETUID,
+ .getprio = "/sbin/mpath_prio_rdac /dev/%n",
+ .features = DEFAULT_FEATURES,
+ .hwhandler = "1 rdac",
+ .selector = DEFAULT_SELECTOR,
+ .pgpolicy = GROUP_BY_PRIO,
+ .pgfailback = -FAILBACK_IMMEDIATE,
+ .rr_weight = RR_WEIGHT_NONE,
+ .no_path_retry = NO_PATH_RETRY_QUEUE,
+ .minio = DEFAULT_MINIO,
+ .checker_name = RDAC,
+ },
+ {
/* IBM Netfinity Fibre Channel RAID Controller Unit */
.vendor = "IBM",
.product = "3526",
@@ -741,6 +789,27 @@
.minio = DEFAULT_MINIO,
.checker_name = READSECTOR0,
},
+ /*
+ * Compellent Technologies, Inc.
+ *
+ * Maintainer : Jim Lester, Compellent
+ * Mail : jim.lester@compellent.com
+ */
+ {
+ .vendor = "COMPELNT",
+ .product = "Compellent Vol",
+ .getuid = DEFAULT_GETUID,
+ .getprio = NULL,
+ .features = DEFAULT_FEATURES,
+ .hwhandler = DEFAULT_HWHANDLER,
+ .selector = DEFAULT_SELECTOR,
+ .pgpolicy = MULTIBUS,
+ .pgfailback = -FAILBACK_IMMEDIATE,
+ .rr_weight = RR_WEIGHT_NONE,
+ .no_path_retry = NO_PATH_RETRY_QUEUE,
+ .minio = DEFAULT_MINIO,
+ .checker_name = TUR,
+ },
/*
* GNBD devices
*
--- multipath-tools/multipath/Makefile 2006/11/30 23:25:13 1.17
+++ multipath-tools/multipath/Makefile 2009/05/05 22:02:31 1.17.2.1
@@ -41,6 +41,8 @@
install -m 644 multipath.rules $(DESTDIR)/etc/udev/rules.d/40-multipath.rules
install -d $(DESTDIR)$(mandir)
install -m 644 $(EXEC).8 $(DESTDIR)$(mandir)
+ install -d $(DESTDIR)$(man5dir)
+ install -m 644 $(EXEC).5 $(DESTDIR)$(man5dir)
@if [ ! -e $(DESTDIR)/etc/multipath.conf ]; then \
install -m 644 multipath.conf.redhat $(DESTDIR)/etc/multipath.conf; \
fi
@@ -53,6 +55,7 @@
rm $(DESTDIR)$(bindir)/mpath_wait
rm $(DESTDIR)$(bindir)/mpath_ctl
rm $(DESTDIR)$(mandir)/$(EXEC).8
+ rm $(DESTDIR)$(mandir)/$(EXEC).conf.5
clean:
$(MAKE) -C $(multipathdir) clean
reply other threads:[~2009-05-05 22:02 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20090505220232.3766.qmail@sourceware.org \
--to=bmarzins@sourceware.org \
--cc=dm-cvs@sourceware.org \
--cc=dm-devel@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.