All of lore.kernel.org
 help / color / mirror / Atom feed
From: Magnus Damm <magnus.damm@gmail.com>
To: linux-sh@vger.kernel.org
Subject: [PATCH] sh: TMU platform data for sh7785
Date: Thu, 07 May 2009 10:55:37 +0000	[thread overview]
Message-ID: <20090507105537.32064.15406.sendpatchset@rx1.opensource.se> (raw)

From: Magnus Damm <damm@igel.co.jp>

This patch adds TMU platform data for sh7785. Both clockevent
and clocksource support is enabled.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
---

 Tested on sh7785lcr and r7785 highlander.

 For correct run-time behaviour this patch is needed:
 "clocksource: setup mult_orig in clocksource_enable()"

 arch/sh/Kconfig                        |    1 
 arch/sh/kernel/cpu/sh4a/setup-sh7785.c |  204 ++++++++++++++++++++++++++++++++
 2 files changed, 205 insertions(+)

--- 0001/arch/sh/Kconfig
+++ work/arch/sh/Kconfig	2009-05-07 16:35:25.000000000 +0900
@@ -389,6 +389,7 @@ config CPU_SUBTYPE_SH7785
 	select CPU_SHX2
 	select ARCH_SPARSEMEM_ENABLE
 	select SYS_SUPPORTS_NUMA
+	select SYS_SUPPORTS_TMU
 
 config CPU_SUBTYPE_SH7786
 	bool "Support SH7786 processor"
--- 0001/arch/sh/kernel/cpu/sh4a/setup-sh7785.c
+++ work/arch/sh/kernel/cpu/sh4a/setup-sh7785.c	2009-05-07 16:35:35.000000000 +0900
@@ -13,8 +13,191 @@
 #include <linux/serial_sci.h>
 #include <linux/io.h>
 #include <linux/mm.h>
+#include <linux/sh_timer.h>
 #include <asm/mmzone.h>
 
+static struct sh_timer_config tmu0_platform_data = {
+	.name = "TMU0",
+	.channel_offset = 0x04,
+	.timer_bit = 0,
+	.clk = "module_clk",
+	.clockevent_rating = 200,
+};
+
+static struct resource tmu0_resources[] = {
+	[0] = {
+		.name	= "TMU0",
+		.start	= 0xffd80008,
+		.end	= 0xffd80013,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 28,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device tmu0_device = {
+	.name		= "sh_tmu",
+	.id		= 0,
+	.dev = {
+		.platform_data	= &tmu0_platform_data,
+	},
+	.resource	= tmu0_resources,
+	.num_resources	= ARRAY_SIZE(tmu0_resources),
+};
+
+static struct sh_timer_config tmu1_platform_data = {
+	.name = "TMU1",
+	.channel_offset = 0x10,
+	.timer_bit = 1,
+	.clk = "module_clk",
+	.clocksource_rating = 200,
+};
+
+static struct resource tmu1_resources[] = {
+	[0] = {
+		.name	= "TMU1",
+		.start	= 0xffd80014,
+		.end	= 0xffd8001f,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 29,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device tmu1_device = {
+	.name		= "sh_tmu",
+	.id		= 1,
+	.dev = {
+		.platform_data	= &tmu1_platform_data,
+	},
+	.resource	= tmu1_resources,
+	.num_resources	= ARRAY_SIZE(tmu1_resources),
+};
+
+static struct sh_timer_config tmu2_platform_data = {
+	.name = "TMU2",
+	.channel_offset = 0x1c,
+	.timer_bit = 2,
+	.clk = "module_clk",
+};
+
+static struct resource tmu2_resources[] = {
+	[0] = {
+		.name	= "TMU2",
+		.start	= 0xffd80020,
+		.end	= 0xffd8002f,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 30,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device tmu2_device = {
+	.name		= "sh_tmu",
+	.id		= 2,
+	.dev = {
+		.platform_data	= &tmu2_platform_data,
+	},
+	.resource	= tmu2_resources,
+	.num_resources	= ARRAY_SIZE(tmu2_resources),
+};
+
+static struct sh_timer_config tmu3_platform_data = {
+	.name = "TMU3",
+	.channel_offset = 0x04,
+	.timer_bit = 0,
+	.clk = "module_clk",
+};
+
+static struct resource tmu3_resources[] = {
+	[0] = {
+		.name	= "TMU3",
+		.start	= 0xffdc0008,
+		.end	= 0xffdc0013,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 96,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device tmu3_device = {
+	.name		= "sh_tmu",
+	.id		= 3,
+	.dev = {
+		.platform_data	= &tmu3_platform_data,
+	},
+	.resource	= tmu3_resources,
+	.num_resources	= ARRAY_SIZE(tmu3_resources),
+};
+
+static struct sh_timer_config tmu4_platform_data = {
+	.name = "TMU4",
+	.channel_offset = 0x10,
+	.timer_bit = 1,
+	.clk = "module_clk",
+};
+
+static struct resource tmu4_resources[] = {
+	[0] = {
+		.name	= "TMU4",
+		.start	= 0xffdc0014,
+		.end	= 0xffdc001f,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 97,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device tmu4_device = {
+	.name		= "sh_tmu",
+	.id		= 4,
+	.dev = {
+		.platform_data	= &tmu4_platform_data,
+	},
+	.resource	= tmu4_resources,
+	.num_resources	= ARRAY_SIZE(tmu4_resources),
+};
+
+static struct sh_timer_config tmu5_platform_data = {
+	.name = "TMU5",
+	.channel_offset = 0x1c,
+	.timer_bit = 2,
+	.clk = "module_clk",
+};
+
+static struct resource tmu5_resources[] = {
+	[0] = {
+		.name	= "TMU5",
+		.start	= 0xffdc0020,
+		.end	= 0xffdc002b,
+		.flags	= IORESOURCE_MEM,
+	},
+	[1] = {
+		.start	= 98,
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device tmu5_device = {
+	.name		= "sh_tmu",
+	.id		= 5,
+	.dev = {
+		.platform_data	= &tmu5_platform_data,
+	},
+	.resource	= tmu5_resources,
+	.num_resources	= ARRAY_SIZE(tmu5_resources),
+};
+
 static struct plat_sci_port sci_platform_data[] = {
 	{
 		.mapbase	= 0xffea0000,
@@ -60,6 +243,12 @@ static struct platform_device sci_device
 };
 
 static struct platform_device *sh7785_devices[] __initdata = {
+	&tmu0_device,
+	&tmu1_device,
+	&tmu2_device,
+	&tmu3_device,
+	&tmu4_device,
+	&tmu5_device,
 	&sci_device,
 };
 
@@ -70,6 +259,21 @@ static int __init sh7785_devices_setup(v
 }
 __initcall(sh7785_devices_setup);
 
+static struct platform_device *sh7785_early_devices[] __initdata = {
+	&tmu0_device,
+	&tmu1_device,
+	&tmu2_device,
+	&tmu3_device,
+	&tmu4_device,
+	&tmu5_device,
+};
+
+void __init plat_early_device_setup(void)
+{
+	early_platform_add_devices(sh7785_early_devices,
+				   ARRAY_SIZE(sh7785_early_devices));
+}
+
 enum {
 	UNUSED = 0,
 

                 reply	other threads:[~2009-05-07 10:55 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20090507105537.32064.15406.sendpatchset@rx1.opensource.se \
    --to=magnus.damm@gmail.com \
    --cc=linux-sh@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.