From: "Igor M. Liplianin" <liplianin@me.by>
To: Simon Kenyon <simon@koala.ie>
Cc: linux-media@vger.kernel.org
Subject: Re: [linux-dvb] SDMC DM1105N not being detected
Date: Mon, 1 Jun 2009 01:01:01 +0300 [thread overview]
Message-ID: <200906010101.01925.liplianin@me.by> (raw)
In-Reply-To: <200905302000.32353.liplianin@me.by>
[-- Attachment #1: Type: text/plain, Size: 1542 bytes --]
On 30 May 2009 20:00:32 Igor M. Liplianin wrote:
> On 26 May 2009 23:02:57 Simon Kenyon wrote:
> > Igor M. Liplianin wrote:
> > > The card is working with external LNB power supply, for example,
> > > through the loop out from another sat box. So, we need to know, which
> > > way to control LNB power on the board. Usually it is through GPIO pins.
> > > For example:
> > > Pins 112 and 111 for GPIO0, GPIO1. Also GPIO15 is at 65 pin.
> > > You can edit this lines in code:
> > > -*-*-*-*-*-*-*-*-*-*-*-*-
> > > /* GPIO's for LNB power control for Axess DM05 */
> > > #define DM05_LNB_MASK 0xfffffffc // GPIO
> > > control #define DM05_LNB_13V 0x3fffd // GPIO
> > > value #define DM05_LNB_18V 0x3fffc // GPIO
> > > value -*-*-*-*-*-*-*-*-*-*-*-*-
> > >
> > > BTW:
> > > Bit value 0 for GPIOCTL means output, 1 - input.
> > > Bit value for GPIOVAL - read/write.
> > > GPIO pins count is 18. Bits over 18 affect nothing.
> >
> > i will try to work out the correct values
> > when i have done so (or given up trying) i will let you know
> >
> > thank you very much for your help
> > --
> > simon
> > --
> > To unsubscribe from this list: send the line "unsubscribe linux-media" in
> > the body of a message to majordomo@vger.kernel.org
> > More majordomo info at http://vger.kernel.org/majordomo-info.html
>
> Patch against latest v4l-dvb.
> Please, test it.
Patch version 2
--
Igor M. Liplianin
Microsoft Windows Free Zone - Linux used for all Computing Tasks
[-- Attachment #2: 11879_1.patch --]
[-- Type: text/x-diff, Size: 5239 bytes --]
# HG changeset patch
# User Igor M. Liplianin <liplianin@me.by>
# Date 1243803828 -10800
# Node ID 48737beb9517dbc995ad3abe2e8852f21608a9ab
# Parent 25bc0580359a71b2661ef0ac30e229b83ce84162
Add support for yet another SDMC DM1105 based DVB-S card.
From: Igor M. Liplianin <liplianin@me.by>
Add support for SDMC DM1105 based DVB-S cards with PCI ID 195d:1105
Signed-off-by: Igor M. Liplianin <liplianin@me.by>
diff -r 25bc0580359a -r 48737beb9517 linux/drivers/media/dvb/dm1105/dm1105.c
--- a/linux/drivers/media/dvb/dm1105/dm1105.c Fri May 29 17:03:31 2009 -0300
+++ b/linux/drivers/media/dvb/dm1105/dm1105.c Mon Jun 01 00:03:48 2009 +0300
@@ -51,6 +51,9 @@
#ifndef PCI_VENDOR_ID_TRIGEM
#define PCI_VENDOR_ID_TRIGEM 0x109f
#endif
+#ifndef PCI_VENDOR_ID_AXESS
+#define PCI_VENDOR_ID_AXESS 0x195d
+#endif
#ifndef PCI_DEVICE_ID_DM1105
#define PCI_DEVICE_ID_DM1105 0x036f
#endif
@@ -60,6 +63,9 @@
#ifndef PCI_DEVICE_ID_DW2004
#define PCI_DEVICE_ID_DW2004 0x2004
#endif
+#ifndef PCI_DEVICE_ID_DM05
+#define PCI_DEVICE_ID_DM05 0x1105
+#endif
/* ----------------------------------------------- */
/* sdmc dm1105 registers */
@@ -150,6 +156,11 @@
#define DM1105_LNB_13V 0x00010100
#define DM1105_LNB_18V 0x00000100
+/* GPIO's for LNB power control for Axess DM05 */
+#define DM05_LNB_MASK 0x00000000
+#define DM05_LNB_13V 0x00020000
+#define DM05_LNB_18V 0x00030000
+
static int ir_debug;
module_param(ir_debug, int, 0644);
MODULE_PARM_DESC(ir_debug, "enable debugging information for IR decoding");
@@ -316,15 +327,25 @@
static int dm1105dvb_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage)
{
struct dm1105dvb *dm1105dvb = frontend_to_dm1105dvb(fe);
+ u32 lnb_mask, lnb_13v, lnb_18v;
- if (voltage == SEC_VOLTAGE_18) {
- outl(DM1105_LNB_MASK, dm_io_mem(DM1105_GPIOCTR));
- outl(DM1105_LNB_18V, dm_io_mem(DM1105_GPIOVAL));
- } else {
- /*LNB ON-13V by default!*/
- outl(DM1105_LNB_MASK, dm_io_mem(DM1105_GPIOCTR));
- outl(DM1105_LNB_13V, dm_io_mem(DM1105_GPIOVAL));
- }
+ switch (dm1105dvb->pdev->subsystem_device) {
+ case PCI_DEVICE_ID_DM05:
+ lnb_mask = DM05_LNB_MASK;
+ lnb_13v = DM05_LNB_13V;
+ lnb_18v = DM05_LNB_18V;
+ break;
+ default:
+ lnb_mask = DM1105_LNB_MASK;
+ lnb_13v = DM1105_LNB_13V;
+ lnb_18v = DM1105_LNB_18V;
+ }
+
+ outl(lnb_mask, dm_io_mem(DM1105_GPIOCTR));
+ if (voltage == SEC_VOLTAGE_18)
+ outl(lnb_18v , dm_io_mem(DM1105_GPIOVAL));
+ else
+ outl(lnb_13v, dm_io_mem(DM1105_GPIOVAL));
return 0;
}
@@ -599,46 +620,44 @@
int ret;
switch (dm1105dvb->pdev->subsystem_device) {
- case PCI_DEVICE_ID_DW2002:
- dm1105dvb->fe = dvb_attach(
- stv0299_attach, &sharp_z0194a_config,
- &dm1105dvb->i2c_adap);
-
- if (dm1105dvb->fe) {
- dm1105dvb->fe->ops.set_voltage =
- dm1105dvb_set_voltage;
- dvb_attach(dvb_pll_attach, dm1105dvb->fe, 0x60,
- &dm1105dvb->i2c_adap, DVB_PLL_OPERA1);
- }
-
- if (!dm1105dvb->fe) {
- dm1105dvb->fe = dvb_attach(
- stv0288_attach, &earda_config,
- &dm1105dvb->i2c_adap);
- if (dm1105dvb->fe) {
- dm1105dvb->fe->ops.set_voltage =
- dm1105dvb_set_voltage;
- dvb_attach(stb6000_attach, dm1105dvb->fe, 0x61,
- &dm1105dvb->i2c_adap);
- }
- }
-
- if (!dm1105dvb->fe) {
- dm1105dvb->fe = dvb_attach(
- si21xx_attach, &serit_config,
- &dm1105dvb->i2c_adap);
- if (dm1105dvb->fe)
- dm1105dvb->fe->ops.set_voltage =
- dm1105dvb_set_voltage;
- }
- break;
case PCI_DEVICE_ID_DW2004:
dm1105dvb->fe = dvb_attach(
cx24116_attach, &serit_sp2633_config,
&dm1105dvb->i2c_adap);
if (dm1105dvb->fe)
dm1105dvb->fe->ops.set_voltage = dm1105dvb_set_voltage;
+
break;
+ default:
+ dm1105dvb->fe = dvb_attach(
+ stv0299_attach, &sharp_z0194a_config,
+ &dm1105dvb->i2c_adap);
+ if (dm1105dvb->fe) {
+ dm1105dvb->fe->ops.set_voltage =
+ dm1105dvb_set_voltage;
+ dvb_attach(dvb_pll_attach, dm1105dvb->fe, 0x60,
+ &dm1105dvb->i2c_adap, DVB_PLL_OPERA1);
+ break;
+ }
+
+ dm1105dvb->fe = dvb_attach(
+ stv0288_attach, &earda_config,
+ &dm1105dvb->i2c_adap);
+ if (dm1105dvb->fe) {
+ dm1105dvb->fe->ops.set_voltage =
+ dm1105dvb_set_voltage;
+ dvb_attach(stb6000_attach, dm1105dvb->fe, 0x61,
+ &dm1105dvb->i2c_adap);
+ break;
+ }
+
+ dm1105dvb->fe = dvb_attach(
+ si21xx_attach, &serit_config,
+ &dm1105dvb->i2c_adap);
+ if (dm1105dvb->fe)
+ dm1105dvb->fe->ops.set_voltage =
+ dm1105dvb_set_voltage;
+
}
if (!dm1105dvb->fe) {
@@ -662,10 +681,17 @@
static u8 command[1] = { 0x28 };
struct i2c_msg msg[] = {
- { .addr = IIC_24C01_addr >> 1, .flags = 0,
- .buf = command, .len = 1 },
- { .addr = IIC_24C01_addr >> 1, .flags = I2C_M_RD,
- .buf = mac, .len = 6 },
+ {
+ .addr = IIC_24C01_addr >> 1,
+ .flags = 0,
+ .buf = command,
+ .len = 1
+ }, {
+ .addr = IIC_24C01_addr >> 1,
+ .flags = I2C_M_RD,
+ .buf = mac,
+ .len = 6
+ },
};
dm1105_i2c_xfer(&dm1105dvb->i2c_adap, msg , 2);
@@ -870,6 +896,11 @@
.subvendor = PCI_ANY_ID,
.subdevice = PCI_DEVICE_ID_DW2004,
}, {
+ .vendor = PCI_VENDOR_ID_AXESS,
+ .device = PCI_DEVICE_ID_DM05,
+ .subvendor = PCI_VENDOR_ID_AXESS,
+ .subdevice = PCI_DEVICE_ID_DM05,
+ }, {
/* empty */
},
};
next prev parent reply other threads:[~2009-05-31 22:01 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-04-03 4:56 [linux-dvb] SDMC DM1105N not being detected mp3geek
2009-04-03 5:02 ` mp3geek
2009-04-03 15:36 ` Igor M. Liplianin
2009-04-04 4:17 ` mp3geek
2009-05-20 13:44 ` [linux-dvb] " Simon Kenyon
2009-05-23 13:04 ` Igor M. Liplianin
2009-05-25 19:50 ` Simon Kenyon
2009-05-26 14:47 ` Igor M. Liplianin
2009-05-26 20:02 ` Simon Kenyon
[not found] ` <4A1FA9EC.4050405@koala.ie>
2009-05-30 9:44 ` [SOLVED] " Igor M. Liplianin
2009-05-30 16:54 ` Simon Kenyon
2009-05-30 17:15 ` Igor M. Liplianin
2009-05-30 17:00 ` Igor M. Liplianin
2009-05-31 22:01 ` Igor M. Liplianin [this message]
2009-06-01 10:04 ` Simon Kenyon
[not found] ` <4A295F87.50307@koala.ie>
[not found] ` <4A2966EA.8080406@koala.ie>
2009-06-06 8:57 ` Igor M. Liplianin
2009-06-06 20:37 ` Simon Kenyon
2009-06-12 9:05 ` Igor M. Liplianin
2009-06-14 22:49 ` Simon Kenyon
2009-06-15 0:24 ` Igor M. Liplianin
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=200906010101.01925.liplianin@me.by \
--to=liplianin@me.by \
--cc=linux-media@vger.kernel.org \
--cc=simon@koala.ie \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.