From: Tony Lindgren <tony@atomide.com> To: linux-arm-kernel@lists.infradead.org Cc: linux-omap@vger.kernel.org Subject: [PATCH 4/8] omap: mux: Add new style init functions to omap3 board-*.c files Date: Wed, 25 Nov 2009 16:19:29 -0800 [thread overview] Message-ID: <20091126001929.1546.39289.stgit@localhost> (raw) In-Reply-To: <20091126001646.1546.34352.stgit@localhost> Add new style mux init functions to omap3 board-*.c files So far Beagle has been confirmed to be a CBB package, and CM-T35 a CUS package. Signed-off-by: Tony Lindgren <tony@atomide.com> --- arch/arm/mach-omap2/board-3430sdp.c | 10 ++++++++++ arch/arm/mach-omap2/board-am3517evm.c | 11 +++++++++++ arch/arm/mach-omap2/board-cm-t35.c | 10 ++++++++++ arch/arm/mach-omap2/board-igep0020.c | 10 ++++++++++ arch/arm/mach-omap2/board-ldp.c | 10 ++++++++++ arch/arm/mach-omap2/board-omap3beagle.c | 10 ++++++++++ arch/arm/mach-omap2/board-omap3evm.c | 10 ++++++++++ arch/arm/mach-omap2/board-omap3pandora.c | 10 ++++++++++ arch/arm/mach-omap2/board-overo.c | 9 +++++++++ arch/arm/mach-omap2/board-rx51.c | 11 +++++++++++ arch/arm/mach-omap2/board-zoom2.c | 11 +++++++++++ 11 files changed, 112 insertions(+), 0 deletions(-) diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c index 491364e..d627471 100644 --- a/arch/arm/mach-omap2/board-3430sdp.c +++ b/arch/arm/mach-omap2/board-3430sdp.c @@ -41,6 +41,7 @@ #include <plat/control.h> #include <plat/gpmc-smc91x.h> +#include "mux.h" #include "sdram-qimonda-hyb18m512160af-6.h" #include "mmc-twl4030.h" @@ -506,8 +507,17 @@ static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { .reset_gpio_port[2] = -EINVAL }; +#ifdef CONFIG_OMAP_MUX +static struct omap_board_mux board_mux[] __initdata = { + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; +#else +#define board_mux NULL +#endif + static void __init omap_3430sdp_init(void) { + omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); omap3430_i2c_init(); platform_add_devices(sdp3430_devices, ARRAY_SIZE(sdp3430_devices)); if (omap_rev() > OMAP3430_REV_ES1_0) diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c index 415a13d..b4e6eca 100644 --- a/arch/arm/mach-omap2/board-am3517evm.c +++ b/arch/arm/mach-omap2/board-am3517evm.c @@ -30,6 +30,8 @@ #include <plat/common.h> #include <plat/usb.h> +#include "mux.h" + /* * Board initialization */ @@ -60,8 +62,17 @@ static struct ehci_hcd_omap_platform_data ehci_pdata __initdata = { .reset_gpio_port[2] = -EINVAL }; +#ifdef CONFIG_OMAP_MUX +static struct omap_board_mux board_mux[] __initdata = { + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; +#else +#define board_mux NULL +#endif + static void __init am3517_evm_init(void) { + omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); platform_add_devices(am3517_evm_devices, ARRAY_SIZE(am3517_evm_devices)); diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c index 22c4529..84321f6 100644 --- a/arch/arm/mach-omap2/board-cm-t35.c +++ b/arch/arm/mach-omap2/board-cm-t35.c @@ -45,6 +45,7 @@ #include <mach/hardware.h> +#include "mux.h" #include "sdram-micron-mt46h32m32lf-6.h" #include "mmc-twl4030.h" @@ -482,8 +483,17 @@ static void __init cm_t35_map_io(void) omap2_map_common_io(); } +#ifdef CONFIG_OMAP_MUX +static struct omap_board_mux board_mux[] __initdata = { + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; +#else +#define board_mux NULL +#endif + static void __init cm_t35_init(void) { + omap3_mux_init(board_mux, OMAP_PACKAGE_CUS); omap_serial_init(); cm_t35_init_i2c(); cm_t35_init_nand(); diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c index fa62e80..7e3217a 100644 --- a/arch/arm/mach-omap2/board-igep0020.c +++ b/arch/arm/mach-omap2/board-igep0020.c @@ -30,6 +30,7 @@ #include <plat/mux.h> #include <plat/usb.h> +#include "mux.h" #include "mmc-twl4030.h" #define IGEP2_SMSC911X_CS 5 @@ -203,8 +204,17 @@ static int __init igep2_i2c_init(void) return 0; } +#ifdef CONFIG_OMAP_MUX +static struct omap_board_mux board_mux[] __initdata = { + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; +#else +#define board_mux NULL +#endif + static void __init igep2_init(void) { + omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); igep2_i2c_init(); omap_serial_init(); usb_musb_init(); diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c index c062238..3743173 100644 --- a/arch/arm/mach-omap2/board-ldp.c +++ b/arch/arm/mach-omap2/board-ldp.c @@ -43,6 +43,7 @@ #include <plat/control.h> #include <plat/usb.h> +#include "mux.h" #include "mmc-twl4030.h" #define LDP_SMSC911X_CS 1 @@ -374,8 +375,17 @@ static struct platform_device *ldp_devices[] __initdata = { &ldp_gpio_keys_device, }; +#ifdef CONFIG_OMAP_MUX +static struct omap_board_mux board_mux[] __initdata = { + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; +#else +#define board_mux NULL +#endif + static void __init omap_ldp_init(void) { + omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); omap_i2c_init(); platform_add_devices(ldp_devices, ARRAY_SIZE(ldp_devices)); ts_gpio = 54; diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 41480bd..e669dbb 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -45,6 +45,7 @@ #include <plat/usb.h> #include <plat/timer-gp.h> +#include "mux.h" #include "mmc-twl4030.h" #define GPMC_CS0_BASE 0x60 @@ -422,8 +423,17 @@ static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { .reset_gpio_port[2] = -EINVAL }; +#ifdef CONFIG_OMAP_MUX +static struct omap_board_mux board_mux[] __initdata = { + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; +#else +#define board_mux NULL +#endif + static void __init omap3_beagle_init(void) { + omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); omap3_beagle_i2c_init(); platform_add_devices(omap3_beagle_devices, ARRAY_SIZE(omap3_beagle_devices)); diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index 5efc2e9..ad174ae 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -43,6 +43,7 @@ #include <plat/common.h> #include <plat/mcspi.h> +#include "mux.h" #include "sdram-micron-mt46h32m32lf-6.h" #include "mmc-twl4030.h" @@ -422,9 +423,18 @@ static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { .reset_gpio_port[2] = -EINVAL }; +#ifdef CONFIG_OMAP_MUX +static struct omap_board_mux board_mux[] __initdata = { + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; +#else +#define board_mux NULL +#endif + static void __init omap3_evm_init(void) { omap3_evm_get_revision(); + omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); omap3_evm_i2c_init(); diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c index 2db5ba5..9f59c03 100644 --- a/arch/arm/mach-omap2/board-omap3pandora.c +++ b/arch/arm/mach-omap2/board-omap3pandora.c @@ -42,6 +42,7 @@ #include <plat/usb.h> #include <plat/mux.h> +#include "mux.h" #include "sdram-micron-mt46h32m32lf-6.h" #include "mmc-twl4030.h" @@ -409,8 +410,17 @@ static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { .reset_gpio_port[2] = -EINVAL }; +#ifdef CONFIG_OMAP_MUX +static struct omap_board_mux board_mux[] __initdata = { + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; +#else +#define board_mux NULL +#endif + static void __init omap3pandora_init(void) { + omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); omap3pandora_i2c_init(); platform_add_devices(omap3pandora_devices, ARRAY_SIZE(omap3pandora_devices)); diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c index 52dfd51..40f3c85 100644 --- a/arch/arm/mach-omap2/board-overo.c +++ b/arch/arm/mach-omap2/board-overo.c @@ -47,6 +47,7 @@ #include <plat/mux.h> #include <plat/usb.h> +#include "mux.h" #include "sdram-micron-mt46h32m32lf-6.h" #include "mmc-twl4030.h" @@ -405,9 +406,17 @@ static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { .reset_gpio_port[2] = -EINVAL }; +#ifdef CONFIG_OMAP_MUX +static struct omap_board_mux board_mux[] __initdata = { + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; +#else +#define board_mux NULL +#endif static void __init overo_init(void) { + omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); overo_i2c_init(); platform_add_devices(overo_devices, ARRAY_SIZE(overo_devices)); omap_serial_init(); diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c index 1bb1de2..c0c99ad 100644 --- a/arch/arm/mach-omap2/board-rx51.c +++ b/arch/arm/mach-omap2/board-rx51.c @@ -30,6 +30,8 @@ #include <plat/gpmc.h> #include <plat/usb.h> +#include "mux.h" + struct omap_sdrc_params *rx51_get_sdram_timings(void); static struct omap_lcd_config rx51_lcd_config = { @@ -69,8 +71,17 @@ static void __init rx51_init_irq(void) extern void __init rx51_peripherals_init(void); +#ifdef CONFIG_OMAP_MUX +static struct omap_board_mux board_mux[] __initdata = { + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; +#else +#define board_mux NULL +#endif + static void __init rx51_init(void) { + omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); omap_serial_init(); usb_musb_init(); rx51_peripherals_init(); diff --git a/arch/arm/mach-omap2/board-zoom2.c b/arch/arm/mach-omap2/board-zoom2.c index 2f980e3..06b0787 100644 --- a/arch/arm/mach-omap2/board-zoom2.c +++ b/arch/arm/mach-omap2/board-zoom2.c @@ -23,6 +23,8 @@ #include <mach/board-zoom.h> +#include "mux.h" + #include "sdram-micron-mt46h32m32lf-6.h" static void __init omap_zoom2_init_irq(void) @@ -58,8 +60,17 @@ static struct twl4030_platform_data zoom2_twldata = { #endif +#ifdef CONFIG_OMAP_MUX +static struct omap_board_mux board_mux[] __initdata = { + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; +#else +#define board_mux NULL +#endif + static void __init omap_zoom2_init(void) { + omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); zoom_peripherals_init(); zoom_debugboard_init(); }
WARNING: multiple messages have this Message-ID (diff)
From: tony@atomide.com (Tony Lindgren) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH 4/8] omap: mux: Add new style init functions to omap3 board-*.c files Date: Wed, 25 Nov 2009 16:19:29 -0800 [thread overview] Message-ID: <20091126001929.1546.39289.stgit@localhost> (raw) In-Reply-To: <20091126001646.1546.34352.stgit@localhost> Add new style mux init functions to omap3 board-*.c files So far Beagle has been confirmed to be a CBB package, and CM-T35 a CUS package. Signed-off-by: Tony Lindgren <tony@atomide.com> --- arch/arm/mach-omap2/board-3430sdp.c | 10 ++++++++++ arch/arm/mach-omap2/board-am3517evm.c | 11 +++++++++++ arch/arm/mach-omap2/board-cm-t35.c | 10 ++++++++++ arch/arm/mach-omap2/board-igep0020.c | 10 ++++++++++ arch/arm/mach-omap2/board-ldp.c | 10 ++++++++++ arch/arm/mach-omap2/board-omap3beagle.c | 10 ++++++++++ arch/arm/mach-omap2/board-omap3evm.c | 10 ++++++++++ arch/arm/mach-omap2/board-omap3pandora.c | 10 ++++++++++ arch/arm/mach-omap2/board-overo.c | 9 +++++++++ arch/arm/mach-omap2/board-rx51.c | 11 +++++++++++ arch/arm/mach-omap2/board-zoom2.c | 11 +++++++++++ 11 files changed, 112 insertions(+), 0 deletions(-) diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c index 491364e..d627471 100644 --- a/arch/arm/mach-omap2/board-3430sdp.c +++ b/arch/arm/mach-omap2/board-3430sdp.c @@ -41,6 +41,7 @@ #include <plat/control.h> #include <plat/gpmc-smc91x.h> +#include "mux.h" #include "sdram-qimonda-hyb18m512160af-6.h" #include "mmc-twl4030.h" @@ -506,8 +507,17 @@ static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { .reset_gpio_port[2] = -EINVAL }; +#ifdef CONFIG_OMAP_MUX +static struct omap_board_mux board_mux[] __initdata = { + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; +#else +#define board_mux NULL +#endif + static void __init omap_3430sdp_init(void) { + omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); omap3430_i2c_init(); platform_add_devices(sdp3430_devices, ARRAY_SIZE(sdp3430_devices)); if (omap_rev() > OMAP3430_REV_ES1_0) diff --git a/arch/arm/mach-omap2/board-am3517evm.c b/arch/arm/mach-omap2/board-am3517evm.c index 415a13d..b4e6eca 100644 --- a/arch/arm/mach-omap2/board-am3517evm.c +++ b/arch/arm/mach-omap2/board-am3517evm.c @@ -30,6 +30,8 @@ #include <plat/common.h> #include <plat/usb.h> +#include "mux.h" + /* * Board initialization */ @@ -60,8 +62,17 @@ static struct ehci_hcd_omap_platform_data ehci_pdata __initdata = { .reset_gpio_port[2] = -EINVAL }; +#ifdef CONFIG_OMAP_MUX +static struct omap_board_mux board_mux[] __initdata = { + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; +#else +#define board_mux NULL +#endif + static void __init am3517_evm_init(void) { + omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); platform_add_devices(am3517_evm_devices, ARRAY_SIZE(am3517_evm_devices)); diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c index 22c4529..84321f6 100644 --- a/arch/arm/mach-omap2/board-cm-t35.c +++ b/arch/arm/mach-omap2/board-cm-t35.c @@ -45,6 +45,7 @@ #include <mach/hardware.h> +#include "mux.h" #include "sdram-micron-mt46h32m32lf-6.h" #include "mmc-twl4030.h" @@ -482,8 +483,17 @@ static void __init cm_t35_map_io(void) omap2_map_common_io(); } +#ifdef CONFIG_OMAP_MUX +static struct omap_board_mux board_mux[] __initdata = { + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; +#else +#define board_mux NULL +#endif + static void __init cm_t35_init(void) { + omap3_mux_init(board_mux, OMAP_PACKAGE_CUS); omap_serial_init(); cm_t35_init_i2c(); cm_t35_init_nand(); diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c index fa62e80..7e3217a 100644 --- a/arch/arm/mach-omap2/board-igep0020.c +++ b/arch/arm/mach-omap2/board-igep0020.c @@ -30,6 +30,7 @@ #include <plat/mux.h> #include <plat/usb.h> +#include "mux.h" #include "mmc-twl4030.h" #define IGEP2_SMSC911X_CS 5 @@ -203,8 +204,17 @@ static int __init igep2_i2c_init(void) return 0; } +#ifdef CONFIG_OMAP_MUX +static struct omap_board_mux board_mux[] __initdata = { + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; +#else +#define board_mux NULL +#endif + static void __init igep2_init(void) { + omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); igep2_i2c_init(); omap_serial_init(); usb_musb_init(); diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c index c062238..3743173 100644 --- a/arch/arm/mach-omap2/board-ldp.c +++ b/arch/arm/mach-omap2/board-ldp.c @@ -43,6 +43,7 @@ #include <plat/control.h> #include <plat/usb.h> +#include "mux.h" #include "mmc-twl4030.h" #define LDP_SMSC911X_CS 1 @@ -374,8 +375,17 @@ static struct platform_device *ldp_devices[] __initdata = { &ldp_gpio_keys_device, }; +#ifdef CONFIG_OMAP_MUX +static struct omap_board_mux board_mux[] __initdata = { + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; +#else +#define board_mux NULL +#endif + static void __init omap_ldp_init(void) { + omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); omap_i2c_init(); platform_add_devices(ldp_devices, ARRAY_SIZE(ldp_devices)); ts_gpio = 54; diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 41480bd..e669dbb 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -45,6 +45,7 @@ #include <plat/usb.h> #include <plat/timer-gp.h> +#include "mux.h" #include "mmc-twl4030.h" #define GPMC_CS0_BASE 0x60 @@ -422,8 +423,17 @@ static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { .reset_gpio_port[2] = -EINVAL }; +#ifdef CONFIG_OMAP_MUX +static struct omap_board_mux board_mux[] __initdata = { + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; +#else +#define board_mux NULL +#endif + static void __init omap3_beagle_init(void) { + omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); omap3_beagle_i2c_init(); platform_add_devices(omap3_beagle_devices, ARRAY_SIZE(omap3_beagle_devices)); diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index 5efc2e9..ad174ae 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -43,6 +43,7 @@ #include <plat/common.h> #include <plat/mcspi.h> +#include "mux.h" #include "sdram-micron-mt46h32m32lf-6.h" #include "mmc-twl4030.h" @@ -422,9 +423,18 @@ static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { .reset_gpio_port[2] = -EINVAL }; +#ifdef CONFIG_OMAP_MUX +static struct omap_board_mux board_mux[] __initdata = { + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; +#else +#define board_mux NULL +#endif + static void __init omap3_evm_init(void) { omap3_evm_get_revision(); + omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); omap3_evm_i2c_init(); diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c index 2db5ba5..9f59c03 100644 --- a/arch/arm/mach-omap2/board-omap3pandora.c +++ b/arch/arm/mach-omap2/board-omap3pandora.c @@ -42,6 +42,7 @@ #include <plat/usb.h> #include <plat/mux.h> +#include "mux.h" #include "sdram-micron-mt46h32m32lf-6.h" #include "mmc-twl4030.h" @@ -409,8 +410,17 @@ static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { .reset_gpio_port[2] = -EINVAL }; +#ifdef CONFIG_OMAP_MUX +static struct omap_board_mux board_mux[] __initdata = { + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; +#else +#define board_mux NULL +#endif + static void __init omap3pandora_init(void) { + omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); omap3pandora_i2c_init(); platform_add_devices(omap3pandora_devices, ARRAY_SIZE(omap3pandora_devices)); diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c index 52dfd51..40f3c85 100644 --- a/arch/arm/mach-omap2/board-overo.c +++ b/arch/arm/mach-omap2/board-overo.c @@ -47,6 +47,7 @@ #include <plat/mux.h> #include <plat/usb.h> +#include "mux.h" #include "sdram-micron-mt46h32m32lf-6.h" #include "mmc-twl4030.h" @@ -405,9 +406,17 @@ static struct ehci_hcd_omap_platform_data ehci_pdata __initconst = { .reset_gpio_port[2] = -EINVAL }; +#ifdef CONFIG_OMAP_MUX +static struct omap_board_mux board_mux[] __initdata = { + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; +#else +#define board_mux NULL +#endif static void __init overo_init(void) { + omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); overo_i2c_init(); platform_add_devices(overo_devices, ARRAY_SIZE(overo_devices)); omap_serial_init(); diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c index 1bb1de2..c0c99ad 100644 --- a/arch/arm/mach-omap2/board-rx51.c +++ b/arch/arm/mach-omap2/board-rx51.c @@ -30,6 +30,8 @@ #include <plat/gpmc.h> #include <plat/usb.h> +#include "mux.h" + struct omap_sdrc_params *rx51_get_sdram_timings(void); static struct omap_lcd_config rx51_lcd_config = { @@ -69,8 +71,17 @@ static void __init rx51_init_irq(void) extern void __init rx51_peripherals_init(void); +#ifdef CONFIG_OMAP_MUX +static struct omap_board_mux board_mux[] __initdata = { + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; +#else +#define board_mux NULL +#endif + static void __init rx51_init(void) { + omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); omap_serial_init(); usb_musb_init(); rx51_peripherals_init(); diff --git a/arch/arm/mach-omap2/board-zoom2.c b/arch/arm/mach-omap2/board-zoom2.c index 2f980e3..06b0787 100644 --- a/arch/arm/mach-omap2/board-zoom2.c +++ b/arch/arm/mach-omap2/board-zoom2.c @@ -23,6 +23,8 @@ #include <mach/board-zoom.h> +#include "mux.h" + #include "sdram-micron-mt46h32m32lf-6.h" static void __init omap_zoom2_init_irq(void) @@ -58,8 +60,17 @@ static struct twl4030_platform_data zoom2_twldata = { #endif +#ifdef CONFIG_OMAP_MUX +static struct omap_board_mux board_mux[] __initdata = { + { .reg_offset = OMAP_MUX_TERMINATOR }, +}; +#else +#define board_mux NULL +#endif + static void __init omap_zoom2_init(void) { + omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); zoom_peripherals_init(); zoom_debugboard_init(); }
next prev parent reply other threads:[~2009-11-26 0:19 UTC|newest] Thread overview: 38+ messages / expand[flat|nested] mbox.gz Atom feed top 2009-11-26 0:18 [PATCH 0/8] Series short description Tony Lindgren 2009-11-26 0:18 ` Tony Lindgren 2009-11-26 0:18 ` [PATCH 1/8] omap2: mux: intoduce omap_mux_{read,write} Tony Lindgren 2009-11-26 0:18 ` Tony Lindgren 2009-11-29 10:03 ` Shilimkar, Santosh 2009-11-29 10:03 ` Shilimkar, Santosh 2009-11-30 18:54 ` Tony Lindgren 2009-11-30 18:54 ` Tony Lindgren 2009-11-26 0:19 ` [PATCH 2/8] omap: mux: Add new style pin multiplexing code for omap3 Tony Lindgren 2009-11-26 0:19 ` Tony Lindgren 2009-11-26 0:19 ` [PATCH 3/8] omap: mux: Add new style pin multiplexing data for 34xx Tony Lindgren 2009-11-26 0:19 ` Tony Lindgren 2009-11-26 0:19 ` Tony Lindgren [this message] 2009-11-26 0:19 ` [PATCH 4/8] omap: mux: Add new style init functions to omap3 board-*.c files Tony Lindgren 2009-11-26 0:19 ` [PATCH 5/8] omap: mux: Add debugfs support for new mux code Tony Lindgren 2009-11-26 0:19 ` Tony Lindgren 2009-11-26 0:19 ` [PATCH 6/8] omap: Split i2c platform init for mach-omap1 and mach-omap2 Tony Lindgren 2009-11-26 0:19 ` Tony Lindgren 2009-11-27 17:44 ` Tony Lindgren 2009-11-27 17:44 ` Tony Lindgren 2009-11-26 0:20 ` [PATCH 7/8] omap: mux: Replace omap_cfg_reg() with new style signal or gpio functions Tony Lindgren 2009-11-26 0:20 ` Tony Lindgren 2009-11-26 0:20 ` [PATCH 8/8] omap: mux: Remove old mux code for 34xx Tony Lindgren 2009-11-26 0:20 ` Tony Lindgren 2009-11-26 0:20 ` [PATCH 0/8] Omap mux changes for v2.6.33 merge window (Series short description) Tony Lindgren 2009-11-26 0:20 ` Tony Lindgren 2009-11-26 11:20 ` Mike Rapoport 2009-11-26 11:20 ` Mike Rapoport 2009-11-26 18:15 ` Tony Lindgren 2009-11-26 18:15 ` Tony Lindgren 2009-11-27 16:16 ` Tony Lindgren 2009-11-27 16:16 ` Tony Lindgren 2009-11-26 6:44 ` [PATCH 0/8] Series short description Hemanth V 2009-11-26 6:44 ` Hemanth V 2009-11-26 8:27 ` Tony Lindgren 2009-11-26 8:27 ` Tony Lindgren 2009-11-29 10:03 ` Shilimkar, Santosh 2009-11-29 10:03 ` Shilimkar, Santosh
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20091126001929.1546.39289.stgit@localhost \ --to=tony@atomide.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-omap@vger.kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.