All of lore.kernel.org
 help / color / mirror / Atom feed
From: Felipe Balbi <felipe.balbi@nokia.com>
To: "Balbi Felipe (Nokia-D/Helsinki)" <felipe.balbi@nokia.com>
Cc: David Brownell <david-b@pacbell.net>,
	Tony Lindgren <tony@atomide.com>,
	Linux OMAP Mailing List <linux-omap@vger.kernel.org>
Subject: Re: [RFC/PATCH 2/4] arm: omap: gpio: implement set_debounce method
Date: Wed, 31 Mar 2010 15:56:20 +0300	[thread overview]
Message-ID: <20100331125620.GA16297@nokia.com> (raw)
In-Reply-To: <1270038435-28106-3-git-send-email-felipe.balbi@nokia.com>

[-- Attachment #1: Type: text/plain, Size: 283 bytes --]

On Wed, Mar 31, 2010 at 02:27:13PM +0200, Balbi Felipe (Nokia-D/Helsinki) wrote:
>OMAP support debouncing of gpio lines, implement
>the method using gpiolib.
>
>Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>

this one was missing dbck handling. New version attached

-- 
balbi

[-- Attachment #2: 0002-arm-omap-gpio-implement-set_debounce-method.diff --]
[-- Type: text/x-diff, Size: 2439 bytes --]

>From e37f49e1006abde377cf56604077fb20340cca0a Mon Sep 17 00:00:00 2001
From: Felipe Balbi <felipe.balbi@nokia.com>
Date: Wed, 31 Mar 2010 15:17:29 +0300
Subject: [RFC/PATCH 2/4] arm: omap: gpio: implement set_debounce method

OMAP support debouncing of gpio lines, implement
the method using gpiolib.

Signed-off-by: Felipe Balbi <felipe.balbi@nokia.com>
---
 arch/arm/plat-omap/gpio.c |   51 +++++++++++++++++++++++++++++++++++++++++++++
 1 files changed, 51 insertions(+), 0 deletions(-)

diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index 76a347b..9df434e 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -612,6 +612,43 @@ do {	\
 	__raw_writel(l, base + reg); \
 } while(0)
 
+static void _set_gpio_debounce(struct gpio_bank *bank, unsigned gpio, int value)
+{
+	void __iomem		*reg = bank->base;
+	u32			val;
+	u32			l;
+
+	value &= 0xff;
+	l = 1 << get_gpio_index(gpio);
+
+	if (cpu_is_omap44xx())
+		reg += OMAP4_GPIO_DEBOUNCINGTIME;
+	else
+		reg += OMAP24XX_GPIO_DEBOUNCE_VAL;
+
+	__raw_writel(value, reg);
+
+	reg = bank->base;
+	if (cpu_is_omap44xx())
+		reg += OMAP4_GPIO_DEBOUNCENABLE;
+	else
+		reg += OMAP24XX_GPIO_DEBOUNCE_EN;
+
+	val = __raw_readl(reg);
+
+	if (value) {
+		val |= l;
+		if (cpu_is_omap34xx() || cpu_is_omap44xx())
+			clk_enable(bank->dbck);
+	} else {
+		val &= ~l;
+		if (cpu_is_omap34xx() || cpu_is_omap44xx())
+			clk_disable(bank->dbck);
+	}
+
+	__raw_writel(val, reg);
+}
+
 void omap_set_gpio_debounce(int gpio, int enable)
 {
 	struct gpio_bank *bank;
@@ -1608,6 +1645,19 @@ static int gpio_output(struct gpio_chip *chip, unsigned offset, int value)
 	return 0;
 }
 
+static int gpio_debounce(struct gpio_chip *chip, unsigned offset, int value)
+{
+	struct gpio_bank *bank;
+	unsigned long flags;
+
+	bank = container_of(chip, struct gpio_bank, chip);
+	spin_lock_irqsave(&bank->lock, flags);
+	_set_gpio_debounce(bank, offset, value);
+	spin_unlock_irqrestore(&bank->lock, flags);
+
+	return 0;
+}
+
 static void gpio_set(struct gpio_chip *chip, unsigned offset, int value)
 {
 	struct gpio_bank *bank;
@@ -1860,6 +1910,7 @@ static int __init _omap_gpio_init(void)
 		bank->chip.direction_input = gpio_input;
 		bank->chip.get = gpio_get;
 		bank->chip.direction_output = gpio_output;
+		bank->chip.set_debounce = gpio_debounce;
 		bank->chip.set = gpio_set;
 		bank->chip.to_irq = gpio_2irq;
 		if (bank_is_mpuio(bank)) {
-- 
1.7.0.rc0.33.g7c3932


  reply	other threads:[~2010-03-31 12:57 UTC|newest]

Thread overview: 33+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2010-03-31 12:27 [RFC/PATCH 0/4] teach gpiolib about gpio debouncing Felipe Balbi
2010-03-31 12:27 ` [RFC/PATCH 1/4] gpiolib: introduce set_debounce method Felipe Balbi
2010-03-31 13:46   ` Mark Brown
2010-03-31 14:50     ` Felipe Balbi
2010-03-31 14:59       ` Felipe Balbi
2010-03-31 15:04         ` Mark Brown
2010-03-31 15:06           ` Felipe Balbi
2010-03-31 15:11             ` Mark Brown
2010-03-31 15:11               ` Felipe Balbi
2010-03-31 12:27 ` [RFC/PATCH 2/4] arm: omap: gpio: implement " Felipe Balbi
2010-03-31 12:56   ` Felipe Balbi [this message]
2010-03-31 12:27 ` [RFC/PATCH 3/4] arm: omap: switch over to gpio_set_debounce Felipe Balbi
2010-03-31 12:27 ` [RFC/PATCH 4/4] arm: omap: remove the unused omap_gpio_set_debounce methods Felipe Balbi
2010-03-31 15:35 ` [RFC/PATCHv2 0/4] teach gpiolib about debouncing Felipe Balbi
2010-03-31 15:35 ` [RFC/PATCHv2 1/4] gpiolib: introduce set_debounce method Felipe Balbi
2010-04-02 12:34   ` Mark Brown
2010-05-04 22:40     ` Tony Lindgren
2010-05-05 18:37       ` Felipe Balbi
2010-03-31 15:35 ` [RFC/PATCHv2 2/4] arm: omap: gpio: implement " Felipe Balbi
2010-03-31 16:21   ` Mark Brown
2010-03-31 16:29     ` Felipe Balbi
2010-04-01  5:39       ` Felipe Balbi
2010-04-01  9:29   ` Grazvydas Ignotas
2010-04-01  9:32     ` Felipe Balbi
2010-04-01  9:37       ` Grazvydas Ignotas
2010-04-01 10:10         ` Felipe Balbi
2010-04-01 11:20           ` Grazvydas Ignotas
2010-04-01 13:11       ` Jani Nikula
2010-04-01 16:42         ` Felipe Balbi
2010-04-01 18:15           ` Mark Brown
2010-04-01 18:19             ` Felipe Balbi
2010-03-31 15:35 ` [RFC/PATCHv2 3/4] arm: omap: switch over to gpio_set_debounce Felipe Balbi
2010-03-31 15:35 ` [RFC/PATCHv2 4/4] arm: omap: remove the unused omap_gpio_set_debounce methods Felipe Balbi

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20100331125620.GA16297@nokia.com \
    --to=felipe.balbi@nokia.com \
    --cc=david-b@pacbell.net \
    --cc=linux-omap@vger.kernel.org \
    --cc=tony@atomide.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.