From: Alexey Starikovskiy <astarikovskiy@suse.de>
To: Robert Moore <robert.moore@intel.com>, Len Brown <lenb@kernel.org>
Cc: Linux-acpi@vger.kernel.org
Subject: [PATCH] ACPICA: Handle large field apertures.
Date: Tue, 25 May 2010 14:59:10 +0400 [thread overview]
Message-ID: <20100525105910.2629.76253.stgit@thinkpad> (raw)
In-Reply-To: <4911F71203A09E4D9981D27F9D830858709F2D04@orsmsx503.amr.corp.intel.com>
Allow field reads of more than 64 bits if the field is properly aligned.
EC driver will be able to read in bursts of up to 32 bytes with this patch.
Signed-off-by: Alexey Starikovskiy <astarikovskiy@suse.de>
---
source/components/executer/exfldio.c | 67 ++++++++++++++++++++++------------
source/components/executer/exprep.c | 12 +++++-
source/include/acobject.h | 3 +-
3 files changed, 54 insertions(+), 28 deletions(-)
diff --git a/source/components/executer/exfldio.c b/source/components/executer/exfldio.c
index 3276bc4..2e70763 100644
--- a/source/components/executer/exfldio.c
+++ b/source/components/executer/exfldio.c
@@ -233,9 +233,8 @@ AcpiExSetupRegion (
* (Region length is specified in bytes)
*/
if (RgnDesc->Region.Length <
- (ObjDesc->CommonField.BaseByteOffset +
- FieldDatumByteOffset +
- ObjDesc->CommonField.AccessByteWidth))
+ (ObjDesc->CommonField.BaseByteOffset + FieldDatumByteOffset +
+ ObjDesc->CommonField.AccessByteWidth))
{
if (AcpiGbl_EnableInterpreterSlack)
{
@@ -795,6 +794,7 @@ AcpiExExtractFromField (
UINT32 DatumCount;
UINT32 FieldDatumCount;
UINT32 i;
+ UINT32 AccessBitWidth;
ACPI_FUNCTION_TRACE (ExExtractFromField);
@@ -802,8 +802,7 @@ AcpiExExtractFromField (
/* Validate target buffer and clear it */
- if (BufferLength <
- ACPI_ROUND_BITS_UP_TO_BYTES (ObjDesc->CommonField.BitLength))
+ if (BufferLength < ACPI_ROUND_BITS_UP_TO_BYTES (ObjDesc->CommonField.BitLength))
{
ACPI_ERROR ((AE_INFO,
"Field size %u (bits) is too large for buffer (%u)",
@@ -813,15 +812,30 @@ AcpiExExtractFromField (
}
ACPI_MEMSET (Buffer, 0, BufferLength);
+ /* Simple case handling */
+ AccessBitWidth = ACPI_MUL_8(ObjDesc->CommonField.AccessByteWidth);
+ if (ObjDesc->CommonField.StartFieldBitOffset == 0 &&
+ ObjDesc->CommonField.BitLength == AccessBitWidth)
+ {
+ Status = AcpiExFieldDatumIo (ObjDesc, 0, Buffer, ACPI_READ);
+ return_ACPI_STATUS(Status);
+ }
+
+ /* Algo is limited to sizeof(UINT64), so cut the AccessByteWidth */
+ if (ObjDesc->CommonField.AccessByteWidth > sizeof(UINT64))
+ {
+ ObjDesc->CommonField.AccessByteWidth = sizeof(UINT64);
+ AccessBitWidth = ACPI_MUL_8(ObjDesc->CommonField.AccessByteWidth);
+ }
+
/* Compute the number of datums (access width data items) */
DatumCount = ACPI_ROUND_UP_TO (
- ObjDesc->CommonField.BitLength,
- ObjDesc->CommonField.AccessBitWidth);
+ ObjDesc->CommonField.BitLength, AccessBitWidth);
FieldDatumCount = ACPI_ROUND_UP_TO (
ObjDesc->CommonField.BitLength +
ObjDesc->CommonField.StartFieldBitOffset,
- ObjDesc->CommonField.AccessBitWidth);
+ AccessBitWidth);
/* Priming read from the field */
@@ -854,12 +868,11 @@ AcpiExExtractFromField (
* This avoids the differences in behavior between different compilers
* concerning shift values larger than the target data width.
*/
- if ((ObjDesc->CommonField.AccessBitWidth -
- ObjDesc->CommonField.StartFieldBitOffset) < ACPI_INTEGER_BIT_SIZE)
+ if (AccessBitWidth - ObjDesc->CommonField.StartFieldBitOffset <
+ ACPI_INTEGER_BIT_SIZE)
{
MergedDatum |= RawDatum <<
- (ObjDesc->CommonField.AccessBitWidth -
- ObjDesc->CommonField.StartFieldBitOffset);
+ (AccessBitWidth - ObjDesc->CommonField.StartFieldBitOffset);
}
if (i == DatumCount)
@@ -879,8 +892,7 @@ AcpiExExtractFromField (
/* Mask off any extra bits in the last datum */
- BufferTailBits = ObjDesc->CommonField.BitLength %
- ObjDesc->CommonField.AccessBitWidth;
+ BufferTailBits = ObjDesc->CommonField.BitLength % AccessBitWidth;
if (BufferTailBits)
{
MergedDatum &= ACPI_MASK_BITS_ABOVE (BufferTailBits);
@@ -928,6 +940,7 @@ AcpiExInsertIntoField (
UINT32 FieldDatumCount;
UINT32 i;
UINT32 RequiredLength;
+ UINT32 AccessBitWidth;
void *NewBuffer;
@@ -965,18 +978,26 @@ AcpiExInsertIntoField (
BufferLength = RequiredLength;
}
+ /* Algo is limited to sizeof(UINT64), so cut the AccessByteWidth */
+ if (ObjDesc->CommonField.AccessByteWidth > sizeof(UINT64))
+ {
+ ObjDesc->CommonField.AccessByteWidth = sizeof(UINT64);
+ }
+
+ AccessBitWidth = ACPI_MUL_8(ObjDesc->CommonField.AccessByteWidth);
+
/*
* Create the bitmasks used for bit insertion.
* Note: This if/else is used to bypass compiler differences with the
* shift operator
*/
- if (ObjDesc->CommonField.AccessBitWidth == ACPI_INTEGER_BIT_SIZE)
+ if (AccessBitWidth == ACPI_INTEGER_BIT_SIZE)
{
WidthMask = ACPI_UINT64_MAX;
}
else
{
- WidthMask = ACPI_MASK_BITS_ABOVE (ObjDesc->CommonField.AccessBitWidth);
+ WidthMask = ACPI_MASK_BITS_ABOVE (AccessBitWidth);
}
Mask = WidthMask &
@@ -985,11 +1006,11 @@ AcpiExInsertIntoField (
/* Compute the number of datums (access width data items) */
DatumCount = ACPI_ROUND_UP_TO (ObjDesc->CommonField.BitLength,
- ObjDesc->CommonField.AccessBitWidth);
+ AccessBitWidth);
FieldDatumCount = ACPI_ROUND_UP_TO (ObjDesc->CommonField.BitLength +
ObjDesc->CommonField.StartFieldBitOffset,
- ObjDesc->CommonField.AccessBitWidth);
+ AccessBitWidth);
/* Get initial Datum from the input buffer */
@@ -1024,12 +1045,11 @@ AcpiExInsertIntoField (
* This avoids the differences in behavior between different compilers
* concerning shift values larger than the target data width.
*/
- if ((ObjDesc->CommonField.AccessBitWidth -
- ObjDesc->CommonField.StartFieldBitOffset) < ACPI_INTEGER_BIT_SIZE)
+ if (AccessBitWidth - ObjDesc->CommonField.StartFieldBitOffset <
+ ACPI_INTEGER_BIT_SIZE)
{
MergedDatum = RawDatum >>
- (ObjDesc->CommonField.AccessBitWidth -
- ObjDesc->CommonField.StartFieldBitOffset);
+ (AccessBitWidth - ObjDesc->CommonField.StartFieldBitOffset);
}
else
{
@@ -1055,8 +1075,7 @@ AcpiExInsertIntoField (
/* Mask off any extra bits in the last datum */
BufferTailBits = (ObjDesc->CommonField.BitLength +
- ObjDesc->CommonField.StartFieldBitOffset) %
- ObjDesc->CommonField.AccessBitWidth;
+ ObjDesc->CommonField.StartFieldBitOffset) % AccessBitWidth;
if (BufferTailBits)
{
Mask &= ACPI_MASK_BITS_ABOVE (BufferTailBits);
diff --git a/source/components/executer/exprep.c b/source/components/executer/exprep.c
index 0709676..95fa502 100644
--- a/source/components/executer/exprep.c
+++ b/source/components/executer/exprep.c
@@ -455,8 +455,6 @@ AcpiExPrepCommonFieldObject (
ObjDesc->CommonField.AccessByteWidth = (UINT8)
ACPI_DIV_8 (AccessBitWidth); /* 1, 2, 4, 8 */
- ObjDesc->CommonField.AccessBitWidth = (UINT8) AccessBitWidth;
-
/*
* BaseByteOffset is the address of the start of the field within the
* region. It is the byte address of the first *datum* (field-width data
@@ -567,6 +565,16 @@ AcpiExPrepFieldValue (
ObjDesc->Field.RegionObj = AcpiNsGetAttachedObject (Info->RegionNode);
+ /* allow full data read from EC address space */
+ if (ObjDesc->Field.RegionObj->Region.SpaceId == ACPI_ADR_SPACE_EC) {
+ if (ObjDesc->CommonField.BitLength > 8) {
+ ObjDesc->CommonField.AccessByteWidth =
+ ACPI_ROUND_BITS_UP_TO_BYTES(ObjDesc->CommonField.BitLength);
+ }
+ }
+
+
+
/* An additional reference for the container */
AcpiUtAddReference (ObjDesc->Field.RegionObj);
diff --git a/source/include/acobject.h b/source/include/acobject.h
index cb6e199..e9c3d0a 100644
--- a/source/include/acobject.h
+++ b/source/include/acobject.h
@@ -381,12 +381,11 @@ typedef struct acpi_object_thermal_zone
UINT8 FieldFlags; /* Access, update, and lock bits */\
UINT8 Attribute; /* From AccessAs keyword */\
UINT8 AccessByteWidth; /* Read/Write size in bytes */\
+ UINT8 StartFieldBitOffset;/* Bit offset within first field datum (0-63) */\
ACPI_NAMESPACE_NODE *Node; /* Link back to parent node */\
UINT32 BitLength; /* Length of field in bits */\
UINT32 BaseByteOffset; /* Byte offset within containing object */\
UINT32 Value; /* Value to store into the Bank or Index register */\
- UINT8 StartFieldBitOffset;/* Bit offset within first field datum (0-63) */\
- UINT8 AccessBitWidth; /* Read/Write size in bits (8-64) */
typedef struct acpi_object_field_common /* COMMON FIELD (for BUFFER, REGION, BANK, and INDEX fields) */
next prev parent reply other threads:[~2010-05-25 10:59 UTC|newest]
Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <4911F71203A09E4D9981D27F9D830858709F2D04@orsmsx503.amr.corp.intel.com>
2010-05-25 10:56 ` [PATCH] ACPICA: Handle large field appertures Alexey Starikovskiy
2010-05-25 10:59 ` Alexey Starikovskiy [this message]
2010-05-25 16:16 ` [PATCH] ACPICA: Handle large field apertures Len Brown
2010-05-26 2:39 ` Lin Ming
2010-05-26 2:49 ` Lin Ming
2010-05-26 7:30 ` Alexey Starikovskiy
2010-05-26 7:31 ` Lin Ming
2010-05-26 17:51 ` Moore, Robert
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20100525105910.2629.76253.stgit@thinkpad \
--to=astarikovskiy@suse.de \
--cc=Linux-acpi@vger.kernel.org \
--cc=lenb@kernel.org \
--cc=robert.moore@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.