From: Dan Carpenter <error27@gmail.com>
To: Greg Kroah-Hartman <gregkh@suse.de>
Cc: Henrik Rydberg <rydberg@euromail.se>,
Naveen Kumar Gaddipati <naveen.gaddipati@stericsson.com>,
Linus Walleij <linus.walleij@stericsson.com>,
devel@driverdev.osuosl.org, linux-input@vger.kernel.org,
kernel-janitors@vger.kernel.org
Subject: [patch -next] Staging: ste_rmi4: use after
Date: Wed, 22 Dec 2010 21:07:33 +0000 [thread overview]
Message-ID: <20101222210733.GJ1936@bicker> (raw)
The original code called input_free_device(rmi4_data->input_dev) after
input_unregister_device(rmi4_data->input_dev) and that's a double free.
This is described in the comments to input_unregister_device().
The normal way to handle this is to make input_register_device() the
last function in the probe which can fail. That way you can avoid the
call to input_unregister_device() entirely.
Signed-off-by: Dan Carpenter <error27@gmail.com>
diff --git a/drivers/staging/ste_rmi4/synaptics_i2c_rmi4.c b/drivers/staging/ste_rmi4/synaptics_i2c_rmi4.c
index e8f047e..80183a7 100644
--- a/drivers/staging/ste_rmi4/synaptics_i2c_rmi4.c
+++ b/drivers/staging/ste_rmi4/synaptics_i2c_rmi4.c
@@ -986,12 +986,6 @@ static int __devinit synaptics_rmi4_probe
input_set_abs_params(rmi4_data->input_dev, ABS_MT_TOUCH_MAJOR, 0,
MAX_TOUCH_MAJOR, 0, 0);
- retval = input_register_device(rmi4_data->input_dev);
- if (retval) {
- dev_err(&client->dev, "%s:input register failed\n", __func__);
- goto err_input_register;
- }
-
/* Clear interrupts */
synaptics_rmi4_i2c_block_read(rmi4_data,
rmi4_data->fn01_data_base_addr + 1, intr_status,
@@ -1003,15 +997,20 @@ static int __devinit synaptics_rmi4_probe
if (retval) {
dev_err(&client->dev, "%s:Unable to get attn irq %d\n",
__func__, platformdata->irq_number);
- goto err_request_irq;
+ goto err_unset_clientdata;
+ }
+
+ retval = input_register_device(rmi4_data->input_dev);
+ if (retval) {
+ dev_err(&client->dev, "%s:input register failed\n", __func__);
+ goto err_free_irq;
}
return retval;
-err_request_irq:
+err_free_irq:
free_irq(platformdata->irq_number, rmi4_data);
- input_unregister_device(rmi4_data->input_dev);
-err_input_register:
+err_unset_clientdata:
i2c_set_clientdata(client, NULL);
err_query_dev:
if (platformdata->regulator_en) {
WARNING: multiple messages have this Message-ID (diff)
From: Dan Carpenter <error27@gmail.com>
To: Greg Kroah-Hartman <gregkh@suse.de>
Cc: Henrik Rydberg <rydberg@euromail.se>,
Naveen Kumar Gaddipati <naveen.gaddipati@stericsson.com>,
Linus Walleij <linus.walleij@stericsson.com>,
devel@driverdev.osuosl.org, linux-input@vger.kernel.org,
kernel-janitors@vger.kernel.org
Subject: [patch -next] Staging: ste_rmi4: use after input_unregister_device()
Date: Thu, 23 Dec 2010 00:07:33 +0300 [thread overview]
Message-ID: <20101222210733.GJ1936@bicker> (raw)
The original code called input_free_device(rmi4_data->input_dev) after
input_unregister_device(rmi4_data->input_dev) and that's a double free.
This is described in the comments to input_unregister_device().
The normal way to handle this is to make input_register_device() the
last function in the probe which can fail. That way you can avoid the
call to input_unregister_device() entirely.
Signed-off-by: Dan Carpenter <error27@gmail.com>
diff --git a/drivers/staging/ste_rmi4/synaptics_i2c_rmi4.c b/drivers/staging/ste_rmi4/synaptics_i2c_rmi4.c
index e8f047e..80183a7 100644
--- a/drivers/staging/ste_rmi4/synaptics_i2c_rmi4.c
+++ b/drivers/staging/ste_rmi4/synaptics_i2c_rmi4.c
@@ -986,12 +986,6 @@ static int __devinit synaptics_rmi4_probe
input_set_abs_params(rmi4_data->input_dev, ABS_MT_TOUCH_MAJOR, 0,
MAX_TOUCH_MAJOR, 0, 0);
- retval = input_register_device(rmi4_data->input_dev);
- if (retval) {
- dev_err(&client->dev, "%s:input register failed\n", __func__);
- goto err_input_register;
- }
-
/* Clear interrupts */
synaptics_rmi4_i2c_block_read(rmi4_data,
rmi4_data->fn01_data_base_addr + 1, intr_status,
@@ -1003,15 +997,20 @@ static int __devinit synaptics_rmi4_probe
if (retval) {
dev_err(&client->dev, "%s:Unable to get attn irq %d\n",
__func__, platformdata->irq_number);
- goto err_request_irq;
+ goto err_unset_clientdata;
+ }
+
+ retval = input_register_device(rmi4_data->input_dev);
+ if (retval) {
+ dev_err(&client->dev, "%s:input register failed\n", __func__);
+ goto err_free_irq;
}
return retval;
-err_request_irq:
+err_free_irq:
free_irq(platformdata->irq_number, rmi4_data);
- input_unregister_device(rmi4_data->input_dev);
-err_input_register:
+err_unset_clientdata:
i2c_set_clientdata(client, NULL);
err_query_dev:
if (platformdata->regulator_en) {
next reply other threads:[~2010-12-22 21:07 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-12-22 21:07 Dan Carpenter [this message]
2010-12-22 21:07 ` [patch -next] Staging: ste_rmi4: use after input_unregister_device() Dan Carpenter
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20101222210733.GJ1936@bicker \
--to=error27@gmail.com \
--cc=devel@driverdev.osuosl.org \
--cc=gregkh@suse.de \
--cc=kernel-janitors@vger.kernel.org \
--cc=linus.walleij@stericsson.com \
--cc=linux-input@vger.kernel.org \
--cc=naveen.gaddipati@stericsson.com \
--cc=rydberg@euromail.se \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.