From: Kyungmin Park <kmpark@infradead.org>
To: grant.likely@secretlab.ca, linux-kernel@vger.kernel.org
Cc: arnd@arndb.de, kgene.kim@samsung.com,
linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/4] Move the exynos4 GPIO to drivers/gpio
Date: Fri, 20 May 2011 14:44:54 +0900 [thread overview]
Message-ID: <20110520054454.GA9960@july> (raw)
From: Kyungmin Park <kyungmin.park@samsung.com>
Move the Samsung Exynos4 series SoCs GPIO driver to drivers/gpio
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
---
arch/arm/mach-exynos4/Makefile | 2 +-
arch/arm/mach-exynos4/gpiolib.c | 365 ---------------------------------------
drivers/gpio/Kconfig | 6 +
drivers/gpio/Makefile | 1 +
drivers/gpio/exynos4-gpio.c | 365 +++++++++++++++++++++++++++++++++++++++
5 files changed, 373 insertions(+), 366 deletions(-)
delete mode 100644 arch/arm/mach-exynos4/gpiolib.c
create mode 100644 drivers/gpio/exynos4-gpio.c
diff --git a/arch/arm/mach-exynos4/Makefile b/arch/arm/mach-exynos4/Makefile
index 9be104f..3bb3f57 100644
--- a/arch/arm/mach-exynos4/Makefile
+++ b/arch/arm/mach-exynos4/Makefile
@@ -13,7 +13,7 @@ obj- :=
# Core support for EXYNOS4 system
obj-$(CONFIG_CPU_EXYNOS4210) += cpu.o init.o clock.o irq-combiner.o
-obj-$(CONFIG_CPU_EXYNOS4210) += setup-i2c0.o gpiolib.o irq-eint.o dma.o
+obj-$(CONFIG_CPU_EXYNOS4210) += setup-i2c0.o irq-eint.o dma.o
obj-$(CONFIG_PM) += pm.o sleep.o
obj-$(CONFIG_CPU_FREQ) += cpufreq.o
diff --git a/arch/arm/mach-exynos4/gpiolib.c b/arch/arm/mach-exynos4/gpiolib.c
deleted file mode 100644
index d54ca6a..0000000
--- a/arch/arm/mach-exynos4/gpiolib.c
+++ /dev/null
@@ -1,365 +0,0 @@
-/* linux/arch/arm/mach-exynos4/gpiolib.c
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * EXYNOS4 - GPIOlib support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-
-#include <mach/map.h>
-
-#include <plat/gpio-core.h>
-#include <plat/gpio-cfg.h>
-#include <plat/gpio-cfg-helpers.h>
-
-static struct s3c_gpio_cfg gpio_cfg = {
- .set_config = s3c_gpio_setcfg_s3c64xx_4bit,
- .set_pull = s3c_gpio_setpull_updown,
- .get_pull = s3c_gpio_getpull_updown,
-};
-
-static struct s3c_gpio_cfg gpio_cfg_noint = {
- .set_config = s3c_gpio_setcfg_s3c64xx_4bit,
- .set_pull = s3c_gpio_setpull_updown,
- .get_pull = s3c_gpio_getpull_updown,
-};
-
-/*
- * Following are the gpio banks in v310.
- *
- * The 'config' member when left to NULL, is initialized to the default
- * structure gpio_cfg in the init function below.
- *
- * The 'base' member is also initialized in the init function below.
- * Note: The initialization of 'base' member of s3c_gpio_chip structure
- * uses the above macro and depends on the banks being listed in order here.
- */
-static struct s3c_gpio_chip exynos4_gpio_part1_4bit[] = {
- {
- .chip = {
- .base = EXYNOS4_GPA0(0),
- .ngpio = EXYNOS4_GPIO_A0_NR,
- .label = "GPA0",
- },
- }, {
- .chip = {
- .base = EXYNOS4_GPA1(0),
- .ngpio = EXYNOS4_GPIO_A1_NR,
- .label = "GPA1",
- },
- }, {
- .chip = {
- .base = EXYNOS4_GPB(0),
- .ngpio = EXYNOS4_GPIO_B_NR,
- .label = "GPB",
- },
- }, {
- .chip = {
- .base = EXYNOS4_GPC0(0),
- .ngpio = EXYNOS4_GPIO_C0_NR,
- .label = "GPC0",
- },
- }, {
- .chip = {
- .base = EXYNOS4_GPC1(0),
- .ngpio = EXYNOS4_GPIO_C1_NR,
- .label = "GPC1",
- },
- }, {
- .chip = {
- .base = EXYNOS4_GPD0(0),
- .ngpio = EXYNOS4_GPIO_D0_NR,
- .label = "GPD0",
- },
- }, {
- .chip = {
- .base = EXYNOS4_GPD1(0),
- .ngpio = EXYNOS4_GPIO_D1_NR,
- .label = "GPD1",
- },
- }, {
- .chip = {
- .base = EXYNOS4_GPE0(0),
- .ngpio = EXYNOS4_GPIO_E0_NR,
- .label = "GPE0",
- },
- }, {
- .chip = {
- .base = EXYNOS4_GPE1(0),
- .ngpio = EXYNOS4_GPIO_E1_NR,
- .label = "GPE1",
- },
- }, {
- .chip = {
- .base = EXYNOS4_GPE2(0),
- .ngpio = EXYNOS4_GPIO_E2_NR,
- .label = "GPE2",
- },
- }, {
- .chip = {
- .base = EXYNOS4_GPE3(0),
- .ngpio = EXYNOS4_GPIO_E3_NR,
- .label = "GPE3",
- },
- }, {
- .chip = {
- .base = EXYNOS4_GPE4(0),
- .ngpio = EXYNOS4_GPIO_E4_NR,
- .label = "GPE4",
- },
- }, {
- .chip = {
- .base = EXYNOS4_GPF0(0),
- .ngpio = EXYNOS4_GPIO_F0_NR,
- .label = "GPF0",
- },
- }, {
- .chip = {
- .base = EXYNOS4_GPF1(0),
- .ngpio = EXYNOS4_GPIO_F1_NR,
- .label = "GPF1",
- },
- }, {
- .chip = {
- .base = EXYNOS4_GPF2(0),
- .ngpio = EXYNOS4_GPIO_F2_NR,
- .label = "GPF2",
- },
- }, {
- .chip = {
- .base = EXYNOS4_GPF3(0),
- .ngpio = EXYNOS4_GPIO_F3_NR,
- .label = "GPF3",
- },
- },
-};
-
-static struct s3c_gpio_chip exynos4_gpio_part2_4bit[] = {
- {
- .chip = {
- .base = EXYNOS4_GPJ0(0),
- .ngpio = EXYNOS4_GPIO_J0_NR,
- .label = "GPJ0",
- },
- }, {
- .chip = {
- .base = EXYNOS4_GPJ1(0),
- .ngpio = EXYNOS4_GPIO_J1_NR,
- .label = "GPJ1",
- },
- }, {
- .chip = {
- .base = EXYNOS4_GPK0(0),
- .ngpio = EXYNOS4_GPIO_K0_NR,
- .label = "GPK0",
- },
- }, {
- .chip = {
- .base = EXYNOS4_GPK1(0),
- .ngpio = EXYNOS4_GPIO_K1_NR,
- .label = "GPK1",
- },
- }, {
- .chip = {
- .base = EXYNOS4_GPK2(0),
- .ngpio = EXYNOS4_GPIO_K2_NR,
- .label = "GPK2",
- },
- }, {
- .chip = {
- .base = EXYNOS4_GPK3(0),
- .ngpio = EXYNOS4_GPIO_K3_NR,
- .label = "GPK3",
- },
- }, {
- .chip = {
- .base = EXYNOS4_GPL0(0),
- .ngpio = EXYNOS4_GPIO_L0_NR,
- .label = "GPL0",
- },
- }, {
- .chip = {
- .base = EXYNOS4_GPL1(0),
- .ngpio = EXYNOS4_GPIO_L1_NR,
- .label = "GPL1",
- },
- }, {
- .chip = {
- .base = EXYNOS4_GPL2(0),
- .ngpio = EXYNOS4_GPIO_L2_NR,
- .label = "GPL2",
- },
- }, {
- .config = &gpio_cfg_noint,
- .chip = {
- .base = EXYNOS4_GPY0(0),
- .ngpio = EXYNOS4_GPIO_Y0_NR,
- .label = "GPY0",
- },
- }, {
- .config = &gpio_cfg_noint,
- .chip = {
- .base = EXYNOS4_GPY1(0),
- .ngpio = EXYNOS4_GPIO_Y1_NR,
- .label = "GPY1",
- },
- }, {
- .config = &gpio_cfg_noint,
- .chip = {
- .base = EXYNOS4_GPY2(0),
- .ngpio = EXYNOS4_GPIO_Y2_NR,
- .label = "GPY2",
- },
- }, {
- .config = &gpio_cfg_noint,
- .chip = {
- .base = EXYNOS4_GPY3(0),
- .ngpio = EXYNOS4_GPIO_Y3_NR,
- .label = "GPY3",
- },
- }, {
- .config = &gpio_cfg_noint,
- .chip = {
- .base = EXYNOS4_GPY4(0),
- .ngpio = EXYNOS4_GPIO_Y4_NR,
- .label = "GPY4",
- },
- }, {
- .config = &gpio_cfg_noint,
- .chip = {
- .base = EXYNOS4_GPY5(0),
- .ngpio = EXYNOS4_GPIO_Y5_NR,
- .label = "GPY5",
- },
- }, {
- .config = &gpio_cfg_noint,
- .chip = {
- .base = EXYNOS4_GPY6(0),
- .ngpio = EXYNOS4_GPIO_Y6_NR,
- .label = "GPY6",
- },
- }, {
- .base = (S5P_VA_GPIO2 + 0xC00),
- .config = &gpio_cfg_noint,
- .irq_base = IRQ_EINT(0),
- .chip = {
- .base = EXYNOS4_GPX0(0),
- .ngpio = EXYNOS4_GPIO_X0_NR,
- .label = "GPX0",
- .to_irq = samsung_gpiolib_to_irq,
- },
- }, {
- .base = (S5P_VA_GPIO2 + 0xC20),
- .config = &gpio_cfg_noint,
- .irq_base = IRQ_EINT(8),
- .chip = {
- .base = EXYNOS4_GPX1(0),
- .ngpio = EXYNOS4_GPIO_X1_NR,
- .label = "GPX1",
- .to_irq = samsung_gpiolib_to_irq,
- },
- }, {
- .base = (S5P_VA_GPIO2 + 0xC40),
- .config = &gpio_cfg_noint,
- .irq_base = IRQ_EINT(16),
- .chip = {
- .base = EXYNOS4_GPX2(0),
- .ngpio = EXYNOS4_GPIO_X2_NR,
- .label = "GPX2",
- .to_irq = samsung_gpiolib_to_irq,
- },
- }, {
- .base = (S5P_VA_GPIO2 + 0xC60),
- .config = &gpio_cfg_noint,
- .irq_base = IRQ_EINT(24),
- .chip = {
- .base = EXYNOS4_GPX3(0),
- .ngpio = EXYNOS4_GPIO_X3_NR,
- .label = "GPX3",
- .to_irq = samsung_gpiolib_to_irq,
- },
- },
-};
-
-static struct s3c_gpio_chip exynos4_gpio_part3_4bit[] = {
- {
- .chip = {
- .base = EXYNOS4_GPZ(0),
- .ngpio = EXYNOS4_GPIO_Z_NR,
- .label = "GPZ",
- },
- },
-};
-
-static __init int exynos4_gpiolib_init(void)
-{
- struct s3c_gpio_chip *chip;
- int i;
- int group = 0;
- int nr_chips;
-
- /* GPIO part 1 */
-
- chip = exynos4_gpio_part1_4bit;
- nr_chips = ARRAY_SIZE(exynos4_gpio_part1_4bit);
-
- for (i = 0; i < nr_chips; i++, chip++) {
- if (chip->config == NULL) {
- chip->config = &gpio_cfg;
- /* Assign the GPIO interrupt group */
- chip->group = group++;
- }
- if (chip->base == NULL)
- chip->base = S5P_VA_GPIO1 + (i) * 0x20;
- }
-
- samsung_gpiolib_add_4bit_chips(exynos4_gpio_part1_4bit, nr_chips);
-
- /* GPIO part 2 */
-
- chip = exynos4_gpio_part2_4bit;
- nr_chips = ARRAY_SIZE(exynos4_gpio_part2_4bit);
-
- for (i = 0; i < nr_chips; i++, chip++) {
- if (chip->config == NULL) {
- chip->config = &gpio_cfg;
- /* Assign the GPIO interrupt group */
- chip->group = group++;
- }
- if (chip->base == NULL)
- chip->base = S5P_VA_GPIO2 + (i) * 0x20;
- }
-
- samsung_gpiolib_add_4bit_chips(exynos4_gpio_part2_4bit, nr_chips);
-
- /* GPIO part 3 */
-
- chip = exynos4_gpio_part3_4bit;
- nr_chips = ARRAY_SIZE(exynos4_gpio_part3_4bit);
-
- for (i = 0; i < nr_chips; i++, chip++) {
- if (chip->config == NULL) {
- chip->config = &gpio_cfg;
- /* Assign the GPIO interrupt group */
- chip->group = group++;
- }
- if (chip->base == NULL)
- chip->base = S5P_VA_GPIO3 + (i) * 0x20;
- }
-
- samsung_gpiolib_add_4bit_chips(exynos4_gpio_part3_4bit, nr_chips);
- s5p_register_gpioint_bank(IRQ_GPIO_XA, 0, IRQ_GPIO1_NR_GROUPS);
- s5p_register_gpioint_bank(IRQ_GPIO_XB, IRQ_GPIO1_NR_GROUPS, IRQ_GPIO2_NR_GROUPS);
-
- return 0;
-}
-core_initcall(exynos4_gpiolib_init);
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 42376b7..03e7310 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -75,6 +75,12 @@ config GPIO_BASIC_MMIO
help
Say yes here to support basic memory-mapped GPIO controllers.
+config GPIO_EXYNOS4
+ bool "Samsung Exynos4 GPIO library support"
+ default y if CPU_EXYNOS4210
+ help
+ Say yes here to support Samsung Exynos4 series SoCs GPIO library
+
config GPIO_SAMSUNG
bool "Samsung SoCs GPIO library support"
default y if SAMSUNG_GPIOLIB_4BIT
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index 229082d..978ab87 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -11,6 +11,7 @@ obj-$(CONFIG_GPIOLIB) += gpiolib.o
obj-$(CONFIG_GPIO_ADP5520) += adp5520-gpio.o
obj-$(CONFIG_GPIO_ADP5588) += adp5588-gpio.o
obj-$(CONFIG_GPIO_BASIC_MMIO) += basic_mmio_gpio.o
+obj-$(CONFIG_GPIO_EXYNOS4) += exynos4-gpio.o
obj-$(CONFIG_GPIO_SAMSUNG) += samsung-gpiolib.o
obj-$(CONFIG_GPIO_LANGWELL) += langwell_gpio.o
obj-$(CONFIG_GPIO_MAX730X) += max730x.o
diff --git a/drivers/gpio/exynos4-gpio.c b/drivers/gpio/exynos4-gpio.c
new file mode 100644
index 0000000..d54ca6a
--- /dev/null
+++ b/drivers/gpio/exynos4-gpio.c
@@ -0,0 +1,365 @@
+/* linux/arch/arm/mach-exynos4/gpiolib.c
+ *
+ * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * EXYNOS4 - GPIOlib support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+
+#include <mach/map.h>
+
+#include <plat/gpio-core.h>
+#include <plat/gpio-cfg.h>
+#include <plat/gpio-cfg-helpers.h>
+
+static struct s3c_gpio_cfg gpio_cfg = {
+ .set_config = s3c_gpio_setcfg_s3c64xx_4bit,
+ .set_pull = s3c_gpio_setpull_updown,
+ .get_pull = s3c_gpio_getpull_updown,
+};
+
+static struct s3c_gpio_cfg gpio_cfg_noint = {
+ .set_config = s3c_gpio_setcfg_s3c64xx_4bit,
+ .set_pull = s3c_gpio_setpull_updown,
+ .get_pull = s3c_gpio_getpull_updown,
+};
+
+/*
+ * Following are the gpio banks in v310.
+ *
+ * The 'config' member when left to NULL, is initialized to the default
+ * structure gpio_cfg in the init function below.
+ *
+ * The 'base' member is also initialized in the init function below.
+ * Note: The initialization of 'base' member of s3c_gpio_chip structure
+ * uses the above macro and depends on the banks being listed in order here.
+ */
+static struct s3c_gpio_chip exynos4_gpio_part1_4bit[] = {
+ {
+ .chip = {
+ .base = EXYNOS4_GPA0(0),
+ .ngpio = EXYNOS4_GPIO_A0_NR,
+ .label = "GPA0",
+ },
+ }, {
+ .chip = {
+ .base = EXYNOS4_GPA1(0),
+ .ngpio = EXYNOS4_GPIO_A1_NR,
+ .label = "GPA1",
+ },
+ }, {
+ .chip = {
+ .base = EXYNOS4_GPB(0),
+ .ngpio = EXYNOS4_GPIO_B_NR,
+ .label = "GPB",
+ },
+ }, {
+ .chip = {
+ .base = EXYNOS4_GPC0(0),
+ .ngpio = EXYNOS4_GPIO_C0_NR,
+ .label = "GPC0",
+ },
+ }, {
+ .chip = {
+ .base = EXYNOS4_GPC1(0),
+ .ngpio = EXYNOS4_GPIO_C1_NR,
+ .label = "GPC1",
+ },
+ }, {
+ .chip = {
+ .base = EXYNOS4_GPD0(0),
+ .ngpio = EXYNOS4_GPIO_D0_NR,
+ .label = "GPD0",
+ },
+ }, {
+ .chip = {
+ .base = EXYNOS4_GPD1(0),
+ .ngpio = EXYNOS4_GPIO_D1_NR,
+ .label = "GPD1",
+ },
+ }, {
+ .chip = {
+ .base = EXYNOS4_GPE0(0),
+ .ngpio = EXYNOS4_GPIO_E0_NR,
+ .label = "GPE0",
+ },
+ }, {
+ .chip = {
+ .base = EXYNOS4_GPE1(0),
+ .ngpio = EXYNOS4_GPIO_E1_NR,
+ .label = "GPE1",
+ },
+ }, {
+ .chip = {
+ .base = EXYNOS4_GPE2(0),
+ .ngpio = EXYNOS4_GPIO_E2_NR,
+ .label = "GPE2",
+ },
+ }, {
+ .chip = {
+ .base = EXYNOS4_GPE3(0),
+ .ngpio = EXYNOS4_GPIO_E3_NR,
+ .label = "GPE3",
+ },
+ }, {
+ .chip = {
+ .base = EXYNOS4_GPE4(0),
+ .ngpio = EXYNOS4_GPIO_E4_NR,
+ .label = "GPE4",
+ },
+ }, {
+ .chip = {
+ .base = EXYNOS4_GPF0(0),
+ .ngpio = EXYNOS4_GPIO_F0_NR,
+ .label = "GPF0",
+ },
+ }, {
+ .chip = {
+ .base = EXYNOS4_GPF1(0),
+ .ngpio = EXYNOS4_GPIO_F1_NR,
+ .label = "GPF1",
+ },
+ }, {
+ .chip = {
+ .base = EXYNOS4_GPF2(0),
+ .ngpio = EXYNOS4_GPIO_F2_NR,
+ .label = "GPF2",
+ },
+ }, {
+ .chip = {
+ .base = EXYNOS4_GPF3(0),
+ .ngpio = EXYNOS4_GPIO_F3_NR,
+ .label = "GPF3",
+ },
+ },
+};
+
+static struct s3c_gpio_chip exynos4_gpio_part2_4bit[] = {
+ {
+ .chip = {
+ .base = EXYNOS4_GPJ0(0),
+ .ngpio = EXYNOS4_GPIO_J0_NR,
+ .label = "GPJ0",
+ },
+ }, {
+ .chip = {
+ .base = EXYNOS4_GPJ1(0),
+ .ngpio = EXYNOS4_GPIO_J1_NR,
+ .label = "GPJ1",
+ },
+ }, {
+ .chip = {
+ .base = EXYNOS4_GPK0(0),
+ .ngpio = EXYNOS4_GPIO_K0_NR,
+ .label = "GPK0",
+ },
+ }, {
+ .chip = {
+ .base = EXYNOS4_GPK1(0),
+ .ngpio = EXYNOS4_GPIO_K1_NR,
+ .label = "GPK1",
+ },
+ }, {
+ .chip = {
+ .base = EXYNOS4_GPK2(0),
+ .ngpio = EXYNOS4_GPIO_K2_NR,
+ .label = "GPK2",
+ },
+ }, {
+ .chip = {
+ .base = EXYNOS4_GPK3(0),
+ .ngpio = EXYNOS4_GPIO_K3_NR,
+ .label = "GPK3",
+ },
+ }, {
+ .chip = {
+ .base = EXYNOS4_GPL0(0),
+ .ngpio = EXYNOS4_GPIO_L0_NR,
+ .label = "GPL0",
+ },
+ }, {
+ .chip = {
+ .base = EXYNOS4_GPL1(0),
+ .ngpio = EXYNOS4_GPIO_L1_NR,
+ .label = "GPL1",
+ },
+ }, {
+ .chip = {
+ .base = EXYNOS4_GPL2(0),
+ .ngpio = EXYNOS4_GPIO_L2_NR,
+ .label = "GPL2",
+ },
+ }, {
+ .config = &gpio_cfg_noint,
+ .chip = {
+ .base = EXYNOS4_GPY0(0),
+ .ngpio = EXYNOS4_GPIO_Y0_NR,
+ .label = "GPY0",
+ },
+ }, {
+ .config = &gpio_cfg_noint,
+ .chip = {
+ .base = EXYNOS4_GPY1(0),
+ .ngpio = EXYNOS4_GPIO_Y1_NR,
+ .label = "GPY1",
+ },
+ }, {
+ .config = &gpio_cfg_noint,
+ .chip = {
+ .base = EXYNOS4_GPY2(0),
+ .ngpio = EXYNOS4_GPIO_Y2_NR,
+ .label = "GPY2",
+ },
+ }, {
+ .config = &gpio_cfg_noint,
+ .chip = {
+ .base = EXYNOS4_GPY3(0),
+ .ngpio = EXYNOS4_GPIO_Y3_NR,
+ .label = "GPY3",
+ },
+ }, {
+ .config = &gpio_cfg_noint,
+ .chip = {
+ .base = EXYNOS4_GPY4(0),
+ .ngpio = EXYNOS4_GPIO_Y4_NR,
+ .label = "GPY4",
+ },
+ }, {
+ .config = &gpio_cfg_noint,
+ .chip = {
+ .base = EXYNOS4_GPY5(0),
+ .ngpio = EXYNOS4_GPIO_Y5_NR,
+ .label = "GPY5",
+ },
+ }, {
+ .config = &gpio_cfg_noint,
+ .chip = {
+ .base = EXYNOS4_GPY6(0),
+ .ngpio = EXYNOS4_GPIO_Y6_NR,
+ .label = "GPY6",
+ },
+ }, {
+ .base = (S5P_VA_GPIO2 + 0xC00),
+ .config = &gpio_cfg_noint,
+ .irq_base = IRQ_EINT(0),
+ .chip = {
+ .base = EXYNOS4_GPX0(0),
+ .ngpio = EXYNOS4_GPIO_X0_NR,
+ .label = "GPX0",
+ .to_irq = samsung_gpiolib_to_irq,
+ },
+ }, {
+ .base = (S5P_VA_GPIO2 + 0xC20),
+ .config = &gpio_cfg_noint,
+ .irq_base = IRQ_EINT(8),
+ .chip = {
+ .base = EXYNOS4_GPX1(0),
+ .ngpio = EXYNOS4_GPIO_X1_NR,
+ .label = "GPX1",
+ .to_irq = samsung_gpiolib_to_irq,
+ },
+ }, {
+ .base = (S5P_VA_GPIO2 + 0xC40),
+ .config = &gpio_cfg_noint,
+ .irq_base = IRQ_EINT(16),
+ .chip = {
+ .base = EXYNOS4_GPX2(0),
+ .ngpio = EXYNOS4_GPIO_X2_NR,
+ .label = "GPX2",
+ .to_irq = samsung_gpiolib_to_irq,
+ },
+ }, {
+ .base = (S5P_VA_GPIO2 + 0xC60),
+ .config = &gpio_cfg_noint,
+ .irq_base = IRQ_EINT(24),
+ .chip = {
+ .base = EXYNOS4_GPX3(0),
+ .ngpio = EXYNOS4_GPIO_X3_NR,
+ .label = "GPX3",
+ .to_irq = samsung_gpiolib_to_irq,
+ },
+ },
+};
+
+static struct s3c_gpio_chip exynos4_gpio_part3_4bit[] = {
+ {
+ .chip = {
+ .base = EXYNOS4_GPZ(0),
+ .ngpio = EXYNOS4_GPIO_Z_NR,
+ .label = "GPZ",
+ },
+ },
+};
+
+static __init int exynos4_gpiolib_init(void)
+{
+ struct s3c_gpio_chip *chip;
+ int i;
+ int group = 0;
+ int nr_chips;
+
+ /* GPIO part 1 */
+
+ chip = exynos4_gpio_part1_4bit;
+ nr_chips = ARRAY_SIZE(exynos4_gpio_part1_4bit);
+
+ for (i = 0; i < nr_chips; i++, chip++) {
+ if (chip->config == NULL) {
+ chip->config = &gpio_cfg;
+ /* Assign the GPIO interrupt group */
+ chip->group = group++;
+ }
+ if (chip->base == NULL)
+ chip->base = S5P_VA_GPIO1 + (i) * 0x20;
+ }
+
+ samsung_gpiolib_add_4bit_chips(exynos4_gpio_part1_4bit, nr_chips);
+
+ /* GPIO part 2 */
+
+ chip = exynos4_gpio_part2_4bit;
+ nr_chips = ARRAY_SIZE(exynos4_gpio_part2_4bit);
+
+ for (i = 0; i < nr_chips; i++, chip++) {
+ if (chip->config == NULL) {
+ chip->config = &gpio_cfg;
+ /* Assign the GPIO interrupt group */
+ chip->group = group++;
+ }
+ if (chip->base == NULL)
+ chip->base = S5P_VA_GPIO2 + (i) * 0x20;
+ }
+
+ samsung_gpiolib_add_4bit_chips(exynos4_gpio_part2_4bit, nr_chips);
+
+ /* GPIO part 3 */
+
+ chip = exynos4_gpio_part3_4bit;
+ nr_chips = ARRAY_SIZE(exynos4_gpio_part3_4bit);
+
+ for (i = 0; i < nr_chips; i++, chip++) {
+ if (chip->config == NULL) {
+ chip->config = &gpio_cfg;
+ /* Assign the GPIO interrupt group */
+ chip->group = group++;
+ }
+ if (chip->base == NULL)
+ chip->base = S5P_VA_GPIO3 + (i) * 0x20;
+ }
+
+ samsung_gpiolib_add_4bit_chips(exynos4_gpio_part3_4bit, nr_chips);
+ s5p_register_gpioint_bank(IRQ_GPIO_XA, 0, IRQ_GPIO1_NR_GROUPS);
+ s5p_register_gpioint_bank(IRQ_GPIO_XB, IRQ_GPIO1_NR_GROUPS, IRQ_GPIO2_NR_GROUPS);
+
+ return 0;
+}
+core_initcall(exynos4_gpiolib_init);
--
1.7.5.1.300.gc565c
WARNING: multiple messages have this Message-ID (diff)
From: kmpark@infradead.org (Kyungmin Park)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/4] Move the exynos4 GPIO to drivers/gpio
Date: Fri, 20 May 2011 14:44:54 +0900 [thread overview]
Message-ID: <20110520054454.GA9960@july> (raw)
From: Kyungmin Park <kyungmin.park@samsung.com>
Move the Samsung Exynos4 series SoCs GPIO driver to drivers/gpio
Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
---
arch/arm/mach-exynos4/Makefile | 2 +-
arch/arm/mach-exynos4/gpiolib.c | 365 ---------------------------------------
drivers/gpio/Kconfig | 6 +
drivers/gpio/Makefile | 1 +
drivers/gpio/exynos4-gpio.c | 365 +++++++++++++++++++++++++++++++++++++++
5 files changed, 373 insertions(+), 366 deletions(-)
delete mode 100644 arch/arm/mach-exynos4/gpiolib.c
create mode 100644 drivers/gpio/exynos4-gpio.c
diff --git a/arch/arm/mach-exynos4/Makefile b/arch/arm/mach-exynos4/Makefile
index 9be104f..3bb3f57 100644
--- a/arch/arm/mach-exynos4/Makefile
+++ b/arch/arm/mach-exynos4/Makefile
@@ -13,7 +13,7 @@ obj- :=
# Core support for EXYNOS4 system
obj-$(CONFIG_CPU_EXYNOS4210) += cpu.o init.o clock.o irq-combiner.o
-obj-$(CONFIG_CPU_EXYNOS4210) += setup-i2c0.o gpiolib.o irq-eint.o dma.o
+obj-$(CONFIG_CPU_EXYNOS4210) += setup-i2c0.o irq-eint.o dma.o
obj-$(CONFIG_PM) += pm.o sleep.o
obj-$(CONFIG_CPU_FREQ) += cpufreq.o
diff --git a/arch/arm/mach-exynos4/gpiolib.c b/arch/arm/mach-exynos4/gpiolib.c
deleted file mode 100644
index d54ca6a..0000000
--- a/arch/arm/mach-exynos4/gpiolib.c
+++ /dev/null
@@ -1,365 +0,0 @@
-/* linux/arch/arm/mach-exynos4/gpiolib.c
- *
- * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
- * http://www.samsung.com
- *
- * EXYNOS4 - GPIOlib support
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#include <linux/kernel.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-
-#include <mach/map.h>
-
-#include <plat/gpio-core.h>
-#include <plat/gpio-cfg.h>
-#include <plat/gpio-cfg-helpers.h>
-
-static struct s3c_gpio_cfg gpio_cfg = {
- .set_config = s3c_gpio_setcfg_s3c64xx_4bit,
- .set_pull = s3c_gpio_setpull_updown,
- .get_pull = s3c_gpio_getpull_updown,
-};
-
-static struct s3c_gpio_cfg gpio_cfg_noint = {
- .set_config = s3c_gpio_setcfg_s3c64xx_4bit,
- .set_pull = s3c_gpio_setpull_updown,
- .get_pull = s3c_gpio_getpull_updown,
-};
-
-/*
- * Following are the gpio banks in v310.
- *
- * The 'config' member when left to NULL, is initialized to the default
- * structure gpio_cfg in the init function below.
- *
- * The 'base' member is also initialized in the init function below.
- * Note: The initialization of 'base' member of s3c_gpio_chip structure
- * uses the above macro and depends on the banks being listed in order here.
- */
-static struct s3c_gpio_chip exynos4_gpio_part1_4bit[] = {
- {
- .chip = {
- .base = EXYNOS4_GPA0(0),
- .ngpio = EXYNOS4_GPIO_A0_NR,
- .label = "GPA0",
- },
- }, {
- .chip = {
- .base = EXYNOS4_GPA1(0),
- .ngpio = EXYNOS4_GPIO_A1_NR,
- .label = "GPA1",
- },
- }, {
- .chip = {
- .base = EXYNOS4_GPB(0),
- .ngpio = EXYNOS4_GPIO_B_NR,
- .label = "GPB",
- },
- }, {
- .chip = {
- .base = EXYNOS4_GPC0(0),
- .ngpio = EXYNOS4_GPIO_C0_NR,
- .label = "GPC0",
- },
- }, {
- .chip = {
- .base = EXYNOS4_GPC1(0),
- .ngpio = EXYNOS4_GPIO_C1_NR,
- .label = "GPC1",
- },
- }, {
- .chip = {
- .base = EXYNOS4_GPD0(0),
- .ngpio = EXYNOS4_GPIO_D0_NR,
- .label = "GPD0",
- },
- }, {
- .chip = {
- .base = EXYNOS4_GPD1(0),
- .ngpio = EXYNOS4_GPIO_D1_NR,
- .label = "GPD1",
- },
- }, {
- .chip = {
- .base = EXYNOS4_GPE0(0),
- .ngpio = EXYNOS4_GPIO_E0_NR,
- .label = "GPE0",
- },
- }, {
- .chip = {
- .base = EXYNOS4_GPE1(0),
- .ngpio = EXYNOS4_GPIO_E1_NR,
- .label = "GPE1",
- },
- }, {
- .chip = {
- .base = EXYNOS4_GPE2(0),
- .ngpio = EXYNOS4_GPIO_E2_NR,
- .label = "GPE2",
- },
- }, {
- .chip = {
- .base = EXYNOS4_GPE3(0),
- .ngpio = EXYNOS4_GPIO_E3_NR,
- .label = "GPE3",
- },
- }, {
- .chip = {
- .base = EXYNOS4_GPE4(0),
- .ngpio = EXYNOS4_GPIO_E4_NR,
- .label = "GPE4",
- },
- }, {
- .chip = {
- .base = EXYNOS4_GPF0(0),
- .ngpio = EXYNOS4_GPIO_F0_NR,
- .label = "GPF0",
- },
- }, {
- .chip = {
- .base = EXYNOS4_GPF1(0),
- .ngpio = EXYNOS4_GPIO_F1_NR,
- .label = "GPF1",
- },
- }, {
- .chip = {
- .base = EXYNOS4_GPF2(0),
- .ngpio = EXYNOS4_GPIO_F2_NR,
- .label = "GPF2",
- },
- }, {
- .chip = {
- .base = EXYNOS4_GPF3(0),
- .ngpio = EXYNOS4_GPIO_F3_NR,
- .label = "GPF3",
- },
- },
-};
-
-static struct s3c_gpio_chip exynos4_gpio_part2_4bit[] = {
- {
- .chip = {
- .base = EXYNOS4_GPJ0(0),
- .ngpio = EXYNOS4_GPIO_J0_NR,
- .label = "GPJ0",
- },
- }, {
- .chip = {
- .base = EXYNOS4_GPJ1(0),
- .ngpio = EXYNOS4_GPIO_J1_NR,
- .label = "GPJ1",
- },
- }, {
- .chip = {
- .base = EXYNOS4_GPK0(0),
- .ngpio = EXYNOS4_GPIO_K0_NR,
- .label = "GPK0",
- },
- }, {
- .chip = {
- .base = EXYNOS4_GPK1(0),
- .ngpio = EXYNOS4_GPIO_K1_NR,
- .label = "GPK1",
- },
- }, {
- .chip = {
- .base = EXYNOS4_GPK2(0),
- .ngpio = EXYNOS4_GPIO_K2_NR,
- .label = "GPK2",
- },
- }, {
- .chip = {
- .base = EXYNOS4_GPK3(0),
- .ngpio = EXYNOS4_GPIO_K3_NR,
- .label = "GPK3",
- },
- }, {
- .chip = {
- .base = EXYNOS4_GPL0(0),
- .ngpio = EXYNOS4_GPIO_L0_NR,
- .label = "GPL0",
- },
- }, {
- .chip = {
- .base = EXYNOS4_GPL1(0),
- .ngpio = EXYNOS4_GPIO_L1_NR,
- .label = "GPL1",
- },
- }, {
- .chip = {
- .base = EXYNOS4_GPL2(0),
- .ngpio = EXYNOS4_GPIO_L2_NR,
- .label = "GPL2",
- },
- }, {
- .config = &gpio_cfg_noint,
- .chip = {
- .base = EXYNOS4_GPY0(0),
- .ngpio = EXYNOS4_GPIO_Y0_NR,
- .label = "GPY0",
- },
- }, {
- .config = &gpio_cfg_noint,
- .chip = {
- .base = EXYNOS4_GPY1(0),
- .ngpio = EXYNOS4_GPIO_Y1_NR,
- .label = "GPY1",
- },
- }, {
- .config = &gpio_cfg_noint,
- .chip = {
- .base = EXYNOS4_GPY2(0),
- .ngpio = EXYNOS4_GPIO_Y2_NR,
- .label = "GPY2",
- },
- }, {
- .config = &gpio_cfg_noint,
- .chip = {
- .base = EXYNOS4_GPY3(0),
- .ngpio = EXYNOS4_GPIO_Y3_NR,
- .label = "GPY3",
- },
- }, {
- .config = &gpio_cfg_noint,
- .chip = {
- .base = EXYNOS4_GPY4(0),
- .ngpio = EXYNOS4_GPIO_Y4_NR,
- .label = "GPY4",
- },
- }, {
- .config = &gpio_cfg_noint,
- .chip = {
- .base = EXYNOS4_GPY5(0),
- .ngpio = EXYNOS4_GPIO_Y5_NR,
- .label = "GPY5",
- },
- }, {
- .config = &gpio_cfg_noint,
- .chip = {
- .base = EXYNOS4_GPY6(0),
- .ngpio = EXYNOS4_GPIO_Y6_NR,
- .label = "GPY6",
- },
- }, {
- .base = (S5P_VA_GPIO2 + 0xC00),
- .config = &gpio_cfg_noint,
- .irq_base = IRQ_EINT(0),
- .chip = {
- .base = EXYNOS4_GPX0(0),
- .ngpio = EXYNOS4_GPIO_X0_NR,
- .label = "GPX0",
- .to_irq = samsung_gpiolib_to_irq,
- },
- }, {
- .base = (S5P_VA_GPIO2 + 0xC20),
- .config = &gpio_cfg_noint,
- .irq_base = IRQ_EINT(8),
- .chip = {
- .base = EXYNOS4_GPX1(0),
- .ngpio = EXYNOS4_GPIO_X1_NR,
- .label = "GPX1",
- .to_irq = samsung_gpiolib_to_irq,
- },
- }, {
- .base = (S5P_VA_GPIO2 + 0xC40),
- .config = &gpio_cfg_noint,
- .irq_base = IRQ_EINT(16),
- .chip = {
- .base = EXYNOS4_GPX2(0),
- .ngpio = EXYNOS4_GPIO_X2_NR,
- .label = "GPX2",
- .to_irq = samsung_gpiolib_to_irq,
- },
- }, {
- .base = (S5P_VA_GPIO2 + 0xC60),
- .config = &gpio_cfg_noint,
- .irq_base = IRQ_EINT(24),
- .chip = {
- .base = EXYNOS4_GPX3(0),
- .ngpio = EXYNOS4_GPIO_X3_NR,
- .label = "GPX3",
- .to_irq = samsung_gpiolib_to_irq,
- },
- },
-};
-
-static struct s3c_gpio_chip exynos4_gpio_part3_4bit[] = {
- {
- .chip = {
- .base = EXYNOS4_GPZ(0),
- .ngpio = EXYNOS4_GPIO_Z_NR,
- .label = "GPZ",
- },
- },
-};
-
-static __init int exynos4_gpiolib_init(void)
-{
- struct s3c_gpio_chip *chip;
- int i;
- int group = 0;
- int nr_chips;
-
- /* GPIO part 1 */
-
- chip = exynos4_gpio_part1_4bit;
- nr_chips = ARRAY_SIZE(exynos4_gpio_part1_4bit);
-
- for (i = 0; i < nr_chips; i++, chip++) {
- if (chip->config == NULL) {
- chip->config = &gpio_cfg;
- /* Assign the GPIO interrupt group */
- chip->group = group++;
- }
- if (chip->base == NULL)
- chip->base = S5P_VA_GPIO1 + (i) * 0x20;
- }
-
- samsung_gpiolib_add_4bit_chips(exynos4_gpio_part1_4bit, nr_chips);
-
- /* GPIO part 2 */
-
- chip = exynos4_gpio_part2_4bit;
- nr_chips = ARRAY_SIZE(exynos4_gpio_part2_4bit);
-
- for (i = 0; i < nr_chips; i++, chip++) {
- if (chip->config == NULL) {
- chip->config = &gpio_cfg;
- /* Assign the GPIO interrupt group */
- chip->group = group++;
- }
- if (chip->base == NULL)
- chip->base = S5P_VA_GPIO2 + (i) * 0x20;
- }
-
- samsung_gpiolib_add_4bit_chips(exynos4_gpio_part2_4bit, nr_chips);
-
- /* GPIO part 3 */
-
- chip = exynos4_gpio_part3_4bit;
- nr_chips = ARRAY_SIZE(exynos4_gpio_part3_4bit);
-
- for (i = 0; i < nr_chips; i++, chip++) {
- if (chip->config == NULL) {
- chip->config = &gpio_cfg;
- /* Assign the GPIO interrupt group */
- chip->group = group++;
- }
- if (chip->base == NULL)
- chip->base = S5P_VA_GPIO3 + (i) * 0x20;
- }
-
- samsung_gpiolib_add_4bit_chips(exynos4_gpio_part3_4bit, nr_chips);
- s5p_register_gpioint_bank(IRQ_GPIO_XA, 0, IRQ_GPIO1_NR_GROUPS);
- s5p_register_gpioint_bank(IRQ_GPIO_XB, IRQ_GPIO1_NR_GROUPS, IRQ_GPIO2_NR_GROUPS);
-
- return 0;
-}
-core_initcall(exynos4_gpiolib_init);
diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index 42376b7..03e7310 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -75,6 +75,12 @@ config GPIO_BASIC_MMIO
help
Say yes here to support basic memory-mapped GPIO controllers.
+config GPIO_EXYNOS4
+ bool "Samsung Exynos4 GPIO library support"
+ default y if CPU_EXYNOS4210
+ help
+ Say yes here to support Samsung Exynos4 series SoCs GPIO library
+
config GPIO_SAMSUNG
bool "Samsung SoCs GPIO library support"
default y if SAMSUNG_GPIOLIB_4BIT
diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile
index 229082d..978ab87 100644
--- a/drivers/gpio/Makefile
+++ b/drivers/gpio/Makefile
@@ -11,6 +11,7 @@ obj-$(CONFIG_GPIOLIB) += gpiolib.o
obj-$(CONFIG_GPIO_ADP5520) += adp5520-gpio.o
obj-$(CONFIG_GPIO_ADP5588) += adp5588-gpio.o
obj-$(CONFIG_GPIO_BASIC_MMIO) += basic_mmio_gpio.o
+obj-$(CONFIG_GPIO_EXYNOS4) += exynos4-gpio.o
obj-$(CONFIG_GPIO_SAMSUNG) += samsung-gpiolib.o
obj-$(CONFIG_GPIO_LANGWELL) += langwell_gpio.o
obj-$(CONFIG_GPIO_MAX730X) += max730x.o
diff --git a/drivers/gpio/exynos4-gpio.c b/drivers/gpio/exynos4-gpio.c
new file mode 100644
index 0000000..d54ca6a
--- /dev/null
+++ b/drivers/gpio/exynos4-gpio.c
@@ -0,0 +1,365 @@
+/* linux/arch/arm/mach-exynos4/gpiolib.c
+ *
+ * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd.
+ * http://www.samsung.com
+ *
+ * EXYNOS4 - GPIOlib support
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+*/
+
+#include <linux/kernel.h>
+#include <linux/irq.h>
+#include <linux/io.h>
+#include <linux/gpio.h>
+
+#include <mach/map.h>
+
+#include <plat/gpio-core.h>
+#include <plat/gpio-cfg.h>
+#include <plat/gpio-cfg-helpers.h>
+
+static struct s3c_gpio_cfg gpio_cfg = {
+ .set_config = s3c_gpio_setcfg_s3c64xx_4bit,
+ .set_pull = s3c_gpio_setpull_updown,
+ .get_pull = s3c_gpio_getpull_updown,
+};
+
+static struct s3c_gpio_cfg gpio_cfg_noint = {
+ .set_config = s3c_gpio_setcfg_s3c64xx_4bit,
+ .set_pull = s3c_gpio_setpull_updown,
+ .get_pull = s3c_gpio_getpull_updown,
+};
+
+/*
+ * Following are the gpio banks in v310.
+ *
+ * The 'config' member when left to NULL, is initialized to the default
+ * structure gpio_cfg in the init function below.
+ *
+ * The 'base' member is also initialized in the init function below.
+ * Note: The initialization of 'base' member of s3c_gpio_chip structure
+ * uses the above macro and depends on the banks being listed in order here.
+ */
+static struct s3c_gpio_chip exynos4_gpio_part1_4bit[] = {
+ {
+ .chip = {
+ .base = EXYNOS4_GPA0(0),
+ .ngpio = EXYNOS4_GPIO_A0_NR,
+ .label = "GPA0",
+ },
+ }, {
+ .chip = {
+ .base = EXYNOS4_GPA1(0),
+ .ngpio = EXYNOS4_GPIO_A1_NR,
+ .label = "GPA1",
+ },
+ }, {
+ .chip = {
+ .base = EXYNOS4_GPB(0),
+ .ngpio = EXYNOS4_GPIO_B_NR,
+ .label = "GPB",
+ },
+ }, {
+ .chip = {
+ .base = EXYNOS4_GPC0(0),
+ .ngpio = EXYNOS4_GPIO_C0_NR,
+ .label = "GPC0",
+ },
+ }, {
+ .chip = {
+ .base = EXYNOS4_GPC1(0),
+ .ngpio = EXYNOS4_GPIO_C1_NR,
+ .label = "GPC1",
+ },
+ }, {
+ .chip = {
+ .base = EXYNOS4_GPD0(0),
+ .ngpio = EXYNOS4_GPIO_D0_NR,
+ .label = "GPD0",
+ },
+ }, {
+ .chip = {
+ .base = EXYNOS4_GPD1(0),
+ .ngpio = EXYNOS4_GPIO_D1_NR,
+ .label = "GPD1",
+ },
+ }, {
+ .chip = {
+ .base = EXYNOS4_GPE0(0),
+ .ngpio = EXYNOS4_GPIO_E0_NR,
+ .label = "GPE0",
+ },
+ }, {
+ .chip = {
+ .base = EXYNOS4_GPE1(0),
+ .ngpio = EXYNOS4_GPIO_E1_NR,
+ .label = "GPE1",
+ },
+ }, {
+ .chip = {
+ .base = EXYNOS4_GPE2(0),
+ .ngpio = EXYNOS4_GPIO_E2_NR,
+ .label = "GPE2",
+ },
+ }, {
+ .chip = {
+ .base = EXYNOS4_GPE3(0),
+ .ngpio = EXYNOS4_GPIO_E3_NR,
+ .label = "GPE3",
+ },
+ }, {
+ .chip = {
+ .base = EXYNOS4_GPE4(0),
+ .ngpio = EXYNOS4_GPIO_E4_NR,
+ .label = "GPE4",
+ },
+ }, {
+ .chip = {
+ .base = EXYNOS4_GPF0(0),
+ .ngpio = EXYNOS4_GPIO_F0_NR,
+ .label = "GPF0",
+ },
+ }, {
+ .chip = {
+ .base = EXYNOS4_GPF1(0),
+ .ngpio = EXYNOS4_GPIO_F1_NR,
+ .label = "GPF1",
+ },
+ }, {
+ .chip = {
+ .base = EXYNOS4_GPF2(0),
+ .ngpio = EXYNOS4_GPIO_F2_NR,
+ .label = "GPF2",
+ },
+ }, {
+ .chip = {
+ .base = EXYNOS4_GPF3(0),
+ .ngpio = EXYNOS4_GPIO_F3_NR,
+ .label = "GPF3",
+ },
+ },
+};
+
+static struct s3c_gpio_chip exynos4_gpio_part2_4bit[] = {
+ {
+ .chip = {
+ .base = EXYNOS4_GPJ0(0),
+ .ngpio = EXYNOS4_GPIO_J0_NR,
+ .label = "GPJ0",
+ },
+ }, {
+ .chip = {
+ .base = EXYNOS4_GPJ1(0),
+ .ngpio = EXYNOS4_GPIO_J1_NR,
+ .label = "GPJ1",
+ },
+ }, {
+ .chip = {
+ .base = EXYNOS4_GPK0(0),
+ .ngpio = EXYNOS4_GPIO_K0_NR,
+ .label = "GPK0",
+ },
+ }, {
+ .chip = {
+ .base = EXYNOS4_GPK1(0),
+ .ngpio = EXYNOS4_GPIO_K1_NR,
+ .label = "GPK1",
+ },
+ }, {
+ .chip = {
+ .base = EXYNOS4_GPK2(0),
+ .ngpio = EXYNOS4_GPIO_K2_NR,
+ .label = "GPK2",
+ },
+ }, {
+ .chip = {
+ .base = EXYNOS4_GPK3(0),
+ .ngpio = EXYNOS4_GPIO_K3_NR,
+ .label = "GPK3",
+ },
+ }, {
+ .chip = {
+ .base = EXYNOS4_GPL0(0),
+ .ngpio = EXYNOS4_GPIO_L0_NR,
+ .label = "GPL0",
+ },
+ }, {
+ .chip = {
+ .base = EXYNOS4_GPL1(0),
+ .ngpio = EXYNOS4_GPIO_L1_NR,
+ .label = "GPL1",
+ },
+ }, {
+ .chip = {
+ .base = EXYNOS4_GPL2(0),
+ .ngpio = EXYNOS4_GPIO_L2_NR,
+ .label = "GPL2",
+ },
+ }, {
+ .config = &gpio_cfg_noint,
+ .chip = {
+ .base = EXYNOS4_GPY0(0),
+ .ngpio = EXYNOS4_GPIO_Y0_NR,
+ .label = "GPY0",
+ },
+ }, {
+ .config = &gpio_cfg_noint,
+ .chip = {
+ .base = EXYNOS4_GPY1(0),
+ .ngpio = EXYNOS4_GPIO_Y1_NR,
+ .label = "GPY1",
+ },
+ }, {
+ .config = &gpio_cfg_noint,
+ .chip = {
+ .base = EXYNOS4_GPY2(0),
+ .ngpio = EXYNOS4_GPIO_Y2_NR,
+ .label = "GPY2",
+ },
+ }, {
+ .config = &gpio_cfg_noint,
+ .chip = {
+ .base = EXYNOS4_GPY3(0),
+ .ngpio = EXYNOS4_GPIO_Y3_NR,
+ .label = "GPY3",
+ },
+ }, {
+ .config = &gpio_cfg_noint,
+ .chip = {
+ .base = EXYNOS4_GPY4(0),
+ .ngpio = EXYNOS4_GPIO_Y4_NR,
+ .label = "GPY4",
+ },
+ }, {
+ .config = &gpio_cfg_noint,
+ .chip = {
+ .base = EXYNOS4_GPY5(0),
+ .ngpio = EXYNOS4_GPIO_Y5_NR,
+ .label = "GPY5",
+ },
+ }, {
+ .config = &gpio_cfg_noint,
+ .chip = {
+ .base = EXYNOS4_GPY6(0),
+ .ngpio = EXYNOS4_GPIO_Y6_NR,
+ .label = "GPY6",
+ },
+ }, {
+ .base = (S5P_VA_GPIO2 + 0xC00),
+ .config = &gpio_cfg_noint,
+ .irq_base = IRQ_EINT(0),
+ .chip = {
+ .base = EXYNOS4_GPX0(0),
+ .ngpio = EXYNOS4_GPIO_X0_NR,
+ .label = "GPX0",
+ .to_irq = samsung_gpiolib_to_irq,
+ },
+ }, {
+ .base = (S5P_VA_GPIO2 + 0xC20),
+ .config = &gpio_cfg_noint,
+ .irq_base = IRQ_EINT(8),
+ .chip = {
+ .base = EXYNOS4_GPX1(0),
+ .ngpio = EXYNOS4_GPIO_X1_NR,
+ .label = "GPX1",
+ .to_irq = samsung_gpiolib_to_irq,
+ },
+ }, {
+ .base = (S5P_VA_GPIO2 + 0xC40),
+ .config = &gpio_cfg_noint,
+ .irq_base = IRQ_EINT(16),
+ .chip = {
+ .base = EXYNOS4_GPX2(0),
+ .ngpio = EXYNOS4_GPIO_X2_NR,
+ .label = "GPX2",
+ .to_irq = samsung_gpiolib_to_irq,
+ },
+ }, {
+ .base = (S5P_VA_GPIO2 + 0xC60),
+ .config = &gpio_cfg_noint,
+ .irq_base = IRQ_EINT(24),
+ .chip = {
+ .base = EXYNOS4_GPX3(0),
+ .ngpio = EXYNOS4_GPIO_X3_NR,
+ .label = "GPX3",
+ .to_irq = samsung_gpiolib_to_irq,
+ },
+ },
+};
+
+static struct s3c_gpio_chip exynos4_gpio_part3_4bit[] = {
+ {
+ .chip = {
+ .base = EXYNOS4_GPZ(0),
+ .ngpio = EXYNOS4_GPIO_Z_NR,
+ .label = "GPZ",
+ },
+ },
+};
+
+static __init int exynos4_gpiolib_init(void)
+{
+ struct s3c_gpio_chip *chip;
+ int i;
+ int group = 0;
+ int nr_chips;
+
+ /* GPIO part 1 */
+
+ chip = exynos4_gpio_part1_4bit;
+ nr_chips = ARRAY_SIZE(exynos4_gpio_part1_4bit);
+
+ for (i = 0; i < nr_chips; i++, chip++) {
+ if (chip->config == NULL) {
+ chip->config = &gpio_cfg;
+ /* Assign the GPIO interrupt group */
+ chip->group = group++;
+ }
+ if (chip->base == NULL)
+ chip->base = S5P_VA_GPIO1 + (i) * 0x20;
+ }
+
+ samsung_gpiolib_add_4bit_chips(exynos4_gpio_part1_4bit, nr_chips);
+
+ /* GPIO part 2 */
+
+ chip = exynos4_gpio_part2_4bit;
+ nr_chips = ARRAY_SIZE(exynos4_gpio_part2_4bit);
+
+ for (i = 0; i < nr_chips; i++, chip++) {
+ if (chip->config == NULL) {
+ chip->config = &gpio_cfg;
+ /* Assign the GPIO interrupt group */
+ chip->group = group++;
+ }
+ if (chip->base == NULL)
+ chip->base = S5P_VA_GPIO2 + (i) * 0x20;
+ }
+
+ samsung_gpiolib_add_4bit_chips(exynos4_gpio_part2_4bit, nr_chips);
+
+ /* GPIO part 3 */
+
+ chip = exynos4_gpio_part3_4bit;
+ nr_chips = ARRAY_SIZE(exynos4_gpio_part3_4bit);
+
+ for (i = 0; i < nr_chips; i++, chip++) {
+ if (chip->config == NULL) {
+ chip->config = &gpio_cfg;
+ /* Assign the GPIO interrupt group */
+ chip->group = group++;
+ }
+ if (chip->base == NULL)
+ chip->base = S5P_VA_GPIO3 + (i) * 0x20;
+ }
+
+ samsung_gpiolib_add_4bit_chips(exynos4_gpio_part3_4bit, nr_chips);
+ s5p_register_gpioint_bank(IRQ_GPIO_XA, 0, IRQ_GPIO1_NR_GROUPS);
+ s5p_register_gpioint_bank(IRQ_GPIO_XB, IRQ_GPIO1_NR_GROUPS, IRQ_GPIO2_NR_GROUPS);
+
+ return 0;
+}
+core_initcall(exynos4_gpiolib_init);
--
1.7.5.1.300.gc565c
next reply other threads:[~2011-05-20 5:45 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-05-20 5:44 Kyungmin Park [this message]
2011-05-20 5:44 ` [PATCH 2/4] Move the exynos4 GPIO to drivers/gpio Kyungmin Park
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20110520054454.GA9960@july \
--to=kmpark@infradead.org \
--cc=arnd@arndb.de \
--cc=grant.likely@secretlab.ca \
--cc=kgene.kim@samsung.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.