All of lore.kernel.org
 help / color / mirror / Atom feed
From: Myron Stowe <myron.stowe@redhat.com>
To: bhelgaas@google.com
Cc: linux-pci@vger.kernel.org, rth@twiddle.net,
	ink@jurassic.park.msu.ru, mattst88@gmail.com,
	ralf@linux-mips.org, tglx@linutronix.de, mingo@redhat.com,
	hpa@zytor.com, yinghai@kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH -v2 5/8] MIPS/PCI: Move final fixup quirks from __init to __devinit
Date: Mon, 09 Jul 2012 15:36:27 -0600	[thread overview]
Message-ID: <20120709213627.8975.4902.stgit@amt.stowe> (raw)
In-Reply-To: <20120709213554.8975.60552.stgit@amt.stowe>

The PCI subsystem's final fixups are executed once during boot, after the
pci-device is found.  As long as the system does not support hot-plug,
specifying __init is fine.

With hot-plug, either physically based hot-plug events or pseudo hot-plug
events such as "echo 1 > /sys/bus/pci/rescan", it is possible to remove a
PCI bus during run time and have it rediscovered which will require the
call of the fixups again in order for the device to function properly.

This patch prepares specific quirk(s) for use with hot-plug events.

Signed-off-by: Myron Stowe <myron.stowe@redhat.com>
---

 arch/mips/mti-malta/malta-pci.c |    2 +-
 arch/mips/pci/ops-tx4927.c      |    2 +-
 arch/mips/txx9/generic/pci.c    |    4 ++--
 3 files changed, 4 insertions(+), 4 deletions(-)

diff --git a/arch/mips/mti-malta/malta-pci.c b/arch/mips/mti-malta/malta-pci.c
index bf80921..b663402 100644
--- a/arch/mips/mti-malta/malta-pci.c
+++ b/arch/mips/mti-malta/malta-pci.c
@@ -253,7 +253,7 @@ void __init mips_pcibios_init(void)
 }
 
 /* Enable PCI 2.1 compatibility in PIIX4 */
-static void __init quirk_dlcsetup(struct pci_dev *dev)
+static void __devinit quirk_dlcsetup(struct pci_dev *dev)
 {
 	u8 odlc, ndlc;
 	(void) pci_read_config_byte(dev, 0x82, &odlc);
diff --git a/arch/mips/pci/ops-tx4927.c b/arch/mips/pci/ops-tx4927.c
index a1e7e6d..bc13e29 100644
--- a/arch/mips/pci/ops-tx4927.c
+++ b/arch/mips/pci/ops-tx4927.c
@@ -495,7 +495,7 @@ irqreturn_t tx4927_pcierr_interrupt(int irq, void *dev_id)
 }
 
 #ifdef CONFIG_TOSHIBA_FPCIB0
-static void __init tx4927_quirk_slc90e66_bridge(struct pci_dev *dev)
+static void __devinit tx4927_quirk_slc90e66_bridge(struct pci_dev *dev)
 {
 	struct tx4927_pcic_reg __iomem *pcicptr = pci_bus_to_pcicptr(dev->bus);
 
diff --git a/arch/mips/txx9/generic/pci.c b/arch/mips/txx9/generic/pci.c
index 682efb0..ce1ee50 100644
--- a/arch/mips/txx9/generic/pci.c
+++ b/arch/mips/txx9/generic/pci.c
@@ -256,7 +256,7 @@ static irqreturn_t i8259_interrupt(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static int __init
+static int __devinit
 txx9_i8259_irq_setup(int irq)
 {
 	int err;
@@ -269,7 +269,7 @@ txx9_i8259_irq_setup(int irq)
 	return err;
 }
 
-static void __init quirk_slc90e66_bridge(struct pci_dev *dev)
+static void __devinit quirk_slc90e66_bridge(struct pci_dev *dev)
 {
 	int irq;	/* PCI/ISA Bridge interrupt */
 	u8 reg_64;


  parent reply	other threads:[~2012-07-09 21:36 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-07-09 21:35 [PATCH -v2 0/8] PCI: Add 'pci_fixup_final' quirks into hot-plug paths Myron Stowe
2012-07-09 21:36 ` [PATCH -v2 1/8] PCI: Restructure 'pci_do_fixups()' Myron Stowe
2012-07-09 21:36 ` [PATCH -v2 2/8] PCI: release temporary reference in __nv_msi_ht_cap_quirk() Myron Stowe
2012-07-09 21:36 ` [PATCH -v2 3/8] PCI: Adjust section annotations of various quirks Myron Stowe
2012-07-09 21:36 ` [PATCH -v2 4/8] alpha/PCI: Move final fixup quirks from __init to __devinit Myron Stowe
2012-07-09 21:36 ` Myron Stowe [this message]
2012-07-09 21:36 ` [PATCH -v2 6/8] x86/PCI: " Myron Stowe
2012-07-09 21:36 ` [PATCH -v2 7/8] PCI: " Myron Stowe
2012-07-09 21:36 ` [PATCH -v2 8/8] PCI: Integrate 'pci_fixup_final' quirks into hot-plug paths Myron Stowe
2012-07-10  3:22 ` [PATCH -v2 0/8] PCI: Add " Bjorn Helgaas

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20120709213627.8975.4902.stgit@amt.stowe \
    --to=myron.stowe@redhat.com \
    --cc=bhelgaas@google.com \
    --cc=hpa@zytor.com \
    --cc=ink@jurassic.park.msu.ru \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=mattst88@gmail.com \
    --cc=mingo@redhat.com \
    --cc=ralf@linux-mips.org \
    --cc=rth@twiddle.net \
    --cc=tglx@linutronix.de \
    --cc=yinghai@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.