From: Tony Lindgren <tony@atomide.com> To: linux-arm-kernel@lists.infradead.org Cc: devicetree-discuss@lists.ozlabs.org, linux-omap@vger.kernel.org, Benoit Cousson <b-cousson@ti.com> Subject: [PATCH 1/5] arm/dts: Add omap36xx.dtsi file and rename omap3-beagle to omap3-beagle-xm Date: Thu, 06 Sep 2012 11:58:21 -0700 [thread overview] Message-ID: <20120906185821.1172.18455.stgit@muffinssi.local> (raw) In-Reply-To: <20120906185615.1172.23588.stgit@muffinssi.local> The extra serial port is not available on 34xx. And the current omap3-beagle.dts file is for omap3-beagle-xm.dts as it lists 512MB of memory. Please somebody submit a new omap3-beagle.dts for the original 34xx BeagleBoard after testing it properly. Cc: Benoit Cousson <b-cousson@ti.com> Cc: devicetree-discuss@lists.ozlabs.org Signed-off-by: Tony Lindgren <tony@atomide.com> --- arch/arm/boot/dts/omap3-beagle-xm.dts | 6 +++--- arch/arm/boot/dts/omap3.dtsi | 7 ------- arch/arm/boot/dts/omap36xx.dtsi | 25 +++++++++++++++++++++++++ arch/arm/mach-omap2/Makefile.boot | 2 +- 4 files changed, 29 insertions(+), 11 deletions(-) rename arch/arm/boot/dts/{omap3-beagle.dts => omap3-beagle-xm.dts} (89%) create mode 100644 arch/arm/boot/dts/omap36xx.dtsi diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts similarity index 89% rename from arch/arm/boot/dts/omap3-beagle.dts rename to arch/arm/boot/dts/omap3-beagle-xm.dts index e60cba0..df6d485 100644 --- a/arch/arm/boot/dts/omap3-beagle.dts +++ b/arch/arm/boot/dts/omap3-beagle-xm.dts @@ -7,11 +7,11 @@ */ /dts-v1/; -/include/ "omap3.dtsi" +/include/ "omap36xx.dtsi" / { - model = "TI OMAP3 BeagleBoard"; - compatible = "ti,omap3-beagle", "ti,omap3"; + model = "TI OMAP3 BeagleBoard xM"; + compatible = "ti,omap3-beagle-xm, ti,omap3-beagle", "ti,omap3"; memory { device_type = "memory"; diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi index 8109471..9965ed6 100644 --- a/arch/arm/boot/dts/omap3.dtsi +++ b/arch/arm/boot/dts/omap3.dtsi @@ -17,7 +17,6 @@ serial0 = &uart1; serial1 = &uart2; serial2 = &uart3; - serial3 = &uart4; }; cpus { @@ -141,12 +140,6 @@ clock-frequency = <48000000>; }; - uart4: serial@49042000 { - compatible = "ti,omap3-uart"; - ti,hwmods = "uart4"; - clock-frequency = <48000000>; - }; - i2c1: i2c@48070000 { compatible = "ti,omap3-i2c"; #address-cells = <1>; diff --git a/arch/arm/boot/dts/omap36xx.dtsi b/arch/arm/boot/dts/omap36xx.dtsi new file mode 100644 index 0000000..96bf028 --- /dev/null +++ b/arch/arm/boot/dts/omap36xx.dtsi @@ -0,0 +1,25 @@ +/* + * Device Tree Source for OMAP3 SoC + * + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/include/ "omap3.dtsi" + +/ { + aliases { + serial3 = &uart4; + }; + + ocp { + uart4: serial@49042000 { + compatible = "ti,omap3-uart"; + ti,hwmods = "uart4"; + clock-frequency = <48000000>; + }; + }; +}; diff --git a/arch/arm/mach-omap2/Makefile.boot b/arch/arm/mach-omap2/Makefile.boot index 6cf1c2d..0e602b7 100644 --- a/arch/arm/mach-omap2/Makefile.boot +++ b/arch/arm/mach-omap2/Makefile.boot @@ -3,7 +3,7 @@ params_phys-y := 0x80000100 initrd_phys-y := 0x80800000 dtb-$(CONFIG_SOC_OMAP2420) += omap2420-h4.dtb -dtb-$(CONFIG_ARCH_OMAP3) += omap3-beagle.dtb omap3-evm.dtb +dtb-$(CONFIG_ARCH_OMAP3) += omap3-beagle-xm.dtb omap3-evm.dtb dtb-$(CONFIG_ARCH_OMAP4) += omap4-panda.dtb omap4-pandaES.dtb dtb-$(CONFIG_ARCH_OMAP4) += omap4-var_som.dtb omap4-sdp.dtb dtb-$(CONFIG_SOC_OMAP5) += omap5-evm.dtb
WARNING: multiple messages have this Message-ID (diff)
From: tony@atomide.com (Tony Lindgren) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH 1/5] arm/dts: Add omap36xx.dtsi file and rename omap3-beagle to omap3-beagle-xm Date: Thu, 06 Sep 2012 11:58:21 -0700 [thread overview] Message-ID: <20120906185821.1172.18455.stgit@muffinssi.local> (raw) In-Reply-To: <20120906185615.1172.23588.stgit@muffinssi.local> The extra serial port is not available on 34xx. And the current omap3-beagle.dts file is for omap3-beagle-xm.dts as it lists 512MB of memory. Please somebody submit a new omap3-beagle.dts for the original 34xx BeagleBoard after testing it properly. Cc: Benoit Cousson <b-cousson@ti.com> Cc: devicetree-discuss at lists.ozlabs.org Signed-off-by: Tony Lindgren <tony@atomide.com> --- arch/arm/boot/dts/omap3-beagle-xm.dts | 6 +++--- arch/arm/boot/dts/omap3.dtsi | 7 ------- arch/arm/boot/dts/omap36xx.dtsi | 25 +++++++++++++++++++++++++ arch/arm/mach-omap2/Makefile.boot | 2 +- 4 files changed, 29 insertions(+), 11 deletions(-) rename arch/arm/boot/dts/{omap3-beagle.dts => omap3-beagle-xm.dts} (89%) create mode 100644 arch/arm/boot/dts/omap36xx.dtsi diff --git a/arch/arm/boot/dts/omap3-beagle.dts b/arch/arm/boot/dts/omap3-beagle-xm.dts similarity index 89% rename from arch/arm/boot/dts/omap3-beagle.dts rename to arch/arm/boot/dts/omap3-beagle-xm.dts index e60cba0..df6d485 100644 --- a/arch/arm/boot/dts/omap3-beagle.dts +++ b/arch/arm/boot/dts/omap3-beagle-xm.dts @@ -7,11 +7,11 @@ */ /dts-v1/; -/include/ "omap3.dtsi" +/include/ "omap36xx.dtsi" / { - model = "TI OMAP3 BeagleBoard"; - compatible = "ti,omap3-beagle", "ti,omap3"; + model = "TI OMAP3 BeagleBoard xM"; + compatible = "ti,omap3-beagle-xm, ti,omap3-beagle", "ti,omap3"; memory { device_type = "memory"; diff --git a/arch/arm/boot/dts/omap3.dtsi b/arch/arm/boot/dts/omap3.dtsi index 8109471..9965ed6 100644 --- a/arch/arm/boot/dts/omap3.dtsi +++ b/arch/arm/boot/dts/omap3.dtsi @@ -17,7 +17,6 @@ serial0 = &uart1; serial1 = &uart2; serial2 = &uart3; - serial3 = &uart4; }; cpus { @@ -141,12 +140,6 @@ clock-frequency = <48000000>; }; - uart4: serial at 49042000 { - compatible = "ti,omap3-uart"; - ti,hwmods = "uart4"; - clock-frequency = <48000000>; - }; - i2c1: i2c at 48070000 { compatible = "ti,omap3-i2c"; #address-cells = <1>; diff --git a/arch/arm/boot/dts/omap36xx.dtsi b/arch/arm/boot/dts/omap36xx.dtsi new file mode 100644 index 0000000..96bf028 --- /dev/null +++ b/arch/arm/boot/dts/omap36xx.dtsi @@ -0,0 +1,25 @@ +/* + * Device Tree Source for OMAP3 SoC + * + * Copyright (C) 2012 Texas Instruments Incorporated - http://www.ti.com/ + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/include/ "omap3.dtsi" + +/ { + aliases { + serial3 = &uart4; + }; + + ocp { + uart4: serial at 49042000 { + compatible = "ti,omap3-uart"; + ti,hwmods = "uart4"; + clock-frequency = <48000000>; + }; + }; +}; diff --git a/arch/arm/mach-omap2/Makefile.boot b/arch/arm/mach-omap2/Makefile.boot index 6cf1c2d..0e602b7 100644 --- a/arch/arm/mach-omap2/Makefile.boot +++ b/arch/arm/mach-omap2/Makefile.boot @@ -3,7 +3,7 @@ params_phys-y := 0x80000100 initrd_phys-y := 0x80800000 dtb-$(CONFIG_SOC_OMAP2420) += omap2420-h4.dtb -dtb-$(CONFIG_ARCH_OMAP3) += omap3-beagle.dtb omap3-evm.dtb +dtb-$(CONFIG_ARCH_OMAP3) += omap3-beagle-xm.dtb omap3-evm.dtb dtb-$(CONFIG_ARCH_OMAP4) += omap4-panda.dtb omap4-pandaES.dtb dtb-$(CONFIG_ARCH_OMAP4) += omap4-var_som.dtb omap4-sdp.dtb dtb-$(CONFIG_SOC_OMAP5) += omap5-evm.dtb
next prev parent reply other threads:[~2012-09-06 18:58 UTC|newest] Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top 2012-09-06 18:58 [PATCH 0/5] Enable pinctrl-single for omap2/3/4 Tony Lindgren 2012-09-06 18:58 ` Tony Lindgren 2012-09-06 18:58 ` Tony Lindgren [this message] 2012-09-06 18:58 ` [PATCH 1/5] arm/dts: Add omap36xx.dtsi file and rename omap3-beagle to omap3-beagle-xm Tony Lindgren 2012-09-07 15:49 ` Benoit Cousson 2012-09-07 15:49 ` Benoit Cousson 2012-09-06 18:58 ` [PATCH 2/5] arm/dts: Add pinctrl driver entries for omap2/3/4 Tony Lindgren 2012-09-06 18:58 ` Tony Lindgren 2012-09-07 8:10 ` Linus Walleij 2012-09-07 8:10 ` Linus Walleij 2012-09-06 18:58 ` [PATCH 3/5] ARM: OMAP2+: select PINCTRL in Kconfig Tony Lindgren 2012-09-06 18:58 ` Tony Lindgren 2012-09-06 18:58 ` [PATCH 4/5] arm/dts: Mux uart pins for omap4-sdp Tony Lindgren 2012-09-06 18:58 ` Tony Lindgren 2012-09-06 18:58 ` [PATCH 5/5] omap-serial: Request pins using pinctrl framework Tony Lindgren 2012-09-06 18:58 ` Tony Lindgren 2012-09-06 19:12 ` Tony Lindgren 2012-09-06 19:12 ` Tony Lindgren 2012-09-06 19:56 ` Felipe Balbi 2012-09-06 19:56 ` Felipe Balbi 2012-09-06 21:17 ` Tony Lindgren 2012-09-06 21:17 ` Tony Lindgren 2012-09-07 5:26 ` Felipe Balbi 2012-09-07 5:26 ` Felipe Balbi 2012-09-07 3:27 ` AnilKumar, Chimata 2012-09-07 3:27 ` AnilKumar, Chimata 2012-09-07 17:28 ` Tony Lindgren 2012-09-07 17:28 ` Tony Lindgren 2012-09-07 18:03 ` Tony Lindgren 2012-09-07 18:03 ` Tony Lindgren
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20120906185821.1172.18455.stgit@muffinssi.local \ --to=tony@atomide.com \ --cc=b-cousson@ti.com \ --cc=devicetree-discuss@lists.ozlabs.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-omap@vger.kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.