All of lore.kernel.org
 help / color / mirror / Atom feed
From: Tony Lindgren <tony@atomide.com>
To: linux-arm-kernel@lists.infradead.org
Cc: Grant Likely <grant.likely@secretlab.ca>,
	Peter Ujfalusi <peter.ujfalusi@ti.com>,
	Linus Walleij <linus.walleij@linaro.org>,
	linux-omap@vger.kernel.org, Samuel Ortiz <sameo@linux.intel.com>
Subject: [PATCH 05/17] ARM: OMAP2+: Remove hardcoded twl4030 gpio_base, irq_base and irq_end
Date: Mon, 10 Sep 2012 22:30:53 -0700	[thread overview]
Message-ID: <20120911053052.29637.74323.stgit@muffinssi.local> (raw)
In-Reply-To: <20120911052934.29637.9190.stgit@muffinssi.local>

We can't use hardcoded interrupts for SPARSE_IRQ, and can replace
the hardcoded gpio_base with twl_gpiochip.base after it's been
allocated.

Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Samuel Ortiz <sameo@linux.intel.com>
Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/board-2430sdp.c          |    3 ---
 arch/arm/mach-omap2/board-3430sdp.c          |    3 ---
 arch/arm/mach-omap2/board-4430sdp.c          |    1 -
 arch/arm/mach-omap2/board-cm-t35.c           |    3 ---
 arch/arm/mach-omap2/board-devkit8000.c       |    3 ---
 arch/arm/mach-omap2/board-igep0020.c         |    3 ---
 arch/arm/mach-omap2/board-ldp.c              |    3 ---
 arch/arm/mach-omap2/board-omap3beagle.c      |    3 ---
 arch/arm/mach-omap2/board-omap3evm.c         |    3 ---
 arch/arm/mach-omap2/board-omap3logic.c       |    3 ---
 arch/arm/mach-omap2/board-omap3pandora.c     |    3 ---
 arch/arm/mach-omap2/board-omap3stalker.c     |    3 ---
 arch/arm/mach-omap2/board-omap3touchbook.c   |    3 ---
 arch/arm/mach-omap2/board-omap4panda.c       |    1 -
 arch/arm/mach-omap2/board-overo.c            |    3 ---
 arch/arm/mach-omap2/board-rm680.c            |    3 ---
 arch/arm/mach-omap2/board-rx51-peripherals.c |    3 ---
 arch/arm/mach-omap2/board-zoom-peripherals.c |    3 ---
 drivers/gpio/gpio-twl4030.c                  |   15 ++++++++++-----
 include/linux/i2c/twl.h                      |    3 ---
 include/linux/mfd/twl6040.h                  |    1 -
 21 files changed, 10 insertions(+), 59 deletions(-)

diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c
index 36eee4b..cacc498 100644
--- a/arch/arm/mach-omap2/board-2430sdp.c
+++ b/arch/arm/mach-omap2/board-2430sdp.c
@@ -211,9 +211,6 @@ static struct regulator_init_data sdp2430_vmmc1 = {
 };
 
 static struct twl4030_gpio_platform_data sdp2430_gpio_data = {
-	.gpio_base	= OMAP_MAX_GPIO_LINES,
-	.irq_base	= TWL4030_GPIO_IRQ_BASE,
-	.irq_end	= TWL4030_GPIO_IRQ_END,
 };
 
 static struct twl4030_platform_data sdp2430_twldata = {
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index 0f78cdb..c843d01 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -229,9 +229,6 @@ static int sdp3430_twl_gpio_setup(struct device *dev,
 }
 
 static struct twl4030_gpio_platform_data sdp3430_gpio_data = {
-	.gpio_base	= OMAP_MAX_GPIO_LINES,
-	.irq_base	= TWL4030_GPIO_IRQ_BASE,
-	.irq_end	= TWL4030_GPIO_IRQ_END,
 	.pulldowns	= BIT(2) | BIT(6) | BIT(8) | BIT(13)
 				| BIT(16) | BIT(17),
 	.setup		= sdp3430_twl_gpio_setup,
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
index 04e8574..ee82604 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -543,7 +543,6 @@ static struct twl6040_platform_data twl6040_data = {
 	.codec		= &twl6040_codec,
 	.vibra		= &twl6040_vibra,
 	.audpwron_gpio	= 127,
-	.irq_base	= TWL6040_CODEC_IRQ_BASE,
 };
 
 static struct twl4030_platform_data sdp4430_twldata = {
diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c
index d94a640..ea34109 100644
--- a/arch/arm/mach-omap2/board-cm-t35.c
+++ b/arch/arm/mach-omap2/board-cm-t35.c
@@ -469,9 +469,6 @@ static int cm_t35_twl_gpio_setup(struct device *dev, unsigned gpio,
 }
 
 static struct twl4030_gpio_platform_data cm_t35_gpio_data = {
-	.gpio_base	= OMAP_MAX_GPIO_LINES,
-	.irq_base	= TWL4030_GPIO_IRQ_BASE,
-	.irq_end	= TWL4030_GPIO_IRQ_END,
 	.setup          = cm_t35_twl_gpio_setup,
 };
 
diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c
index 870a2a5..9032807 100644
--- a/arch/arm/mach-omap2/board-devkit8000.c
+++ b/arch/arm/mach-omap2/board-devkit8000.c
@@ -235,9 +235,6 @@ static int devkit8000_twl_gpio_setup(struct device *dev,
 }
 
 static struct twl4030_gpio_platform_data devkit8000_gpio_data = {
-	.gpio_base	= OMAP_MAX_GPIO_LINES,
-	.irq_base	= TWL4030_GPIO_IRQ_BASE,
-	.irq_end	= TWL4030_GPIO_IRQ_END,
 	.use_leds	= true,
 	.pulldowns	= BIT(1) | BIT(2) | BIT(6) | BIT(8) | BIT(13)
 				| BIT(15) | BIT(16) | BIT(17),
diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c
index 01103b3..5775549 100644
--- a/arch/arm/mach-omap2/board-igep0020.c
+++ b/arch/arm/mach-omap2/board-igep0020.c
@@ -424,9 +424,6 @@ static int igep_twl_gpio_setup(struct device *dev,
 };
 
 static struct twl4030_gpio_platform_data igep_twl4030_gpio_pdata = {
-	.gpio_base	= OMAP_MAX_GPIO_LINES,
-	.irq_base	= TWL4030_GPIO_IRQ_BASE,
-	.irq_end	= TWL4030_GPIO_IRQ_END,
 	.use_leds	= true,
 	.setup		= igep_twl_gpio_setup,
 };
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index c37c2a1..bea2e3a 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -274,9 +274,6 @@ static int ldp_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio)
 }
 
 static struct twl4030_gpio_platform_data ldp_gpio_data = {
-	.gpio_base	= OMAP_MAX_GPIO_LINES,
-	.irq_base	= TWL4030_GPIO_IRQ_BASE,
-	.irq_end	= TWL4030_GPIO_IRQ_END,
 	.setup		= ldp_twl_gpio_setup,
 };
 
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 293e3b2..9d9b2ab 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -296,9 +296,6 @@ static int beagle_twl_gpio_setup(struct device *dev,
 }
 
 static struct twl4030_gpio_platform_data beagle_gpio_data = {
-	.gpio_base	= OMAP_MAX_GPIO_LINES,
-	.irq_base	= TWL4030_GPIO_IRQ_BASE,
-	.irq_end	= TWL4030_GPIO_IRQ_END,
 	.use_leds	= true,
 	.pullups	= BIT(1),
 	.pulldowns	= BIT(2) | BIT(6) | BIT(7) | BIT(8) | BIT(13)
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index 851aec6..493bd96 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -388,9 +388,6 @@ static int omap3evm_twl_gpio_setup(struct device *dev,
 }
 
 static struct twl4030_gpio_platform_data omap3evm_gpio_data = {
-	.gpio_base	= OMAP_MAX_GPIO_LINES,
-	.irq_base	= TWL4030_GPIO_IRQ_BASE,
-	.irq_end	= TWL4030_GPIO_IRQ_END,
 	.use_leds	= true,
 	.setup		= omap3evm_twl_gpio_setup,
 };
diff --git a/arch/arm/mach-omap2/board-omap3logic.c b/arch/arm/mach-omap2/board-omap3logic.c
index a63a49d..8fe7f0c 100644
--- a/arch/arm/mach-omap2/board-omap3logic.c
+++ b/arch/arm/mach-omap2/board-omap3logic.c
@@ -77,9 +77,6 @@ static struct regulator_init_data omap3logic_vmmc1 = {
 };
 
 static struct twl4030_gpio_platform_data omap3logic_gpio_data = {
-	.gpio_base	= OMAP_MAX_GPIO_LINES,
-	.irq_base	= TWL4030_GPIO_IRQ_BASE,
-	.irq_end	= TWL4030_GPIO_IRQ_END,
 	.use_leds	= true,
 	.pullups	= BIT(1),
 	.pulldowns	= BIT(2)  | BIT(6)  | BIT(7)  | BIT(8)
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index 633c445..38521d4 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -320,9 +320,6 @@ static int omap3pandora_twl_gpio_setup(struct device *dev,
 }
 
 static struct twl4030_gpio_platform_data omap3pandora_gpio_data = {
-	.gpio_base	= OMAP_MAX_GPIO_LINES,
-	.irq_base	= TWL4030_GPIO_IRQ_BASE,
-	.irq_end	= TWL4030_GPIO_IRQ_END,
 	.setup		= omap3pandora_twl_gpio_setup,
 };
 
diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c
index 421fb8e..87aa5b1 100644
--- a/arch/arm/mach-omap2/board-omap3stalker.c
+++ b/arch/arm/mach-omap2/board-omap3stalker.c
@@ -278,9 +278,6 @@ omap3stalker_twl_gpio_setup(struct device *dev,
 }
 
 static struct twl4030_gpio_platform_data omap3stalker_gpio_data = {
-	.gpio_base	= OMAP_MAX_GPIO_LINES,
-	.irq_base	= TWL4030_GPIO_IRQ_BASE,
-	.irq_end	= TWL4030_GPIO_IRQ_END,
 	.use_leds	= true,
 	.setup		= omap3stalker_twl_gpio_setup,
 };
diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c
index d3556c9..88dc913 100644
--- a/arch/arm/mach-omap2/board-omap3touchbook.c
+++ b/arch/arm/mach-omap2/board-omap3touchbook.c
@@ -138,9 +138,6 @@ static int touchbook_twl_gpio_setup(struct device *dev,
 }
 
 static struct twl4030_gpio_platform_data touchbook_gpio_data = {
-	.gpio_base	= OMAP_MAX_GPIO_LINES,
-	.irq_base	= TWL4030_GPIO_IRQ_BASE,
-	.irq_end	= TWL4030_GPIO_IRQ_END,
 	.use_leds	= true,
 	.pullups	= BIT(1),
 	.pulldowns	= BIT(2) | BIT(6) | BIT(7) | BIT(8) | BIT(13)
diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c
index 3911c13..e37ee67 100644
--- a/arch/arm/mach-omap2/board-omap4panda.c
+++ b/arch/arm/mach-omap2/board-omap4panda.c
@@ -262,7 +262,6 @@ static struct twl6040_codec_data twl6040_codec = {
 static struct twl6040_platform_data twl6040_data = {
 	.codec		= &twl6040_codec,
 	.audpwron_gpio	= 127,
-	.irq_base	= TWL6040_CODEC_IRQ_BASE,
 };
 
 /* Panda board uses the common PMIC configuration */
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index 193d160..4754f05 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -398,9 +398,6 @@ static int overo_twl_gpio_setup(struct device *dev,
 }
 
 static struct twl4030_gpio_platform_data overo_gpio_data = {
-	.gpio_base	= OMAP_MAX_GPIO_LINES,
-	.irq_base	= TWL4030_GPIO_IRQ_BASE,
-	.irq_end	= TWL4030_GPIO_IRQ_END,
 	.use_leds	= true,
 	.setup		= overo_twl_gpio_setup,
 };
diff --git a/arch/arm/mach-omap2/board-rm680.c b/arch/arm/mach-omap2/board-rm680.c
index 0ad1bb3b..12411b9 100644
--- a/arch/arm/mach-omap2/board-rm680.c
+++ b/arch/arm/mach-omap2/board-rm680.c
@@ -72,9 +72,6 @@ static struct platform_device *rm680_peripherals_devices[] __initdata = {
 
 /* TWL */
 static struct twl4030_gpio_platform_data rm680_gpio_data = {
-	.gpio_base		= OMAP_MAX_GPIO_LINES,
-	.irq_base		= TWL4030_GPIO_IRQ_BASE,
-	.irq_end		= TWL4030_GPIO_IRQ_END,
 	.pullups		= BIT(0),
 	.pulldowns		= BIT(1) | BIT(2) | BIT(8) | BIT(15),
 };
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index 3b9fc61..e8b6dda 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -773,9 +773,6 @@ static int rx51_twlgpio_setup(struct device *dev, unsigned gpio, unsigned n)
 }
 
 static struct twl4030_gpio_platform_data rx51_gpio_data = {
-	.gpio_base		= OMAP_MAX_GPIO_LINES,
-	.irq_base		= TWL4030_GPIO_IRQ_BASE,
-	.irq_end		= TWL4030_GPIO_IRQ_END,
 	.pulldowns		= BIT(0) | BIT(1) | BIT(2) | BIT(3)
 				| BIT(4) | BIT(5)
 				| BIT(8) | BIT(9) | BIT(10) | BIT(11)
diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c
index b797cb2..00f73b7 100644
--- a/arch/arm/mach-omap2/board-zoom-peripherals.c
+++ b/arch/arm/mach-omap2/board-zoom-peripherals.c
@@ -251,9 +251,6 @@ static void zoom2_set_hs_extmute(int mute)
 }
 
 static struct twl4030_gpio_platform_data zoom_gpio_data = {
-	.gpio_base	= OMAP_MAX_GPIO_LINES,
-	.irq_base	= TWL4030_GPIO_IRQ_BASE,
-	.irq_end	= TWL4030_GPIO_IRQ_END,
 	.setup		= zoom_twl_gpio_setup,
 };
 
diff --git a/drivers/gpio/gpio-twl4030.c b/drivers/gpio/gpio-twl4030.c
index 94256fe..f030880 100644
--- a/drivers/gpio/gpio-twl4030.c
+++ b/drivers/gpio/gpio-twl4030.c
@@ -51,6 +51,7 @@
 
 
 static struct gpio_chip twl_gpiochip;
+static int twl4030_gpio_base;
 static int twl4030_gpio_irq_base;
 
 /* genirq interfaces are not available to modules */
@@ -428,8 +429,6 @@ no_irqs:
 	twl_gpiochip.dev = &pdev->dev;
 
 	if (pdata) {
-		twl_gpiochip.base = pdata->gpio_base;
-
 		/*
 		 * NOTE:  boards may waste power if they don't set pullups
 		 * and pulldowns correctly ... default for non-ULPI pins is
@@ -461,15 +460,21 @@ no_irqs:
 		dev_err(&pdev->dev, "could not register gpiochip, %d\n", ret);
 		twl_gpiochip.ngpio = 0;
 		gpio_twl4030_remove(pdev);
-	} else if (pdata && pdata->setup) {
+		goto out;
+	}
+
+	twl4030_gpio_base = twl_gpiochip.base;
+
+	if (pdata && pdata->setup) {
 		int status;
 
 		status = pdata->setup(&pdev->dev,
-				pdata->gpio_base, TWL4030_GPIO_MAX);
+				twl4030_gpio_base, TWL4030_GPIO_MAX);
 		if (status)
 			dev_dbg(&pdev->dev, "setup --> %d\n", status);
 	}
 
+out:
 	return ret;
 }
 
@@ -481,7 +486,7 @@ static int gpio_twl4030_remove(struct platform_device *pdev)
 
 	if (pdata && pdata->teardown) {
 		status = pdata->teardown(&pdev->dev,
-				pdata->gpio_base, TWL4030_GPIO_MAX);
+				twl4030_gpio_base, TWL4030_GPIO_MAX);
 		if (status) {
 			dev_dbg(&pdev->dev, "teardown --> %d\n", status);
 			return status;
diff --git a/include/linux/i2c/twl.h b/include/linux/i2c/twl.h
index 7ea898c..a12a381 100644
--- a/include/linux/i2c/twl.h
+++ b/include/linux/i2c/twl.h
@@ -561,9 +561,6 @@ struct twl4030_bci_platform_data {
 
 /* TWL4030_GPIO_MAX (18) GPIOs, with interrupts */
 struct twl4030_gpio_platform_data {
-	int		gpio_base;
-	unsigned	irq_base, irq_end;
-
 	/* package the two LED signals as output-only GPIOs? */
 	bool		use_leds;
 
diff --git a/include/linux/mfd/twl6040.h b/include/linux/mfd/twl6040.h
index eaad49f..ba43d48 100644
--- a/include/linux/mfd/twl6040.h
+++ b/include/linux/mfd/twl6040.h
@@ -194,7 +194,6 @@ struct twl6040_vibra_data {
 
 struct twl6040_platform_data {
 	int audpwron_gpio;	/* audio power-on gpio */
-	unsigned int irq_base;
 
 	struct twl6040_codec_data *codec;
 	struct twl6040_vibra_data *vibra;


WARNING: multiple messages have this Message-ID (diff)
From: tony@atomide.com (Tony Lindgren)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 05/17] ARM: OMAP2+: Remove hardcoded twl4030 gpio_base, irq_base and irq_end
Date: Mon, 10 Sep 2012 22:30:53 -0700	[thread overview]
Message-ID: <20120911053052.29637.74323.stgit@muffinssi.local> (raw)
In-Reply-To: <20120911052934.29637.9190.stgit@muffinssi.local>

We can't use hardcoded interrupts for SPARSE_IRQ, and can replace
the hardcoded gpio_base with twl_gpiochip.base after it's been
allocated.

Cc: Grant Likely <grant.likely@secretlab.ca>
Cc: Samuel Ortiz <sameo@linux.intel.com>
Cc: Peter Ujfalusi <peter.ujfalusi@ti.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 arch/arm/mach-omap2/board-2430sdp.c          |    3 ---
 arch/arm/mach-omap2/board-3430sdp.c          |    3 ---
 arch/arm/mach-omap2/board-4430sdp.c          |    1 -
 arch/arm/mach-omap2/board-cm-t35.c           |    3 ---
 arch/arm/mach-omap2/board-devkit8000.c       |    3 ---
 arch/arm/mach-omap2/board-igep0020.c         |    3 ---
 arch/arm/mach-omap2/board-ldp.c              |    3 ---
 arch/arm/mach-omap2/board-omap3beagle.c      |    3 ---
 arch/arm/mach-omap2/board-omap3evm.c         |    3 ---
 arch/arm/mach-omap2/board-omap3logic.c       |    3 ---
 arch/arm/mach-omap2/board-omap3pandora.c     |    3 ---
 arch/arm/mach-omap2/board-omap3stalker.c     |    3 ---
 arch/arm/mach-omap2/board-omap3touchbook.c   |    3 ---
 arch/arm/mach-omap2/board-omap4panda.c       |    1 -
 arch/arm/mach-omap2/board-overo.c            |    3 ---
 arch/arm/mach-omap2/board-rm680.c            |    3 ---
 arch/arm/mach-omap2/board-rx51-peripherals.c |    3 ---
 arch/arm/mach-omap2/board-zoom-peripherals.c |    3 ---
 drivers/gpio/gpio-twl4030.c                  |   15 ++++++++++-----
 include/linux/i2c/twl.h                      |    3 ---
 include/linux/mfd/twl6040.h                  |    1 -
 21 files changed, 10 insertions(+), 59 deletions(-)

diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c
index 36eee4b..cacc498 100644
--- a/arch/arm/mach-omap2/board-2430sdp.c
+++ b/arch/arm/mach-omap2/board-2430sdp.c
@@ -211,9 +211,6 @@ static struct regulator_init_data sdp2430_vmmc1 = {
 };
 
 static struct twl4030_gpio_platform_data sdp2430_gpio_data = {
-	.gpio_base	= OMAP_MAX_GPIO_LINES,
-	.irq_base	= TWL4030_GPIO_IRQ_BASE,
-	.irq_end	= TWL4030_GPIO_IRQ_END,
 };
 
 static struct twl4030_platform_data sdp2430_twldata = {
diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c
index 0f78cdb..c843d01 100644
--- a/arch/arm/mach-omap2/board-3430sdp.c
+++ b/arch/arm/mach-omap2/board-3430sdp.c
@@ -229,9 +229,6 @@ static int sdp3430_twl_gpio_setup(struct device *dev,
 }
 
 static struct twl4030_gpio_platform_data sdp3430_gpio_data = {
-	.gpio_base	= OMAP_MAX_GPIO_LINES,
-	.irq_base	= TWL4030_GPIO_IRQ_BASE,
-	.irq_end	= TWL4030_GPIO_IRQ_END,
 	.pulldowns	= BIT(2) | BIT(6) | BIT(8) | BIT(13)
 				| BIT(16) | BIT(17),
 	.setup		= sdp3430_twl_gpio_setup,
diff --git a/arch/arm/mach-omap2/board-4430sdp.c b/arch/arm/mach-omap2/board-4430sdp.c
index 04e8574..ee82604 100644
--- a/arch/arm/mach-omap2/board-4430sdp.c
+++ b/arch/arm/mach-omap2/board-4430sdp.c
@@ -543,7 +543,6 @@ static struct twl6040_platform_data twl6040_data = {
 	.codec		= &twl6040_codec,
 	.vibra		= &twl6040_vibra,
 	.audpwron_gpio	= 127,
-	.irq_base	= TWL6040_CODEC_IRQ_BASE,
 };
 
 static struct twl4030_platform_data sdp4430_twldata = {
diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c
index d94a640..ea34109 100644
--- a/arch/arm/mach-omap2/board-cm-t35.c
+++ b/arch/arm/mach-omap2/board-cm-t35.c
@@ -469,9 +469,6 @@ static int cm_t35_twl_gpio_setup(struct device *dev, unsigned gpio,
 }
 
 static struct twl4030_gpio_platform_data cm_t35_gpio_data = {
-	.gpio_base	= OMAP_MAX_GPIO_LINES,
-	.irq_base	= TWL4030_GPIO_IRQ_BASE,
-	.irq_end	= TWL4030_GPIO_IRQ_END,
 	.setup          = cm_t35_twl_gpio_setup,
 };
 
diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c
index 870a2a5..9032807 100644
--- a/arch/arm/mach-omap2/board-devkit8000.c
+++ b/arch/arm/mach-omap2/board-devkit8000.c
@@ -235,9 +235,6 @@ static int devkit8000_twl_gpio_setup(struct device *dev,
 }
 
 static struct twl4030_gpio_platform_data devkit8000_gpio_data = {
-	.gpio_base	= OMAP_MAX_GPIO_LINES,
-	.irq_base	= TWL4030_GPIO_IRQ_BASE,
-	.irq_end	= TWL4030_GPIO_IRQ_END,
 	.use_leds	= true,
 	.pulldowns	= BIT(1) | BIT(2) | BIT(6) | BIT(8) | BIT(13)
 				| BIT(15) | BIT(16) | BIT(17),
diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c
index 01103b3..5775549 100644
--- a/arch/arm/mach-omap2/board-igep0020.c
+++ b/arch/arm/mach-omap2/board-igep0020.c
@@ -424,9 +424,6 @@ static int igep_twl_gpio_setup(struct device *dev,
 };
 
 static struct twl4030_gpio_platform_data igep_twl4030_gpio_pdata = {
-	.gpio_base	= OMAP_MAX_GPIO_LINES,
-	.irq_base	= TWL4030_GPIO_IRQ_BASE,
-	.irq_end	= TWL4030_GPIO_IRQ_END,
 	.use_leds	= true,
 	.setup		= igep_twl_gpio_setup,
 };
diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c
index c37c2a1..bea2e3a 100644
--- a/arch/arm/mach-omap2/board-ldp.c
+++ b/arch/arm/mach-omap2/board-ldp.c
@@ -274,9 +274,6 @@ static int ldp_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio)
 }
 
 static struct twl4030_gpio_platform_data ldp_gpio_data = {
-	.gpio_base	= OMAP_MAX_GPIO_LINES,
-	.irq_base	= TWL4030_GPIO_IRQ_BASE,
-	.irq_end	= TWL4030_GPIO_IRQ_END,
 	.setup		= ldp_twl_gpio_setup,
 };
 
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 293e3b2..9d9b2ab 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -296,9 +296,6 @@ static int beagle_twl_gpio_setup(struct device *dev,
 }
 
 static struct twl4030_gpio_platform_data beagle_gpio_data = {
-	.gpio_base	= OMAP_MAX_GPIO_LINES,
-	.irq_base	= TWL4030_GPIO_IRQ_BASE,
-	.irq_end	= TWL4030_GPIO_IRQ_END,
 	.use_leds	= true,
 	.pullups	= BIT(1),
 	.pulldowns	= BIT(2) | BIT(6) | BIT(7) | BIT(8) | BIT(13)
diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c
index 851aec6..493bd96 100644
--- a/arch/arm/mach-omap2/board-omap3evm.c
+++ b/arch/arm/mach-omap2/board-omap3evm.c
@@ -388,9 +388,6 @@ static int omap3evm_twl_gpio_setup(struct device *dev,
 }
 
 static struct twl4030_gpio_platform_data omap3evm_gpio_data = {
-	.gpio_base	= OMAP_MAX_GPIO_LINES,
-	.irq_base	= TWL4030_GPIO_IRQ_BASE,
-	.irq_end	= TWL4030_GPIO_IRQ_END,
 	.use_leds	= true,
 	.setup		= omap3evm_twl_gpio_setup,
 };
diff --git a/arch/arm/mach-omap2/board-omap3logic.c b/arch/arm/mach-omap2/board-omap3logic.c
index a63a49d..8fe7f0c 100644
--- a/arch/arm/mach-omap2/board-omap3logic.c
+++ b/arch/arm/mach-omap2/board-omap3logic.c
@@ -77,9 +77,6 @@ static struct regulator_init_data omap3logic_vmmc1 = {
 };
 
 static struct twl4030_gpio_platform_data omap3logic_gpio_data = {
-	.gpio_base	= OMAP_MAX_GPIO_LINES,
-	.irq_base	= TWL4030_GPIO_IRQ_BASE,
-	.irq_end	= TWL4030_GPIO_IRQ_END,
 	.use_leds	= true,
 	.pullups	= BIT(1),
 	.pulldowns	= BIT(2)  | BIT(6)  | BIT(7)  | BIT(8)
diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c
index 633c445..38521d4 100644
--- a/arch/arm/mach-omap2/board-omap3pandora.c
+++ b/arch/arm/mach-omap2/board-omap3pandora.c
@@ -320,9 +320,6 @@ static int omap3pandora_twl_gpio_setup(struct device *dev,
 }
 
 static struct twl4030_gpio_platform_data omap3pandora_gpio_data = {
-	.gpio_base	= OMAP_MAX_GPIO_LINES,
-	.irq_base	= TWL4030_GPIO_IRQ_BASE,
-	.irq_end	= TWL4030_GPIO_IRQ_END,
 	.setup		= omap3pandora_twl_gpio_setup,
 };
 
diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c
index 421fb8e..87aa5b1 100644
--- a/arch/arm/mach-omap2/board-omap3stalker.c
+++ b/arch/arm/mach-omap2/board-omap3stalker.c
@@ -278,9 +278,6 @@ omap3stalker_twl_gpio_setup(struct device *dev,
 }
 
 static struct twl4030_gpio_platform_data omap3stalker_gpio_data = {
-	.gpio_base	= OMAP_MAX_GPIO_LINES,
-	.irq_base	= TWL4030_GPIO_IRQ_BASE,
-	.irq_end	= TWL4030_GPIO_IRQ_END,
 	.use_leds	= true,
 	.setup		= omap3stalker_twl_gpio_setup,
 };
diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c
index d3556c9..88dc913 100644
--- a/arch/arm/mach-omap2/board-omap3touchbook.c
+++ b/arch/arm/mach-omap2/board-omap3touchbook.c
@@ -138,9 +138,6 @@ static int touchbook_twl_gpio_setup(struct device *dev,
 }
 
 static struct twl4030_gpio_platform_data touchbook_gpio_data = {
-	.gpio_base	= OMAP_MAX_GPIO_LINES,
-	.irq_base	= TWL4030_GPIO_IRQ_BASE,
-	.irq_end	= TWL4030_GPIO_IRQ_END,
 	.use_leds	= true,
 	.pullups	= BIT(1),
 	.pulldowns	= BIT(2) | BIT(6) | BIT(7) | BIT(8) | BIT(13)
diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c
index 3911c13..e37ee67 100644
--- a/arch/arm/mach-omap2/board-omap4panda.c
+++ b/arch/arm/mach-omap2/board-omap4panda.c
@@ -262,7 +262,6 @@ static struct twl6040_codec_data twl6040_codec = {
 static struct twl6040_platform_data twl6040_data = {
 	.codec		= &twl6040_codec,
 	.audpwron_gpio	= 127,
-	.irq_base	= TWL6040_CODEC_IRQ_BASE,
 };
 
 /* Panda board uses the common PMIC configuration */
diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c
index 193d160..4754f05 100644
--- a/arch/arm/mach-omap2/board-overo.c
+++ b/arch/arm/mach-omap2/board-overo.c
@@ -398,9 +398,6 @@ static int overo_twl_gpio_setup(struct device *dev,
 }
 
 static struct twl4030_gpio_platform_data overo_gpio_data = {
-	.gpio_base	= OMAP_MAX_GPIO_LINES,
-	.irq_base	= TWL4030_GPIO_IRQ_BASE,
-	.irq_end	= TWL4030_GPIO_IRQ_END,
 	.use_leds	= true,
 	.setup		= overo_twl_gpio_setup,
 };
diff --git a/arch/arm/mach-omap2/board-rm680.c b/arch/arm/mach-omap2/board-rm680.c
index 0ad1bb3b..12411b9 100644
--- a/arch/arm/mach-omap2/board-rm680.c
+++ b/arch/arm/mach-omap2/board-rm680.c
@@ -72,9 +72,6 @@ static struct platform_device *rm680_peripherals_devices[] __initdata = {
 
 /* TWL */
 static struct twl4030_gpio_platform_data rm680_gpio_data = {
-	.gpio_base		= OMAP_MAX_GPIO_LINES,
-	.irq_base		= TWL4030_GPIO_IRQ_BASE,
-	.irq_end		= TWL4030_GPIO_IRQ_END,
 	.pullups		= BIT(0),
 	.pulldowns		= BIT(1) | BIT(2) | BIT(8) | BIT(15),
 };
diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c
index 3b9fc61..e8b6dda 100644
--- a/arch/arm/mach-omap2/board-rx51-peripherals.c
+++ b/arch/arm/mach-omap2/board-rx51-peripherals.c
@@ -773,9 +773,6 @@ static int rx51_twlgpio_setup(struct device *dev, unsigned gpio, unsigned n)
 }
 
 static struct twl4030_gpio_platform_data rx51_gpio_data = {
-	.gpio_base		= OMAP_MAX_GPIO_LINES,
-	.irq_base		= TWL4030_GPIO_IRQ_BASE,
-	.irq_end		= TWL4030_GPIO_IRQ_END,
 	.pulldowns		= BIT(0) | BIT(1) | BIT(2) | BIT(3)
 				| BIT(4) | BIT(5)
 				| BIT(8) | BIT(9) | BIT(10) | BIT(11)
diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c
index b797cb2..00f73b7 100644
--- a/arch/arm/mach-omap2/board-zoom-peripherals.c
+++ b/arch/arm/mach-omap2/board-zoom-peripherals.c
@@ -251,9 +251,6 @@ static void zoom2_set_hs_extmute(int mute)
 }
 
 static struct twl4030_gpio_platform_data zoom_gpio_data = {
-	.gpio_base	= OMAP_MAX_GPIO_LINES,
-	.irq_base	= TWL4030_GPIO_IRQ_BASE,
-	.irq_end	= TWL4030_GPIO_IRQ_END,
 	.setup		= zoom_twl_gpio_setup,
 };
 
diff --git a/drivers/gpio/gpio-twl4030.c b/drivers/gpio/gpio-twl4030.c
index 94256fe..f030880 100644
--- a/drivers/gpio/gpio-twl4030.c
+++ b/drivers/gpio/gpio-twl4030.c
@@ -51,6 +51,7 @@
 
 
 static struct gpio_chip twl_gpiochip;
+static int twl4030_gpio_base;
 static int twl4030_gpio_irq_base;
 
 /* genirq interfaces are not available to modules */
@@ -428,8 +429,6 @@ no_irqs:
 	twl_gpiochip.dev = &pdev->dev;
 
 	if (pdata) {
-		twl_gpiochip.base = pdata->gpio_base;
-
 		/*
 		 * NOTE:  boards may waste power if they don't set pullups
 		 * and pulldowns correctly ... default for non-ULPI pins is
@@ -461,15 +460,21 @@ no_irqs:
 		dev_err(&pdev->dev, "could not register gpiochip, %d\n", ret);
 		twl_gpiochip.ngpio = 0;
 		gpio_twl4030_remove(pdev);
-	} else if (pdata && pdata->setup) {
+		goto out;
+	}
+
+	twl4030_gpio_base = twl_gpiochip.base;
+
+	if (pdata && pdata->setup) {
 		int status;
 
 		status = pdata->setup(&pdev->dev,
-				pdata->gpio_base, TWL4030_GPIO_MAX);
+				twl4030_gpio_base, TWL4030_GPIO_MAX);
 		if (status)
 			dev_dbg(&pdev->dev, "setup --> %d\n", status);
 	}
 
+out:
 	return ret;
 }
 
@@ -481,7 +486,7 @@ static int gpio_twl4030_remove(struct platform_device *pdev)
 
 	if (pdata && pdata->teardown) {
 		status = pdata->teardown(&pdev->dev,
-				pdata->gpio_base, TWL4030_GPIO_MAX);
+				twl4030_gpio_base, TWL4030_GPIO_MAX);
 		if (status) {
 			dev_dbg(&pdev->dev, "teardown --> %d\n", status);
 			return status;
diff --git a/include/linux/i2c/twl.h b/include/linux/i2c/twl.h
index 7ea898c..a12a381 100644
--- a/include/linux/i2c/twl.h
+++ b/include/linux/i2c/twl.h
@@ -561,9 +561,6 @@ struct twl4030_bci_platform_data {
 
 /* TWL4030_GPIO_MAX (18) GPIOs, with interrupts */
 struct twl4030_gpio_platform_data {
-	int		gpio_base;
-	unsigned	irq_base, irq_end;
-
 	/* package the two LED signals as output-only GPIOs? */
 	bool		use_leds;
 
diff --git a/include/linux/mfd/twl6040.h b/include/linux/mfd/twl6040.h
index eaad49f..ba43d48 100644
--- a/include/linux/mfd/twl6040.h
+++ b/include/linux/mfd/twl6040.h
@@ -194,7 +194,6 @@ struct twl6040_vibra_data {
 
 struct twl6040_platform_data {
 	int audpwron_gpio;	/* audio power-on gpio */
-	unsigned int irq_base;
 
 	struct twl6040_codec_data *codec;
 	struct twl6040_vibra_data *vibra;

  parent reply	other threads:[~2012-09-11  5:30 UTC|newest]

Thread overview: 61+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2012-09-11  5:30 [PATCH 00/17] Resend of mach-omap2 sparse IRQ and hardware.h cleanup Tony Lindgren
2012-09-11  5:30 ` Tony Lindgren
2012-09-11  5:30 ` [PATCH 01/17] ARM: OMAP1: Move define of OMAP_LCD_DMA to dma.h Tony Lindgren
2012-09-11  5:30   ` Tony Lindgren
2012-09-11  5:30 ` [PATCH 02/17] ARM: OMAP1: Define OMAP1_INT_I2C locally Tony Lindgren
2012-09-11  5:30   ` Tony Lindgren
2012-09-11  5:30 ` [PATCH 03/17] ARM: OMAP2+: Make INTCPS_NR_IRQS local for mach-omap2/irq.c Tony Lindgren
2012-09-11  5:30   ` Tony Lindgren
2012-09-11  5:30 ` [PATCH 04/17] ARM: OMAP2+: Remove unused nand_irq for GPMC Tony Lindgren
2012-09-11  5:30   ` Tony Lindgren
2012-09-11  5:30 ` Tony Lindgren [this message]
2012-09-11  5:30   ` [PATCH 05/17] ARM: OMAP2+: Remove hardcoded twl4030 gpio_base, irq_base and irq_end Tony Lindgren
2012-09-11  5:51   ` Felipe Balbi
2012-09-11  5:51     ` Felipe Balbi
2012-09-11  5:30 ` [PATCH 06/17] ARM: OMAP: Move gpio.h to include/linux/platform_data Tony Lindgren
2012-09-11  5:30   ` Tony Lindgren
2012-09-11  5:30 ` [PATCH 07/17] Input: omap-keypad: Remove dependencies to mach includes Tony Lindgren
2012-09-11  5:30   ` Tony Lindgren
2012-09-11  5:57   ` Felipe Balbi
2012-09-11  5:57     ` Felipe Balbi
2012-09-11  6:16     ` Tony Lindgren
2012-09-11  6:16       ` Tony Lindgren
2012-09-11 17:56       ` Tony Lindgren
2012-09-11 17:56         ` Tony Lindgren
2012-09-11 18:27         ` Felipe Balbi
2012-09-11 18:27           ` Felipe Balbi
2012-09-12  4:39           ` Poddar, Sourav
2012-09-12  4:39             ` Poddar, Sourav
2012-09-12  6:39         ` Poddar, Sourav
2012-09-12  6:39           ` Poddar, Sourav
2012-09-11  5:31 ` [PATCH 08/17] W1: OMAP HDQ1W: Remove dependencies to mach/hardware.h Tony Lindgren
2012-09-11  5:31   ` Tony Lindgren
2012-09-11  5:31 ` [PATCH 09/17] serial/8250: Limit the omap workarounds to omap1 Tony Lindgren
2012-09-11  5:31   ` Tony Lindgren
2012-09-11 16:42   ` Alan Cox
2012-09-11 16:42     ` Alan Cox
2012-09-11 16:40     ` Tony Lindgren
2012-09-11 16:40       ` Tony Lindgren
2012-09-11 19:19       ` Alan Cox
2012-09-11 19:19         ` Alan Cox
2012-10-03 22:26         ` Tony Lindgren
2012-10-03 22:26           ` Tony Lindgren
2012-09-11  5:31 ` [PATCH 10/17] staging: tidspbridge: Prepare for irqs.h removal Tony Lindgren
2012-09-11  5:31   ` Tony Lindgren
2012-09-11  5:31 ` [PATCH 11/17] ARM: OMAP2+: " Tony Lindgren
2012-09-11  5:31   ` Tony Lindgren
2012-09-11  5:31 ` [PATCH 12/17] ARM: OMAP2+: Remove hardcoded IRQs and enable SPARSE_IRQ Tony Lindgren
2012-09-11  5:31   ` Tony Lindgren
2012-09-11  5:59   ` Felipe Balbi
2012-09-11  5:59     ` Felipe Balbi
2012-09-11  5:31 ` [PATCH 13/17] ARM: OMAP1: Move plat/irqs.h to mach/irqs.h Tony Lindgren
2012-09-11  5:31   ` Tony Lindgren
2012-09-11  5:31 ` [PATCH 14/17] ARM: OMAP: Remove unused old gpio-switch.h Tony Lindgren
2012-09-11  5:31   ` Tony Lindgren
2012-09-11  5:31 ` [PATCH 15/17] ARM: OMAP: Split plat/hardware.h, use local soc.h for omap2+ Tony Lindgren
2012-09-11  5:31   ` Tony Lindgren
2012-09-11 10:48   ` Wim Van Sebroeck
2012-09-11  5:31 ` [PATCH 16/17] ARM: OMAP2+ Move SoC specific headers to be local to mach-omap2 Tony Lindgren
2012-09-11  5:31   ` Tony Lindgren
2012-09-11  5:31 ` [PATCH 17/17] ARM: OMAP1: Move SoC specific headers from plat to mach for omap1 Tony Lindgren
2012-09-11  5:31   ` Tony Lindgren

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20120911053052.29637.74323.stgit@muffinssi.local \
    --to=tony@atomide.com \
    --cc=grant.likely@secretlab.ca \
    --cc=linus.walleij@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=peter.ujfalusi@ti.com \
    --cc=sameo@linux.intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.