From: Richard Cochran <richardcochran@gmail.com> To: "Benoît Cousson" <b-cousson@ti.com> Cc: linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org, Mugunthan V N <mugunthanvnm@ti.com>, tony@atomide.com Subject: Fwd: [PATCH 5/5] arm/dts: am33xx: Add cpsw and mdio module nodes for AM33XX Date: Wed, 17 Oct 2012 20:18:14 +0200 [thread overview] Message-ID: <20121017181813.GB2412@netboy.at.omicron.at> (raw) Benoit, Would you please take this bugfix for 3.7-rc2? The suggestion to mail you came from Toni Lindgren. The context where it came from is here: http://lists.arm.linux.org.uk/lurker/message/20121015.191630.bdae3c50.en.html Thanks, Richard ----- Forwarded message from Richard Cochran <richardcochran@gmail.com> ----- Date: Mon, 15 Oct 2012 21:16:35 +0200 From: Richard Cochran <richardcochran@gmail.com> To: netdev@vger.kernel.org Cc: linux-arm-kernel@lists.infradead.org, Arnd Bergmann <arnd@arndb.de>, David Miller <davem@davemloft.net>, Russell King <linux@arm.linux.org.uk>, Mugunthan V N <mugunthanvnm@ti.com>, Vaibhav Hiremath <hvaibhav@ti.com> Subject: [PATCH 5/5] arm/dts: am33xx: Add cpsw and mdio module nodes for AM33XX X-Mailer: git-send-email 1.7.2.5 From: Mugunthan V N <mugunthanvnm@ti.com> Add CPSW and MDIO related device tree data for AM33XX. Also enable them into board/evm dts files by providing respective phy-id. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> --- arch/arm/boot/dts/am335x-bone.dts | 8 ++++++ arch/arm/boot/dts/am335x-evm.dts | 8 ++++++ arch/arm/boot/dts/am33xx.dtsi | 50 +++++++++++++++++++++++++++++++++++++ 3 files changed, 66 insertions(+), 0 deletions(-) diff --git a/arch/arm/boot/dts/am335x-bone.dts b/arch/arm/boot/dts/am335x-bone.dts index c634f87..e233cfa 100644 --- a/arch/arm/boot/dts/am335x-bone.dts +++ b/arch/arm/boot/dts/am335x-bone.dts @@ -78,3 +78,11 @@ }; }; }; + +&cpsw_emac0 { + phy_id = "4a101000.mdio:00"; +}; + +&cpsw_emac1 { + phy_id = "4a101000.mdio:01"; +}; diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts index 185d632..415c3b3 100644 --- a/arch/arm/boot/dts/am335x-evm.dts +++ b/arch/arm/boot/dts/am335x-evm.dts @@ -118,3 +118,11 @@ }; }; }; + +&cpsw_emac0 { + phy_id = "4a101000.mdio:00"; +}; + +&cpsw_emac1 { + phy_id = "4a101000.mdio:01"; +}; diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index bb31bff..f6bea04 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -210,5 +210,55 @@ interrupt-parent = <&intc>; interrupts = <91>; }; + + mac: ethernet@4A100000 { + compatible = "ti,cpsw"; + ti,hwmods = "cpgmac0"; + cpdma_channels = <8>; + host_port_no = <0>; + cpdma_reg_ofs = <0x800>; + cpdma_sram_ofs = <0xa00>; + ale_reg_ofs = <0xd00>; + ale_entries = <1024>; + host_port_reg_ofs = <0x108>; + hw_stats_reg_ofs = <0x900>; + bd_ram_ofs = <0x2000>; + bd_ram_size = <0x2000>; + no_bd_ram = <0>; + rx_descs = <64>; + mac_control = <0x20>; + slaves = <2>; + reg = <0x4a100000 0x800 + 0x4a101200 0x100 + 0x4a101000 0x100>; + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&intc>; + /* c0_rx_thresh_pend c0_rx_pend c0_tx_pend c0_misc_pend*/ + interrupts = <40 41 42 43>; + ranges; + cpsw_emac0: slave@0 { + slave_reg_ofs = <0x208>; + sliver_reg_ofs = <0xd80>; + /* Filled in by U-Boot */ + mac-address = [ 00 00 00 00 00 00 ]; + }; + cpsw_emac1: slave@1 { + slave_reg_ofs = <0x308>; + sliver_reg_ofs = <0xdc0>; + /* Filled in by U-Boot */ + mac-address = [ 00 00 00 00 00 00 ]; + }; + + davinci_mdio: mdio@4a101000 { + compatible = "ti,davinci_mdio"; + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "davinci_mdio"; + bus_freq = <1000000>; + reg = <0x4a101000 0x100>; + }; + + }; }; }; -- 1.7.2.5 ----- End forwarded message -----
WARNING: multiple messages have this Message-ID (diff)
From: richardcochran@gmail.com (Richard Cochran) To: linux-arm-kernel@lists.infradead.org Subject: Fwd: [PATCH 5/5] arm/dts: am33xx: Add cpsw and mdio module nodes for AM33XX Date: Wed, 17 Oct 2012 20:18:14 +0200 [thread overview] Message-ID: <20121017181813.GB2412@netboy.at.omicron.at> (raw) Benoit, Would you please take this bugfix for 3.7-rc2? The suggestion to mail you came from Toni Lindgren. The context where it came from is here: http://lists.arm.linux.org.uk/lurker/message/20121015.191630.bdae3c50.en.html Thanks, Richard ----- Forwarded message from Richard Cochran <richardcochran@gmail.com> ----- Date: Mon, 15 Oct 2012 21:16:35 +0200 From: Richard Cochran <richardcochran@gmail.com> To: netdev at vger.kernel.org Cc: linux-arm-kernel at lists.infradead.org, Arnd Bergmann <arnd@arndb.de>, David Miller <davem@davemloft.net>, Russell King <linux@arm.linux.org.uk>, Mugunthan V N <mugunthanvnm@ti.com>, Vaibhav Hiremath <hvaibhav@ti.com> Subject: [PATCH 5/5] arm/dts: am33xx: Add cpsw and mdio module nodes for AM33XX X-Mailer: git-send-email 1.7.2.5 From: Mugunthan V N <mugunthanvnm@ti.com> Add CPSW and MDIO related device tree data for AM33XX. Also enable them into board/evm dts files by providing respective phy-id. Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com> Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> --- arch/arm/boot/dts/am335x-bone.dts | 8 ++++++ arch/arm/boot/dts/am335x-evm.dts | 8 ++++++ arch/arm/boot/dts/am33xx.dtsi | 50 +++++++++++++++++++++++++++++++++++++ 3 files changed, 66 insertions(+), 0 deletions(-) diff --git a/arch/arm/boot/dts/am335x-bone.dts b/arch/arm/boot/dts/am335x-bone.dts index c634f87..e233cfa 100644 --- a/arch/arm/boot/dts/am335x-bone.dts +++ b/arch/arm/boot/dts/am335x-bone.dts @@ -78,3 +78,11 @@ }; }; }; + +&cpsw_emac0 { + phy_id = "4a101000.mdio:00"; +}; + +&cpsw_emac1 { + phy_id = "4a101000.mdio:01"; +}; diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts index 185d632..415c3b3 100644 --- a/arch/arm/boot/dts/am335x-evm.dts +++ b/arch/arm/boot/dts/am335x-evm.dts @@ -118,3 +118,11 @@ }; }; }; + +&cpsw_emac0 { + phy_id = "4a101000.mdio:00"; +}; + +&cpsw_emac1 { + phy_id = "4a101000.mdio:01"; +}; diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index bb31bff..f6bea04 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -210,5 +210,55 @@ interrupt-parent = <&intc>; interrupts = <91>; }; + + mac: ethernet at 4A100000 { + compatible = "ti,cpsw"; + ti,hwmods = "cpgmac0"; + cpdma_channels = <8>; + host_port_no = <0>; + cpdma_reg_ofs = <0x800>; + cpdma_sram_ofs = <0xa00>; + ale_reg_ofs = <0xd00>; + ale_entries = <1024>; + host_port_reg_ofs = <0x108>; + hw_stats_reg_ofs = <0x900>; + bd_ram_ofs = <0x2000>; + bd_ram_size = <0x2000>; + no_bd_ram = <0>; + rx_descs = <64>; + mac_control = <0x20>; + slaves = <2>; + reg = <0x4a100000 0x800 + 0x4a101200 0x100 + 0x4a101000 0x100>; + #address-cells = <1>; + #size-cells = <1>; + interrupt-parent = <&intc>; + /* c0_rx_thresh_pend c0_rx_pend c0_tx_pend c0_misc_pend*/ + interrupts = <40 41 42 43>; + ranges; + cpsw_emac0: slave at 0 { + slave_reg_ofs = <0x208>; + sliver_reg_ofs = <0xd80>; + /* Filled in by U-Boot */ + mac-address = [ 00 00 00 00 00 00 ]; + }; + cpsw_emac1: slave at 1 { + slave_reg_ofs = <0x308>; + sliver_reg_ofs = <0xdc0>; + /* Filled in by U-Boot */ + mac-address = [ 00 00 00 00 00 00 ]; + }; + + davinci_mdio: mdio at 4a101000 { + compatible = "ti,davinci_mdio"; + #address-cells = <1>; + #size-cells = <0>; + ti,hwmods = "davinci_mdio"; + bus_freq = <1000000>; + reg = <0x4a101000 0x100>; + }; + + }; }; }; -- 1.7.2.5 ----- End forwarded message -----
next reply other threads:[~2012-10-17 18:18 UTC|newest] Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top 2012-10-17 18:18 Richard Cochran [this message] 2012-10-17 18:18 ` Fwd: [PATCH 5/5] arm/dts: am33xx: Add cpsw and mdio module nodes for AM33XX Richard Cochran
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20121017181813.GB2412@netboy.at.omicron.at \ --to=richardcochran@gmail.com \ --cc=b-cousson@ti.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-omap@vger.kernel.org \ --cc=mugunthanvnm@ti.com \ --cc=tony@atomide.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.