From: Magnus Damm <magnus.damm@gmail.com>
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 01/04] ARM: shmobile: r7s72100 GPIO and PINCTRL device nodes
Date: Tue, 17 Dec 2013 05:02:42 +0000 [thread overview]
Message-ID: <20131217050242.727.69737.sendpatchset@w520> (raw)
In-Reply-To: <20131217050232.727.9552.sendpatchset@w520>
From: Magnus Damm <damm@opensource.se>
Add support for r7s72100 PFC and GPIO device nodes port0 -> port11
and jtagport0.
Signed-off-by: Magnus Damm <damm@opensource.se>
---
arch/arm/boot/dts/r7s72100.dtsi | 154 +++++++++++++++++++++++++++++++++++++++
1 file changed, 154 insertions(+)
--- 0001/arch/arm/boot/dts/r7s72100.dtsi
+++ work/arch/arm/boot/dts/r7s72100.dtsi 2013-11-27 16:06:36.000000000 +0900
@@ -14,6 +14,22 @@
#address-cells = <1>;
#size-cells = <1>;
+ aliases {
+ gpio0 = &port0;
+ gpio1 = &port1;
+ gpio2 = &port2;
+ gpio3 = &port3;
+ gpio4 = &port4;
+ gpio5 = &port5;
+ gpio6 = &port6;
+ gpio7 = &port7;
+ gpio8 = &port8;
+ gpio9 = &port9;
+ gpio10 = &port10;
+ gpio11 = &port11;
+ gpio12 = &jtagport0;
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
@@ -33,4 +49,142 @@
reg = <0xe8201000 0x1000>,
<0xe8202000 0x1000>;
};
+
+ pfc: pfc@fcfe3300 {
+ compatible = "renesas,pfc-r7s72100";
+ reg = <0xfcfe3300 0x400>, /* PM, PMC, PFC, PFCE */
+ <0xfcfe3a00 0x100>, /* PFCAE */
+ <0xfcfe7000 0x300>, /* PIBC, PBDC, PIPC */
+ <0xfcfe7b40 0x04>, /* JPMC */
+ <0xfcfe7b90 0x04>, /* JPMCSR */
+ <0xfcfe7f00 0x04>; /* JPIBC */
+ };
+
+ port0: gpio@fcfe3100 {
+ compatible = "renesas,gpio-r7s72100", "renesas,gpio-rz";
+ reg = <0xfcfe3100 0x4>, /* PSR */
+ <0xfcfe3200 0x2>, /* PPR */
+ <0xfcfe3800 0x4>; /* PMSR */
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 0 6>;
+ };
+
+ port1: gpio@fcfe3104 {
+ compatible = "renesas,gpio-r7s72100", "renesas,gpio-rz";
+ reg = <0xfcfe3104 0x4>, /* PSR */
+ <0xfcfe3204 0x2>, /* PPR */
+ <0xfcfe3804 0x4>; /* PMSR */
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 16 16>;
+ };
+
+ port2: gpio@fcfe3108 {
+ compatible = "renesas,gpio-r7s72100", "renesas,gpio-rz";
+ reg = <0xfcfe3108 0x4>, /* PSR */
+ <0xfcfe3208 0x2>, /* PPR */
+ <0xfcfe3808 0x4>; /* PMSR */
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 32 16>;
+ };
+
+ port3: gpio@fcfe310c {
+ compatible = "renesas,gpio-r7s72100", "renesas,gpio-rz";
+ reg = <0xfcfe310c 0x4>, /* PSR */
+ <0xfcfe320c 0x2>, /* PPR */
+ <0xfcfe380c 0x4>; /* PMSR */
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 48 16>;
+ };
+
+ port4: gpio@fcfe3110 {
+ compatible = "renesas,gpio-r7s72100", "renesas,gpio-rz";
+ reg = <0xfcfe3110 0x4>, /* PSR */
+ <0xfcfe3210 0x2>, /* PPR */
+ <0xfcfe3810 0x4>; /* PMSR */
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 64 16>;
+ };
+
+ port5: gpio@fcfe3114 {
+ compatible = "renesas,gpio-r7s72100", "renesas,gpio-rz";
+ reg = <0xfcfe3114 0x4>, /* PSR */
+ <0xfcfe3214 0x2>, /* PPR */
+ <0xfcfe3814 0x4>; /* PMSR */
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 80 11>;
+ };
+
+ port6: gpio@fcfe3118 {
+ compatible = "renesas,gpio-r7s72100", "renesas,gpio-rz";
+ reg = <0xfcfe3118 0x4>, /* PSR */
+ <0xfcfe3218 0x2>, /* PPR */
+ <0xfcfe3818 0x4>; /* PMSR */
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 96 16>;
+ };
+
+ port7: gpio@fcfe311c {
+ compatible = "renesas,gpio-r7s72100", "renesas,gpio-rz";
+ reg = <0xfcfe311c 0x4>, /* PSR */
+ <0xfcfe321c 0x2>, /* PPR */
+ <0xfcfe381c 0x4>; /* PMSR */
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 112 16>;
+ };
+
+ port8: gpio@fcfe3120 {
+ compatible = "renesas,gpio-r7s72100", "renesas,gpio-rz";
+ reg = <0xfcfe3120 0x4>, /* PSR */
+ <0xfcfe3220 0x2>, /* PPR */
+ <0xfcfe3820 0x4>; /* PMSR */
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 128 16>;
+ };
+
+ port9: gpio@fcfe3124 {
+ compatible = "renesas,gpio-r7s72100", "renesas,gpio-rz";
+ reg = <0xfcfe3124 0x4>, /* PSR */
+ <0xfcfe3224 0x2>, /* PPR */
+ <0xfcfe3824 0x4>; /* PMSR */
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 144 8>;
+ };
+
+ port10: gpio@fcfe3128 {
+ compatible = "renesas,gpio-r7s72100", "renesas,gpio-rz";
+ reg = <0xfcfe3128 0x4>, /* PSR */
+ <0xfcfe3228 0x2>, /* PPR */
+ <0xfcfe3828 0x4>; /* PMSR */
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 160 16>;
+ };
+
+ port11: gpio@fcfe312c {
+ compatible = "renesas,gpio-r7s72100", "renesas,gpio-rz";
+ reg = <0xfcfe312c 0x4>, /* PSR */
+ <0xfcfe322c 0x2>, /* PPR */
+ <0xfcfe382c 0x4>; /* PMSR */
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 176 16>;
+ };
+
+ jtagport0: gpio@fcfe7b20 {
+ compatible = "renesas,gpio-r7s72100", "renesas,gpio-rz";
+ reg = <0xfcfe7b20 0x2>; /* JPPR */
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 192 2>;
+ };
};
WARNING: multiple messages have this Message-ID (diff)
From: magnus.damm@gmail.com (Magnus Damm)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 01/04] ARM: shmobile: r7s72100 GPIO and PINCTRL device nodes
Date: Tue, 17 Dec 2013 14:02:42 +0900 [thread overview]
Message-ID: <20131217050242.727.69737.sendpatchset@w520> (raw)
In-Reply-To: <20131217050232.727.9552.sendpatchset@w520>
From: Magnus Damm <damm@opensource.se>
Add support for r7s72100 PFC and GPIO device nodes port0 -> port11
and jtagport0.
Signed-off-by: Magnus Damm <damm@opensource.se>
---
arch/arm/boot/dts/r7s72100.dtsi | 154 +++++++++++++++++++++++++++++++++++++++
1 file changed, 154 insertions(+)
--- 0001/arch/arm/boot/dts/r7s72100.dtsi
+++ work/arch/arm/boot/dts/r7s72100.dtsi 2013-11-27 16:06:36.000000000 +0900
@@ -14,6 +14,22 @@
#address-cells = <1>;
#size-cells = <1>;
+ aliases {
+ gpio0 = &port0;
+ gpio1 = &port1;
+ gpio2 = &port2;
+ gpio3 = &port3;
+ gpio4 = &port4;
+ gpio5 = &port5;
+ gpio6 = &port6;
+ gpio7 = &port7;
+ gpio8 = &port8;
+ gpio9 = &port9;
+ gpio10 = &port10;
+ gpio11 = &port11;
+ gpio12 = &jtagport0;
+ };
+
cpus {
#address-cells = <1>;
#size-cells = <0>;
@@ -33,4 +49,142 @@
reg = <0xe8201000 0x1000>,
<0xe8202000 0x1000>;
};
+
+ pfc: pfc at fcfe3300 {
+ compatible = "renesas,pfc-r7s72100";
+ reg = <0xfcfe3300 0x400>, /* PM, PMC, PFC, PFCE */
+ <0xfcfe3a00 0x100>, /* PFCAE */
+ <0xfcfe7000 0x300>, /* PIBC, PBDC, PIPC */
+ <0xfcfe7b40 0x04>, /* JPMC */
+ <0xfcfe7b90 0x04>, /* JPMCSR */
+ <0xfcfe7f00 0x04>; /* JPIBC */
+ };
+
+ port0: gpio at fcfe3100 {
+ compatible = "renesas,gpio-r7s72100", "renesas,gpio-rz";
+ reg = <0xfcfe3100 0x4>, /* PSR */
+ <0xfcfe3200 0x2>, /* PPR */
+ <0xfcfe3800 0x4>; /* PMSR */
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 0 6>;
+ };
+
+ port1: gpio at fcfe3104 {
+ compatible = "renesas,gpio-r7s72100", "renesas,gpio-rz";
+ reg = <0xfcfe3104 0x4>, /* PSR */
+ <0xfcfe3204 0x2>, /* PPR */
+ <0xfcfe3804 0x4>; /* PMSR */
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 16 16>;
+ };
+
+ port2: gpio at fcfe3108 {
+ compatible = "renesas,gpio-r7s72100", "renesas,gpio-rz";
+ reg = <0xfcfe3108 0x4>, /* PSR */
+ <0xfcfe3208 0x2>, /* PPR */
+ <0xfcfe3808 0x4>; /* PMSR */
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 32 16>;
+ };
+
+ port3: gpio at fcfe310c {
+ compatible = "renesas,gpio-r7s72100", "renesas,gpio-rz";
+ reg = <0xfcfe310c 0x4>, /* PSR */
+ <0xfcfe320c 0x2>, /* PPR */
+ <0xfcfe380c 0x4>; /* PMSR */
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 48 16>;
+ };
+
+ port4: gpio at fcfe3110 {
+ compatible = "renesas,gpio-r7s72100", "renesas,gpio-rz";
+ reg = <0xfcfe3110 0x4>, /* PSR */
+ <0xfcfe3210 0x2>, /* PPR */
+ <0xfcfe3810 0x4>; /* PMSR */
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 64 16>;
+ };
+
+ port5: gpio at fcfe3114 {
+ compatible = "renesas,gpio-r7s72100", "renesas,gpio-rz";
+ reg = <0xfcfe3114 0x4>, /* PSR */
+ <0xfcfe3214 0x2>, /* PPR */
+ <0xfcfe3814 0x4>; /* PMSR */
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 80 11>;
+ };
+
+ port6: gpio at fcfe3118 {
+ compatible = "renesas,gpio-r7s72100", "renesas,gpio-rz";
+ reg = <0xfcfe3118 0x4>, /* PSR */
+ <0xfcfe3218 0x2>, /* PPR */
+ <0xfcfe3818 0x4>; /* PMSR */
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 96 16>;
+ };
+
+ port7: gpio at fcfe311c {
+ compatible = "renesas,gpio-r7s72100", "renesas,gpio-rz";
+ reg = <0xfcfe311c 0x4>, /* PSR */
+ <0xfcfe321c 0x2>, /* PPR */
+ <0xfcfe381c 0x4>; /* PMSR */
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 112 16>;
+ };
+
+ port8: gpio at fcfe3120 {
+ compatible = "renesas,gpio-r7s72100", "renesas,gpio-rz";
+ reg = <0xfcfe3120 0x4>, /* PSR */
+ <0xfcfe3220 0x2>, /* PPR */
+ <0xfcfe3820 0x4>; /* PMSR */
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 128 16>;
+ };
+
+ port9: gpio at fcfe3124 {
+ compatible = "renesas,gpio-r7s72100", "renesas,gpio-rz";
+ reg = <0xfcfe3124 0x4>, /* PSR */
+ <0xfcfe3224 0x2>, /* PPR */
+ <0xfcfe3824 0x4>; /* PMSR */
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 144 8>;
+ };
+
+ port10: gpio at fcfe3128 {
+ compatible = "renesas,gpio-r7s72100", "renesas,gpio-rz";
+ reg = <0xfcfe3128 0x4>, /* PSR */
+ <0xfcfe3228 0x2>, /* PPR */
+ <0xfcfe3828 0x4>; /* PMSR */
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 160 16>;
+ };
+
+ port11: gpio at fcfe312c {
+ compatible = "renesas,gpio-r7s72100", "renesas,gpio-rz";
+ reg = <0xfcfe312c 0x4>, /* PSR */
+ <0xfcfe322c 0x2>, /* PPR */
+ <0xfcfe382c 0x4>; /* PMSR */
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 176 16>;
+ };
+
+ jtagport0: gpio at fcfe7b20 {
+ compatible = "renesas,gpio-r7s72100", "renesas,gpio-rz";
+ reg = <0xfcfe7b20 0x2>; /* JPPR */
+ #gpio-cells = <2>;
+ gpio-controller;
+ gpio-ranges = <&pfc 0 192 2>;
+ };
};
next prev parent reply other threads:[~2013-12-17 5:02 UTC|newest]
Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-12-17 5:02 [PATCH 00/04 v2] ARM: shmobile: r7s72100 and Genmai GPIO / PINCTRL V2 Magnus Damm
2013-12-17 5:02 ` Magnus Damm
2013-12-17 5:02 ` Magnus Damm [this message]
2013-12-17 5:02 ` [PATCH 01/04] ARM: shmobile: r7s72100 GPIO and PINCTRL device nodes Magnus Damm
2013-12-17 16:29 ` Laurent Pinchart
2013-12-17 16:29 ` Laurent Pinchart
2013-12-17 22:41 ` Magnus Damm
2013-12-17 22:41 ` Magnus Damm
2013-12-18 0:40 ` Laurent Pinchart
2013-12-18 0:40 ` Laurent Pinchart
2013-12-18 2:07 ` Magnus Damm
2013-12-18 2:07 ` Magnus Damm
2013-12-19 0:15 ` Laurent Pinchart
2013-12-19 0:15 ` Laurent Pinchart
2013-12-19 7:39 ` Magnus Damm
2013-12-19 7:39 ` Magnus Damm
2013-12-17 17:01 ` Wolfram Sang
2013-12-17 17:01 ` Wolfram Sang
2013-12-17 5:03 ` [PATCH 02/04] ARM: shmobile: Genmai SCIF2 PINCTRL configuration Magnus Damm
2013-12-17 5:03 ` Magnus Damm
2013-12-17 5:03 ` [PATCH 03/04] ARM: shmobile: Genmai LED1 and LED2 support Magnus Damm
2013-12-17 5:03 ` Magnus Damm
2013-12-17 5:03 ` [PATCH 04/04 v2] ARM: shmobile: Genmai I2C-over-GPIO support Magnus Damm
2013-12-17 5:03 ` Magnus Damm
2013-12-17 16:34 ` Wolfram Sang
2013-12-17 16:34 ` Wolfram Sang
2014-01-08 0:41 ` Simon Horman
2014-01-08 0:41 ` Simon Horman
2014-01-08 11:23 ` Wolfram Sang
2014-01-08 11:23 ` Wolfram Sang
2014-01-09 4:35 ` Simon Horman
2014-01-09 4:35 ` Simon Horman
2013-12-18 14:26 ` [PATCH 00/04 v2] ARM: shmobile: r7s72100 and Genmai GPIO / PINCTRL V2 Geert Uytterhoeven
2013-12-18 14:26 ` Geert Uytterhoeven
2014-01-08 0:45 ` Simon Horman
2014-01-08 0:45 ` Simon Horman
2014-01-08 0:48 ` Simon Horman
2014-01-08 0:48 ` Simon Horman
-- strict thread matches above, loose matches on Subject: below --
2013-11-27 8:27 [PATCH 00/04] ARM: shmobile: r7s72100 and Genmai GPIO / PINCTRL support Magnus Damm
2013-11-27 8:27 ` [PATCH 01/04] ARM: shmobile: r7s72100 GPIO and PINCTRL device nodes Magnus Damm
2013-11-27 8:27 ` Magnus Damm
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20131217050242.727.69737.sendpatchset@w520 \
--to=magnus.damm@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.