[PATCH] Input: xpad: use proper endpoint type

[Greg Kroah-Hartman <gregkh@linuxfoundation.org>]

The xpad wireless endpoint is not a bulk endpoint on my devices, but
rather an interrupt one, so the USB core complains when it is submitted.
I'm guessing that the author really did mean that this should be an
interrupt urb, but as there are a zillion different xpad devices out
there, let's cover out bases and handle both bulk and interrupt
endpoints just as easily.

Signed-off-by: "Pierre-Loup A. Griffais" <pgriffais@valvesoftware.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: stable <stable@vger.kernel.org>
---

This has been in my local tree since January, don't know why it never
got pushed out, sorry for the delay.  Valve has been using a version of
this patch for a year now.

 drivers/input/joystick/xpad.c |   16 +++++++++++++---
 1 file changed, 13 insertions(+), 3 deletions(-)

--- a/drivers/input/joystick/xpad.c
+++ b/drivers/input/joystick/xpad.c
@@ -1179,9 +1179,19 @@ static int xpad_probe(struct usb_interfa
 		}
 
 		ep_irq_in = &intf->cur_altsetting->endpoint[1].desc;
-		usb_fill_bulk_urb(xpad->bulk_out, udev,
-				usb_sndbulkpipe(udev, ep_irq_in->bEndpointAddress),
-				xpad->bdata, XPAD_PKT_LEN, xpad_bulk_out, xpad);
+		if (usb_endpoint_is_bulk_out(ep_irq_in)) {
+			usb_fill_bulk_urb(xpad->bulk_out, udev,
+					  usb_sndbulkpipe(udev,
+							  ep_irq_in->bEndpointAddress),
+					  xpad->bdata, XPAD_PKT_LEN,
+					  xpad_bulk_out, xpad);
+		} else {
+			usb_fill_int_urb(xpad->bulk_out, udev,
+					 usb_sndintpipe(udev,
+							ep_irq_in->bEndpointAddress),
+					 xpad->bdata, XPAD_PKT_LEN,
+					 xpad_bulk_out, xpad, 0);
+		}
 
 		/*
 		 * Submit the int URB immediately rather than waiting for open