From: Kalle Valo <kvalo@qca.qualcomm.com> To: <ath10k@lists.infradead.org> Cc: <linux-wireless@vger.kernel.org> Subject: [PATCH v2 2/8] ath10k: use wmi op version to check which iface combination to use Date: Wed, 17 Dec 2014 12:20:54 +0200 [thread overview] Message-ID: <20141217102054.15964.32162.stgit@potku.adurom.net> (raw) In-Reply-To: <20141217101755.15964.2625.stgit@potku.adurom.net> ATH10K_FW_FEATURE_WMI_10X should not be used for anymore as that's now deprecated, instead use wmi op version. Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com> --- drivers/net/wireless/ath/ath10k/mac.c | 21 +++++++++++++++------ 1 file changed, 15 insertions(+), 6 deletions(-) diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c index 5475f0fbbe41..4576d758d50b 100644 --- a/drivers/net/wireless/ath/ath10k/mac.c +++ b/drivers/net/wireless/ath/ath10k/mac.c @@ -5064,16 +5064,25 @@ int ath10k_mac_register(struct ath10k *ar) */ ar->hw->queues = 4; - if (test_bit(ATH10K_FW_FEATURE_WMI_10X, ar->fw_features)) { - ar->hw->wiphy->iface_combinations = ath10k_10x_if_comb; - ar->hw->wiphy->n_iface_combinations = - ARRAY_SIZE(ath10k_10x_if_comb); - } else { + switch (ar->wmi.op_version) { + case ATH10K_FW_WMI_OP_VERSION_MAIN: + case ATH10K_FW_WMI_OP_VERSION_TLV: ar->hw->wiphy->iface_combinations = ath10k_if_comb; ar->hw->wiphy->n_iface_combinations = ARRAY_SIZE(ath10k_if_comb); - ar->hw->wiphy->interface_modes |= BIT(NL80211_IFTYPE_ADHOC); + break; + case ATH10K_FW_WMI_OP_VERSION_10_1: + case ATH10K_FW_WMI_OP_VERSION_10_2: + ar->hw->wiphy->iface_combinations = ath10k_10x_if_comb; + ar->hw->wiphy->n_iface_combinations = + ARRAY_SIZE(ath10k_10x_if_comb); + break; + case ATH10K_FW_WMI_OP_VERSION_UNSET: + case ATH10K_FW_WMI_OP_VERSION_MAX: + WARN_ON(1); + ret = -EINVAL; + goto err_free; } ar->hw->netdev_features = NETIF_F_HW_CSUM;
WARNING: multiple messages have this Message-ID (diff)
From: Kalle Valo <kvalo@qca.qualcomm.com> To: ath10k@lists.infradead.org Cc: linux-wireless@vger.kernel.org Subject: [PATCH v2 2/8] ath10k: use wmi op version to check which iface combination to use Date: Wed, 17 Dec 2014 12:20:54 +0200 [thread overview] Message-ID: <20141217102054.15964.32162.stgit@potku.adurom.net> (raw) In-Reply-To: <20141217101755.15964.2625.stgit@potku.adurom.net> ATH10K_FW_FEATURE_WMI_10X should not be used for anymore as that's now deprecated, instead use wmi op version. Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com> --- drivers/net/wireless/ath/ath10k/mac.c | 21 +++++++++++++++------ 1 file changed, 15 insertions(+), 6 deletions(-) diff --git a/drivers/net/wireless/ath/ath10k/mac.c b/drivers/net/wireless/ath/ath10k/mac.c index 5475f0fbbe41..4576d758d50b 100644 --- a/drivers/net/wireless/ath/ath10k/mac.c +++ b/drivers/net/wireless/ath/ath10k/mac.c @@ -5064,16 +5064,25 @@ int ath10k_mac_register(struct ath10k *ar) */ ar->hw->queues = 4; - if (test_bit(ATH10K_FW_FEATURE_WMI_10X, ar->fw_features)) { - ar->hw->wiphy->iface_combinations = ath10k_10x_if_comb; - ar->hw->wiphy->n_iface_combinations = - ARRAY_SIZE(ath10k_10x_if_comb); - } else { + switch (ar->wmi.op_version) { + case ATH10K_FW_WMI_OP_VERSION_MAIN: + case ATH10K_FW_WMI_OP_VERSION_TLV: ar->hw->wiphy->iface_combinations = ath10k_if_comb; ar->hw->wiphy->n_iface_combinations = ARRAY_SIZE(ath10k_if_comb); - ar->hw->wiphy->interface_modes |= BIT(NL80211_IFTYPE_ADHOC); + break; + case ATH10K_FW_WMI_OP_VERSION_10_1: + case ATH10K_FW_WMI_OP_VERSION_10_2: + ar->hw->wiphy->iface_combinations = ath10k_10x_if_comb; + ar->hw->wiphy->n_iface_combinations = + ARRAY_SIZE(ath10k_10x_if_comb); + break; + case ATH10K_FW_WMI_OP_VERSION_UNSET: + case ATH10K_FW_WMI_OP_VERSION_MAX: + WARN_ON(1); + ret = -EINVAL; + goto err_free; } ar->hw->netdev_features = NETIF_F_HW_CSUM; _______________________________________________ ath10k mailing list ath10k@lists.infradead.org http://lists.infradead.org/mailman/listinfo/ath10k
next prev parent reply other threads:[~2014-12-17 10:20 UTC|newest] Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top 2014-12-17 10:20 [PATCH v2 0/8] ath10k: Add thermal mitigation support Kalle Valo 2014-12-17 10:20 ` Kalle Valo 2014-12-17 10:20 ` [PATCH v2 1/8] ath10k: set max_num_vdevs based on wmi op version Kalle Valo 2014-12-17 10:20 ` Kalle Valo 2014-12-17 10:20 ` Kalle Valo [this message] 2014-12-17 10:20 ` [PATCH v2 2/8] ath10k: use wmi op version to check which iface combination to use Kalle Valo 2014-12-17 10:21 ` [PATCH v2 3/8] ath10k: print ath10k wmi op version Kalle Valo 2014-12-17 10:21 ` Kalle Valo 2014-12-17 10:21 ` [PATCH v2 4/8] ath10k: add 10.2.4 firmware support Kalle Valo 2014-12-17 10:21 ` Kalle Valo 2014-12-17 10:21 ` [PATCH v2 5/8] ath10k: add wmi support for pdev_set_quiet_mode Kalle Valo 2014-12-17 10:21 ` Kalle Valo 2014-12-17 10:22 ` [PATCH v2 6/8] ath10k: add thermal cooling device support Kalle Valo 2014-12-17 10:22 ` Kalle Valo 2014-12-17 10:22 ` [PATCH v2 7/8] ath10k: add wmi interface for pdev_get_temperature Kalle Valo 2014-12-17 10:22 ` Kalle Valo 2014-12-17 10:22 ` [PATCH v2 8/8] ath10k: add thermal sensor device support Kalle Valo 2014-12-17 10:22 ` Kalle Valo 2014-12-17 18:56 ` Sebastian Gottschall [not found] ` <5491D20F.2020202@dd-wrt.com> 2014-12-23 17:43 ` Kalle Valo 2014-12-23 17:43 ` Kalle Valo 2014-12-23 19:52 ` Sebastian Gottschall 2014-12-23 19:52 ` Sebastian Gottschall 2014-12-23 15:21 ` [PATCH v2 0/8] ath10k: Add thermal mitigation support Kalle Valo 2014-12-23 15:21 ` Kalle Valo
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20141217102054.15964.32162.stgit@potku.adurom.net \ --to=kvalo@qca.qualcomm.com \ --cc=ath10k@lists.infradead.org \ --cc=linux-wireless@vger.kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.