From: "Darrick J. Wong" <darrick.wong@oracle.com> To: david@fromorbit.com, darrick.wong@oracle.com Cc: linux-btrfs@vger.kernel.org, fstests@vger.kernel.org, xfs@oss.sgi.com Subject: [PATCH 14/32] reflink: test CoW behavior with IO errors Date: Thu, 11 Feb 2016 15:40:50 -0800 [thread overview] Message-ID: <20160211234050.2202.4569.stgit@birch.djwong.org> (raw) In-Reply-To: <20160211233916.2202.40961.stgit@birch.djwong.org> Test various scenarios (with dm-flakey) where we simulate write failures during CoW, to see if the FS can get through it without blowing up or corrupting data. Plumb in a FS-generic method to sort out repairing filesystems after they get hit by IO errors. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> --- tests/generic/265 | 99 +++++++++++++++++++++++++++++++++++++++++++++++ tests/generic/265.out | 11 +++++ tests/generic/266 | 97 ++++++++++++++++++++++++++++++++++++++++++++++ tests/generic/266.out | 11 +++++ tests/generic/267 | 100 +++++++++++++++++++++++++++++++++++++++++++++++ tests/generic/267.out | 10 +++++ tests/generic/268 | 103 +++++++++++++++++++++++++++++++++++++++++++++++++ tests/generic/268.out | 12 ++++++ tests/generic/271 | 100 +++++++++++++++++++++++++++++++++++++++++++++++ tests/generic/271.out | 11 +++++ tests/generic/272 | 98 ++++++++++++++++++++++++++++++++++++++++++++++ tests/generic/272.out | 11 +++++ tests/generic/276 | 101 ++++++++++++++++++++++++++++++++++++++++++++++++ tests/generic/276.out | 11 +++++ tests/generic/278 | 104 +++++++++++++++++++++++++++++++++++++++++++++++++ tests/generic/278.out | 12 ++++++ tests/generic/279 | 100 +++++++++++++++++++++++++++++++++++++++++++++++ tests/generic/279.out | 11 +++++ tests/generic/281 | 98 ++++++++++++++++++++++++++++++++++++++++++++++ tests/generic/281.out | 11 +++++ tests/generic/282 | 101 ++++++++++++++++++++++++++++++++++++++++++++++++ tests/generic/282.out | 10 +++++ tests/generic/283 | 104 +++++++++++++++++++++++++++++++++++++++++++++++++ tests/generic/283.out | 12 ++++++ tests/generic/group | 12 ++++++ 25 files changed, 1350 insertions(+) create mode 100755 tests/generic/265 create mode 100644 tests/generic/265.out create mode 100755 tests/generic/266 create mode 100644 tests/generic/266.out create mode 100755 tests/generic/267 create mode 100644 tests/generic/267.out create mode 100755 tests/generic/268 create mode 100644 tests/generic/268.out create mode 100755 tests/generic/271 create mode 100644 tests/generic/271.out create mode 100755 tests/generic/272 create mode 100644 tests/generic/272.out create mode 100755 tests/generic/276 create mode 100644 tests/generic/276.out create mode 100755 tests/generic/278 create mode 100644 tests/generic/278.out create mode 100755 tests/generic/279 create mode 100644 tests/generic/279.out create mode 100755 tests/generic/281 create mode 100644 tests/generic/281.out create mode 100755 tests/generic/282 create mode 100644 tests/generic/282.out create mode 100755 tests/generic/283 create mode 100644 tests/generic/283.out diff --git a/tests/generic/265 b/tests/generic/265 new file mode 100755 index 0000000..607867d --- /dev/null +++ b/tests/generic/265 @@ -0,0 +1,99 @@ +#! /bin/bash +# FS QA Test No. 265 +# +# Test CoW behavior when the write temporarily fails. +# +#----------------------------------------------------------------------- +# Copyright (c) 2016, Oracle and/or its affiliates. All Rights Reserved. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it would be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write the Free Software Foundation, +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +#----------------------------------------------------------------------- + +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 15 + +_cleanup() +{ + cd / + rm -rf $tmp.* + _dmerror_cleanup +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter +. ./common/reflink +. ./common/dmerror + +# real QA test starts here +_supported_os Linux +_require_scratch_reflink +_require_cp_reflink +_need_to_be_root +_require_dm_target error + +rm -f $seqres.full + + +echo "Format and mount" +_scratch_mkfs > $seqres.full 2>&1 +_dmerror_init +_dmerror_mount >> $seqres.full 2>&1 + +testdir=$SCRATCH_MNT/test-$seq +mkdir $testdir + +blksz=65536 +nr=640 +bufnr=128 +filesize=$((blksz * nr)) +bufsize=$((blksz * bufnr)) + +_require_fs_space $SCRATCH_MNT $((filesize / 1024 * 3 * 5 / 4)) + +echo "Create the original files" +$XFS_IO_PROG -f -c "pwrite -S 0x61 -b $bufsize 0 $filesize" $testdir/file1 >> $seqres.full +_cp_reflink $testdir/file1 $testdir/file2 >> $seqres.full +_dmerror_unmount +_dmerror_mount + +echo "Compare files" +md5sum $testdir/file1 | _filter_scratch +md5sum $testdir/file2 | _filter_scratch + +echo "CoW and unmount" +sync +_dmerror_load_error_table +$XFS_IO_PROG -f -c "pwrite -S 0x63 -b $bufsize 0 $filesize" -c "fdatasync" $testdir/file2 >> $seqres.full +_dmerror_load_working_table +_dmerror_unmount +_dmerror_mount + +echo "Compare files" +md5sum $testdir/file1 | _filter_scratch + +echo "Check for damage" +_dmerror_unmount +_dmerror_cleanup +_repair_scratch_fs >> $seqres.full + +# success, all done +status=0 +exit diff --git a/tests/generic/265.out b/tests/generic/265.out new file mode 100644 index 0000000..1b67114 --- /dev/null +++ b/tests/generic/265.out @@ -0,0 +1,11 @@ +QA output created by 265 +Format and mount +Create the original files +Compare files +1886e67cf8783e89ce6ddc5bb09a3944 SCRATCH_MNT/test-265/file1 +1886e67cf8783e89ce6ddc5bb09a3944 SCRATCH_MNT/test-265/file2 +CoW and unmount +fdatasync: Input/output error +Compare files +1886e67cf8783e89ce6ddc5bb09a3944 SCRATCH_MNT/test-265/file1 +Check for damage diff --git a/tests/generic/266 b/tests/generic/266 new file mode 100755 index 0000000..102df76 --- /dev/null +++ b/tests/generic/266 @@ -0,0 +1,97 @@ +#! /bin/bash +# FS QA Test No. 266 +# +# Test CoW behavior when the write permanently fails. +# +#----------------------------------------------------------------------- +# Copyright (c) 2016, Oracle and/or its affiliates. All Rights Reserved. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it would be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write the Free Software Foundation, +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +#----------------------------------------------------------------------- + +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 15 + +_cleanup() +{ + cd / + rm -rf $tmp.* + _dmerror_cleanup +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter +. ./common/reflink +. ./common/dmerror + +# real QA test starts here +_supported_os Linux +_require_scratch_reflink +_require_cp_reflink +_need_to_be_root +_require_dm_target error + +rm -f $seqres.full + + +echo "Format and mount" +_scratch_mkfs > $seqres.full 2>&1 +_dmerror_init +_dmerror_mount >> $seqres.full 2>&1 + +testdir=$SCRATCH_MNT/test-$seq +mkdir $testdir + +blksz=65536 +nr=640 +bufnr=128 +filesize=$((blksz * nr)) +bufsize=$((blksz * bufnr)) + +_require_fs_space $SCRATCH_MNT $((filesize / 1024 * 3 * 5 / 4)) + +echo "Create the original files" +$XFS_IO_PROG -f -c "pwrite -S 0x61 -b $bufsize 0 $filesize" $testdir/file1 >> $seqres.full +_cp_reflink $testdir/file1 $testdir/file2 >> $seqres.full +_dmerror_unmount +_dmerror_mount + +echo "Compare files" +md5sum $testdir/file1 | _filter_scratch +md5sum $testdir/file2 | _filter_scratch + +echo "CoW and unmount" +sync +_dmerror_load_error_table +$XFS_IO_PROG -f -c "pwrite -S 0x63 -b $bufsize 0 $filesize" -c "fdatasync" $testdir/file2 >> $seqres.full + +echo "Clean up the mess" +_dmerror_unmount +_dmerror_cleanup +_repair_scratch_fs >> $seqres.full +_scratch_mount >> $seqres.full 2>&1 + +echo "Compare files" +md5sum $testdir/file1 | _filter_scratch + +# success, all done +status=0 +exit diff --git a/tests/generic/266.out b/tests/generic/266.out new file mode 100644 index 0000000..dd34ad3 --- /dev/null +++ b/tests/generic/266.out @@ -0,0 +1,11 @@ +QA output created by 266 +Format and mount +Create the original files +Compare files +1886e67cf8783e89ce6ddc5bb09a3944 SCRATCH_MNT/test-266/file1 +1886e67cf8783e89ce6ddc5bb09a3944 SCRATCH_MNT/test-266/file2 +CoW and unmount +fdatasync: Input/output error +Clean up the mess +Compare files +1886e67cf8783e89ce6ddc5bb09a3944 SCRATCH_MNT/test-266/file1 diff --git a/tests/generic/267 b/tests/generic/267 new file mode 100755 index 0000000..24b7b7c --- /dev/null +++ b/tests/generic/267 @@ -0,0 +1,100 @@ +#! /bin/bash +# FS QA Test No. 267 +# +# Test CoW behavior when the write temporarily fails and we unmount. +# +#----------------------------------------------------------------------- +# Copyright (c) 2016, Oracle and/or its affiliates. All Rights Reserved. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it would be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write the Free Software Foundation, +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +#----------------------------------------------------------------------- + +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 15 + +_cleanup() +{ + cd / + rm -rf $tmp.* + _dmerror_cleanup +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter +. ./common/reflink +. ./common/dmerror + +# real QA test starts here +_supported_os Linux +_require_scratch_reflink +_require_cp_reflink +_need_to_be_root +_require_dm_target error + +rm -f $seqres.full + + +echo "Format and mount" +_scratch_mkfs > $seqres.full 2>&1 +_dmerror_init +_dmerror_mount >> $seqres.full 2>&1 + +testdir=$SCRATCH_MNT/test-$seq +mkdir $testdir + +blksz=65536 +nr=640 +bufnr=128 +filesize=$((blksz * nr)) +bufsize=$((blksz * bufnr)) + +_require_fs_space $SCRATCH_MNT $((filesize / 1024 * 3 * 5 / 4)) + +echo "Create the original files" +$XFS_IO_PROG -f -c "pwrite -S 0x61 -b $bufsize 0 $filesize" $testdir/file1 >> $seqres.full +_cp_reflink $testdir/file1 $testdir/file2 >> $seqres.full +_dmerror_unmount +_dmerror_mount + +echo "Compare files" +md5sum $testdir/file1 | _filter_scratch +md5sum $testdir/file2 | _filter_scratch + +echo "CoW and unmount" +sync +_dmerror_load_error_table +$XFS_IO_PROG -f -c "pwrite -S 0x63 -b $bufsize 0 $filesize" $testdir/file2 >> $seqres.full +_dmerror_load_working_table +rm -rf $testdir/file2 >> $seqres.full 2>&1 +_dmerror_unmount +_dmerror_mount + +echo "Compare files" +md5sum $testdir/file1 | _filter_scratch + +echo "Check for damage" +_dmerror_unmount +_dmerror_cleanup +_repair_scratch_fs >> $seqres.full + +# success, all done +status=0 +exit diff --git a/tests/generic/267.out b/tests/generic/267.out new file mode 100644 index 0000000..3c58e67 --- /dev/null +++ b/tests/generic/267.out @@ -0,0 +1,10 @@ +QA output created by 267 +Format and mount +Create the original files +Compare files +1886e67cf8783e89ce6ddc5bb09a3944 SCRATCH_MNT/test-267/file1 +1886e67cf8783e89ce6ddc5bb09a3944 SCRATCH_MNT/test-267/file2 +CoW and unmount +Compare files +1886e67cf8783e89ce6ddc5bb09a3944 SCRATCH_MNT/test-267/file1 +Check for damage diff --git a/tests/generic/268 b/tests/generic/268 new file mode 100755 index 0000000..c17ea57 --- /dev/null +++ b/tests/generic/268 @@ -0,0 +1,103 @@ +#! /bin/bash +# FS QA Test No. 268 +# +# Test CoW behavior when the write temporarily fails but the userspace +# program writes again. +# +#----------------------------------------------------------------------- +# Copyright (c) 2016, Oracle and/or its affiliates. All Rights Reserved. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it would be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write the Free Software Foundation, +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +#----------------------------------------------------------------------- + +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 15 + +_cleanup() +{ + cd / + rm -rf $tmp.* + _dmerror_cleanup +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter +. ./common/reflink +. ./common/dmerror + +# real QA test starts here +_supported_os Linux +_require_scratch_reflink +_require_cp_reflink +_need_to_be_root +_require_dm_target error + +rm -f $seqres.full + + +echo "Format and mount" +_scratch_mkfs > $seqres.full 2>&1 +_dmerror_init +_dmerror_mount >> $seqres.full 2>&1 + +testdir=$SCRATCH_MNT/test-$seq +mkdir $testdir + +blksz=65536 +nr=640 +bufnr=128 +filesize=$((blksz * nr)) +bufsize=$((blksz * bufnr)) + +_require_fs_space $SCRATCH_MNT $((filesize / 1024 * 3 * 5 / 4)) + +echo "Create the original files" +$XFS_IO_PROG -f -c "pwrite -S 0x61 -b $bufsize 0 $filesize" $testdir/file1 >> $seqres.full +_cp_reflink $testdir/file1 $testdir/file2 >> $seqres.full +_dmerror_unmount +_dmerror_mount + +echo "Compare files" +md5sum $testdir/file1 | _filter_scratch +md5sum $testdir/file2 | _filter_scratch + +echo "CoW and unmount" +sync +_dmerror_load_error_table +$XFS_IO_PROG -f -c "pwrite -S 0x63 -b $bufsize 0 $filesize" -c "fdatasync" $testdir/file2 >> $seqres.full +_dmerror_load_working_table + +echo "Rewrite" +$XFS_IO_PROG -f -c "pwrite -S 0x64 -b $bufsize 0 $filesize" -c "fdatasync" $testdir/file2 >> $seqres.full 2>&1 +_dmerror_unmount +_dmerror_mount + +echo "Compare files" +md5sum $testdir/file1 | _filter_scratch + +echo "Check for damage" +_dmerror_unmount +_dmerror_cleanup +_repair_scratch_fs >> $seqres.full + +# success, all done +status=0 +exit diff --git a/tests/generic/268.out b/tests/generic/268.out new file mode 100644 index 0000000..234e8be --- /dev/null +++ b/tests/generic/268.out @@ -0,0 +1,12 @@ +QA output created by 268 +Format and mount +Create the original files +Compare files +1886e67cf8783e89ce6ddc5bb09a3944 SCRATCH_MNT/test-268/file1 +1886e67cf8783e89ce6ddc5bb09a3944 SCRATCH_MNT/test-268/file2 +CoW and unmount +fdatasync: Input/output error +Rewrite +Compare files +1886e67cf8783e89ce6ddc5bb09a3944 SCRATCH_MNT/test-268/file1 +Check for damage diff --git a/tests/generic/271 b/tests/generic/271 new file mode 100755 index 0000000..955478e --- /dev/null +++ b/tests/generic/271 @@ -0,0 +1,100 @@ +#! /bin/bash +# FS QA Test No. 271 +# +# Test DIO CoW behavior when the write temporarily fails. +# +#----------------------------------------------------------------------- +# Copyright (c) 2016, Oracle and/or its affiliates. All Rights Reserved. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it would be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write the Free Software Foundation, +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +#----------------------------------------------------------------------- + +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 15 + +_cleanup() +{ + cd / + rm -rf $tmp.* + _dmerror_cleanup +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter +. ./common/reflink +. ./common/dmerror + +# real QA test starts here +_supported_os Linux +_require_scratch_reflink +_require_cp_reflink +_need_to_be_root +_require_dm_target error +_require_odirect + +rm -f $seqres.full + + +echo "Format and mount" +_scratch_mkfs > $seqres.full 2>&1 +_dmerror_init +_dmerror_mount >> $seqres.full 2>&1 + +testdir=$SCRATCH_MNT/test-$seq +mkdir $testdir + +blksz=65536 +nr=640 +bufnr=128 +filesize=$((blksz * nr)) +bufsize=$((blksz * bufnr)) + +_require_fs_space $SCRATCH_MNT $((filesize / 1024 * 3 * 5 / 4)) + +echo "Create the original files" +$XFS_IO_PROG -f -c "pwrite -S 0x61 -b $bufsize 0 $filesize" $testdir/file1 >> $seqres.full +_cp_reflink $testdir/file1 $testdir/file2 >> $seqres.full +_dmerror_unmount +_dmerror_mount + +echo "Compare files" +md5sum $testdir/file1 | _filter_scratch +md5sum $testdir/file2 | _filter_scratch + +echo "CoW and unmount" +sync +_dmerror_load_error_table +$XFS_IO_PROG -d -f -c "pwrite -S 0x63 -b $bufsize 0 $filesize" $testdir/file2 >> $seqres.full +_dmerror_load_working_table +_dmerror_unmount +_dmerror_mount + +echo "Compare files" +md5sum $testdir/file1 | _filter_scratch + +echo "Check for damage" +_dmerror_unmount +_dmerror_cleanup +_repair_scratch_fs >> $seqres.full + +# success, all done +status=0 +exit diff --git a/tests/generic/271.out b/tests/generic/271.out new file mode 100644 index 0000000..f7ea004 --- /dev/null +++ b/tests/generic/271.out @@ -0,0 +1,11 @@ +QA output created by 271 +Format and mount +Create the original files +Compare files +1886e67cf8783e89ce6ddc5bb09a3944 SCRATCH_MNT/test-271/file1 +1886e67cf8783e89ce6ddc5bb09a3944 SCRATCH_MNT/test-271/file2 +CoW and unmount +pwrite64: Input/output error +Compare files +1886e67cf8783e89ce6ddc5bb09a3944 SCRATCH_MNT/test-271/file1 +Check for damage diff --git a/tests/generic/272 b/tests/generic/272 new file mode 100755 index 0000000..7560214 --- /dev/null +++ b/tests/generic/272 @@ -0,0 +1,98 @@ +#! /bin/bash +# FS QA Test No. 272 +# +# Test DIO CoW behavior when the write permanently fails. +# +#----------------------------------------------------------------------- +# Copyright (c) 2016, Oracle and/or its affiliates. All Rights Reserved. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it would be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write the Free Software Foundation, +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +#----------------------------------------------------------------------- + +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 15 + +_cleanup() +{ + cd / + rm -rf $tmp.* + _dmerror_cleanup +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter +. ./common/reflink +. ./common/dmerror + +# real QA test starts here +_supported_os Linux +_require_scratch_reflink +_require_cp_reflink +_need_to_be_root +_require_dm_target error +_require_odirect + +rm -f $seqres.full + + +echo "Format and mount" +_scratch_mkfs > $seqres.full 2>&1 +_dmerror_init +_dmerror_mount >> $seqres.full 2>&1 + +testdir=$SCRATCH_MNT/test-$seq +mkdir $testdir + +blksz=65536 +nr=640 +bufnr=128 +filesize=$((blksz * nr)) +bufsize=$((blksz * bufnr)) + +_require_fs_space $SCRATCH_MNT $((filesize / 1024 * 3 * 5 / 4)) + +echo "Create the original files" +$XFS_IO_PROG -f -c "pwrite -S 0x61 -b $bufsize 0 $filesize" $testdir/file1 >> $seqres.full +_cp_reflink $testdir/file1 $testdir/file2 >> $seqres.full +_dmerror_unmount +_dmerror_mount + +echo "Compare files" +md5sum $testdir/file1 | _filter_scratch +md5sum $testdir/file2 | _filter_scratch + +echo "CoW and unmount" +sync +_dmerror_load_error_table +$XFS_IO_PROG -d -f -c "pwrite -S 0x63 -b $bufsize 0 $filesize" $testdir/file2 >> $seqres.full + +echo "Clean up the mess" +_dmerror_unmount +_dmerror_cleanup +_repair_scratch_fs >> $seqres.full +_scratch_mount >> $seqres.full 2>&1 + +echo "Compare files" +md5sum $testdir/file1 | _filter_scratch + +# success, all done +status=0 +exit diff --git a/tests/generic/272.out b/tests/generic/272.out new file mode 100644 index 0000000..e21e4a8 --- /dev/null +++ b/tests/generic/272.out @@ -0,0 +1,11 @@ +QA output created by 272 +Format and mount +Create the original files +Compare files +1886e67cf8783e89ce6ddc5bb09a3944 SCRATCH_MNT/test-272/file1 +1886e67cf8783e89ce6ddc5bb09a3944 SCRATCH_MNT/test-272/file2 +CoW and unmount +pwrite64: Input/output error +Clean up the mess +Compare files +1886e67cf8783e89ce6ddc5bb09a3944 SCRATCH_MNT/test-272/file1 diff --git a/tests/generic/276 b/tests/generic/276 new file mode 100755 index 0000000..560daba --- /dev/null +++ b/tests/generic/276 @@ -0,0 +1,101 @@ +#! /bin/bash +# FS QA Test No. 276 +# +# Test DIO CoW behavior when the write temporarily fails and we unmount. +# +#----------------------------------------------------------------------- +# Copyright (c) 2016, Oracle and/or its affiliates. All Rights Reserved. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it would be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write the Free Software Foundation, +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +#----------------------------------------------------------------------- + +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 15 + +_cleanup() +{ + cd / + rm -rf $tmp.* + _dmerror_cleanup +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter +. ./common/reflink +. ./common/dmerror + +# real QA test starts here +_supported_os Linux +_require_scratch_reflink +_require_cp_reflink +_need_to_be_root +_require_dm_target error +_require_odirect + +rm -f $seqres.full + + +echo "Format and mount" +_scratch_mkfs > $seqres.full 2>&1 +_dmerror_init +_dmerror_mount >> $seqres.full 2>&1 + +testdir=$SCRATCH_MNT/test-$seq +mkdir $testdir + +blksz=65536 +nr=640 +bufnr=128 +filesize=$((blksz * nr)) +bufsize=$((blksz * bufnr)) + +_require_fs_space $SCRATCH_MNT $((filesize / 1024 * 3 * 5 / 4)) + +echo "Create the original files" +$XFS_IO_PROG -f -c "pwrite -S 0x61 -b $bufsize 0 $filesize" $testdir/file1 >> $seqres.full +_cp_reflink $testdir/file1 $testdir/file2 >> $seqres.full +_dmerror_unmount +_dmerror_mount + +echo "Compare files" +md5sum $testdir/file1 | _filter_scratch +md5sum $testdir/file2 | _filter_scratch + +echo "CoW and unmount" +sync +_dmerror_load_error_table +$XFS_IO_PROG -d -f -c "pwrite -S 0x63 -b $bufsize 0 $filesize" $testdir/file2 >> $seqres.full +_dmerror_load_working_table +rm -rf $testdir/file2 >> $seqres.full 2>&1 +_dmerror_unmount +_dmerror_mount + +echo "Compare files" +md5sum $testdir/file1 | _filter_scratch + +echo "Check for damage" +_dmerror_unmount +_dmerror_cleanup +_repair_scratch_fs >> $seqres.full + +# success, all done +status=0 +exit diff --git a/tests/generic/276.out b/tests/generic/276.out new file mode 100644 index 0000000..e2aeacf --- /dev/null +++ b/tests/generic/276.out @@ -0,0 +1,11 @@ +QA output created by 276 +Format and mount +Create the original files +Compare files +1886e67cf8783e89ce6ddc5bb09a3944 SCRATCH_MNT/test-276/file1 +1886e67cf8783e89ce6ddc5bb09a3944 SCRATCH_MNT/test-276/file2 +CoW and unmount +pwrite64: Input/output error +Compare files +1886e67cf8783e89ce6ddc5bb09a3944 SCRATCH_MNT/test-276/file1 +Check for damage diff --git a/tests/generic/278 b/tests/generic/278 new file mode 100755 index 0000000..6d0c828 --- /dev/null +++ b/tests/generic/278 @@ -0,0 +1,104 @@ +#! /bin/bash +# FS QA Test No. 278 +# +# Test DIO CoW behavior when the write temporarily fails but the userspace +# program writes again. +# +#----------------------------------------------------------------------- +# Copyright (c) 2016, Oracle and/or its affiliates. All Rights Reserved. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it would be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write the Free Software Foundation, +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +#----------------------------------------------------------------------- + +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 15 + +_cleanup() +{ + cd / + rm -rf $tmp.* + _dmerror_cleanup +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter +. ./common/reflink +. ./common/dmerror + +# real QA test starts here +_supported_os Linux +_require_scratch_reflink +_require_cp_reflink +_need_to_be_root +_require_dm_target error +_require_odirect + +rm -f $seqres.full + + +echo "Format and mount" +_scratch_mkfs > $seqres.full 2>&1 +_dmerror_init +_dmerror_mount >> $seqres.full 2>&1 + +testdir=$SCRATCH_MNT/test-$seq +mkdir $testdir + +blksz=65536 +nr=640 +filesize=$((blksz * nr)) +bufnr=128 +bufsize=$((blksz * bufnr)) + +_require_fs_space $SCRATCH_MNT $((filesize / 1024 * 3 * 5 / 4)) + +echo "Create the original files" +$XFS_IO_PROG -f -c "pwrite -S 0x61 -b $bufsize 0 $filesize" $testdir/file1 >> $seqres.full +_cp_reflink $testdir/file1 $testdir/file2 >> $seqres.full +_dmerror_unmount +_dmerror_mount + +echo "Compare files" +md5sum $testdir/file1 | _filter_scratch +md5sum $testdir/file2 | _filter_scratch + +echo "CoW and unmount" +sync +_dmerror_load_error_table +$XFS_IO_PROG -d -f -c "pwrite -S 0x63 -b $bufsize 0 $filesize" $testdir/file2 >> $seqres.full +_dmerror_load_working_table + +echo "Rewrite" +$XFS_IO_PROG -d -f -c "pwrite -S 0x64 -b $bufsize 0 $filesize" $testdir/file2 >> $seqres.full 2>&1 +_dmerror_unmount +_dmerror_mount + +echo "Compare files" +md5sum $testdir/file1 | _filter_scratch + +echo "Check for damage" +_dmerror_unmount +_dmerror_cleanup +_repair_scratch_fs >> $seqres.full + +# success, all done +status=0 +exit diff --git a/tests/generic/278.out b/tests/generic/278.out new file mode 100644 index 0000000..6723b73 --- /dev/null +++ b/tests/generic/278.out @@ -0,0 +1,12 @@ +QA output created by 278 +Format and mount +Create the original files +Compare files +1886e67cf8783e89ce6ddc5bb09a3944 SCRATCH_MNT/test-278/file1 +1886e67cf8783e89ce6ddc5bb09a3944 SCRATCH_MNT/test-278/file2 +CoW and unmount +pwrite64: Input/output error +Rewrite +Compare files +1886e67cf8783e89ce6ddc5bb09a3944 SCRATCH_MNT/test-278/file1 +Check for damage diff --git a/tests/generic/279 b/tests/generic/279 new file mode 100755 index 0000000..67da34b --- /dev/null +++ b/tests/generic/279 @@ -0,0 +1,100 @@ +#! /bin/bash +# FS QA Test No. 279 +# +# Test mmap CoW behavior when the write temporarily fails. +# +#----------------------------------------------------------------------- +# Copyright (c) 2016, Oracle and/or its affiliates. All Rights Reserved. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it would be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write the Free Software Foundation, +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +#----------------------------------------------------------------------- + +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 15 + +_cleanup() +{ + cd / + rm -rf $tmp.* $TEST_DIR/mwrite.out + _dmerror_cleanup +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter +. ./common/reflink +. ./common/dmerror + +# real QA test starts here +_supported_os Linux +_require_scratch_reflink +_require_cp_reflink +_need_to_be_root +_require_dm_target error + +rm -f $seqres.full + + +echo "Format and mount" +_scratch_mkfs > $seqres.full 2>&1 +_dmerror_init +_dmerror_mount >> $seqres.full 2>&1 + +testdir=$SCRATCH_MNT/test-$seq +mkdir $testdir + +blksz=65536 +nr=640 +bufnr=128 +filesize=$((blksz * nr)) +bufsize=$((blksz * bufnr)) + +_require_fs_space $SCRATCH_MNT $((filesize / 1024 * 3 * 5 / 4)) + +echo "Create the original files" +$XFS_IO_PROG -f -c "pwrite -S 0x61 -b $bufsize 0 $filesize" $testdir/file1 >> $seqres.full +_cp_reflink $testdir/file1 $testdir/file2 >> $seqres.full +_dmerror_unmount +_dmerror_mount + +echo "Compare files" +md5sum $testdir/file1 | _filter_scratch +md5sum $testdir/file2 | _filter_scratch + +echo "CoW and unmount" +sync +_dmerror_load_error_table +urk=$($XFS_IO_PROG -f -c "mmap -rw 0 $filesize" -c "mwrite -S 0x63 0 $filesize" -c "msync -s 0 $filesize" $testdir/file2 > $TEST_DIR/mwrite.out 2>&1) +cat $TEST_DIR/mwrite.out | tee -a $seqres.full +_dmerror_load_working_table +_dmerror_unmount +_dmerror_mount + +echo "Compare files" +md5sum $testdir/file1 | _filter_scratch + +echo "Check for damage" +_dmerror_unmount +_dmerror_cleanup +_repair_scratch_fs >> $seqres.full + +# success, all done +status=0 +exit diff --git a/tests/generic/279.out b/tests/generic/279.out new file mode 100644 index 0000000..f34c2b2 --- /dev/null +++ b/tests/generic/279.out @@ -0,0 +1,11 @@ +QA output created by 279 +Format and mount +Create the original files +Compare files +1886e67cf8783e89ce6ddc5bb09a3944 SCRATCH_MNT/test-279/file1 +1886e67cf8783e89ce6ddc5bb09a3944 SCRATCH_MNT/test-279/file2 +CoW and unmount +msync: Input/output error +Compare files +1886e67cf8783e89ce6ddc5bb09a3944 SCRATCH_MNT/test-279/file1 +Check for damage diff --git a/tests/generic/281 b/tests/generic/281 new file mode 100755 index 0000000..71e3dd7 --- /dev/null +++ b/tests/generic/281 @@ -0,0 +1,98 @@ +#! /bin/bash +# FS QA Test No. 281 +# +# Test mmap CoW behavior when the write permanently fails. +# +#----------------------------------------------------------------------- +# Copyright (c) 2016, Oracle and/or its affiliates. All Rights Reserved. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it would be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write the Free Software Foundation, +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +#----------------------------------------------------------------------- + +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 15 + +_cleanup() +{ + cd / + rm -rf $tmp.* $TEST_DIR/mwrite.out + _dmerror_cleanup +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter +. ./common/reflink +. ./common/dmerror + +# real QA test starts here +_supported_os Linux +_require_scratch_reflink +_require_cp_reflink +_need_to_be_root +_require_dm_target error + +rm -f $seqres.full + + +echo "Format and mount" +_scratch_mkfs > $seqres.full 2>&1 +_dmerror_init +_dmerror_mount >> $seqres.full 2>&1 + +testdir=$SCRATCH_MNT/test-$seq +mkdir $testdir + +blksz=65536 +nr=640 +bufnr=128 +filesize=$((blksz * nr)) +bufsize=$((blksz * bufnr)) + +_require_fs_space $SCRATCH_MNT $((filesize / 1024 * 3 * 5 / 4)) + +echo "Create the original files" +$XFS_IO_PROG -f -c "pwrite -S 0x61 -b $bufsize 0 $filesize" $testdir/file1 >> $seqres.full +_cp_reflink $testdir/file1 $testdir/file2 >> $seqres.full +_dmerror_unmount +_dmerror_mount + +echo "Compare files" +md5sum $testdir/file1 | _filter_scratch +md5sum $testdir/file2 | _filter_scratch + +echo "CoW and unmount" +sync +_dmerror_load_error_table +urk=$($XFS_IO_PROG -f -c "mmap -rw 0 $filesize" -c "mwrite -S 0x63 0 $filesize" -c "msync -s 0 $filesize" $testdir/file2 > $TEST_DIR/mwrite.out 2>&1) +cat $TEST_DIR/mwrite.out | tee -a $seqres.full + +echo "Clean up the mess" +_dmerror_unmount +_dmerror_cleanup +_repair_scratch_fs >> $seqres.full +_scratch_mount >> $seqres.full 2>&1 + +echo "Compare files" +md5sum $testdir/file1 | _filter_scratch + +# success, all done +status=0 +exit diff --git a/tests/generic/281.out b/tests/generic/281.out new file mode 100644 index 0000000..a2d8e3f --- /dev/null +++ b/tests/generic/281.out @@ -0,0 +1,11 @@ +QA output created by 281 +Format and mount +Create the original files +Compare files +1886e67cf8783e89ce6ddc5bb09a3944 SCRATCH_MNT/test-281/file1 +1886e67cf8783e89ce6ddc5bb09a3944 SCRATCH_MNT/test-281/file2 +CoW and unmount +msync: Input/output error +Clean up the mess +Compare files +1886e67cf8783e89ce6ddc5bb09a3944 SCRATCH_MNT/test-281/file1 diff --git a/tests/generic/282 b/tests/generic/282 new file mode 100755 index 0000000..38714e0 --- /dev/null +++ b/tests/generic/282 @@ -0,0 +1,101 @@ +#! /bin/bash +# FS QA Test No. 282 +# +# Test mmap CoW behavior when the write temporarily fails and we unmount. +# +#----------------------------------------------------------------------- +# Copyright (c) 2016, Oracle and/or its affiliates. All Rights Reserved. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it would be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write the Free Software Foundation, +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +#----------------------------------------------------------------------- + +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 15 + +_cleanup() +{ + cd / + rm -rf $tmp.* $TEST_DIR/mwrite.out + _dmerror_cleanup +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter +. ./common/reflink +. ./common/dmerror + +# real QA test starts here +_supported_os Linux +_require_scratch_reflink +_require_cp_reflink +_need_to_be_root +_require_dm_target error + +rm -f $seqres.full + + +echo "Format and mount" +_scratch_mkfs > $seqres.full 2>&1 +_dmerror_init +_dmerror_mount >> $seqres.full 2>&1 + +testdir=$SCRATCH_MNT/test-$seq +mkdir $testdir + +blksz=65536 +nr=640 +bufnr=128 +filesize=$((blksz * nr)) +bufsize=$((blksz * bufnr)) + +_require_fs_space $SCRATCH_MNT $((filesize / 1024 * 3 * 5 / 4)) + +echo "Create the original files" +$XFS_IO_PROG -f -c "pwrite -S 0x61 -b $bufsize 0 $filesize" $testdir/file1 >> $seqres.full +_cp_reflink $testdir/file1 $testdir/file2 >> $seqres.full +_dmerror_unmount +_dmerror_mount + +echo "Compare files" +md5sum $testdir/file1 | _filter_scratch +md5sum $testdir/file2 | _filter_scratch + +echo "CoW and unmount" +sync +_dmerror_load_error_table +urk=$($XFS_IO_PROG -f -c "mmap -rw 0 $filesize" -c "mwrite -S 0x63 0 $filesize" $testdir/file2 > $TEST_DIR/mwrite.out 2>&1) +cat $TEST_DIR/mwrite.out | tee -a $seqres.full +_dmerror_load_working_table +rm -rf $testdir/file2 >> $seqres.full 2>&1 +_dmerror_unmount +_dmerror_mount + +echo "Compare files" +md5sum $testdir/file1 | _filter_scratch + +echo "Check for damage" +_dmerror_unmount +_dmerror_cleanup +_repair_scratch_fs >> $seqres.full + +# success, all done +status=0 +exit diff --git a/tests/generic/282.out b/tests/generic/282.out new file mode 100644 index 0000000..624dbfa --- /dev/null +++ b/tests/generic/282.out @@ -0,0 +1,10 @@ +QA output created by 282 +Format and mount +Create the original files +Compare files +1886e67cf8783e89ce6ddc5bb09a3944 SCRATCH_MNT/test-282/file1 +1886e67cf8783e89ce6ddc5bb09a3944 SCRATCH_MNT/test-282/file2 +CoW and unmount +Compare files +1886e67cf8783e89ce6ddc5bb09a3944 SCRATCH_MNT/test-282/file1 +Check for damage diff --git a/tests/generic/283 b/tests/generic/283 new file mode 100755 index 0000000..6d8701f --- /dev/null +++ b/tests/generic/283 @@ -0,0 +1,104 @@ +#! /bin/bash +# FS QA Test No. 283 +# +# Test mmap CoW behavior when the write temporarily fails but the userspace +# program writes again. +# +#----------------------------------------------------------------------- +# Copyright (c) 2016, Oracle and/or its affiliates. All Rights Reserved. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it would be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write the Free Software Foundation, +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +#----------------------------------------------------------------------- + +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 15 + +_cleanup() +{ + cd / + rm -rf $tmp.* $TEST_DIR/mwrite.out + _dmerror_cleanup +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter +. ./common/reflink +. ./common/dmerror + +# real QA test starts here +_supported_os Linux +_require_scratch_reflink +_require_cp_reflink +_need_to_be_root +_require_dm_target error + +rm -f $seqres.full + + +echo "Format and mount" +_scratch_mkfs > $seqres.full 2>&1 +_dmerror_init +_dmerror_mount >> $seqres.full 2>&1 + +testdir=$SCRATCH_MNT/test-$seq +mkdir $testdir + +blksz=65536 +nr=640 +bufnr=128 +filesize=$((blksz * nr)) +bufsize=$((blksz * bufnr)) + +_require_fs_space $SCRATCH_MNT $((filesize / 1024 * 3 * 5 / 4)) + +echo "Create the original files" +$XFS_IO_PROG -f -c "pwrite -S 0x61 -b $bufsize 0 $filesize" $testdir/file1 >> $seqres.full +_cp_reflink $testdir/file1 $testdir/file2 >> $seqres.full +_dmerror_unmount +_dmerror_mount + +echo "Compare files" +md5sum $testdir/file1 | _filter_scratch +md5sum $testdir/file2 | _filter_scratch + +echo "CoW and unmount" +sync +_dmerror_load_error_table +urk=$($XFS_IO_PROG -f -c "mmap -rw 0 $filesize" -c "mwrite -S 0x63 0 $filesize" -c "msync -s 0 $filesize" $testdir/file2 > $TEST_DIR/mwrite.out 2>&1) +cat $TEST_DIR/mwrite.out | tee -a $seqres.full +_dmerror_load_working_table + +echo "Rewrite" +$XFS_IO_PROG -f -c "mmap -rw 0 $filesize" -c "mwrite -S 0x63 0 $filesize" -c "msync 0 $filesize" $testdir/file2 >> $seqres.full 2>&1 +_dmerror_unmount +_dmerror_mount + +echo "Compare files" +md5sum $testdir/file1 | _filter_scratch + +echo "Check for damage" +_dmerror_unmount +_dmerror_cleanup +_repair_scratch_fs >> $seqres.full + +# success, all done +status=0 +exit diff --git a/tests/generic/283.out b/tests/generic/283.out new file mode 100644 index 0000000..f9fd5c8 --- /dev/null +++ b/tests/generic/283.out @@ -0,0 +1,12 @@ +QA output created by 283 +Format and mount +Create the original files +Compare files +1886e67cf8783e89ce6ddc5bb09a3944 SCRATCH_MNT/test-283/file1 +1886e67cf8783e89ce6ddc5bb09a3944 SCRATCH_MNT/test-283/file2 +CoW and unmount +msync: Input/output error +Rewrite +Compare files +1886e67cf8783e89ce6ddc5bb09a3944 SCRATCH_MNT/test-283/file1 +Check for damage diff --git a/tests/generic/group b/tests/generic/group index b768882..b4a180e 100644 --- a/tests/generic/group +++ b/tests/generic/group @@ -267,13 +267,25 @@ 262 auto quick clone 263 rw auto quick 264 auto quick clone +265 auto quick clone +266 auto quick clone +267 auto quick clone +268 auto quick clone 269 auto rw prealloc ioctl enospc stress 270 auto quota rw prealloc ioctl enospc stress +271 auto quick clone +272 auto quick clone 273 auto rw 274 auto rw prealloc 275 auto rw enospc +276 auto quick clone 277 auto ioctl quick metadata +278 auto quick clone +279 auto quick clone 280 auto quota freeze dangerous +281 auto quick clone +282 auto quick clone +283 auto quick clone 285 auto rw 286 auto quick other 288 auto quick ioctl trim
WARNING: multiple messages have this Message-ID (diff)
From: "Darrick J. Wong" <darrick.wong@oracle.com> To: david@fromorbit.com, darrick.wong@oracle.com Cc: fstests@vger.kernel.org, linux-btrfs@vger.kernel.org, xfs@oss.sgi.com Subject: [PATCH 14/32] reflink: test CoW behavior with IO errors Date: Thu, 11 Feb 2016 15:40:50 -0800 [thread overview] Message-ID: <20160211234050.2202.4569.stgit@birch.djwong.org> (raw) In-Reply-To: <20160211233916.2202.40961.stgit@birch.djwong.org> Test various scenarios (with dm-flakey) where we simulate write failures during CoW, to see if the FS can get through it without blowing up or corrupting data. Plumb in a FS-generic method to sort out repairing filesystems after they get hit by IO errors. Signed-off-by: Darrick J. Wong <darrick.wong@oracle.com> --- tests/generic/265 | 99 +++++++++++++++++++++++++++++++++++++++++++++++ tests/generic/265.out | 11 +++++ tests/generic/266 | 97 ++++++++++++++++++++++++++++++++++++++++++++++ tests/generic/266.out | 11 +++++ tests/generic/267 | 100 +++++++++++++++++++++++++++++++++++++++++++++++ tests/generic/267.out | 10 +++++ tests/generic/268 | 103 +++++++++++++++++++++++++++++++++++++++++++++++++ tests/generic/268.out | 12 ++++++ tests/generic/271 | 100 +++++++++++++++++++++++++++++++++++++++++++++++ tests/generic/271.out | 11 +++++ tests/generic/272 | 98 ++++++++++++++++++++++++++++++++++++++++++++++ tests/generic/272.out | 11 +++++ tests/generic/276 | 101 ++++++++++++++++++++++++++++++++++++++++++++++++ tests/generic/276.out | 11 +++++ tests/generic/278 | 104 +++++++++++++++++++++++++++++++++++++++++++++++++ tests/generic/278.out | 12 ++++++ tests/generic/279 | 100 +++++++++++++++++++++++++++++++++++++++++++++++ tests/generic/279.out | 11 +++++ tests/generic/281 | 98 ++++++++++++++++++++++++++++++++++++++++++++++ tests/generic/281.out | 11 +++++ tests/generic/282 | 101 ++++++++++++++++++++++++++++++++++++++++++++++++ tests/generic/282.out | 10 +++++ tests/generic/283 | 104 +++++++++++++++++++++++++++++++++++++++++++++++++ tests/generic/283.out | 12 ++++++ tests/generic/group | 12 ++++++ 25 files changed, 1350 insertions(+) create mode 100755 tests/generic/265 create mode 100644 tests/generic/265.out create mode 100755 tests/generic/266 create mode 100644 tests/generic/266.out create mode 100755 tests/generic/267 create mode 100644 tests/generic/267.out create mode 100755 tests/generic/268 create mode 100644 tests/generic/268.out create mode 100755 tests/generic/271 create mode 100644 tests/generic/271.out create mode 100755 tests/generic/272 create mode 100644 tests/generic/272.out create mode 100755 tests/generic/276 create mode 100644 tests/generic/276.out create mode 100755 tests/generic/278 create mode 100644 tests/generic/278.out create mode 100755 tests/generic/279 create mode 100644 tests/generic/279.out create mode 100755 tests/generic/281 create mode 100644 tests/generic/281.out create mode 100755 tests/generic/282 create mode 100644 tests/generic/282.out create mode 100755 tests/generic/283 create mode 100644 tests/generic/283.out diff --git a/tests/generic/265 b/tests/generic/265 new file mode 100755 index 0000000..607867d --- /dev/null +++ b/tests/generic/265 @@ -0,0 +1,99 @@ +#! /bin/bash +# FS QA Test No. 265 +# +# Test CoW behavior when the write temporarily fails. +# +#----------------------------------------------------------------------- +# Copyright (c) 2016, Oracle and/or its affiliates. All Rights Reserved. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it would be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write the Free Software Foundation, +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +#----------------------------------------------------------------------- + +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 15 + +_cleanup() +{ + cd / + rm -rf $tmp.* + _dmerror_cleanup +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter +. ./common/reflink +. ./common/dmerror + +# real QA test starts here +_supported_os Linux +_require_scratch_reflink +_require_cp_reflink +_need_to_be_root +_require_dm_target error + +rm -f $seqres.full + + +echo "Format and mount" +_scratch_mkfs > $seqres.full 2>&1 +_dmerror_init +_dmerror_mount >> $seqres.full 2>&1 + +testdir=$SCRATCH_MNT/test-$seq +mkdir $testdir + +blksz=65536 +nr=640 +bufnr=128 +filesize=$((blksz * nr)) +bufsize=$((blksz * bufnr)) + +_require_fs_space $SCRATCH_MNT $((filesize / 1024 * 3 * 5 / 4)) + +echo "Create the original files" +$XFS_IO_PROG -f -c "pwrite -S 0x61 -b $bufsize 0 $filesize" $testdir/file1 >> $seqres.full +_cp_reflink $testdir/file1 $testdir/file2 >> $seqres.full +_dmerror_unmount +_dmerror_mount + +echo "Compare files" +md5sum $testdir/file1 | _filter_scratch +md5sum $testdir/file2 | _filter_scratch + +echo "CoW and unmount" +sync +_dmerror_load_error_table +$XFS_IO_PROG -f -c "pwrite -S 0x63 -b $bufsize 0 $filesize" -c "fdatasync" $testdir/file2 >> $seqres.full +_dmerror_load_working_table +_dmerror_unmount +_dmerror_mount + +echo "Compare files" +md5sum $testdir/file1 | _filter_scratch + +echo "Check for damage" +_dmerror_unmount +_dmerror_cleanup +_repair_scratch_fs >> $seqres.full + +# success, all done +status=0 +exit diff --git a/tests/generic/265.out b/tests/generic/265.out new file mode 100644 index 0000000..1b67114 --- /dev/null +++ b/tests/generic/265.out @@ -0,0 +1,11 @@ +QA output created by 265 +Format and mount +Create the original files +Compare files +1886e67cf8783e89ce6ddc5bb09a3944 SCRATCH_MNT/test-265/file1 +1886e67cf8783e89ce6ddc5bb09a3944 SCRATCH_MNT/test-265/file2 +CoW and unmount +fdatasync: Input/output error +Compare files +1886e67cf8783e89ce6ddc5bb09a3944 SCRATCH_MNT/test-265/file1 +Check for damage diff --git a/tests/generic/266 b/tests/generic/266 new file mode 100755 index 0000000..102df76 --- /dev/null +++ b/tests/generic/266 @@ -0,0 +1,97 @@ +#! /bin/bash +# FS QA Test No. 266 +# +# Test CoW behavior when the write permanently fails. +# +#----------------------------------------------------------------------- +# Copyright (c) 2016, Oracle and/or its affiliates. All Rights Reserved. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it would be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write the Free Software Foundation, +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +#----------------------------------------------------------------------- + +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 15 + +_cleanup() +{ + cd / + rm -rf $tmp.* + _dmerror_cleanup +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter +. ./common/reflink +. ./common/dmerror + +# real QA test starts here +_supported_os Linux +_require_scratch_reflink +_require_cp_reflink +_need_to_be_root +_require_dm_target error + +rm -f $seqres.full + + +echo "Format and mount" +_scratch_mkfs > $seqres.full 2>&1 +_dmerror_init +_dmerror_mount >> $seqres.full 2>&1 + +testdir=$SCRATCH_MNT/test-$seq +mkdir $testdir + +blksz=65536 +nr=640 +bufnr=128 +filesize=$((blksz * nr)) +bufsize=$((blksz * bufnr)) + +_require_fs_space $SCRATCH_MNT $((filesize / 1024 * 3 * 5 / 4)) + +echo "Create the original files" +$XFS_IO_PROG -f -c "pwrite -S 0x61 -b $bufsize 0 $filesize" $testdir/file1 >> $seqres.full +_cp_reflink $testdir/file1 $testdir/file2 >> $seqres.full +_dmerror_unmount +_dmerror_mount + +echo "Compare files" +md5sum $testdir/file1 | _filter_scratch +md5sum $testdir/file2 | _filter_scratch + +echo "CoW and unmount" +sync +_dmerror_load_error_table +$XFS_IO_PROG -f -c "pwrite -S 0x63 -b $bufsize 0 $filesize" -c "fdatasync" $testdir/file2 >> $seqres.full + +echo "Clean up the mess" +_dmerror_unmount +_dmerror_cleanup +_repair_scratch_fs >> $seqres.full +_scratch_mount >> $seqres.full 2>&1 + +echo "Compare files" +md5sum $testdir/file1 | _filter_scratch + +# success, all done +status=0 +exit diff --git a/tests/generic/266.out b/tests/generic/266.out new file mode 100644 index 0000000..dd34ad3 --- /dev/null +++ b/tests/generic/266.out @@ -0,0 +1,11 @@ +QA output created by 266 +Format and mount +Create the original files +Compare files +1886e67cf8783e89ce6ddc5bb09a3944 SCRATCH_MNT/test-266/file1 +1886e67cf8783e89ce6ddc5bb09a3944 SCRATCH_MNT/test-266/file2 +CoW and unmount +fdatasync: Input/output error +Clean up the mess +Compare files +1886e67cf8783e89ce6ddc5bb09a3944 SCRATCH_MNT/test-266/file1 diff --git a/tests/generic/267 b/tests/generic/267 new file mode 100755 index 0000000..24b7b7c --- /dev/null +++ b/tests/generic/267 @@ -0,0 +1,100 @@ +#! /bin/bash +# FS QA Test No. 267 +# +# Test CoW behavior when the write temporarily fails and we unmount. +# +#----------------------------------------------------------------------- +# Copyright (c) 2016, Oracle and/or its affiliates. All Rights Reserved. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it would be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write the Free Software Foundation, +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +#----------------------------------------------------------------------- + +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 15 + +_cleanup() +{ + cd / + rm -rf $tmp.* + _dmerror_cleanup +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter +. ./common/reflink +. ./common/dmerror + +# real QA test starts here +_supported_os Linux +_require_scratch_reflink +_require_cp_reflink +_need_to_be_root +_require_dm_target error + +rm -f $seqres.full + + +echo "Format and mount" +_scratch_mkfs > $seqres.full 2>&1 +_dmerror_init +_dmerror_mount >> $seqres.full 2>&1 + +testdir=$SCRATCH_MNT/test-$seq +mkdir $testdir + +blksz=65536 +nr=640 +bufnr=128 +filesize=$((blksz * nr)) +bufsize=$((blksz * bufnr)) + +_require_fs_space $SCRATCH_MNT $((filesize / 1024 * 3 * 5 / 4)) + +echo "Create the original files" +$XFS_IO_PROG -f -c "pwrite -S 0x61 -b $bufsize 0 $filesize" $testdir/file1 >> $seqres.full +_cp_reflink $testdir/file1 $testdir/file2 >> $seqres.full +_dmerror_unmount +_dmerror_mount + +echo "Compare files" +md5sum $testdir/file1 | _filter_scratch +md5sum $testdir/file2 | _filter_scratch + +echo "CoW and unmount" +sync +_dmerror_load_error_table +$XFS_IO_PROG -f -c "pwrite -S 0x63 -b $bufsize 0 $filesize" $testdir/file2 >> $seqres.full +_dmerror_load_working_table +rm -rf $testdir/file2 >> $seqres.full 2>&1 +_dmerror_unmount +_dmerror_mount + +echo "Compare files" +md5sum $testdir/file1 | _filter_scratch + +echo "Check for damage" +_dmerror_unmount +_dmerror_cleanup +_repair_scratch_fs >> $seqres.full + +# success, all done +status=0 +exit diff --git a/tests/generic/267.out b/tests/generic/267.out new file mode 100644 index 0000000..3c58e67 --- /dev/null +++ b/tests/generic/267.out @@ -0,0 +1,10 @@ +QA output created by 267 +Format and mount +Create the original files +Compare files +1886e67cf8783e89ce6ddc5bb09a3944 SCRATCH_MNT/test-267/file1 +1886e67cf8783e89ce6ddc5bb09a3944 SCRATCH_MNT/test-267/file2 +CoW and unmount +Compare files +1886e67cf8783e89ce6ddc5bb09a3944 SCRATCH_MNT/test-267/file1 +Check for damage diff --git a/tests/generic/268 b/tests/generic/268 new file mode 100755 index 0000000..c17ea57 --- /dev/null +++ b/tests/generic/268 @@ -0,0 +1,103 @@ +#! /bin/bash +# FS QA Test No. 268 +# +# Test CoW behavior when the write temporarily fails but the userspace +# program writes again. +# +#----------------------------------------------------------------------- +# Copyright (c) 2016, Oracle and/or its affiliates. All Rights Reserved. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it would be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write the Free Software Foundation, +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +#----------------------------------------------------------------------- + +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 15 + +_cleanup() +{ + cd / + rm -rf $tmp.* + _dmerror_cleanup +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter +. ./common/reflink +. ./common/dmerror + +# real QA test starts here +_supported_os Linux +_require_scratch_reflink +_require_cp_reflink +_need_to_be_root +_require_dm_target error + +rm -f $seqres.full + + +echo "Format and mount" +_scratch_mkfs > $seqres.full 2>&1 +_dmerror_init +_dmerror_mount >> $seqres.full 2>&1 + +testdir=$SCRATCH_MNT/test-$seq +mkdir $testdir + +blksz=65536 +nr=640 +bufnr=128 +filesize=$((blksz * nr)) +bufsize=$((blksz * bufnr)) + +_require_fs_space $SCRATCH_MNT $((filesize / 1024 * 3 * 5 / 4)) + +echo "Create the original files" +$XFS_IO_PROG -f -c "pwrite -S 0x61 -b $bufsize 0 $filesize" $testdir/file1 >> $seqres.full +_cp_reflink $testdir/file1 $testdir/file2 >> $seqres.full +_dmerror_unmount +_dmerror_mount + +echo "Compare files" +md5sum $testdir/file1 | _filter_scratch +md5sum $testdir/file2 | _filter_scratch + +echo "CoW and unmount" +sync +_dmerror_load_error_table +$XFS_IO_PROG -f -c "pwrite -S 0x63 -b $bufsize 0 $filesize" -c "fdatasync" $testdir/file2 >> $seqres.full +_dmerror_load_working_table + +echo "Rewrite" +$XFS_IO_PROG -f -c "pwrite -S 0x64 -b $bufsize 0 $filesize" -c "fdatasync" $testdir/file2 >> $seqres.full 2>&1 +_dmerror_unmount +_dmerror_mount + +echo "Compare files" +md5sum $testdir/file1 | _filter_scratch + +echo "Check for damage" +_dmerror_unmount +_dmerror_cleanup +_repair_scratch_fs >> $seqres.full + +# success, all done +status=0 +exit diff --git a/tests/generic/268.out b/tests/generic/268.out new file mode 100644 index 0000000..234e8be --- /dev/null +++ b/tests/generic/268.out @@ -0,0 +1,12 @@ +QA output created by 268 +Format and mount +Create the original files +Compare files +1886e67cf8783e89ce6ddc5bb09a3944 SCRATCH_MNT/test-268/file1 +1886e67cf8783e89ce6ddc5bb09a3944 SCRATCH_MNT/test-268/file2 +CoW and unmount +fdatasync: Input/output error +Rewrite +Compare files +1886e67cf8783e89ce6ddc5bb09a3944 SCRATCH_MNT/test-268/file1 +Check for damage diff --git a/tests/generic/271 b/tests/generic/271 new file mode 100755 index 0000000..955478e --- /dev/null +++ b/tests/generic/271 @@ -0,0 +1,100 @@ +#! /bin/bash +# FS QA Test No. 271 +# +# Test DIO CoW behavior when the write temporarily fails. +# +#----------------------------------------------------------------------- +# Copyright (c) 2016, Oracle and/or its affiliates. All Rights Reserved. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it would be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write the Free Software Foundation, +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +#----------------------------------------------------------------------- + +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 15 + +_cleanup() +{ + cd / + rm -rf $tmp.* + _dmerror_cleanup +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter +. ./common/reflink +. ./common/dmerror + +# real QA test starts here +_supported_os Linux +_require_scratch_reflink +_require_cp_reflink +_need_to_be_root +_require_dm_target error +_require_odirect + +rm -f $seqres.full + + +echo "Format and mount" +_scratch_mkfs > $seqres.full 2>&1 +_dmerror_init +_dmerror_mount >> $seqres.full 2>&1 + +testdir=$SCRATCH_MNT/test-$seq +mkdir $testdir + +blksz=65536 +nr=640 +bufnr=128 +filesize=$((blksz * nr)) +bufsize=$((blksz * bufnr)) + +_require_fs_space $SCRATCH_MNT $((filesize / 1024 * 3 * 5 / 4)) + +echo "Create the original files" +$XFS_IO_PROG -f -c "pwrite -S 0x61 -b $bufsize 0 $filesize" $testdir/file1 >> $seqres.full +_cp_reflink $testdir/file1 $testdir/file2 >> $seqres.full +_dmerror_unmount +_dmerror_mount + +echo "Compare files" +md5sum $testdir/file1 | _filter_scratch +md5sum $testdir/file2 | _filter_scratch + +echo "CoW and unmount" +sync +_dmerror_load_error_table +$XFS_IO_PROG -d -f -c "pwrite -S 0x63 -b $bufsize 0 $filesize" $testdir/file2 >> $seqres.full +_dmerror_load_working_table +_dmerror_unmount +_dmerror_mount + +echo "Compare files" +md5sum $testdir/file1 | _filter_scratch + +echo "Check for damage" +_dmerror_unmount +_dmerror_cleanup +_repair_scratch_fs >> $seqres.full + +# success, all done +status=0 +exit diff --git a/tests/generic/271.out b/tests/generic/271.out new file mode 100644 index 0000000..f7ea004 --- /dev/null +++ b/tests/generic/271.out @@ -0,0 +1,11 @@ +QA output created by 271 +Format and mount +Create the original files +Compare files +1886e67cf8783e89ce6ddc5bb09a3944 SCRATCH_MNT/test-271/file1 +1886e67cf8783e89ce6ddc5bb09a3944 SCRATCH_MNT/test-271/file2 +CoW and unmount +pwrite64: Input/output error +Compare files +1886e67cf8783e89ce6ddc5bb09a3944 SCRATCH_MNT/test-271/file1 +Check for damage diff --git a/tests/generic/272 b/tests/generic/272 new file mode 100755 index 0000000..7560214 --- /dev/null +++ b/tests/generic/272 @@ -0,0 +1,98 @@ +#! /bin/bash +# FS QA Test No. 272 +# +# Test DIO CoW behavior when the write permanently fails. +# +#----------------------------------------------------------------------- +# Copyright (c) 2016, Oracle and/or its affiliates. All Rights Reserved. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it would be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write the Free Software Foundation, +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +#----------------------------------------------------------------------- + +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 15 + +_cleanup() +{ + cd / + rm -rf $tmp.* + _dmerror_cleanup +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter +. ./common/reflink +. ./common/dmerror + +# real QA test starts here +_supported_os Linux +_require_scratch_reflink +_require_cp_reflink +_need_to_be_root +_require_dm_target error +_require_odirect + +rm -f $seqres.full + + +echo "Format and mount" +_scratch_mkfs > $seqres.full 2>&1 +_dmerror_init +_dmerror_mount >> $seqres.full 2>&1 + +testdir=$SCRATCH_MNT/test-$seq +mkdir $testdir + +blksz=65536 +nr=640 +bufnr=128 +filesize=$((blksz * nr)) +bufsize=$((blksz * bufnr)) + +_require_fs_space $SCRATCH_MNT $((filesize / 1024 * 3 * 5 / 4)) + +echo "Create the original files" +$XFS_IO_PROG -f -c "pwrite -S 0x61 -b $bufsize 0 $filesize" $testdir/file1 >> $seqres.full +_cp_reflink $testdir/file1 $testdir/file2 >> $seqres.full +_dmerror_unmount +_dmerror_mount + +echo "Compare files" +md5sum $testdir/file1 | _filter_scratch +md5sum $testdir/file2 | _filter_scratch + +echo "CoW and unmount" +sync +_dmerror_load_error_table +$XFS_IO_PROG -d -f -c "pwrite -S 0x63 -b $bufsize 0 $filesize" $testdir/file2 >> $seqres.full + +echo "Clean up the mess" +_dmerror_unmount +_dmerror_cleanup +_repair_scratch_fs >> $seqres.full +_scratch_mount >> $seqres.full 2>&1 + +echo "Compare files" +md5sum $testdir/file1 | _filter_scratch + +# success, all done +status=0 +exit diff --git a/tests/generic/272.out b/tests/generic/272.out new file mode 100644 index 0000000..e21e4a8 --- /dev/null +++ b/tests/generic/272.out @@ -0,0 +1,11 @@ +QA output created by 272 +Format and mount +Create the original files +Compare files +1886e67cf8783e89ce6ddc5bb09a3944 SCRATCH_MNT/test-272/file1 +1886e67cf8783e89ce6ddc5bb09a3944 SCRATCH_MNT/test-272/file2 +CoW and unmount +pwrite64: Input/output error +Clean up the mess +Compare files +1886e67cf8783e89ce6ddc5bb09a3944 SCRATCH_MNT/test-272/file1 diff --git a/tests/generic/276 b/tests/generic/276 new file mode 100755 index 0000000..560daba --- /dev/null +++ b/tests/generic/276 @@ -0,0 +1,101 @@ +#! /bin/bash +# FS QA Test No. 276 +# +# Test DIO CoW behavior when the write temporarily fails and we unmount. +# +#----------------------------------------------------------------------- +# Copyright (c) 2016, Oracle and/or its affiliates. All Rights Reserved. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it would be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write the Free Software Foundation, +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +#----------------------------------------------------------------------- + +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 15 + +_cleanup() +{ + cd / + rm -rf $tmp.* + _dmerror_cleanup +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter +. ./common/reflink +. ./common/dmerror + +# real QA test starts here +_supported_os Linux +_require_scratch_reflink +_require_cp_reflink +_need_to_be_root +_require_dm_target error +_require_odirect + +rm -f $seqres.full + + +echo "Format and mount" +_scratch_mkfs > $seqres.full 2>&1 +_dmerror_init +_dmerror_mount >> $seqres.full 2>&1 + +testdir=$SCRATCH_MNT/test-$seq +mkdir $testdir + +blksz=65536 +nr=640 +bufnr=128 +filesize=$((blksz * nr)) +bufsize=$((blksz * bufnr)) + +_require_fs_space $SCRATCH_MNT $((filesize / 1024 * 3 * 5 / 4)) + +echo "Create the original files" +$XFS_IO_PROG -f -c "pwrite -S 0x61 -b $bufsize 0 $filesize" $testdir/file1 >> $seqres.full +_cp_reflink $testdir/file1 $testdir/file2 >> $seqres.full +_dmerror_unmount +_dmerror_mount + +echo "Compare files" +md5sum $testdir/file1 | _filter_scratch +md5sum $testdir/file2 | _filter_scratch + +echo "CoW and unmount" +sync +_dmerror_load_error_table +$XFS_IO_PROG -d -f -c "pwrite -S 0x63 -b $bufsize 0 $filesize" $testdir/file2 >> $seqres.full +_dmerror_load_working_table +rm -rf $testdir/file2 >> $seqres.full 2>&1 +_dmerror_unmount +_dmerror_mount + +echo "Compare files" +md5sum $testdir/file1 | _filter_scratch + +echo "Check for damage" +_dmerror_unmount +_dmerror_cleanup +_repair_scratch_fs >> $seqres.full + +# success, all done +status=0 +exit diff --git a/tests/generic/276.out b/tests/generic/276.out new file mode 100644 index 0000000..e2aeacf --- /dev/null +++ b/tests/generic/276.out @@ -0,0 +1,11 @@ +QA output created by 276 +Format and mount +Create the original files +Compare files +1886e67cf8783e89ce6ddc5bb09a3944 SCRATCH_MNT/test-276/file1 +1886e67cf8783e89ce6ddc5bb09a3944 SCRATCH_MNT/test-276/file2 +CoW and unmount +pwrite64: Input/output error +Compare files +1886e67cf8783e89ce6ddc5bb09a3944 SCRATCH_MNT/test-276/file1 +Check for damage diff --git a/tests/generic/278 b/tests/generic/278 new file mode 100755 index 0000000..6d0c828 --- /dev/null +++ b/tests/generic/278 @@ -0,0 +1,104 @@ +#! /bin/bash +# FS QA Test No. 278 +# +# Test DIO CoW behavior when the write temporarily fails but the userspace +# program writes again. +# +#----------------------------------------------------------------------- +# Copyright (c) 2016, Oracle and/or its affiliates. All Rights Reserved. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it would be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write the Free Software Foundation, +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +#----------------------------------------------------------------------- + +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 15 + +_cleanup() +{ + cd / + rm -rf $tmp.* + _dmerror_cleanup +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter +. ./common/reflink +. ./common/dmerror + +# real QA test starts here +_supported_os Linux +_require_scratch_reflink +_require_cp_reflink +_need_to_be_root +_require_dm_target error +_require_odirect + +rm -f $seqres.full + + +echo "Format and mount" +_scratch_mkfs > $seqres.full 2>&1 +_dmerror_init +_dmerror_mount >> $seqres.full 2>&1 + +testdir=$SCRATCH_MNT/test-$seq +mkdir $testdir + +blksz=65536 +nr=640 +filesize=$((blksz * nr)) +bufnr=128 +bufsize=$((blksz * bufnr)) + +_require_fs_space $SCRATCH_MNT $((filesize / 1024 * 3 * 5 / 4)) + +echo "Create the original files" +$XFS_IO_PROG -f -c "pwrite -S 0x61 -b $bufsize 0 $filesize" $testdir/file1 >> $seqres.full +_cp_reflink $testdir/file1 $testdir/file2 >> $seqres.full +_dmerror_unmount +_dmerror_mount + +echo "Compare files" +md5sum $testdir/file1 | _filter_scratch +md5sum $testdir/file2 | _filter_scratch + +echo "CoW and unmount" +sync +_dmerror_load_error_table +$XFS_IO_PROG -d -f -c "pwrite -S 0x63 -b $bufsize 0 $filesize" $testdir/file2 >> $seqres.full +_dmerror_load_working_table + +echo "Rewrite" +$XFS_IO_PROG -d -f -c "pwrite -S 0x64 -b $bufsize 0 $filesize" $testdir/file2 >> $seqres.full 2>&1 +_dmerror_unmount +_dmerror_mount + +echo "Compare files" +md5sum $testdir/file1 | _filter_scratch + +echo "Check for damage" +_dmerror_unmount +_dmerror_cleanup +_repair_scratch_fs >> $seqres.full + +# success, all done +status=0 +exit diff --git a/tests/generic/278.out b/tests/generic/278.out new file mode 100644 index 0000000..6723b73 --- /dev/null +++ b/tests/generic/278.out @@ -0,0 +1,12 @@ +QA output created by 278 +Format and mount +Create the original files +Compare files +1886e67cf8783e89ce6ddc5bb09a3944 SCRATCH_MNT/test-278/file1 +1886e67cf8783e89ce6ddc5bb09a3944 SCRATCH_MNT/test-278/file2 +CoW and unmount +pwrite64: Input/output error +Rewrite +Compare files +1886e67cf8783e89ce6ddc5bb09a3944 SCRATCH_MNT/test-278/file1 +Check for damage diff --git a/tests/generic/279 b/tests/generic/279 new file mode 100755 index 0000000..67da34b --- /dev/null +++ b/tests/generic/279 @@ -0,0 +1,100 @@ +#! /bin/bash +# FS QA Test No. 279 +# +# Test mmap CoW behavior when the write temporarily fails. +# +#----------------------------------------------------------------------- +# Copyright (c) 2016, Oracle and/or its affiliates. All Rights Reserved. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it would be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write the Free Software Foundation, +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +#----------------------------------------------------------------------- + +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 15 + +_cleanup() +{ + cd / + rm -rf $tmp.* $TEST_DIR/mwrite.out + _dmerror_cleanup +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter +. ./common/reflink +. ./common/dmerror + +# real QA test starts here +_supported_os Linux +_require_scratch_reflink +_require_cp_reflink +_need_to_be_root +_require_dm_target error + +rm -f $seqres.full + + +echo "Format and mount" +_scratch_mkfs > $seqres.full 2>&1 +_dmerror_init +_dmerror_mount >> $seqres.full 2>&1 + +testdir=$SCRATCH_MNT/test-$seq +mkdir $testdir + +blksz=65536 +nr=640 +bufnr=128 +filesize=$((blksz * nr)) +bufsize=$((blksz * bufnr)) + +_require_fs_space $SCRATCH_MNT $((filesize / 1024 * 3 * 5 / 4)) + +echo "Create the original files" +$XFS_IO_PROG -f -c "pwrite -S 0x61 -b $bufsize 0 $filesize" $testdir/file1 >> $seqres.full +_cp_reflink $testdir/file1 $testdir/file2 >> $seqres.full +_dmerror_unmount +_dmerror_mount + +echo "Compare files" +md5sum $testdir/file1 | _filter_scratch +md5sum $testdir/file2 | _filter_scratch + +echo "CoW and unmount" +sync +_dmerror_load_error_table +urk=$($XFS_IO_PROG -f -c "mmap -rw 0 $filesize" -c "mwrite -S 0x63 0 $filesize" -c "msync -s 0 $filesize" $testdir/file2 > $TEST_DIR/mwrite.out 2>&1) +cat $TEST_DIR/mwrite.out | tee -a $seqres.full +_dmerror_load_working_table +_dmerror_unmount +_dmerror_mount + +echo "Compare files" +md5sum $testdir/file1 | _filter_scratch + +echo "Check for damage" +_dmerror_unmount +_dmerror_cleanup +_repair_scratch_fs >> $seqres.full + +# success, all done +status=0 +exit diff --git a/tests/generic/279.out b/tests/generic/279.out new file mode 100644 index 0000000..f34c2b2 --- /dev/null +++ b/tests/generic/279.out @@ -0,0 +1,11 @@ +QA output created by 279 +Format and mount +Create the original files +Compare files +1886e67cf8783e89ce6ddc5bb09a3944 SCRATCH_MNT/test-279/file1 +1886e67cf8783e89ce6ddc5bb09a3944 SCRATCH_MNT/test-279/file2 +CoW and unmount +msync: Input/output error +Compare files +1886e67cf8783e89ce6ddc5bb09a3944 SCRATCH_MNT/test-279/file1 +Check for damage diff --git a/tests/generic/281 b/tests/generic/281 new file mode 100755 index 0000000..71e3dd7 --- /dev/null +++ b/tests/generic/281 @@ -0,0 +1,98 @@ +#! /bin/bash +# FS QA Test No. 281 +# +# Test mmap CoW behavior when the write permanently fails. +# +#----------------------------------------------------------------------- +# Copyright (c) 2016, Oracle and/or its affiliates. All Rights Reserved. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it would be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write the Free Software Foundation, +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +#----------------------------------------------------------------------- + +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 15 + +_cleanup() +{ + cd / + rm -rf $tmp.* $TEST_DIR/mwrite.out + _dmerror_cleanup +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter +. ./common/reflink +. ./common/dmerror + +# real QA test starts here +_supported_os Linux +_require_scratch_reflink +_require_cp_reflink +_need_to_be_root +_require_dm_target error + +rm -f $seqres.full + + +echo "Format and mount" +_scratch_mkfs > $seqres.full 2>&1 +_dmerror_init +_dmerror_mount >> $seqres.full 2>&1 + +testdir=$SCRATCH_MNT/test-$seq +mkdir $testdir + +blksz=65536 +nr=640 +bufnr=128 +filesize=$((blksz * nr)) +bufsize=$((blksz * bufnr)) + +_require_fs_space $SCRATCH_MNT $((filesize / 1024 * 3 * 5 / 4)) + +echo "Create the original files" +$XFS_IO_PROG -f -c "pwrite -S 0x61 -b $bufsize 0 $filesize" $testdir/file1 >> $seqres.full +_cp_reflink $testdir/file1 $testdir/file2 >> $seqres.full +_dmerror_unmount +_dmerror_mount + +echo "Compare files" +md5sum $testdir/file1 | _filter_scratch +md5sum $testdir/file2 | _filter_scratch + +echo "CoW and unmount" +sync +_dmerror_load_error_table +urk=$($XFS_IO_PROG -f -c "mmap -rw 0 $filesize" -c "mwrite -S 0x63 0 $filesize" -c "msync -s 0 $filesize" $testdir/file2 > $TEST_DIR/mwrite.out 2>&1) +cat $TEST_DIR/mwrite.out | tee -a $seqres.full + +echo "Clean up the mess" +_dmerror_unmount +_dmerror_cleanup +_repair_scratch_fs >> $seqres.full +_scratch_mount >> $seqres.full 2>&1 + +echo "Compare files" +md5sum $testdir/file1 | _filter_scratch + +# success, all done +status=0 +exit diff --git a/tests/generic/281.out b/tests/generic/281.out new file mode 100644 index 0000000..a2d8e3f --- /dev/null +++ b/tests/generic/281.out @@ -0,0 +1,11 @@ +QA output created by 281 +Format and mount +Create the original files +Compare files +1886e67cf8783e89ce6ddc5bb09a3944 SCRATCH_MNT/test-281/file1 +1886e67cf8783e89ce6ddc5bb09a3944 SCRATCH_MNT/test-281/file2 +CoW and unmount +msync: Input/output error +Clean up the mess +Compare files +1886e67cf8783e89ce6ddc5bb09a3944 SCRATCH_MNT/test-281/file1 diff --git a/tests/generic/282 b/tests/generic/282 new file mode 100755 index 0000000..38714e0 --- /dev/null +++ b/tests/generic/282 @@ -0,0 +1,101 @@ +#! /bin/bash +# FS QA Test No. 282 +# +# Test mmap CoW behavior when the write temporarily fails and we unmount. +# +#----------------------------------------------------------------------- +# Copyright (c) 2016, Oracle and/or its affiliates. All Rights Reserved. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it would be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write the Free Software Foundation, +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +#----------------------------------------------------------------------- + +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 15 + +_cleanup() +{ + cd / + rm -rf $tmp.* $TEST_DIR/mwrite.out + _dmerror_cleanup +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter +. ./common/reflink +. ./common/dmerror + +# real QA test starts here +_supported_os Linux +_require_scratch_reflink +_require_cp_reflink +_need_to_be_root +_require_dm_target error + +rm -f $seqres.full + + +echo "Format and mount" +_scratch_mkfs > $seqres.full 2>&1 +_dmerror_init +_dmerror_mount >> $seqres.full 2>&1 + +testdir=$SCRATCH_MNT/test-$seq +mkdir $testdir + +blksz=65536 +nr=640 +bufnr=128 +filesize=$((blksz * nr)) +bufsize=$((blksz * bufnr)) + +_require_fs_space $SCRATCH_MNT $((filesize / 1024 * 3 * 5 / 4)) + +echo "Create the original files" +$XFS_IO_PROG -f -c "pwrite -S 0x61 -b $bufsize 0 $filesize" $testdir/file1 >> $seqres.full +_cp_reflink $testdir/file1 $testdir/file2 >> $seqres.full +_dmerror_unmount +_dmerror_mount + +echo "Compare files" +md5sum $testdir/file1 | _filter_scratch +md5sum $testdir/file2 | _filter_scratch + +echo "CoW and unmount" +sync +_dmerror_load_error_table +urk=$($XFS_IO_PROG -f -c "mmap -rw 0 $filesize" -c "mwrite -S 0x63 0 $filesize" $testdir/file2 > $TEST_DIR/mwrite.out 2>&1) +cat $TEST_DIR/mwrite.out | tee -a $seqres.full +_dmerror_load_working_table +rm -rf $testdir/file2 >> $seqres.full 2>&1 +_dmerror_unmount +_dmerror_mount + +echo "Compare files" +md5sum $testdir/file1 | _filter_scratch + +echo "Check for damage" +_dmerror_unmount +_dmerror_cleanup +_repair_scratch_fs >> $seqres.full + +# success, all done +status=0 +exit diff --git a/tests/generic/282.out b/tests/generic/282.out new file mode 100644 index 0000000..624dbfa --- /dev/null +++ b/tests/generic/282.out @@ -0,0 +1,10 @@ +QA output created by 282 +Format and mount +Create the original files +Compare files +1886e67cf8783e89ce6ddc5bb09a3944 SCRATCH_MNT/test-282/file1 +1886e67cf8783e89ce6ddc5bb09a3944 SCRATCH_MNT/test-282/file2 +CoW and unmount +Compare files +1886e67cf8783e89ce6ddc5bb09a3944 SCRATCH_MNT/test-282/file1 +Check for damage diff --git a/tests/generic/283 b/tests/generic/283 new file mode 100755 index 0000000..6d8701f --- /dev/null +++ b/tests/generic/283 @@ -0,0 +1,104 @@ +#! /bin/bash +# FS QA Test No. 283 +# +# Test mmap CoW behavior when the write temporarily fails but the userspace +# program writes again. +# +#----------------------------------------------------------------------- +# Copyright (c) 2016, Oracle and/or its affiliates. All Rights Reserved. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation. +# +# This program is distributed in the hope that it would be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write the Free Software Foundation, +# Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA +#----------------------------------------------------------------------- + +seq=`basename $0` +seqres=$RESULT_DIR/$seq +echo "QA output created by $seq" + +here=`pwd` +tmp=/tmp/$$ +status=1 # failure is the default! +trap "_cleanup; exit \$status" 0 1 2 3 15 + +_cleanup() +{ + cd / + rm -rf $tmp.* $TEST_DIR/mwrite.out + _dmerror_cleanup +} + +# get standard environment, filters and checks +. ./common/rc +. ./common/filter +. ./common/reflink +. ./common/dmerror + +# real QA test starts here +_supported_os Linux +_require_scratch_reflink +_require_cp_reflink +_need_to_be_root +_require_dm_target error + +rm -f $seqres.full + + +echo "Format and mount" +_scratch_mkfs > $seqres.full 2>&1 +_dmerror_init +_dmerror_mount >> $seqres.full 2>&1 + +testdir=$SCRATCH_MNT/test-$seq +mkdir $testdir + +blksz=65536 +nr=640 +bufnr=128 +filesize=$((blksz * nr)) +bufsize=$((blksz * bufnr)) + +_require_fs_space $SCRATCH_MNT $((filesize / 1024 * 3 * 5 / 4)) + +echo "Create the original files" +$XFS_IO_PROG -f -c "pwrite -S 0x61 -b $bufsize 0 $filesize" $testdir/file1 >> $seqres.full +_cp_reflink $testdir/file1 $testdir/file2 >> $seqres.full +_dmerror_unmount +_dmerror_mount + +echo "Compare files" +md5sum $testdir/file1 | _filter_scratch +md5sum $testdir/file2 | _filter_scratch + +echo "CoW and unmount" +sync +_dmerror_load_error_table +urk=$($XFS_IO_PROG -f -c "mmap -rw 0 $filesize" -c "mwrite -S 0x63 0 $filesize" -c "msync -s 0 $filesize" $testdir/file2 > $TEST_DIR/mwrite.out 2>&1) +cat $TEST_DIR/mwrite.out | tee -a $seqres.full +_dmerror_load_working_table + +echo "Rewrite" +$XFS_IO_PROG -f -c "mmap -rw 0 $filesize" -c "mwrite -S 0x63 0 $filesize" -c "msync 0 $filesize" $testdir/file2 >> $seqres.full 2>&1 +_dmerror_unmount +_dmerror_mount + +echo "Compare files" +md5sum $testdir/file1 | _filter_scratch + +echo "Check for damage" +_dmerror_unmount +_dmerror_cleanup +_repair_scratch_fs >> $seqres.full + +# success, all done +status=0 +exit diff --git a/tests/generic/283.out b/tests/generic/283.out new file mode 100644 index 0000000..f9fd5c8 --- /dev/null +++ b/tests/generic/283.out @@ -0,0 +1,12 @@ +QA output created by 283 +Format and mount +Create the original files +Compare files +1886e67cf8783e89ce6ddc5bb09a3944 SCRATCH_MNT/test-283/file1 +1886e67cf8783e89ce6ddc5bb09a3944 SCRATCH_MNT/test-283/file2 +CoW and unmount +msync: Input/output error +Rewrite +Compare files +1886e67cf8783e89ce6ddc5bb09a3944 SCRATCH_MNT/test-283/file1 +Check for damage diff --git a/tests/generic/group b/tests/generic/group index b768882..b4a180e 100644 --- a/tests/generic/group +++ b/tests/generic/group @@ -267,13 +267,25 @@ 262 auto quick clone 263 rw auto quick 264 auto quick clone +265 auto quick clone +266 auto quick clone +267 auto quick clone +268 auto quick clone 269 auto rw prealloc ioctl enospc stress 270 auto quota rw prealloc ioctl enospc stress +271 auto quick clone +272 auto quick clone 273 auto rw 274 auto rw prealloc 275 auto rw enospc +276 auto quick clone 277 auto ioctl quick metadata +278 auto quick clone +279 auto quick clone 280 auto quota freeze dangerous +281 auto quick clone +282 auto quick clone +283 auto quick clone 285 auto rw 286 auto quick other 288 auto quick ioctl trim _______________________________________________ xfs mailing list xfs@oss.sgi.com http://oss.sgi.com/mailman/listinfo/xfs
next prev parent reply other threads:[~2016-02-11 23:41 UTC|newest] Thread overview: 81+ messages / expand[flat|nested] mbox.gz Atom feed top 2016-02-11 23:39 [PATCH v4.2 00/32] xfstests: test the nfs/cifs/btrfs/xfs reflink/dedupe ioctls Darrick J. Wong 2016-02-11 23:39 ` Darrick J. Wong 2016-02-11 23:39 ` [PATCH 01/32] generic/182: this is a dedupe test, check for dedupe Darrick J. Wong 2016-02-11 23:39 ` Darrick J. Wong 2016-02-11 23:39 ` [PATCH 02/32] xfstests: filter whitespace in 128 and 132 Darrick J. Wong 2016-02-11 23:39 ` Darrick J. Wong 2016-02-11 23:39 ` [PATCH 03/32] xfstests: make _scratch_mkfs_blocksized usable Darrick J. Wong 2016-02-11 23:39 ` Darrick J. Wong 2016-02-11 23:39 ` [PATCH 04/32] reflink: remove redundant filesystem checks from the end of the tests Darrick J. Wong 2016-02-11 23:39 ` Darrick J. Wong 2016-02-11 23:39 ` [PATCH 05/32] reflink: remove unnecessary umounts from test code Darrick J. Wong 2016-02-11 23:39 ` Darrick J. Wong 2016-02-11 23:39 ` [PATCH 06/32] common/dmerror: add some more dmerror routines Darrick J. Wong 2016-02-11 23:39 ` Darrick J. Wong 2016-02-11 23:40 ` [PATCH 07/32] common: create _require_test_program to look for programs in src/ Darrick J. Wong 2016-02-11 23:40 ` Darrick J. Wong 2016-02-11 23:40 ` [PATCH 08/32] common: provide a method to repair the scratch fs Darrick J. Wong 2016-02-11 23:40 ` Darrick J. Wong 2016-02-11 23:40 ` [PATCH 09/32] reflink: refactor mixed block creation code Darrick J. Wong 2016-02-11 23:40 ` Darrick J. Wong 2016-02-11 23:40 ` [PATCH 10/32] reflink: fix style problems in existing tests Darrick J. Wong 2016-02-11 23:40 ` [PATCH 11/32] reflink: add _require_odirect to the directio tests Darrick J. Wong 2016-02-11 23:40 ` Darrick J. Wong 2016-02-11 23:40 ` [PATCH 12/32] dio: unwritten conversion bug tests Darrick J. Wong 2016-02-11 23:40 ` Darrick J. Wong 2016-02-12 3:52 ` Dave Chinner 2016-02-12 3:52 ` Dave Chinner 2016-02-12 15:22 ` Theodore Ts'o 2016-02-12 15:22 ` Theodore Ts'o 2016-02-12 22:49 ` Dave Chinner 2016-02-12 22:49 ` Dave Chinner 2016-02-12 17:40 ` Darrick J. Wong 2016-02-12 17:40 ` Darrick J. Wong 2016-02-11 23:40 ` [PATCH 13/32] reflink: test intersecting CoW and falloc/fpunch/fzero/fcollapse/finsert/ftrunc Darrick J. Wong 2016-02-11 23:40 ` Darrick J. Wong 2016-02-11 23:40 ` Darrick J. Wong [this message] 2016-02-11 23:40 ` [PATCH 14/32] reflink: test CoW behavior with IO errors Darrick J. Wong 2016-02-11 23:40 ` [PATCH 15/32] reflink: test CoW operations against the source file Darrick J. Wong 2016-02-11 23:40 ` Darrick J. Wong 2016-02-11 23:41 ` [PATCH 16/32] reflink: ensure that we can handle reflinking a lot of extents Darrick J. Wong 2016-02-11 23:41 ` Darrick J. Wong 2016-02-11 23:41 ` [PATCH 17/32] xfs: more reflink tests Darrick J. Wong 2016-02-11 23:41 ` Darrick J. Wong 2016-02-11 23:41 ` [PATCH 18/32] xfs/122: support refcount/rmap data structures Darrick J. Wong 2016-02-11 23:41 ` Darrick J. Wong 2016-02-11 23:41 ` [PATCH 19/32] xfs: test fragmentation characteristics of copy-on-write Darrick J. Wong 2016-02-11 23:41 ` Darrick J. Wong 2016-02-11 23:41 ` [PATCH 20/32] reflink: high offset reflink and dedupe tests Darrick J. Wong 2016-02-11 23:41 ` Darrick J. Wong 2016-02-11 23:41 ` [PATCH 21/32] reflink: test xfs cow behavior when the filesystem crashes Darrick J. Wong 2016-02-11 23:41 ` Darrick J. Wong 2016-02-11 23:41 ` [PATCH 22/32] reflink: test quota accounting Darrick J. Wong 2016-02-11 23:41 ` Darrick J. Wong 2016-02-11 23:41 ` [PATCH 23/32] reflink: test CoW across a mixed range of block types with cowextsize set Darrick J. Wong 2016-02-11 23:41 ` Darrick J. Wong 2016-02-11 23:42 ` [PATCH 24/32] xfs: test the automatic cowextsize extent garbage collector Darrick J. Wong 2016-02-11 23:42 ` Darrick J. Wong 2016-02-11 23:42 ` [PATCH 25/32] xfs: test rmapbt functionality Darrick J. Wong 2016-02-11 23:42 ` Darrick J. Wong 2016-02-11 23:42 ` [PATCH 26/32] reflink: test aio copy on write Darrick J. Wong 2016-02-11 23:42 ` Darrick J. Wong 2016-02-11 23:42 ` [PATCH 27/32] xfs: aio cow tests Darrick J. Wong 2016-02-11 23:42 ` Darrick J. Wong 2016-02-11 23:42 ` [PATCH 28/32] xfs: test xfs_getbmapx behavior with shared extents Darrick J. Wong 2016-02-11 23:42 ` Darrick J. Wong 2016-02-11 23:42 ` [PATCH 29/32] reflink: test reflink+cow+enospc all at the same time Darrick J. Wong 2016-02-11 23:42 ` Darrick J. Wong 2016-02-11 23:42 ` [PATCH 30/32] xfs: ensure that we don't crash when freeing the ag reservations on a ro mount Darrick J. Wong 2016-02-11 23:42 ` Darrick J. Wong 2016-02-11 23:42 ` [PATCH 31/32] xfs: test source CoW across mixed block types with cowextsz set Darrick J. Wong 2016-02-11 23:42 ` Darrick J. Wong 2016-02-11 23:42 ` [PATCH 32/32] reflink: kick the slow tests out of the 'quick' group Darrick J. Wong 2016-02-11 23:42 ` Darrick J. Wong 2016-02-12 17:41 ` [PATCH 33/32] aiocp: fix the gcc warnings Darrick J. Wong 2016-02-12 17:41 ` Darrick J. Wong 2016-02-13 1:26 ` [PATCH v4.2 00/32] xfstests: test the nfs/cifs/btrfs/xfs reflink/dedupe ioctls Dave Chinner 2016-02-13 1:26 ` Dave Chinner 2016-02-13 4:38 ` Darrick J. Wong 2016-02-13 4:38 ` Darrick J. Wong 2016-02-13 8:03 ` Christoph Hellwig 2016-02-13 8:03 ` Christoph Hellwig
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20160211234050.2202.4569.stgit@birch.djwong.org \ --to=darrick.wong@oracle.com \ --cc=david@fromorbit.com \ --cc=fstests@vger.kernel.org \ --cc=linux-btrfs@vger.kernel.org \ --cc=xfs@oss.sgi.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.