From: Carlo Caione <carlo@caione.org> To: u-boot@lists.denx.de Subject: [U-Boot] [PATCH 0/2] Add support for Amlogic Meson MMC controller Date: Fri, 20 May 2016 21:34:43 +0200 [thread overview] Message-ID: <20160520193443.GA17269@mephisto> (raw) In-Reply-To: <573F5E6B.5010208@gmail.com> On 20/05/16 11:58, Robert Gadsdon wrote: > On 05/20/2016 01:07 AM, Carlo Caione wrote: > > On 20/05/16 08:27, Carlo Caione wrote: > >> On 19/05/16 21:51, Robert Gadsdon wrote: > >>> Applied this on my Odroid C2, and it worked OK when installed on the > >>> SDcard, but failed when installed on the eMMC module: > > > > Oh, reading this again you meant that you put u-boot directly on the > > eMMC? Ok then, something is wrong when using the driver with the eMMC. > > > > Yes, I installed it directly on the eMMC, using the micro-sd adapter, > and following the same instructions as for the SDcard.. Could you try with this patch? diff --git a/board/hardkernel/odroid-c2/odroid-c2.c b/board/hardkernel/odroid-c2/odroid-c2.c index 34b9a95..ab78328 100644 --- a/board/hardkernel/odroid-c2/odroid-c2.c +++ b/board/hardkernel/odroid-c2/odroid-c2.c @@ -80,6 +80,11 @@ U_BOOT_DEVICE(meson_mmc) = { .platdata = &gxbb_sd_platdata[CONFIG_MMC_MESON_SD_PORT], }; +U_BOOT_DEVICE(meson_emmc) = { + .name = "meson_mmc", + .platdata = &gxbb_sd_platdata[2], +}; + static void meson_mmc_pinmux_setup(unsigned int port) { switch (port) { Thanks, -- Carlo Caione
WARNING: multiple messages have this Message-ID (diff)
From: carlo@caione.org (Carlo Caione) To: linus-amlogic@lists.infradead.org Subject: [PATCH 0/2] Add support for Amlogic Meson MMC controller Date: Fri, 20 May 2016 21:34:43 +0200 [thread overview] Message-ID: <20160520193443.GA17269@mephisto> (raw) In-Reply-To: <573F5E6B.5010208@gmail.com> On 20/05/16 11:58, Robert Gadsdon wrote: > On 05/20/2016 01:07 AM, Carlo Caione wrote: > > On 20/05/16 08:27, Carlo Caione wrote: > >> On 19/05/16 21:51, Robert Gadsdon wrote: > >>> Applied this on my Odroid C2, and it worked OK when installed on the > >>> SDcard, but failed when installed on the eMMC module: > > > > Oh, reading this again you meant that you put u-boot directly on the > > eMMC? Ok then, something is wrong when using the driver with the eMMC. > > > > Yes, I installed it directly on the eMMC, using the micro-sd adapter, > and following the same instructions as for the SDcard.. Could you try with this patch? diff --git a/board/hardkernel/odroid-c2/odroid-c2.c b/board/hardkernel/odroid-c2/odroid-c2.c index 34b9a95..ab78328 100644 --- a/board/hardkernel/odroid-c2/odroid-c2.c +++ b/board/hardkernel/odroid-c2/odroid-c2.c @@ -80,6 +80,11 @@ U_BOOT_DEVICE(meson_mmc) = { .platdata = &gxbb_sd_platdata[CONFIG_MMC_MESON_SD_PORT], }; +U_BOOT_DEVICE(meson_emmc) = { + .name = "meson_mmc", + .platdata = &gxbb_sd_platdata[2], +}; + static void meson_mmc_pinmux_setup(unsigned int port) { switch (port) { Thanks, -- Carlo Caione
next prev parent reply other threads:[~2016-05-20 19:34 UTC|newest] Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top 2016-05-12 12:41 [U-Boot] [PATCH 0/2] Add support for Amlogic Meson MMC controller Carlo Caione 2016-05-12 12:41 ` Carlo Caione 2016-05-12 12:41 ` [U-Boot] [PATCH 1/2] mmc: Add Amlogic Meson driver Carlo Caione 2016-05-12 12:41 ` Carlo Caione 2016-05-13 13:46 ` [U-Boot] " Kevin Hilman 2016-05-13 13:46 ` Kevin Hilman 2016-05-13 13:53 ` [U-Boot] " Carlo Caione 2016-05-13 13:53 ` Carlo Caione 2016-05-13 16:07 ` [U-Boot] " Kevin Hilman 2016-05-13 16:07 ` Kevin Hilman 2016-08-07 15:49 ` [U-Boot] " Andreas Färber 2016-08-07 15:49 ` Andreas Färber 2016-08-04 6:48 ` [U-Boot] [U-Boot,1/2] " Jaehoon Chung 2016-08-04 6:48 ` Jaehoon Chung 2016-05-12 12:41 ` [U-Boot] [PATCH 2/2] arm: amlogic: Enable MMC driver on Odroid-C2 Carlo Caione 2016-05-12 12:41 ` Carlo Caione 2016-05-20 4:51 ` [U-Boot] [PATCH 0/2] Add support for Amlogic Meson MMC controller Robert Gadsdon 2016-05-20 4:51 ` Robert Gadsdon 2016-05-20 6:27 ` [U-Boot] " Carlo Caione 2016-05-20 6:27 ` Carlo Caione 2016-05-20 8:07 ` [U-Boot] " Carlo Caione 2016-05-20 8:07 ` Carlo Caione 2016-05-20 18:58 ` [U-Boot] " Robert Gadsdon 2016-05-20 18:58 ` Robert Gadsdon 2016-05-20 19:34 ` Carlo Caione [this message] 2016-05-20 19:34 ` Carlo Caione 2016-05-21 2:28 ` [U-Boot] " Robert Gadsdon 2016-05-21 2:28 ` Robert Gadsdon
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20160520193443.GA17269@mephisto \ --to=carlo@caione.org \ --cc=u-boot@lists.denx.de \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.