From: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> To: <ath10k@lists.infradead.org> Cc: <linux-wireless@vger.kernel.org>, <rmanohar@codeaurora.org>, "Rajkumar Manoharan" <rmanohar@qti.qualcomm.com> Subject: [PATCH 4/5] ath10k: add new ATH10K_FW_FEATURE_BTCOEX_PARAM Date: Fri, 27 May 2016 20:15:58 +0530 [thread overview] Message-ID: <20160527144559.4053-4-rmanohar@qti.qualcomm.com> (raw) In-Reply-To: <20160527144559.4053-1-rmanohar@qti.qualcomm.com> This feature flag will be used for firmware to support BT-Coex feature without reloading firmware via WMI pdev param. To support Bluetooth coexistence pdev param, WMI_COEX_GPIO_SUPPORT of extended resource config should be enabled always. This firmware IE is used to configure WMI_COEX_GPIO_SUPPORT. Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> --- drivers/net/wireless/ath/ath10k/core.c | 1 + drivers/net/wireless/ath/ath10k/core.h | 7 +++++++ 2 files changed, 8 insertions(+) diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c index 21b8c8c2a08e..88b51225a52a 100644 --- a/drivers/net/wireless/ath/ath10k/core.c +++ b/drivers/net/wireless/ath/ath10k/core.c @@ -258,6 +258,7 @@ static const char *const ath10k_core_fw_feature_str[] = { [ATH10K_FW_FEATURE_SUPPORTS_ADAPTIVE_CCA] = "adaptive-cca", [ATH10K_FW_FEATURE_MFP_SUPPORT] = "mfp", [ATH10K_FW_FEATURE_PEER_FLOW_CONTROL] = "peer-flow-ctrl", + [ATH10K_FW_FEATURE_BTCOEX_PARAM] = "btcoex-param", }; static unsigned int ath10k_core_get_fw_feature_str(char *buf, diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h index 1852e0ee3fa1..4462c3f81c05 100644 --- a/drivers/net/wireless/ath/ath10k/core.h +++ b/drivers/net/wireless/ath/ath10k/core.h @@ -535,6 +535,13 @@ enum ath10k_fw_features { */ ATH10K_FW_FEATURE_PEER_FLOW_CONTROL = 13, + /* Firmware supports BT-Coex without reloading firmware via pdev param. + * To support Bluetooth coexistence pdev param, WMI_COEX_GPIO_SUPPORT of + * extended resource config should be enabled always. This firmware IE + * is used to configure WMI_COEX_GPIO_SUPPORT. + */ + ATH10K_FW_FEATURE_BTCOEX_PARAM = 14, + /* keep last */ ATH10K_FW_FEATURE_COUNT, }; -- 2.8.3
WARNING: multiple messages have this Message-ID (diff)
From: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> To: ath10k@lists.infradead.org Cc: linux-wireless@vger.kernel.org, Rajkumar Manoharan <rmanohar@qti.qualcomm.com>, rmanohar@codeaurora.org Subject: [PATCH 4/5] ath10k: add new ATH10K_FW_FEATURE_BTCOEX_PARAM Date: Fri, 27 May 2016 20:15:58 +0530 [thread overview] Message-ID: <20160527144559.4053-4-rmanohar@qti.qualcomm.com> (raw) In-Reply-To: <20160527144559.4053-1-rmanohar@qti.qualcomm.com> This feature flag will be used for firmware to support BT-Coex feature without reloading firmware via WMI pdev param. To support Bluetooth coexistence pdev param, WMI_COEX_GPIO_SUPPORT of extended resource config should be enabled always. This firmware IE is used to configure WMI_COEX_GPIO_SUPPORT. Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> --- drivers/net/wireless/ath/ath10k/core.c | 1 + drivers/net/wireless/ath/ath10k/core.h | 7 +++++++ 2 files changed, 8 insertions(+) diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c index 21b8c8c2a08e..88b51225a52a 100644 --- a/drivers/net/wireless/ath/ath10k/core.c +++ b/drivers/net/wireless/ath/ath10k/core.c @@ -258,6 +258,7 @@ static const char *const ath10k_core_fw_feature_str[] = { [ATH10K_FW_FEATURE_SUPPORTS_ADAPTIVE_CCA] = "adaptive-cca", [ATH10K_FW_FEATURE_MFP_SUPPORT] = "mfp", [ATH10K_FW_FEATURE_PEER_FLOW_CONTROL] = "peer-flow-ctrl", + [ATH10K_FW_FEATURE_BTCOEX_PARAM] = "btcoex-param", }; static unsigned int ath10k_core_get_fw_feature_str(char *buf, diff --git a/drivers/net/wireless/ath/ath10k/core.h b/drivers/net/wireless/ath/ath10k/core.h index 1852e0ee3fa1..4462c3f81c05 100644 --- a/drivers/net/wireless/ath/ath10k/core.h +++ b/drivers/net/wireless/ath/ath10k/core.h @@ -535,6 +535,13 @@ enum ath10k_fw_features { */ ATH10K_FW_FEATURE_PEER_FLOW_CONTROL = 13, + /* Firmware supports BT-Coex without reloading firmware via pdev param. + * To support Bluetooth coexistence pdev param, WMI_COEX_GPIO_SUPPORT of + * extended resource config should be enabled always. This firmware IE + * is used to configure WMI_COEX_GPIO_SUPPORT. + */ + ATH10K_FW_FEATURE_BTCOEX_PARAM = 14, + /* keep last */ ATH10K_FW_FEATURE_COUNT, }; -- 2.8.3 _______________________________________________ ath10k mailing list ath10k@lists.infradead.org http://lists.infradead.org/mailman/listinfo/ath10k
next prev parent reply other threads:[~2016-05-27 14:47 UTC|newest] Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top 2016-05-27 14:45 [PATCH 1/5] ath10k: fix operating irq mode for ahb device Rajkumar Manoharan 2016-05-27 14:45 ` Rajkumar Manoharan 2016-05-27 14:45 ` [PATCH 2/5] ath10k: remove unused phy_mode_to_band Rajkumar Manoharan 2016-05-27 14:45 ` Rajkumar Manoharan 2016-05-27 14:45 ` [PATCH 3/5] ath10k: update module description Rajkumar Manoharan 2016-05-27 14:45 ` Rajkumar Manoharan 2016-05-27 14:45 ` Rajkumar Manoharan [this message] 2016-05-27 14:45 ` [PATCH 4/5] ath10k: add new ATH10K_FW_FEATURE_BTCOEX_PARAM Rajkumar Manoharan 2016-05-27 14:45 ` [PATCH 5/5] ath10k: add pdev param support to enable/disable btcoex Rajkumar Manoharan 2016-05-27 14:45 ` Rajkumar Manoharan 2016-06-02 14:56 ` [1/5] ath10k: fix operating irq mode for ahb device Kalle Valo 2016-06-02 14:56 ` Kalle Valo
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20160527144559.4053-4-rmanohar@qti.qualcomm.com \ --to=rmanohar@qti.qualcomm.com \ --cc=ath10k@lists.infradead.org \ --cc=linux-wireless@vger.kernel.org \ --cc=rmanohar@codeaurora.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.