From: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> To: <ath10k@lists.infradead.org> Cc: <linux-wireless@vger.kernel.org>, <rmanohar@codeaurora.org>, "Rajkumar Manoharan" <rmanohar@qti.qualcomm.com> Subject: [PATCH 1/2] ath10k: handle testmode events for 10.2 based firmware Date: Fri, 3 Jun 2016 21:03:27 +0530 [thread overview] Message-ID: <20160603153328.11947-1-rmanohar@qti.qualcomm.com> (raw) Currently testmode events for 10.x firmware are processed from 10.1 wmi event processing. In order to remove 10.1 firmware support, testmode events should be handled from 10.2 event processing. Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> --- drivers/net/wireless/ath/ath10k/wmi.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c index 6279ab4a760e..b7fb0d76c433 100644 --- a/drivers/net/wireless/ath/ath10k/wmi.c +++ b/drivers/net/wireless/ath/ath10k/wmi.c @@ -5095,6 +5095,7 @@ static void ath10k_wmi_10_2_op_rx(struct ath10k *ar, struct sk_buff *skb) { struct wmi_cmd_hdr *cmd_hdr; enum wmi_10_2_event_id id; + bool consumed; cmd_hdr = (struct wmi_cmd_hdr *)skb->data; id = MS(__le32_to_cpu(cmd_hdr->cmd_id), WMI_CMD_HDR_CMD_ID); @@ -5104,6 +5105,17 @@ static void ath10k_wmi_10_2_op_rx(struct ath10k *ar, struct sk_buff *skb) trace_ath10k_wmi_event(ar, id, skb->data, skb->len); + consumed = ath10k_tm_event_wmi(ar, id, skb); + /* Ready event must be handled normally also in UTF mode so that we + * know the UTF firmware has booted, others we are just bypass WMI + * events to testmode. + */ + if (consumed && id != WMI_10_2_READY_EVENTID) { + ath10k_dbg(ar, ATH10K_DBG_WMI, + "wmi testmode consumed 0x%x\n", id); + goto out; + } + switch (id) { case WMI_10_2_MGMT_RX_EVENTID: ath10k_wmi_event_mgmt_rx(ar, skb); -- 2.8.3
WARNING: multiple messages have this Message-ID (diff)
From: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> To: ath10k@lists.infradead.org Cc: linux-wireless@vger.kernel.org, Rajkumar Manoharan <rmanohar@qti.qualcomm.com>, rmanohar@codeaurora.org Subject: [PATCH 1/2] ath10k: handle testmode events for 10.2 based firmware Date: Fri, 3 Jun 2016 21:03:27 +0530 [thread overview] Message-ID: <20160603153328.11947-1-rmanohar@qti.qualcomm.com> (raw) Currently testmode events for 10.x firmware are processed from 10.1 wmi event processing. In order to remove 10.1 firmware support, testmode events should be handled from 10.2 event processing. Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com> --- drivers/net/wireless/ath/ath10k/wmi.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/drivers/net/wireless/ath/ath10k/wmi.c b/drivers/net/wireless/ath/ath10k/wmi.c index 6279ab4a760e..b7fb0d76c433 100644 --- a/drivers/net/wireless/ath/ath10k/wmi.c +++ b/drivers/net/wireless/ath/ath10k/wmi.c @@ -5095,6 +5095,7 @@ static void ath10k_wmi_10_2_op_rx(struct ath10k *ar, struct sk_buff *skb) { struct wmi_cmd_hdr *cmd_hdr; enum wmi_10_2_event_id id; + bool consumed; cmd_hdr = (struct wmi_cmd_hdr *)skb->data; id = MS(__le32_to_cpu(cmd_hdr->cmd_id), WMI_CMD_HDR_CMD_ID); @@ -5104,6 +5105,17 @@ static void ath10k_wmi_10_2_op_rx(struct ath10k *ar, struct sk_buff *skb) trace_ath10k_wmi_event(ar, id, skb->data, skb->len); + consumed = ath10k_tm_event_wmi(ar, id, skb); + /* Ready event must be handled normally also in UTF mode so that we + * know the UTF firmware has booted, others we are just bypass WMI + * events to testmode. + */ + if (consumed && id != WMI_10_2_READY_EVENTID) { + ath10k_dbg(ar, ATH10K_DBG_WMI, + "wmi testmode consumed 0x%x\n", id); + goto out; + } + switch (id) { case WMI_10_2_MGMT_RX_EVENTID: ath10k_wmi_event_mgmt_rx(ar, skb); -- 2.8.3 _______________________________________________ ath10k mailing list ath10k@lists.infradead.org http://lists.infradead.org/mailman/listinfo/ath10k
next reply other threads:[~2016-06-03 15:33 UTC|newest] Thread overview: 24+ messages / expand[flat|nested] mbox.gz Atom feed top 2016-06-03 15:33 Rajkumar Manoharan [this message] 2016-06-03 15:33 ` [PATCH 1/2] ath10k: handle testmode events for 10.2 based firmware Rajkumar Manoharan 2016-06-03 15:33 ` [PATCH 2/2] ath10k: remove 10.1 firmware support Rajkumar Manoharan 2016-06-03 15:33 ` Rajkumar Manoharan 2016-06-03 15:48 ` Ben Greear 2016-06-03 15:48 ` Ben Greear 2016-06-03 15:55 ` Rajkumar Manoharan 2016-06-03 15:55 ` Rajkumar Manoharan 2016-06-03 16:07 ` Ben Greear 2016-06-03 16:07 ` Ben Greear 2016-06-03 16:28 ` Rajkumar Manoharan 2016-06-03 16:28 ` Rajkumar Manoharan 2016-06-03 16:36 ` Ben Greear 2016-06-03 16:36 ` Ben Greear 2016-06-03 16:09 ` Valo, Kalle 2016-06-03 16:09 ` Valo, Kalle 2016-06-03 16:20 ` Ben Greear 2016-06-03 16:20 ` Ben Greear 2016-06-03 16:33 ` Valo, Kalle 2016-06-03 16:33 ` Valo, Kalle 2016-06-03 16:46 ` Ben Greear 2016-06-03 16:46 ` Ben Greear 2016-09-14 12:24 ` [1/2] ath10k: handle testmode events for 10.2 based firmware Kalle Valo 2016-09-14 12:24 ` Kalle Valo
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20160603153328.11947-1-rmanohar@qti.qualcomm.com \ --to=rmanohar@qti.qualcomm.com \ --cc=ath10k@lists.infradead.org \ --cc=linux-wireless@vger.kernel.org \ --cc=rmanohar@codeaurora.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.