All of lore.kernel.org
 help / color / mirror / Atom feed
From: Bhaktipriya Shridhar <bhaktipriya96@gmail.com>
To: Mark Brown <broonie@kernel.org>
Cc: Tejun Heo <tj@kernel.org>,
	linux-spi@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH] spi: spi-bfin-sport: Remove deprecated create_singlethread_workqueue
Date: Sat, 2 Jul 2016 14:29:41 +0530	[thread overview]
Message-ID: <20160702085941.GA28900@Karyakshetra> (raw)

The workqueue "workqueue" serves as a driver message queue.
It has a single work item(&drv_data->pump_messages) and hence doesn't
require ordering. Also, it is not being used on a memory reclaim path.
Hence, the singlethreaded workqueue has been replaced with the use of
system_wq.

System workqueues have been able to handle high level of concurrency
for a long time now and hence it's not required to have a singlethreaded
workqueue just to gain concurrency. Unlike a dedicated per-cpu workqueue
created with create_singlethread_workqueue(), system_wq allows multiple
work items to overlap executions even on the same CPU; however, a
per-cpu workqueue doesn't have any CPU locality or global ordering
guarantee unless the target CPU is explicitly specified and thus the
increase of local concurrency shouldn't make any difference.

Work item has been flushed in bfin_sport_spi_destroy_queue() to ensure
that there are no pending tasks while disconnecting the driver.

Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96@gmail.com>
---
 drivers/spi/spi-bfin-sport.c | 15 ++++-----------
 1 file changed, 4 insertions(+), 11 deletions(-)

diff --git a/drivers/spi/spi-bfin-sport.c b/drivers/spi/spi-bfin-sport.c
index 6c96755..01d0ba9 100644
--- a/drivers/spi/spi-bfin-sport.c
+++ b/drivers/spi/spi-bfin-sport.c
@@ -64,8 +64,6 @@ struct bfin_sport_spi_master_data {
 	/* Pin request list */
 	u16 *pin_req;

-	/* Driver message queue */
-	struct workqueue_struct *workqueue;
 	struct work_struct pump_messages;
 	spinlock_t lock;
 	struct list_head queue;
@@ -300,7 +298,7 @@ bfin_sport_spi_giveback(struct bfin_sport_spi_master_data *drv_data)
 	drv_data->cur_msg = NULL;
 	drv_data->cur_transfer = NULL;
 	drv_data->cur_chip = NULL;
-	queue_work(drv_data->workqueue, &drv_data->pump_messages);
+	schedule_work(&drv_data->pump_messages);
 	spin_unlock_irqrestore(&drv_data->lock, flags);

 	if (!drv_data->cs_change)
@@ -556,7 +554,7 @@ bfin_sport_spi_transfer(struct spi_device *spi, struct spi_message *msg)
 	list_add_tail(&msg->queue, &drv_data->queue);

 	if (drv_data->run && !drv_data->busy)
-		queue_work(drv_data->workqueue, &drv_data->pump_messages);
+		schedule_work(&drv_data->pump_messages);

 	spin_unlock_irqrestore(&drv_data->lock, flags);

@@ -666,12 +664,7 @@ bfin_sport_spi_init_queue(struct bfin_sport_spi_master_data *drv_data)
 	tasklet_init(&drv_data->pump_transfers,
 		     bfin_sport_spi_pump_transfers, (unsigned long)drv_data);

-	/* init messages workqueue */
 	INIT_WORK(&drv_data->pump_messages, bfin_sport_spi_pump_messages);
-	drv_data->workqueue =
-	    create_singlethread_workqueue(dev_name(drv_data->master->dev.parent));
-	if (drv_data->workqueue == NULL)
-		return -EBUSY;

 	return 0;
 }
@@ -694,7 +687,7 @@ bfin_sport_spi_start_queue(struct bfin_sport_spi_master_data *drv_data)
 	drv_data->cur_chip = NULL;
 	spin_unlock_irqrestore(&drv_data->lock, flags);

-	queue_work(drv_data->workqueue, &drv_data->pump_messages);
+	schedule_work(&drv_data->pump_messages);

 	return 0;
 }
@@ -738,7 +731,7 @@ bfin_sport_spi_destroy_queue(struct bfin_sport_spi_master_data *drv_data)
 	if (status)
 		return status;

-	destroy_workqueue(drv_data->workqueue);
+	flush_work(&drv_data->pump_messages);

 	return 0;
 }
--
2.1.4

WARNING: multiple messages have this Message-ID (diff)
From: Bhaktipriya Shridhar <bhaktipriya96-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
To: Mark Brown <broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Cc: Tejun Heo <tj-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
	linux-spi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: [PATCH] spi: spi-bfin-sport: Remove deprecated create_singlethread_workqueue
Date: Sat, 2 Jul 2016 14:29:41 +0530	[thread overview]
Message-ID: <20160702085941.GA28900@Karyakshetra> (raw)

The workqueue "workqueue" serves as a driver message queue.
It has a single work item(&drv_data->pump_messages) and hence doesn't
require ordering. Also, it is not being used on a memory reclaim path.
Hence, the singlethreaded workqueue has been replaced with the use of
system_wq.

System workqueues have been able to handle high level of concurrency
for a long time now and hence it's not required to have a singlethreaded
workqueue just to gain concurrency. Unlike a dedicated per-cpu workqueue
created with create_singlethread_workqueue(), system_wq allows multiple
work items to overlap executions even on the same CPU; however, a
per-cpu workqueue doesn't have any CPU locality or global ordering
guarantee unless the target CPU is explicitly specified and thus the
increase of local concurrency shouldn't make any difference.

Work item has been flushed in bfin_sport_spi_destroy_queue() to ensure
that there are no pending tasks while disconnecting the driver.

Signed-off-by: Bhaktipriya Shridhar <bhaktipriya96-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
---
 drivers/spi/spi-bfin-sport.c | 15 ++++-----------
 1 file changed, 4 insertions(+), 11 deletions(-)

diff --git a/drivers/spi/spi-bfin-sport.c b/drivers/spi/spi-bfin-sport.c
index 6c96755..01d0ba9 100644
--- a/drivers/spi/spi-bfin-sport.c
+++ b/drivers/spi/spi-bfin-sport.c
@@ -64,8 +64,6 @@ struct bfin_sport_spi_master_data {
 	/* Pin request list */
 	u16 *pin_req;

-	/* Driver message queue */
-	struct workqueue_struct *workqueue;
 	struct work_struct pump_messages;
 	spinlock_t lock;
 	struct list_head queue;
@@ -300,7 +298,7 @@ bfin_sport_spi_giveback(struct bfin_sport_spi_master_data *drv_data)
 	drv_data->cur_msg = NULL;
 	drv_data->cur_transfer = NULL;
 	drv_data->cur_chip = NULL;
-	queue_work(drv_data->workqueue, &drv_data->pump_messages);
+	schedule_work(&drv_data->pump_messages);
 	spin_unlock_irqrestore(&drv_data->lock, flags);

 	if (!drv_data->cs_change)
@@ -556,7 +554,7 @@ bfin_sport_spi_transfer(struct spi_device *spi, struct spi_message *msg)
 	list_add_tail(&msg->queue, &drv_data->queue);

 	if (drv_data->run && !drv_data->busy)
-		queue_work(drv_data->workqueue, &drv_data->pump_messages);
+		schedule_work(&drv_data->pump_messages);

 	spin_unlock_irqrestore(&drv_data->lock, flags);

@@ -666,12 +664,7 @@ bfin_sport_spi_init_queue(struct bfin_sport_spi_master_data *drv_data)
 	tasklet_init(&drv_data->pump_transfers,
 		     bfin_sport_spi_pump_transfers, (unsigned long)drv_data);

-	/* init messages workqueue */
 	INIT_WORK(&drv_data->pump_messages, bfin_sport_spi_pump_messages);
-	drv_data->workqueue =
-	    create_singlethread_workqueue(dev_name(drv_data->master->dev.parent));
-	if (drv_data->workqueue == NULL)
-		return -EBUSY;

 	return 0;
 }
@@ -694,7 +687,7 @@ bfin_sport_spi_start_queue(struct bfin_sport_spi_master_data *drv_data)
 	drv_data->cur_chip = NULL;
 	spin_unlock_irqrestore(&drv_data->lock, flags);

-	queue_work(drv_data->workqueue, &drv_data->pump_messages);
+	schedule_work(&drv_data->pump_messages);

 	return 0;
 }
@@ -738,7 +731,7 @@ bfin_sport_spi_destroy_queue(struct bfin_sport_spi_master_data *drv_data)
 	if (status)
 		return status;

-	destroy_workqueue(drv_data->workqueue);
+	flush_work(&drv_data->pump_messages);

 	return 0;
 }
--
2.1.4

--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

             reply	other threads:[~2016-07-02  8:59 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-07-02  8:59 Bhaktipriya Shridhar [this message]
2016-07-02  8:59 ` [PATCH] spi: spi-bfin-sport: Remove deprecated create_singlethread_workqueue Bhaktipriya Shridhar
2016-07-02 11:44 ` Tejun Heo
2016-07-02 11:44   ` Tejun Heo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20160702085941.GA28900@Karyakshetra \
    --to=bhaktipriya96@gmail.com \
    --cc=broonie@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-spi@vger.kernel.org \
    --cc=tj@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.