All of lore.kernel.org
 help / color / mirror / Atom feed
From: Baole Ni <baolex.ni@intel.com>
To: kvalo@qca.qualcomm.com, linux-wimax@intel.com,
	bkenward@solarflare.com, linux-driver@qlogic.com,
	computersforpeace@gmail.com, m.chehab@samsung.com,
	pawel@osciak.com, m.szyprowski@samsung.com,
	kyungmin.park@samsung.com, k.kozlowski@samsung.com
Cc: ath10k@lists.infradead.org, linux-wireless@vger.kernel.org,
	netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
	chuansheng.liu@intel.com, baolex.ni@intel.com,
	daniel@iogearbox.net, pabeni@redhat.com
Subject: [PATCH 0764/1285] Replace numeric parameter like 0444 with macro
Date: Tue,  2 Aug 2016 19:44:02 +0800	[thread overview]
Message-ID: <20160802114402.595-1-baolex.ni@intel.com> (raw)

I find that the developers often just specified the numeric value
when calling a macro which is defined with a parameter for access permission.
As we know, these numeric value for access permission have had the corresponding macro,
and that using macro can improve the robustness and readability of the code,
thus, I suggest replacing the numeric parameter with the macro.

Signed-off-by: Chuansheng Liu <chuansheng.liu@intel.com>
Signed-off-by: Baole Ni <baolex.ni@intel.com>
---
 drivers/net/wireless/ath/ath10k/pci.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c
index 8133d7b..0961a4e 100644
--- a/drivers/net/wireless/ath/ath10k/pci.c
+++ b/drivers/net/wireless/ath/ath10k/pci.c
@@ -41,10 +41,10 @@ enum ath10k_pci_reset_mode {
 static unsigned int ath10k_pci_irq_mode = ATH10K_PCI_IRQ_AUTO;
 static unsigned int ath10k_pci_reset_mode = ATH10K_PCI_RESET_AUTO;
 
-module_param_named(irq_mode, ath10k_pci_irq_mode, uint, 0644);
+module_param_named(irq_mode, ath10k_pci_irq_mode, uint, S_IRUSR | S_IWUSR | S_IRGRP | S_IROTH);
 MODULE_PARM_DESC(irq_mode, "0: auto, 1: legacy, 2: msi (default: 0)");
 
-module_param_named(reset_mode, ath10k_pci_reset_mode, uint, 0644);
+module_param_named(reset_mode, ath10k_pci_reset_mode, uint, S_IRUSR | S_IWUSR | S_IRGRP | S_IROTH);
 MODULE_PARM_DESC(reset_mode, "0: auto, 1: warm only (default: 0)");
 
 /* how long wait to wait for target to initialise, in ms */
-- 
2.9.2


WARNING: multiple messages have this Message-ID (diff)
From: Baole Ni <baolex.ni@intel.com>
To: kvalo@qca.qualcomm.com, linux-wimax@intel.com,
	bkenward@solarflare.com, linux-driver@qlogic.com,
	computersforpeace@gmail.com, m.chehab@samsung.com,
	pawel@osciak.com, m.szyprowski@samsung.com,
	kyungmin.park@samsung.com, k.kozlowski@samsung.com
Cc: pabeni@redhat.com, daniel@iogearbox.net, netdev@vger.kernel.org,
	linux-wireless@vger.kernel.org, linux-kernel@vger.kernel.org,
	ath10k@lists.infradead.org, baolex.ni@intel.com,
	chuansheng.liu@intel.com
Subject: [PATCH 0764/1285] Replace numeric parameter like 0444 with macro
Date: Tue,  2 Aug 2016 19:44:02 +0800	[thread overview]
Message-ID: <20160802114402.595-1-baolex.ni@intel.com> (raw)

I find that the developers often just specified the numeric value
when calling a macro which is defined with a parameter for access permission.
As we know, these numeric value for access permission have had the corresponding macro,
and that using macro can improve the robustness and readability of the code,
thus, I suggest replacing the numeric parameter with the macro.

Signed-off-by: Chuansheng Liu <chuansheng.liu@intel.com>
Signed-off-by: Baole Ni <baolex.ni@intel.com>
---
 drivers/net/wireless/ath/ath10k/pci.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c
index 8133d7b..0961a4e 100644
--- a/drivers/net/wireless/ath/ath10k/pci.c
+++ b/drivers/net/wireless/ath/ath10k/pci.c
@@ -41,10 +41,10 @@ enum ath10k_pci_reset_mode {
 static unsigned int ath10k_pci_irq_mode = ATH10K_PCI_IRQ_AUTO;
 static unsigned int ath10k_pci_reset_mode = ATH10K_PCI_RESET_AUTO;
 
-module_param_named(irq_mode, ath10k_pci_irq_mode, uint, 0644);
+module_param_named(irq_mode, ath10k_pci_irq_mode, uint, S_IRUSR | S_IWUSR | S_IRGRP | S_IROTH);
 MODULE_PARM_DESC(irq_mode, "0: auto, 1: legacy, 2: msi (default: 0)");
 
-module_param_named(reset_mode, ath10k_pci_reset_mode, uint, 0644);
+module_param_named(reset_mode, ath10k_pci_reset_mode, uint, S_IRUSR | S_IWUSR | S_IRGRP | S_IROTH);
 MODULE_PARM_DESC(reset_mode, "0: auto, 1: warm only (default: 0)");
 
 /* how long wait to wait for target to initialise, in ms */
-- 
2.9.2

WARNING: multiple messages have this Message-ID (diff)
From: Baole Ni <baolex.ni@intel.com>
To: kvalo@qca.qualcomm.com, linux-wimax@intel.com,
	bkenward@solarflare.com, linux-driver@qlogic.com,
	computersforpeace@gmail.com, m.chehab@samsung.com,
	pawel@osciak.com, m.szyprowski@samsung.com,
	kyungmin.park@samsung.com, k.kozlowski@samsung.com
Cc: pabeni@redhat.com, daniel@iogearbox.net, netdev@vger.kernel.org,
	linux-wireless@vger.kernel.org, linux-kernel@vger.kernel.org,
	ath10k@lists.infradead.org, baolex.ni@intel.com,
	chuansheng.liu@intel.com
Subject: [PATCH 0764/1285] Replace numeric parameter like 0444 with macro
Date: Tue,  2 Aug 2016 19:44:02 +0800	[thread overview]
Message-ID: <20160802114402.595-1-baolex.ni@intel.com> (raw)

I find that the developers often just specified the numeric value
when calling a macro which is defined with a parameter for access permission.
As we know, these numeric value for access permission have had the corresponding macro,
and that using macro can improve the robustness and readability of the code,
thus, I suggest replacing the numeric parameter with the macro.

Signed-off-by: Chuansheng Liu <chuansheng.liu@intel.com>
Signed-off-by: Baole Ni <baolex.ni@intel.com>
---
 drivers/net/wireless/ath/ath10k/pci.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c
index 8133d7b..0961a4e 100644
--- a/drivers/net/wireless/ath/ath10k/pci.c
+++ b/drivers/net/wireless/ath/ath10k/pci.c
@@ -41,10 +41,10 @@ enum ath10k_pci_reset_mode {
 static unsigned int ath10k_pci_irq_mode = ATH10K_PCI_IRQ_AUTO;
 static unsigned int ath10k_pci_reset_mode = ATH10K_PCI_RESET_AUTO;
 
-module_param_named(irq_mode, ath10k_pci_irq_mode, uint, 0644);
+module_param_named(irq_mode, ath10k_pci_irq_mode, uint, S_IRUSR | S_IWUSR | S_IRGRP | S_IROTH);
 MODULE_PARM_DESC(irq_mode, "0: auto, 1: legacy, 2: msi (default: 0)");
 
-module_param_named(reset_mode, ath10k_pci_reset_mode, uint, 0644);
+module_param_named(reset_mode, ath10k_pci_reset_mode, uint, S_IRUSR | S_IWUSR | S_IRGRP | S_IROTH);
 MODULE_PARM_DESC(reset_mode, "0: auto, 1: warm only (default: 0)");
 
 /* how long wait to wait for target to initialise, in ms */
-- 
2.9.2


_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

             reply	other threads:[~2016-08-02 12:22 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-08-02 11:44 Baole Ni [this message]
2016-08-02 11:44 ` [PATCH 0764/1285] Replace numeric parameter like 0444 with macro Baole Ni
2016-08-02 11:44 ` Baole Ni

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20160802114402.595-1-baolex.ni@intel.com \
    --to=baolex.ni@intel.com \
    --cc=ath10k@lists.infradead.org \
    --cc=bkenward@solarflare.com \
    --cc=chuansheng.liu@intel.com \
    --cc=computersforpeace@gmail.com \
    --cc=daniel@iogearbox.net \
    --cc=k.kozlowski@samsung.com \
    --cc=kvalo@qca.qualcomm.com \
    --cc=kyungmin.park@samsung.com \
    --cc=linux-driver@qlogic.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-wimax@intel.com \
    --cc=linux-wireless@vger.kernel.org \
    --cc=m.chehab@samsung.com \
    --cc=m.szyprowski@samsung.com \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    --cc=pawel@osciak.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.