All of lore.kernel.org
 help / color / mirror / Atom feed
From: Vignesh R <vigneshr@ti.com>
To: Mark Brown <broonie@kernel.org>
Cc: <linux-spi@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	<linux-omap@vger.kernel.org>, Vignesh R <vigneshr@ti.com>
Subject: [PATCH v6 1/2] spi: Add support to handle kmap'd buffers in spi_map_buf()
Date: Wed, 17 Aug 2016 15:22:36 +0530	[thread overview]
Message-ID: <20160817095237.13101-2-vigneshr@ti.com> (raw)
In-Reply-To: <20160817095237.13101-1-vigneshr@ti.com>

JFFS2 FS might sometime provide kmap'd buffers as destination
buffers to read data from flash. Update spi_map_buf() function to
generate sg_list for such buffers, so that SPI controllers drivers can
use DMA to read data into such buffers.

Signed-off-by: Vignesh R <vigneshr@ti.com>
---

v6: New patch. Extends spi_map_buf() to handle kmap buffers

 drivers/spi/spi.c | 17 ++++++++++++++---
 1 file changed, 14 insertions(+), 3 deletions(-)

diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index b4f6951256b1..a58e102326a1 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -37,6 +37,7 @@
 #include <linux/kthread.h>
 #include <linux/ioport.h>
 #include <linux/acpi.h>
+#include <linux/highmem.h>
 
 #define CREATE_TRACE_POINTS
 #include <trace/events/spi.h>
@@ -709,6 +710,13 @@ static int spi_map_buf(struct spi_master *master, struct device *dev,
 {
 	const bool vmalloced_buf = is_vmalloc_addr(buf);
 	unsigned int max_seg_size = dma_get_max_seg_size(dev);
+#ifdef CONFIG_HIGHMEM
+	const bool kmap_buf = ((unsigned long)buf >= PKMAP_BASE &&
+				(unsigned long)buf < (PKMAP_BASE +
+					(LAST_PKMAP * PAGE_SIZE)));
+#else
+	const bool kmap_buf = false;
+#endif
 	int desc_len;
 	int sgs;
 	struct page *vm_page;
@@ -716,7 +724,7 @@ static int spi_map_buf(struct spi_master *master, struct device *dev,
 	size_t min;
 	int i, ret;
 
-	if (vmalloced_buf) {
+	if (vmalloced_buf || kmap_buf) {
 		desc_len = min_t(int, max_seg_size, PAGE_SIZE);
 		sgs = DIV_ROUND_UP(len + offset_in_page(buf), desc_len);
 	} else if (virt_addr_valid(buf)) {
@@ -732,10 +740,13 @@ static int spi_map_buf(struct spi_master *master, struct device *dev,
 
 	for (i = 0; i < sgs; i++) {
 
-		if (vmalloced_buf) {
+		if (vmalloced_buf || kmap_buf) {
 			min = min_t(size_t,
 				    len, desc_len - offset_in_page(buf));
-			vm_page = vmalloc_to_page(buf);
+			if (vmalloced_buf)
+				vm_page = vmalloc_to_page(buf);
+			else
+				vm_page = kmap_to_page(buf);
 			if (!vm_page) {
 				sg_free_table(sgt);
 				return -ENOMEM;
-- 
2.9.2

WARNING: multiple messages have this Message-ID (diff)
From: Vignesh R <vigneshr@ti.com>
To: Mark Brown <broonie@kernel.org>
Cc: linux-spi@vger.kernel.org, linux-kernel@vger.kernel.org,
	linux-omap@vger.kernel.org, Vignesh R <vigneshr@ti.com>
Subject: [PATCH v6 1/2] spi: Add support to handle kmap'd buffers in spi_map_buf()
Date: Wed, 17 Aug 2016 15:22:36 +0530	[thread overview]
Message-ID: <20160817095237.13101-2-vigneshr@ti.com> (raw)
In-Reply-To: <20160817095237.13101-1-vigneshr@ti.com>

JFFS2 FS might sometime provide kmap'd buffers as destination
buffers to read data from flash. Update spi_map_buf() function to
generate sg_list for such buffers, so that SPI controllers drivers can
use DMA to read data into such buffers.

Signed-off-by: Vignesh R <vigneshr@ti.com>
---

v6: New patch. Extends spi_map_buf() to handle kmap buffers

 drivers/spi/spi.c | 17 ++++++++++++++---
 1 file changed, 14 insertions(+), 3 deletions(-)

diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index b4f6951256b1..a58e102326a1 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -37,6 +37,7 @@
 #include <linux/kthread.h>
 #include <linux/ioport.h>
 #include <linux/acpi.h>
+#include <linux/highmem.h>
 
 #define CREATE_TRACE_POINTS
 #include <trace/events/spi.h>
@@ -709,6 +710,13 @@ static int spi_map_buf(struct spi_master *master, struct device *dev,
 {
 	const bool vmalloced_buf = is_vmalloc_addr(buf);
 	unsigned int max_seg_size = dma_get_max_seg_size(dev);
+#ifdef CONFIG_HIGHMEM
+	const bool kmap_buf = ((unsigned long)buf >= PKMAP_BASE &&
+				(unsigned long)buf < (PKMAP_BASE +
+					(LAST_PKMAP * PAGE_SIZE)));
+#else
+	const bool kmap_buf = false;
+#endif
 	int desc_len;
 	int sgs;
 	struct page *vm_page;
@@ -716,7 +724,7 @@ static int spi_map_buf(struct spi_master *master, struct device *dev,
 	size_t min;
 	int i, ret;
 
-	if (vmalloced_buf) {
+	if (vmalloced_buf || kmap_buf) {
 		desc_len = min_t(int, max_seg_size, PAGE_SIZE);
 		sgs = DIV_ROUND_UP(len + offset_in_page(buf), desc_len);
 	} else if (virt_addr_valid(buf)) {
@@ -732,10 +740,13 @@ static int spi_map_buf(struct spi_master *master, struct device *dev,
 
 	for (i = 0; i < sgs; i++) {
 
-		if (vmalloced_buf) {
+		if (vmalloced_buf || kmap_buf) {
 			min = min_t(size_t,
 				    len, desc_len - offset_in_page(buf));
-			vm_page = vmalloc_to_page(buf);
+			if (vmalloced_buf)
+				vm_page = vmalloc_to_page(buf);
+			else
+				vm_page = kmap_to_page(buf);
 			if (!vm_page) {
 				sg_free_table(sgt);
 				return -ENOMEM;
-- 
2.9.2

  reply	other threads:[~2016-08-17  9:53 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-08-17  9:52 [PATCH v6 0/2] spi: Add DMA support for ti-qspi Vignesh R
2016-08-17  9:52 ` Vignesh R
2016-08-17  9:52 ` Vignesh R
2016-08-17  9:52 ` Vignesh R [this message]
2016-08-17  9:52   ` [PATCH v6 1/2] spi: Add support to handle kmap'd buffers in spi_map_buf() Vignesh R
2016-08-17 11:25   ` Applied "spi: Add support to handle kmap'd buffers in spi_map_buf()" to the spi tree Mark Brown
2016-08-17 11:25     ` Mark Brown
2016-08-17  9:52 ` [PATCH v6 2/2] spi: spi-ti-qspi: Add DMA support for QSPI mmap read Vignesh R
2016-08-17  9:52   ` Vignesh R
2016-08-17  9:52   ` Vignesh R
2016-08-17 11:25   ` Applied "spi: spi-ti-qspi: Add DMA support for QSPI mmap read" to the spi tree Mark Brown
2016-08-17 11:25     ` Mark Brown
2016-08-17 11:25     ` Mark Brown

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20160817095237.13101-2-vigneshr@ti.com \
    --to=vigneshr@ti.com \
    --cc=broonie@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=linux-spi@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.