From: Chen-Yu Tsai <wens@csie.org> To: Maxime Ripard <maxime.ripard@free-electrons.com> Cc: Chen-Yu Tsai <wens@csie.org>, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org Subject: [PATCH v2 3/3] ARM: dts: sun7i: bananapi-m1-plus: Enable USB OTG Date: Tue, 15 Nov 2016 21:51:06 +0800 [thread overview] Message-ID: <20161115135106.438-4-wens@csie.org> (raw) In-Reply-To: <20161115135106.438-1-wens@csie.org> The Bananapi M1+ supports USB OTG, with the PMIC doing VBUS sensing. Enable the USB OTG related functions. Signed-off-by: Chen-Yu Tsai <wens@csie.org> --- arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) diff --git a/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts b/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts index ac19630c1c23..5f7114e13850 100644 --- a/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts +++ b/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts @@ -194,6 +194,10 @@ status = "okay"; }; +&otg_sram { + status = "okay"; +}; + &pio { gmac_power_pin_bpi_m1p: gmac_power_pin@0 { allwinner,pins = "PH23"; @@ -249,13 +253,29 @@ regulator-name = "avcc"; }; +®_usb0_vbus { + status = "okay"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_a>; status = "okay"; }; +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + +&usb_power_supply { + status = "okay"; +}; + &usbphy { + usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ + usb0_vbus_power-supply = <&usb_power_supply>; + usb0_vbus-supply = <®_usb0_vbus>; /* VBUS on usb host ports are tied to DC5V and therefore always on */ status = "okay"; }; -- 2.10.2
WARNING: multiple messages have this Message-ID (diff)
From: wens@csie.org (Chen-Yu Tsai) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH v2 3/3] ARM: dts: sun7i: bananapi-m1-plus: Enable USB OTG Date: Tue, 15 Nov 2016 21:51:06 +0800 [thread overview] Message-ID: <20161115135106.438-4-wens@csie.org> (raw) In-Reply-To: <20161115135106.438-1-wens@csie.org> The Bananapi M1+ supports USB OTG, with the PMIC doing VBUS sensing. Enable the USB OTG related functions. Signed-off-by: Chen-Yu Tsai <wens@csie.org> --- arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts | 20 ++++++++++++++++++++ 1 file changed, 20 insertions(+) diff --git a/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts b/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts index ac19630c1c23..5f7114e13850 100644 --- a/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts +++ b/arch/arm/boot/dts/sun7i-a20-bananapi-m1-plus.dts @@ -194,6 +194,10 @@ status = "okay"; }; +&otg_sram { + status = "okay"; +}; + &pio { gmac_power_pin_bpi_m1p: gmac_power_pin at 0 { allwinner,pins = "PH23"; @@ -249,13 +253,29 @@ regulator-name = "avcc"; }; +®_usb0_vbus { + status = "okay"; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_a>; status = "okay"; }; +&usb_otg { + dr_mode = "otg"; + status = "okay"; +}; + +&usb_power_supply { + status = "okay"; +}; + &usbphy { + usb0_id_det-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ + usb0_vbus_power-supply = <&usb_power_supply>; + usb0_vbus-supply = <®_usb0_vbus>; /* VBUS on usb host ports are tied to DC5V and therefore always on */ status = "okay"; }; -- 2.10.2
next prev parent reply other threads:[~2016-11-15 13:51 UTC|newest] Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top 2016-11-15 13:51 [PATCH v2 0/3] ARM: dts: sun7i: BPI-M1+ USB support Chen-Yu Tsai 2016-11-15 13:51 ` Chen-Yu Tsai 2016-11-15 13:51 ` [PATCH v2 1/3] ARM: dts: sun7i: bananapi-m1-plus: Enable USB PHY for USB host support Chen-Yu Tsai 2016-11-15 13:51 ` Chen-Yu Tsai 2016-11-15 13:51 ` [PATCH v2 2/3] ARM: dts: sun7i: bananapi-m1-plus: Add PMIC regulators Chen-Yu Tsai 2016-11-15 13:51 ` Chen-Yu Tsai 2016-11-15 13:51 ` Chen-Yu Tsai [this message] 2016-11-15 13:51 ` [PATCH v2 3/3] ARM: dts: sun7i: bananapi-m1-plus: Enable USB OTG Chen-Yu Tsai 2016-11-15 17:42 ` [PATCH v2 0/3] ARM: dts: sun7i: BPI-M1+ USB support Maxime Ripard 2016-11-15 17:42 ` Maxime Ripard 2016-11-15 17:42 ` Maxime Ripard
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20161115135106.438-4-wens@csie.org \ --to=wens@csie.org \ --cc=devicetree@vger.kernel.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=maxime.ripard@free-electrons.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.