All of lore.kernel.org
 help / color / mirror / Atom feed
From: Romain Perier <romain.perier-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
To: Mark Brown <broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
	linux-spi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: Jason Cooper <jason-NLaQJdtUoK4Be96aLqz0jA@public.gmane.org>,
	Andrew Lunn <andrew-g2DYL2Zd6BY@public.gmane.org>,
	Sebastian Hesselbarth
	<sebastian.hesselbarth-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
	Gregory Clement
	<gregory.clement-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>,
	devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
	Ian Campbell
	<ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org>,
	Pawel Moll <pawel.moll-5wv7dgnIgG8@public.gmane.org>,
	Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>,
	Kumar Gala <galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org>,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
	Thomas Petazzoni
	<thomas.petazzoni-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>,
	Nadav Haklai <nadavh-eYqpPyKDWXRBDgjK7y7TUQ@public.gmane.org>,
	xigu-eYqpPyKDWXRBDgjK7y7TUQ@public.gmane.org,
	dingwei-eYqpPyKDWXRBDgjK7y7TUQ@public.gmane.org
Subject: [PATCH v2 5/5] arm64: dts: marvell: Enable spi0 on the board Armada-3720-db
Date: Wed, 30 Nov 2016 10:43:51 +0100	[thread overview]
Message-ID: <20161130094351.2748-6-romain.perier@free-electrons.com> (raw)
In-Reply-To: <20161130094351.2748-1-romain.perier-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>

This commit enables the device node spi0 on the official development
board for the Marvell Armada 3700. It also adds sub-node for the 128Mb
SPI-NOR present on the board.

Signed-off-by: Romain Perier <romain.perier-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
---
 arch/arm64/boot/dts/marvell/armada-3720-db.dts | 30 ++++++++++++++++++++++++++
 1 file changed, 30 insertions(+)

diff --git a/arch/arm64/boot/dts/marvell/armada-3720-db.dts b/arch/arm64/boot/dts/marvell/armada-3720-db.dts
index 1372e9a6..0c4eb98 100644
--- a/arch/arm64/boot/dts/marvell/armada-3720-db.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-db.dts
@@ -67,6 +67,36 @@
 	status = "okay";
 };
 
+&spi0 {
+	status = "okay";
+
+	m25p80@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <108000000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <4>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			partition@0 {
+				label = "bootloader";
+				reg = <0x0 0x200000>;
+			};
+			partition@200000 {
+				label = "U-boot Env";
+				reg = <0x200000 0x10000>;
+			};
+			partition@210000 {
+				label = "Linux";
+				reg = <0x210000 0xDF0000>;
+			};
+		};
+	};
+};
+
 /* Exported on the micro USB connector CON32 through an FTDI */
 &uart0 {
 	status = "okay";
-- 
2.9.3

--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

WARNING: multiple messages have this Message-ID (diff)
From: romain.perier@free-electrons.com (Romain Perier)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 5/5] arm64: dts: marvell: Enable spi0 on the board Armada-3720-db
Date: Wed, 30 Nov 2016 10:43:51 +0100	[thread overview]
Message-ID: <20161130094351.2748-6-romain.perier@free-electrons.com> (raw)
In-Reply-To: <20161130094351.2748-1-romain.perier@free-electrons.com>

This commit enables the device node spi0 on the official development
board for the Marvell Armada 3700. It also adds sub-node for the 128Mb
SPI-NOR present on the board.

Signed-off-by: Romain Perier <romain.perier@free-electrons.com>
---
 arch/arm64/boot/dts/marvell/armada-3720-db.dts | 30 ++++++++++++++++++++++++++
 1 file changed, 30 insertions(+)

diff --git a/arch/arm64/boot/dts/marvell/armada-3720-db.dts b/arch/arm64/boot/dts/marvell/armada-3720-db.dts
index 1372e9a6..0c4eb98 100644
--- a/arch/arm64/boot/dts/marvell/armada-3720-db.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-db.dts
@@ -67,6 +67,36 @@
 	status = "okay";
 };
 
+&spi0 {
+	status = "okay";
+
+	m25p80 at 0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <108000000>;
+		spi-rx-bus-width = <4>;
+		spi-tx-bus-width = <4>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+			partition at 0 {
+				label = "bootloader";
+				reg = <0x0 0x200000>;
+			};
+			partition at 200000 {
+				label = "U-boot Env";
+				reg = <0x200000 0x10000>;
+			};
+			partition at 210000 {
+				label = "Linux";
+				reg = <0x210000 0xDF0000>;
+			};
+		};
+	};
+};
+
 /* Exported on the micro USB connector CON32 through an FTDI */
 &uart0 {
 	status = "okay";
-- 
2.9.3

  parent reply	other threads:[~2016-11-30  9:43 UTC|newest]

Thread overview: 20+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-11-30  9:43 [PATCH v2 0/5] Add support for the Armada 3700 SPI controller Romain Perier
2016-11-30  9:43 ` Romain Perier
     [not found] ` <20161130094351.2748-1-romain.perier-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
2016-11-30  9:43   ` [PATCH v2 1/5] spi: Add basic support for Armada 3700 SPI Controller Romain Perier
2016-11-30  9:43     ` Romain Perier
2016-11-30  9:43   ` [PATCH v2 2/5] spi: armada-3700: Add support for the FIFO mode Romain Perier
2016-11-30  9:43     ` Romain Perier
     [not found]     ` <20161130094351.2748-3-romain.perier-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
2016-11-30 15:15       ` Gregory CLEMENT
2016-11-30 15:15         ` Gregory CLEMENT
2016-11-30  9:43   ` [PATCH v2 4/5] arm64: dts: marvell: Add definition of SPI controller for Armada 3700 Romain Perier
2016-11-30  9:43     ` Romain Perier
     [not found]     ` <20161130094351.2748-5-romain.perier-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
2016-11-30 14:55       ` Gregory CLEMENT
2016-11-30 14:55         ` Gregory CLEMENT
2016-11-30  9:43   ` Romain Perier [this message]
2016-11-30  9:43     ` [PATCH v2 5/5] arm64: dts: marvell: Enable spi0 on the board Armada-3720-db Romain Perier
2016-11-30 14:30   ` [PATCH v2 0/5] Add support for the Armada 3700 SPI controller Gregory CLEMENT
2016-11-30 14:30     ` Gregory CLEMENT
2016-11-30  9:43 ` [PATCH v2 3/5] dt-bindings: spi: Add documentation for the Armada 3700 SPI Controller Romain Perier
2016-11-30  9:43   ` Romain Perier
     [not found]   ` <20161130094351.2748-4-romain.perier-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>
2016-12-05 23:27     ` Rob Herring
2016-12-05 23:27       ` Rob Herring

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20161130094351.2748-6-romain.perier@free-electrons.com \
    --to=romain.perier-wi1+55scjutkeb57/3fjtnbpr1lh4cv8@public.gmane.org \
    --cc=andrew-g2DYL2Zd6BY@public.gmane.org \
    --cc=broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
    --cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=dingwei-eYqpPyKDWXRBDgjK7y7TUQ@public.gmane.org \
    --cc=galak-sgV2jX0FEOL9JmXXK+q4OQ@public.gmane.org \
    --cc=gregory.clement-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org \
    --cc=ijc+devicetree-KcIKpvwj1kUDXYZnReoRVg@public.gmane.org \
    --cc=jason-NLaQJdtUoK4Be96aLqz0jA@public.gmane.org \
    --cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
    --cc=linux-spi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=mark.rutland-5wv7dgnIgG8@public.gmane.org \
    --cc=nadavh-eYqpPyKDWXRBDgjK7y7TUQ@public.gmane.org \
    --cc=pawel.moll-5wv7dgnIgG8@public.gmane.org \
    --cc=robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
    --cc=sebastian.hesselbarth-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
    --cc=thomas.petazzoni-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org \
    --cc=xigu-eYqpPyKDWXRBDgjK7y7TUQ@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.