From: Gregory CLEMENT <gregory.clement@free-electrons.com> To: Linus Walleij <linus.walleij@linaro.org>, linux-gpio@vger.kernel.org Cc: Jason Cooper <jason@lakedaemon.net>, Andrew Lunn <andrew@lunn.ch>, Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>, Gregory CLEMENT <gregory.clement@free-electrons.com>, Thomas Petazzoni <thomas.petazzoni@free-electrons.com>, linux-arm-kernel@lists.infradead.org, Nadav Haklai <nadavh@marvell.com>, Victor Gu <xigu@marvell.com>, Omri Itach <omrii@marvell.com>, Marcin Wojtas <mw@semihalf.com>, Wilson Ding <dingwei@marvell.com>, Hua Jing <jinghua@marvell.com>, Terry Zhou <bjzhou@marvell.com> Subject: [PATCH 5/6] ARM64: dts: marvell: Add pinctrl nodes for Armada 3700 Date: Thu, 22 Dec 2016 18:25:00 +0100 [thread overview] Message-ID: <20161222172501.16121-6-gregory.clement@free-electrons.com> (raw) In-Reply-To: <20161222172501.16121-1-gregory.clement@free-electrons.com> Add the nodes for the two pin controller present in the Armada 37xx SoCs. Initially the node was named gpio1 using the same name that for the register range in the datasheet. However renaming it pinctr_nb (nb for North Bridge) makes more sens. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> --- arch/arm64/boot/dts/marvell/armada-37xx.dtsi | 30 +++++++++++++++++++++++++--- 1 file changed, 27 insertions(+), 3 deletions(-) diff --git a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi index 926a4024c3dd..682ec009121c 100644 --- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi @@ -157,16 +157,40 @@ #clock-cells = <1>; }; - gpio1: gpio@13800 { - compatible = "marvell,mvebu-gpio-3700", + pinctrl_nb: pinctrl-nb@13800 { + compatible = "marvell,armada3710-nb-pinctrl", "syscon", "simple-mfd"; - reg = <0x13800 0x500>; + reg = <0x13800 0x100>, <0x13C00 0x20>; + interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; xtalclk: xtal-clk { compatible = "marvell,armada-3700-xtal-clock"; clock-output-names = "xtal"; #clock-cells = <0>; }; + }; + }; + + pinctrl_sb: pinctrl-sb@18800 { + compatible = "marvell,armada3710-sb-pinctrl", + "syscon", "simple-mfd"; + reg = <0x18800 0x100>, <0x18C00 0x20>; + interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>; }; eth0: ethernet@30000 { -- 2.11.0
WARNING: multiple messages have this Message-ID (diff)
From: gregory.clement@free-electrons.com (Gregory CLEMENT) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH 5/6] ARM64: dts: marvell: Add pinctrl nodes for Armada 3700 Date: Thu, 22 Dec 2016 18:25:00 +0100 [thread overview] Message-ID: <20161222172501.16121-6-gregory.clement@free-electrons.com> (raw) In-Reply-To: <20161222172501.16121-1-gregory.clement@free-electrons.com> Add the nodes for the two pin controller present in the Armada 37xx SoCs. Initially the node was named gpio1 using the same name that for the register range in the datasheet. However renaming it pinctr_nb (nb for North Bridge) makes more sens. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> --- arch/arm64/boot/dts/marvell/armada-37xx.dtsi | 30 +++++++++++++++++++++++++--- 1 file changed, 27 insertions(+), 3 deletions(-) diff --git a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi index 926a4024c3dd..682ec009121c 100644 --- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi @@ -157,16 +157,40 @@ #clock-cells = <1>; }; - gpio1: gpio at 13800 { - compatible = "marvell,mvebu-gpio-3700", + pinctrl_nb: pinctrl-nb at 13800 { + compatible = "marvell,armada3710-nb-pinctrl", "syscon", "simple-mfd"; - reg = <0x13800 0x500>; + reg = <0x13800 0x100>, <0x13C00 0x20>; + interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>; xtalclk: xtal-clk { compatible = "marvell,armada-3700-xtal-clock"; clock-output-names = "xtal"; #clock-cells = <0>; }; + }; + }; + + pinctrl_sb: pinctrl-sb at 18800 { + compatible = "marvell,armada3710-sb-pinctrl", + "syscon", "simple-mfd"; + reg = <0x18800 0x100>, <0x18C00 0x20>; + interrupts = <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>; }; eth0: ethernet at 30000 { -- 2.11.0
next prev parent reply other threads:[~2016-12-22 17:25 UTC|newest] Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top 2016-12-22 17:24 [PATCH 0/6] Add support for pinctrl/gpio on Armada 37xx Gregory CLEMENT 2016-12-22 17:24 ` Gregory CLEMENT 2016-12-22 17:24 ` [PATCH 1/6] pinctrl: dt-bindings: Add documentation for Armada 37xx pin controllers Gregory CLEMENT 2016-12-22 17:24 ` Gregory CLEMENT 2016-12-30 8:35 ` Linus Walleij 2016-12-30 8:35 ` Linus Walleij 2017-03-22 11:42 ` Gregory CLEMENT 2017-03-22 11:42 ` Gregory CLEMENT 2016-12-22 17:24 ` [PATCH 2/6] pinctrl: armada-37xx: Add pin controller support for Armada 37xx Gregory CLEMENT 2016-12-22 17:24 ` Gregory CLEMENT 2016-12-30 8:44 ` Linus Walleij 2016-12-30 8:44 ` Linus Walleij 2017-03-22 11:47 ` Gregory CLEMENT 2017-03-22 11:47 ` Gregory CLEMENT 2016-12-22 17:24 ` [PATCH 3/6] pinctrl: armada-37xx: Add gpio support Gregory CLEMENT 2016-12-22 17:24 ` Gregory CLEMENT 2016-12-30 8:51 ` Linus Walleij 2016-12-30 8:51 ` Linus Walleij 2017-03-22 11:54 ` Gregory CLEMENT 2017-03-22 11:54 ` Gregory CLEMENT 2017-03-23 10:28 ` Linus Walleij 2017-03-23 10:28 ` Linus Walleij 2017-03-23 14:47 ` Gregory CLEMENT 2017-03-23 14:47 ` Gregory CLEMENT 2016-12-22 17:24 ` [PATCH 4/6] pinctrl: aramda-37xx: Add irqchip support Gregory CLEMENT 2016-12-22 17:24 ` Gregory CLEMENT 2016-12-30 8:58 ` Linus Walleij 2016-12-30 8:58 ` Linus Walleij 2017-03-22 12:02 ` Gregory CLEMENT 2017-03-22 12:02 ` Gregory CLEMENT 2017-03-23 10:36 ` Linus Walleij 2017-03-23 10:36 ` Linus Walleij 2017-03-23 14:41 ` Gregory CLEMENT 2017-03-23 14:41 ` Gregory CLEMENT 2016-12-22 17:25 ` Gregory CLEMENT [this message] 2016-12-22 17:25 ` [PATCH 5/6] ARM64: dts: marvell: Add pinctrl nodes for Armada 3700 Gregory CLEMENT 2016-12-22 17:25 ` [PATCH 6/6] ARM64: dts: marvell: armada37xx: add pinctrl definition Gregory CLEMENT 2016-12-22 17:25 ` Gregory CLEMENT 2016-12-30 9:00 ` Linus Walleij 2016-12-30 9:00 ` Linus Walleij
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20161222172501.16121-6-gregory.clement@free-electrons.com \ --to=gregory.clement@free-electrons.com \ --cc=andrew@lunn.ch \ --cc=bjzhou@marvell.com \ --cc=dingwei@marvell.com \ --cc=jason@lakedaemon.net \ --cc=jinghua@marvell.com \ --cc=linus.walleij@linaro.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-gpio@vger.kernel.org \ --cc=mw@semihalf.com \ --cc=nadavh@marvell.com \ --cc=omrii@marvell.com \ --cc=sebastian.hesselbarth@gmail.com \ --cc=thomas.petazzoni@free-electrons.com \ --cc=xigu@marvell.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.