From: Gregory CLEMENT <gregory.clement@free-electrons.com> To: Linus Walleij <linus.walleij@linaro.org>, linux-gpio@vger.kernel.org Cc: Jason Cooper <jason@lakedaemon.net>, Andrew Lunn <andrew@lunn.ch>, Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>, Gregory CLEMENT <gregory.clement@free-electrons.com>, Thomas Petazzoni <thomas.petazzoni@free-electrons.com>, linux-arm-kernel@lists.infradead.org, Nadav Haklai <nadavh@marvell.com>, Victor Gu <xigu@marvell.com>, Omri Itach <omrii@marvell.com>, Marcin Wojtas <mw@semihalf.com>, Wilson Ding <dingwei@marvell.com>, Hua Jing <jinghua@marvell.com>, Terry Zhou <bjzhou@marvell.com> Subject: [PATCH 6/6] ARM64: dts: marvell: armada37xx: add pinctrl definition Date: Thu, 22 Dec 2016 18:25:01 +0100 [thread overview] Message-ID: <20161222172501.16121-7-gregory.clement@free-electrons.com> (raw) In-Reply-To: <20161222172501.16121-1-gregory.clement@free-electrons.com> Start to populate the device tree of the Armada 37xx with the pincontrol configuration used on the board providing a dts. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> --- arch/arm64/boot/dts/marvell/armada-3720-db.dts | 8 +++++++ arch/arm64/boot/dts/marvell/armada-37xx.dtsi | 32 +++++++++++++++++++++++++- 2 files changed, 39 insertions(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/marvell/armada-3720-db.dts b/arch/arm64/boot/dts/marvell/armada-3720-db.dts index 935d37f82ce8..cf262b8ec4ad 100644 --- a/arch/arm64/boot/dts/marvell/armada-3720-db.dts +++ b/arch/arm64/boot/dts/marvell/armada-3720-db.dts @@ -63,6 +63,8 @@ }; &i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; status = "okay"; }; @@ -73,6 +75,8 @@ &spi0 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&spi_quad_pins>; m25p80@0 { compatible = "jedec,spi-nor"; @@ -103,6 +107,8 @@ /* Exported on the micro USB connector CON32 through an FTDI */ &uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; status = "okay"; }; @@ -128,6 +134,8 @@ }; ð0 { + pinctrl-names = "default"; + pinctrl-0 = <&rgmii_pins>; phy-mode = "rgmii-id"; phy = <&phy0>; status = "okay"; diff --git a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi index 682ec009121c..120e1b82c8b0 100644 --- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi @@ -179,8 +179,32 @@ clock-output-names = "xtal"; #clock-cells = <0>; }; + + spi_quad_pins: spi-quad-pins { + groups = "spi_quad"; + function = "spi"; }; - }; + + i2c1_pins: i2c1-pins { + groups = "i2c1"; + function = "i2c"; + }; + + i2c2_pins: i2c2-pins { + groups = "i2c2"; + function = "i2c"; + }; + + uart1_pins: uart1-pins { + groups = "uart1"; + function = "uart"; + }; + + uart2_pins: uart2-pins { + groups = "uart2"; + function = "uart"; + }; +}; pinctrl_sb: pinctrl-sb@18800 { compatible = "marvell,armada3710-sb-pinctrl", @@ -191,6 +215,12 @@ <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>; + + rgmii_pins: mii-pins { + groups = "rgmii"; + function = "mii"; + }; + }; eth0: ethernet@30000 { -- 2.11.0
WARNING: multiple messages have this Message-ID (diff)
From: gregory.clement@free-electrons.com (Gregory CLEMENT) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH 6/6] ARM64: dts: marvell: armada37xx: add pinctrl definition Date: Thu, 22 Dec 2016 18:25:01 +0100 [thread overview] Message-ID: <20161222172501.16121-7-gregory.clement@free-electrons.com> (raw) In-Reply-To: <20161222172501.16121-1-gregory.clement@free-electrons.com> Start to populate the device tree of the Armada 37xx with the pincontrol configuration used on the board providing a dts. Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com> --- arch/arm64/boot/dts/marvell/armada-3720-db.dts | 8 +++++++ arch/arm64/boot/dts/marvell/armada-37xx.dtsi | 32 +++++++++++++++++++++++++- 2 files changed, 39 insertions(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/marvell/armada-3720-db.dts b/arch/arm64/boot/dts/marvell/armada-3720-db.dts index 935d37f82ce8..cf262b8ec4ad 100644 --- a/arch/arm64/boot/dts/marvell/armada-3720-db.dts +++ b/arch/arm64/boot/dts/marvell/armada-3720-db.dts @@ -63,6 +63,8 @@ }; &i2c0 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins>; status = "okay"; }; @@ -73,6 +75,8 @@ &spi0 { status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&spi_quad_pins>; m25p80 at 0 { compatible = "jedec,spi-nor"; @@ -103,6 +107,8 @@ /* Exported on the micro USB connector CON32 through an FTDI */ &uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins>; status = "okay"; }; @@ -128,6 +134,8 @@ }; ð0 { + pinctrl-names = "default"; + pinctrl-0 = <&rgmii_pins>; phy-mode = "rgmii-id"; phy = <&phy0>; status = "okay"; diff --git a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi index 682ec009121c..120e1b82c8b0 100644 --- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi @@ -179,8 +179,32 @@ clock-output-names = "xtal"; #clock-cells = <0>; }; + + spi_quad_pins: spi-quad-pins { + groups = "spi_quad"; + function = "spi"; }; - }; + + i2c1_pins: i2c1-pins { + groups = "i2c1"; + function = "i2c"; + }; + + i2c2_pins: i2c2-pins { + groups = "i2c2"; + function = "i2c"; + }; + + uart1_pins: uart1-pins { + groups = "uart1"; + function = "uart"; + }; + + uart2_pins: uart2-pins { + groups = "uart2"; + function = "uart"; + }; +}; pinctrl_sb: pinctrl-sb at 18800 { compatible = "marvell,armada3710-sb-pinctrl", @@ -191,6 +215,12 @@ <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>; + + rgmii_pins: mii-pins { + groups = "rgmii"; + function = "mii"; + }; + }; eth0: ethernet at 30000 { -- 2.11.0
next prev parent reply other threads:[~2016-12-22 17:25 UTC|newest] Thread overview: 40+ messages / expand[flat|nested] mbox.gz Atom feed top 2016-12-22 17:24 [PATCH 0/6] Add support for pinctrl/gpio on Armada 37xx Gregory CLEMENT 2016-12-22 17:24 ` Gregory CLEMENT 2016-12-22 17:24 ` [PATCH 1/6] pinctrl: dt-bindings: Add documentation for Armada 37xx pin controllers Gregory CLEMENT 2016-12-22 17:24 ` Gregory CLEMENT 2016-12-30 8:35 ` Linus Walleij 2016-12-30 8:35 ` Linus Walleij 2017-03-22 11:42 ` Gregory CLEMENT 2017-03-22 11:42 ` Gregory CLEMENT 2016-12-22 17:24 ` [PATCH 2/6] pinctrl: armada-37xx: Add pin controller support for Armada 37xx Gregory CLEMENT 2016-12-22 17:24 ` Gregory CLEMENT 2016-12-30 8:44 ` Linus Walleij 2016-12-30 8:44 ` Linus Walleij 2017-03-22 11:47 ` Gregory CLEMENT 2017-03-22 11:47 ` Gregory CLEMENT 2016-12-22 17:24 ` [PATCH 3/6] pinctrl: armada-37xx: Add gpio support Gregory CLEMENT 2016-12-22 17:24 ` Gregory CLEMENT 2016-12-30 8:51 ` Linus Walleij 2016-12-30 8:51 ` Linus Walleij 2017-03-22 11:54 ` Gregory CLEMENT 2017-03-22 11:54 ` Gregory CLEMENT 2017-03-23 10:28 ` Linus Walleij 2017-03-23 10:28 ` Linus Walleij 2017-03-23 14:47 ` Gregory CLEMENT 2017-03-23 14:47 ` Gregory CLEMENT 2016-12-22 17:24 ` [PATCH 4/6] pinctrl: aramda-37xx: Add irqchip support Gregory CLEMENT 2016-12-22 17:24 ` Gregory CLEMENT 2016-12-30 8:58 ` Linus Walleij 2016-12-30 8:58 ` Linus Walleij 2017-03-22 12:02 ` Gregory CLEMENT 2017-03-22 12:02 ` Gregory CLEMENT 2017-03-23 10:36 ` Linus Walleij 2017-03-23 10:36 ` Linus Walleij 2017-03-23 14:41 ` Gregory CLEMENT 2017-03-23 14:41 ` Gregory CLEMENT 2016-12-22 17:25 ` [PATCH 5/6] ARM64: dts: marvell: Add pinctrl nodes for Armada 3700 Gregory CLEMENT 2016-12-22 17:25 ` Gregory CLEMENT 2016-12-22 17:25 ` Gregory CLEMENT [this message] 2016-12-22 17:25 ` [PATCH 6/6] ARM64: dts: marvell: armada37xx: add pinctrl definition Gregory CLEMENT 2016-12-30 9:00 ` Linus Walleij 2016-12-30 9:00 ` Linus Walleij
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20161222172501.16121-7-gregory.clement@free-electrons.com \ --to=gregory.clement@free-electrons.com \ --cc=andrew@lunn.ch \ --cc=bjzhou@marvell.com \ --cc=dingwei@marvell.com \ --cc=jason@lakedaemon.net \ --cc=jinghua@marvell.com \ --cc=linus.walleij@linaro.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-gpio@vger.kernel.org \ --cc=mw@semihalf.com \ --cc=nadavh@marvell.com \ --cc=omrii@marvell.com \ --cc=sebastian.hesselbarth@gmail.com \ --cc=thomas.petazzoni@free-electrons.com \ --cc=xigu@marvell.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.