From: Paul Cercueil <paul@crapouillou.net> To: Linus Walleij <linus.walleij@linaro.org>, Rob Herring <robh+dt@kernel.org>, Mark Rutland <mark.rutland@arm.com>, Ralf Baechle <ralf@linux-mips.org>, Ulf Hansson <ulf.hansson@linaro.org>, Boris Brezillon <boris.brezillon@free-electrons.com>, Thierry Reding <thierry.reding@gmail.com>, Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>, Maarten ter Huurne <maarten@treewalker.org>, Lars-Peter Clausen <lars@metafoo.de>, Paul Burton <paul.burton@imgtec.com> Cc: linux-gpio@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-mips@linux-mips.org, linux-mmc@vger.kernel.org, linux-mtd@lists.infradead.org, linux-pwm@vger.kernel.org, linux-fbdev@vger.kernel.org, james.hogan@imgtec.com, Paul Cercueil <paul@crapouillou.net> Subject: [PATCH 09/13] mmc: jz4740: Let the pinctrl driver configure the pins Date: Wed, 18 Jan 2017 00:14:17 +0100 [thread overview] Message-ID: <20170117231421.16310-10-paul@crapouillou.net> (raw) In-Reply-To: <20170117231421.16310-1-paul@crapouillou.net> Now that the JZ4740 and similar SoCs have a pinctrl driver, we rely on the pins being properly configured before the driver probes. Signed-off-by: Paul Cercueil <paul@crapouillou.net> --- drivers/mmc/host/jz4740_mmc.c | 59 ++----------------------------------------- 1 file changed, 2 insertions(+), 57 deletions(-) diff --git a/drivers/mmc/host/jz4740_mmc.c b/drivers/mmc/host/jz4740_mmc.c index 819ad32964fc..28a8e0acd70a 100644 --- a/drivers/mmc/host/jz4740_mmc.c +++ b/drivers/mmc/host/jz4740_mmc.c @@ -27,7 +27,6 @@ #include <linux/bitops.h> #include <linux/gpio.h> -#include <asm/mach-jz4740/gpio.h> #include <asm/cacheflush.h> #include <linux/dma-mapping.h> #include <linux/dmaengine.h> @@ -906,15 +905,6 @@ static const struct mmc_host_ops jz4740_mmc_ops = { .enable_sdio_irq = jz4740_mmc_enable_sdio_irq, }; -static const struct jz_gpio_bulk_request jz4740_mmc_pins[] = { - JZ_GPIO_BULK_PIN(MSC_CMD), - JZ_GPIO_BULK_PIN(MSC_CLK), - JZ_GPIO_BULK_PIN(MSC_DATA0), - JZ_GPIO_BULK_PIN(MSC_DATA1), - JZ_GPIO_BULK_PIN(MSC_DATA2), - JZ_GPIO_BULK_PIN(MSC_DATA3), -}; - static int jz4740_mmc_request_gpio(struct device *dev, int gpio, const char *name, bool output, int value) { @@ -978,15 +968,6 @@ static void jz4740_mmc_free_gpios(struct platform_device *pdev) gpio_free(pdata->gpio_power); } -static inline size_t jz4740_mmc_num_pins(struct jz4740_mmc_host *host) -{ - size_t num_pins = ARRAY_SIZE(jz4740_mmc_pins); - if (host->pdata && host->pdata->data_1bit) - num_pins -= 3; - - return num_pins; -} - static int jz4740_mmc_probe(struct platform_device* pdev) { int ret; @@ -1027,15 +1008,9 @@ static int jz4740_mmc_probe(struct platform_device* pdev) goto err_free_host; } - ret = jz_gpio_bulk_request(jz4740_mmc_pins, jz4740_mmc_num_pins(host)); - if (ret) { - dev_err(&pdev->dev, "Failed to request mmc pins: %d\n", ret); - goto err_free_host; - } - ret = jz4740_mmc_request_gpios(mmc, pdev); if (ret) - goto err_gpio_bulk_free; + goto err_release_dma; mmc->ops = &jz4740_mmc_ops; mmc->f_min = JZ_MMC_CLK_RATE / 128; @@ -1091,10 +1066,9 @@ static int jz4740_mmc_probe(struct platform_device* pdev) free_irq(host->irq, host); err_free_gpios: jz4740_mmc_free_gpios(pdev); -err_gpio_bulk_free: +err_release_dma: if (host->use_dma) jz4740_mmc_release_dma_channels(host); - jz_gpio_bulk_free(jz4740_mmc_pins, jz4740_mmc_num_pins(host)); err_free_host: mmc_free_host(mmc); @@ -1114,7 +1088,6 @@ static int jz4740_mmc_remove(struct platform_device *pdev) free_irq(host->irq, host); jz4740_mmc_free_gpios(pdev); - jz_gpio_bulk_free(jz4740_mmc_pins, jz4740_mmc_num_pins(host)); if (host->use_dma) jz4740_mmc_release_dma_channels(host); @@ -1124,39 +1097,11 @@ static int jz4740_mmc_remove(struct platform_device *pdev) return 0; } -#ifdef CONFIG_PM_SLEEP - -static int jz4740_mmc_suspend(struct device *dev) -{ - struct jz4740_mmc_host *host = dev_get_drvdata(dev); - - jz_gpio_bulk_suspend(jz4740_mmc_pins, jz4740_mmc_num_pins(host)); - - return 0; -} - -static int jz4740_mmc_resume(struct device *dev) -{ - struct jz4740_mmc_host *host = dev_get_drvdata(dev); - - jz_gpio_bulk_resume(jz4740_mmc_pins, jz4740_mmc_num_pins(host)); - - return 0; -} - -static SIMPLE_DEV_PM_OPS(jz4740_mmc_pm_ops, jz4740_mmc_suspend, - jz4740_mmc_resume); -#define JZ4740_MMC_PM_OPS (&jz4740_mmc_pm_ops) -#else -#define JZ4740_MMC_PM_OPS NULL -#endif - static struct platform_driver jz4740_mmc_driver = { .probe = jz4740_mmc_probe, .remove = jz4740_mmc_remove, .driver = { .name = "jz4740-mmc", - .pm = JZ4740_MMC_PM_OPS, }, }; -- 2.11.0
WARNING: multiple messages have this Message-ID (diff)
From: Paul Cercueil <paul@crapouillou.net> To: Linus Walleij <linus.walleij@linaro.org>, Rob Herring <robh+dt@kernel.org>, Mark Rutland <mark.rutland@arm.com>, Ralf Baechle <ralf@linux-mips.org>, Ulf Hansson <ulf.hansson@linaro.org>, Boris Brezillon <boris.brezillon@free-electrons.com>, Thierry Reding <thierry.reding@gmail.com>, Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>, Maarten ter Huurne <maarten@treewalker.org>, Lars-Peter Clausen <lars@metafoo.de>, Paul Burton <paul.burton@imgtec.com> Cc: linux-gpio@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-mips@linux-mips.org, linux-mmc@vger.kernel.org, linux-mtd@lists.infradead.org, linux-pwm@vger.kernel.org, linux-fbdev@vger.kernel.org, james.hogan@imgtec.com, Paul Cercueil <paul@crapouillou.net> Subject: [PATCH 09/13] mmc: jz4740: Let the pinctrl driver configure the pins Date: Tue, 17 Jan 2017 23:14:17 +0000 [thread overview] Message-ID: <20170117231421.16310-10-paul@crapouillou.net> (raw) In-Reply-To: <20170117231421.16310-1-paul@crapouillou.net> Now that the JZ4740 and similar SoCs have a pinctrl driver, we rely on the pins being properly configured before the driver probes. Signed-off-by: Paul Cercueil <paul@crapouillou.net> --- drivers/mmc/host/jz4740_mmc.c | 59 ++----------------------------------------- 1 file changed, 2 insertions(+), 57 deletions(-) diff --git a/drivers/mmc/host/jz4740_mmc.c b/drivers/mmc/host/jz4740_mmc.c index 819ad32964fc..28a8e0acd70a 100644 --- a/drivers/mmc/host/jz4740_mmc.c +++ b/drivers/mmc/host/jz4740_mmc.c @@ -27,7 +27,6 @@ #include <linux/bitops.h> #include <linux/gpio.h> -#include <asm/mach-jz4740/gpio.h> #include <asm/cacheflush.h> #include <linux/dma-mapping.h> #include <linux/dmaengine.h> @@ -906,15 +905,6 @@ static const struct mmc_host_ops jz4740_mmc_ops = { .enable_sdio_irq = jz4740_mmc_enable_sdio_irq, }; -static const struct jz_gpio_bulk_request jz4740_mmc_pins[] = { - JZ_GPIO_BULK_PIN(MSC_CMD), - JZ_GPIO_BULK_PIN(MSC_CLK), - JZ_GPIO_BULK_PIN(MSC_DATA0), - JZ_GPIO_BULK_PIN(MSC_DATA1), - JZ_GPIO_BULK_PIN(MSC_DATA2), - JZ_GPIO_BULK_PIN(MSC_DATA3), -}; - static int jz4740_mmc_request_gpio(struct device *dev, int gpio, const char *name, bool output, int value) { @@ -978,15 +968,6 @@ static void jz4740_mmc_free_gpios(struct platform_device *pdev) gpio_free(pdata->gpio_power); } -static inline size_t jz4740_mmc_num_pins(struct jz4740_mmc_host *host) -{ - size_t num_pins = ARRAY_SIZE(jz4740_mmc_pins); - if (host->pdata && host->pdata->data_1bit) - num_pins -= 3; - - return num_pins; -} - static int jz4740_mmc_probe(struct platform_device* pdev) { int ret; @@ -1027,15 +1008,9 @@ static int jz4740_mmc_probe(struct platform_device* pdev) goto err_free_host; } - ret = jz_gpio_bulk_request(jz4740_mmc_pins, jz4740_mmc_num_pins(host)); - if (ret) { - dev_err(&pdev->dev, "Failed to request mmc pins: %d\n", ret); - goto err_free_host; - } - ret = jz4740_mmc_request_gpios(mmc, pdev); if (ret) - goto err_gpio_bulk_free; + goto err_release_dma; mmc->ops = &jz4740_mmc_ops; mmc->f_min = JZ_MMC_CLK_RATE / 128; @@ -1091,10 +1066,9 @@ static int jz4740_mmc_probe(struct platform_device* pdev) free_irq(host->irq, host); err_free_gpios: jz4740_mmc_free_gpios(pdev); -err_gpio_bulk_free: +err_release_dma: if (host->use_dma) jz4740_mmc_release_dma_channels(host); - jz_gpio_bulk_free(jz4740_mmc_pins, jz4740_mmc_num_pins(host)); err_free_host: mmc_free_host(mmc); @@ -1114,7 +1088,6 @@ static int jz4740_mmc_remove(struct platform_device *pdev) free_irq(host->irq, host); jz4740_mmc_free_gpios(pdev); - jz_gpio_bulk_free(jz4740_mmc_pins, jz4740_mmc_num_pins(host)); if (host->use_dma) jz4740_mmc_release_dma_channels(host); @@ -1124,39 +1097,11 @@ static int jz4740_mmc_remove(struct platform_device *pdev) return 0; } -#ifdef CONFIG_PM_SLEEP - -static int jz4740_mmc_suspend(struct device *dev) -{ - struct jz4740_mmc_host *host = dev_get_drvdata(dev); - - jz_gpio_bulk_suspend(jz4740_mmc_pins, jz4740_mmc_num_pins(host)); - - return 0; -} - -static int jz4740_mmc_resume(struct device *dev) -{ - struct jz4740_mmc_host *host = dev_get_drvdata(dev); - - jz_gpio_bulk_resume(jz4740_mmc_pins, jz4740_mmc_num_pins(host)); - - return 0; -} - -static SIMPLE_DEV_PM_OPS(jz4740_mmc_pm_ops, jz4740_mmc_suspend, - jz4740_mmc_resume); -#define JZ4740_MMC_PM_OPS (&jz4740_mmc_pm_ops) -#else -#define JZ4740_MMC_PM_OPS NULL -#endif - static struct platform_driver jz4740_mmc_driver = { .probe = jz4740_mmc_probe, .remove = jz4740_mmc_remove, .driver = { .name = "jz4740-mmc", - .pm = JZ4740_MMC_PM_OPS, }, }; -- 2.11.0
next prev parent reply other threads:[~2017-01-17 23:14 UTC|newest] Thread overview: 359+ messages / expand[flat|nested] mbox.gz Atom feed top 2017-01-17 23:14 [PATCH 00/13] Ingenic JZ4740 / JZ4780 pinctrl driver Paul Cercueil 2017-01-17 23:14 ` Paul Cercueil 2017-01-17 23:14 ` [PATCH 01/13] Documentation: dt/bindings: Document pinctrl-ingenic Paul Cercueil 2017-01-17 23:14 ` Paul Cercueil 2017-01-18 23:45 ` Linus Walleij 2017-01-18 23:45 ` Linus Walleij 2017-01-18 23:45 ` Linus Walleij 2017-01-17 23:14 ` [PATCH 02/13] pinctrl-jz4740: add a pinctrl driver for the Ingenic jz4740 SoC Paul Cercueil 2017-01-17 23:14 ` Paul Cercueil 2017-01-18 10:16 ` Linus Walleij 2017-01-18 10:16 ` Linus Walleij 2017-01-18 10:16 ` Linus Walleij 2017-01-17 23:14 ` [PATCH 03/13] pinctrl-jz4780: add a pinctrl driver for the Ingenic jz4780 SoC Paul Cercueil 2017-01-17 23:14 ` Paul Cercueil 2017-01-17 23:14 ` [PATCH 04/13] MIPS: ingenic: Enable pinctrl for all ingenic SoCs Paul Cercueil 2017-01-17 23:14 ` Paul Cercueil 2017-01-17 23:14 ` [PATCH 05/13] MIPS: jz4740: DTS: Add node for the jz4740-pinctrl driver Paul Cercueil 2017-01-17 23:14 ` Paul Cercueil 2017-01-18 23:50 ` Linus Walleij 2017-01-18 23:50 ` Linus Walleij 2017-01-18 23:50 ` Linus Walleij 2017-01-17 23:14 ` [PATCH 06/13] MIPS: jz4780: DTS: Add node for the jz4780-pinctrl driver Paul Cercueil 2017-01-17 23:14 ` Paul Cercueil 2017-01-17 23:14 ` [PATCH 07/13] MIPS: JZ4740: Qi LB60: Add pinctrl configuration for several drivers Paul Cercueil 2017-01-17 23:14 ` Paul Cercueil 2017-01-17 23:14 ` [PATCH 08/13] MIPS: JZ4780: CI20: " Paul Cercueil 2017-01-17 23:14 ` Paul Cercueil 2017-01-17 23:14 ` Paul Cercueil [this message] 2017-01-17 23:14 ` [PATCH 09/13] mmc: jz4740: Let the pinctrl driver configure the pins Paul Cercueil 2017-01-19 10:55 ` Ulf Hansson 2017-01-19 10:55 ` Ulf Hansson 2017-01-19 10:55 ` Ulf Hansson [not found] ` <CAPDyKFp4idZx+ynQByz22zwsiK+reBcvt3OdHm1kR2QUy+sUhw-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org> 2017-01-20 11:59 ` Paul Cercueil 2017-01-20 11:59 ` Paul Cercueil 2017-01-20 11:59 ` Paul Cercueil 2017-01-17 23:14 ` [PATCH 10/13] mtd: nand: " Paul Cercueil 2017-01-17 23:14 ` Paul Cercueil 2017-01-27 17:33 ` Boris Brezillon 2017-01-27 17:33 ` Boris Brezillon 2017-01-17 23:14 ` [PATCH 11/13] fbdev: jz4740-fb: " Paul Cercueil 2017-01-17 23:14 ` Paul Cercueil 2017-01-17 23:14 ` [PATCH 12/13] pwm: jz4740: " Paul Cercueil 2017-01-17 23:14 ` Paul Cercueil 2017-01-18 7:20 ` Thierry Reding 2017-01-18 7:20 ` Thierry Reding 2017-01-17 23:14 ` [PATCH 13/13] MIPS: jz4740: Remove custom GPIO code Paul Cercueil 2017-01-17 23:14 ` Paul Cercueil 2017-01-18 7:27 ` Thierry Reding 2017-01-18 7:27 ` Thierry Reding 2017-01-18 7:27 ` Thierry Reding 2017-01-19 11:24 ` Paul Cercueil 2017-01-19 11:24 ` Paul Cercueil 2017-01-19 9:07 ` Linus Walleij 2017-01-19 9:07 ` Linus Walleij 2017-01-19 9:07 ` Linus Walleij 2017-01-20 10:01 ` Paul Cercueil 2017-01-20 10:01 ` Paul Cercueil 2017-01-18 7:15 ` [PATCH 00/13] Ingenic JZ4740 / JZ4780 pinctrl driver Thierry Reding 2017-01-18 7:15 ` Thierry Reding 2017-01-19 11:19 ` Paul Cercueil 2017-01-19 11:19 ` Paul Cercueil 2017-01-20 8:40 ` Linus Walleij 2017-01-20 8:40 ` Linus Walleij 2017-01-20 8:40 ` Linus Walleij 2017-01-20 10:17 ` Paul Cercueil 2017-01-20 10:17 ` Paul Cercueil 2017-01-22 14:49 ` [PATCH v2 00/14] " Paul Cercueil 2017-01-22 14:49 ` Paul Cercueil 2017-01-22 14:49 ` [PATCH v2 01/14] Documentation: dt/bindings: Document pinctrl-ingenic Paul Cercueil 2017-01-22 14:49 ` Paul Cercueil 2017-01-27 11:18 ` Linus Walleij 2017-01-27 11:18 ` Linus Walleij 2017-01-27 11:18 ` Linus Walleij 2017-01-27 15:27 ` Paul Cercueil 2017-01-27 15:27 ` Paul Cercueil [not found] ` <08e9505d2d366557950f8e6a4e81f57a-p8hskv8pF7lEPksTRSfcJOTW4wlIGRCZ@public.gmane.org> 2017-01-31 12:59 ` Linus Walleij 2017-01-31 12:59 ` Linus Walleij 2017-01-31 12:59 ` Linus Walleij 2017-01-22 14:49 ` [PATCH v2 02/14] Documentation: dt/bindings: Document pinctrl-gpio Paul Cercueil 2017-01-22 14:49 ` Paul Cercueil [not found] ` <20170122144947.16158-1-paul-icTtO2rgO2OTuSrc4Mpeew@public.gmane.org> 2017-01-22 14:49 ` [PATCH v2 03/14] pinctrl-ingenic: add a pinctrl driver for the Ingenic jz47xx SoCs Paul Cercueil 2017-01-22 14:49 ` Paul Cercueil 2017-01-22 14:49 ` Paul Cercueil 2017-01-22 14:49 ` [PATCH v2 08/14] MIPS: JZ4740: Qi LB60: Add pinctrl configuration for several drivers Paul Cercueil 2017-01-22 14:49 ` Paul Cercueil 2017-01-22 14:49 ` Paul Cercueil 2017-01-22 14:49 ` [PATCH v2 11/14] mtd: nand: jz4740: Let the pinctrl driver configure the pins Paul Cercueil 2017-01-22 14:49 ` Paul Cercueil 2017-01-22 14:49 ` Paul Cercueil 2017-01-22 14:49 ` [PATCH v2 04/14] GPIO: Add gpio-ingenic driver Paul Cercueil 2017-01-22 14:49 ` Paul Cercueil [not found] ` <20170122144947.16158-5-paul-icTtO2rgO2OTuSrc4Mpeew@public.gmane.org> 2017-01-22 16:21 ` kbuild test robot 2017-01-22 16:21 ` kbuild test robot 2017-01-22 16:21 ` kbuild test robot 2017-01-22 16:21 ` kbuild test robot 2017-01-22 17:49 ` kbuild test robot 2017-01-22 17:49 ` kbuild test robot 2017-01-22 17:49 ` kbuild test robot 2017-01-22 17:49 ` kbuild test robot 2017-01-22 17:49 ` [PATCH] GPIO: fix semicolon.cocci warnings kbuild test robot 2017-01-22 17:49 ` kbuild test robot 2017-01-22 17:49 ` kbuild test robot 2017-01-22 17:49 ` kbuild test robot 2017-01-22 14:49 ` [PATCH v2 05/14] MIPS: ingenic: Enable pinctrl for all ingenic SoCs Paul Cercueil 2017-01-22 14:49 ` Paul Cercueil 2017-01-22 14:49 ` [PATCH v2 06/14] MIPS: jz4740: DTS: Add nodes for ingenic pinctrl and gpio drivers Paul Cercueil 2017-01-22 14:49 ` Paul Cercueil 2017-01-22 14:49 ` [PATCH v2 07/14] MIPS: jz4780: " Paul Cercueil 2017-01-22 14:49 ` Paul Cercueil 2017-01-22 14:49 ` [PATCH v2 09/14] MIPS: JZ4780: CI20: Add pinctrl configuration for several drivers Paul Cercueil 2017-01-22 14:49 ` Paul Cercueil 2017-01-22 14:49 ` [PATCH v2 10/14] mmc: jz4740: Let the pinctrl driver configure the pins Paul Cercueil 2017-01-22 14:49 ` Paul Cercueil 2017-01-23 10:40 ` Ulf Hansson 2017-01-23 10:40 ` Ulf Hansson 2017-01-23 10:40 ` Ulf Hansson 2017-01-22 14:49 ` [PATCH v2 12/14] fbdev: jz4740-fb: " Paul Cercueil 2017-01-22 14:49 ` Paul Cercueil 2017-01-22 14:49 ` [PATCH v2 13/14] pwm: jz4740: " Paul Cercueil 2017-01-22 14:49 ` Paul Cercueil 2017-01-22 14:49 ` [PATCH v2 14/14] MIPS: jz4740: Remove custom GPIO code Paul Cercueil 2017-01-22 14:49 ` Paul Cercueil 2017-01-25 18:51 ` [PATCH v3 00/14] Ingenic JZ4740 / JZ4780 pinctrl driver Paul Cercueil 2017-01-25 18:51 ` Paul Cercueil 2017-01-25 18:51 ` [PATCH v3 01/14] Documentation: dt/bindings: Document pinctrl-ingenic Paul Cercueil 2017-01-25 18:51 ` Paul Cercueil 2017-01-30 20:36 ` Rob Herring 2017-01-30 20:36 ` Rob Herring 2017-01-30 20:36 ` Rob Herring 2017-01-30 20:36 ` Rob Herring 2017-01-31 10:31 ` Paul Cercueil 2017-01-31 10:31 ` Paul Cercueil [not found] ` <12dc62a7255bd453ff4e5e89f93ebc58-p8hskv8pF7lEPksTRSfcJOTW4wlIGRCZ@public.gmane.org> 2017-01-31 13:09 ` Linus Walleij 2017-01-31 13:09 ` Linus Walleij 2017-01-31 13:09 ` Linus Walleij 2017-02-09 17:28 ` Paul Cercueil 2017-02-09 17:28 ` Paul Cercueil [not found] ` <fd3c507484a9ee34a08c9f92e60624db-p8hskv8pF7lEPksTRSfcJOTW4wlIGRCZ@public.gmane.org> 2017-02-20 13:56 ` Linus Walleij 2017-02-20 13:56 ` Linus Walleij 2017-02-20 13:56 ` Linus Walleij 2017-02-21 11:20 ` Paul Cercueil 2017-02-21 11:20 ` Paul Cercueil 2017-02-23 9:59 ` Linus Walleij 2017-02-23 9:59 ` Linus Walleij 2017-02-23 9:59 ` Linus Walleij 2017-04-02 20:42 ` [PATCH v4 00/14] Ingenic JZ4740 / JZ4780 pinctrl driver Paul Cercueil 2017-04-02 20:42 ` Paul Cercueil 2017-04-02 20:42 ` [PATCH v4 01/14] dt/bindings: Document pinctrl-ingenic Paul Cercueil 2017-04-02 20:42 ` Paul Cercueil 2017-04-04 14:48 ` Rob Herring 2017-04-04 14:48 ` Rob Herring 2017-04-28 20:08 ` [PATCH v4 00/14] Ingenic JZ4740 / JZ4780 pinctrl driver Paul Cercueil 2017-04-28 20:08 ` Paul Cercueil 2017-04-28 20:08 ` [PATCH v5 02/14] dt/bindings: Document gpio-ingenic Paul Cercueil 2017-04-28 20:08 ` Paul Cercueil 2017-05-05 19:57 ` Rob Herring 2017-05-05 19:57 ` Rob Herring 2017-04-28 20:08 ` [PATCH v5 07/14] MIPS: jz4780: DTS: Add nodes for ingenic pinctrl and gpio drivers Paul Cercueil 2017-04-28 20:08 ` Paul Cercueil 2017-04-28 20:08 ` [PATCH v5 08/14] MIPS: JZ4740: Qi LB60: Add pinctrl configuration for several drivers Paul Cercueil 2017-04-28 20:08 ` Paul Cercueil [not found] ` <20170428200824.10906-1-paul-icTtO2rgO2OTuSrc4Mpeew@public.gmane.org> 2017-04-28 20:08 ` [PATCH v5 01/14] dt/bindings: Document pinctrl-ingenic Paul Cercueil 2017-04-28 20:08 ` Paul Cercueil 2017-04-28 20:08 ` Paul Cercueil [not found] ` <20170428200824.10906-2-paul-icTtO2rgO2OTuSrc4Mpeew@public.gmane.org> 2017-05-12 16:52 ` [PATCH v6 " Paul Cercueil 2017-05-12 16:52 ` Paul Cercueil 2017-05-12 16:52 ` [PATCH v6 02/14] dt/bindings: Document gpio-ingenic Paul Cercueil 2017-05-12 16:52 ` [PATCH v6 03/14] pinctrl: add a pinctrl driver for the Ingenic jz47xx SoCs Paul Cercueil [not found] ` <20170512165307.31369-1-paul-icTtO2rgO2OTuSrc4Mpeew@public.gmane.org> 2017-05-12 16:52 ` [PATCH v6 04/14] GPIO: Add gpio-ingenic driver Paul Cercueil 2017-05-12 16:52 ` Paul Cercueil 2017-05-12 16:52 ` [PATCH v6 05/14] MIPS: ingenic: Enable pinctrl for all ingenic SoCs Paul Cercueil 2017-05-12 16:52 ` [PATCH v6 06/14] MIPS: jz4740: DTS: Add nodes for ingenic pinctrl and gpio drivers Paul Cercueil 2017-05-12 16:53 ` [PATCH v6 07/14] MIPS: jz4780: " Paul Cercueil 2017-05-12 16:53 ` [PATCH v6 08/14] MIPS: JZ4740: Qi LB60: Add pinctrl configuration for several drivers Paul Cercueil 2017-05-12 16:53 ` [PATCH v6 09/14] MIPS: JZ4780: CI20: " Paul Cercueil 2017-05-12 16:53 ` [PATCH v6 10/14] mmc: jz4740: Let the pinctrl driver configure the pins Paul Cercueil 2017-05-12 16:53 ` [PATCH v6 11/14] mtd: nand: " Paul Cercueil 2017-05-12 16:53 ` [PATCH v6 12/14] fbdev: jz4740-fb: " Paul Cercueil 2017-05-12 16:53 ` [PATCH v6 13/14] pwm: jz4740: " Paul Cercueil 2017-05-12 16:53 ` [PATCH v6 14/14] MIPS: jz4740: Remove custom GPIO code Paul Cercueil 2017-04-28 20:08 ` [PATCH v5 03/14] pinctrl: add a pinctrl driver for the Ingenic jz47xx SoCs Paul Cercueil 2017-04-28 20:08 ` Paul Cercueil 2017-04-28 20:08 ` Paul Cercueil 2017-05-03 9:12 ` Paul Cercueil 2017-05-03 9:12 ` Paul Cercueil 2017-05-11 11:01 ` Linus Walleij 2017-05-11 11:01 ` Linus Walleij 2017-05-11 11:01 ` Linus Walleij 2017-04-28 20:08 ` [PATCH v5 04/14] GPIO: Add gpio-ingenic driver Paul Cercueil 2017-04-28 20:08 ` Paul Cercueil 2017-04-28 20:08 ` Paul Cercueil 2017-05-07 22:05 ` Paul Cercueil 2017-05-07 22:05 ` Paul Cercueil 2017-05-11 11:06 ` Linus Walleij 2017-05-11 11:06 ` Linus Walleij 2017-05-11 11:06 ` Linus Walleij 2017-04-28 20:08 ` [PATCH v5 05/14] MIPS: ingenic: Enable pinctrl for all ingenic SoCs Paul Cercueil 2017-04-28 20:08 ` Paul Cercueil 2017-04-28 20:08 ` Paul Cercueil 2017-05-11 11:08 ` Linus Walleij 2017-05-11 11:08 ` Linus Walleij 2017-05-11 11:08 ` Linus Walleij 2017-05-12 17:00 ` Paul Cercueil 2017-05-12 17:00 ` Paul Cercueil 2017-05-12 17:00 ` Paul Cercueil 2017-05-22 15:31 ` Linus Walleij 2017-05-22 15:31 ` Linus Walleij 2017-05-22 15:31 ` Linus Walleij [not found] ` <CACRpkdauf5c2i4o5i8QY8YHPNjizkvTu6kAbnquWiP_=v2=KdQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org> 2017-07-02 16:35 ` Paul Cercueil 2017-07-02 16:35 ` Paul Cercueil 2017-07-02 16:35 ` Paul Cercueil 2017-07-03 9:07 ` Linus Walleij 2017-07-03 9:07 ` Linus Walleij 2017-07-03 9:07 ` Linus Walleij 2017-07-03 13:55 ` Ralf Baechle 2017-07-03 13:55 ` Ralf Baechle 2017-07-03 13:55 ` Ralf Baechle 2017-07-31 13:29 ` Linus Walleij 2017-07-31 13:29 ` Linus Walleij 2017-07-31 13:29 ` Linus Walleij 2017-04-28 20:08 ` [PATCH v5 06/14] MIPS: jz4740: DTS: Add nodes for ingenic pinctrl and gpio drivers Paul Cercueil 2017-04-28 20:08 ` Paul Cercueil 2017-04-28 20:08 ` Paul Cercueil 2017-04-28 20:08 ` [PATCH v5 09/14] MIPS: JZ4780: CI20: Add pinctrl configuration for several drivers Paul Cercueil 2017-04-28 20:08 ` Paul Cercueil 2017-04-28 20:08 ` Paul Cercueil 2017-04-28 20:08 ` [PATCH v5 11/14] mtd: nand: jz4740: Let the pinctrl driver configure the pins Paul Cercueil 2017-04-28 20:08 ` Paul Cercueil 2017-04-28 20:08 ` Paul Cercueil 2017-04-28 20:08 ` [PATCH v5 10/14] mmc: " Paul Cercueil 2017-04-28 20:08 ` Paul Cercueil 2017-04-28 20:08 ` [PATCH v5 12/14] fbdev: jz4740-fb: " Paul Cercueil 2017-04-28 20:08 ` Paul Cercueil 2017-04-28 20:08 ` [PATCH v5 13/14] pwm: jz4740: " Paul Cercueil 2017-04-28 20:08 ` Paul Cercueil 2017-04-28 20:08 ` [PATCH v5 14/14] MIPS: jz4740: Remove custom GPIO code Paul Cercueil 2017-04-28 20:08 ` Paul Cercueil 2017-04-02 20:42 ` [PATCH v4 02/14] dt/bindings: Document gpio-ingenic Paul Cercueil 2017-04-02 20:42 ` Paul Cercueil 2017-04-04 14:52 ` Rob Herring 2017-04-04 14:52 ` Rob Herring 2017-04-02 20:42 ` [PATCH v4 03/14] pinctrl-ingenic: add a pinctrl driver for the Ingenic jz47xx SoCs Paul Cercueil 2017-04-02 20:42 ` Paul Cercueil 2017-04-07 9:41 ` Linus Walleij 2017-04-07 9:41 ` Linus Walleij 2017-04-07 9:41 ` Linus Walleij 2017-04-07 10:56 ` Lee Jones 2017-04-07 10:56 ` Lee Jones 2017-04-07 10:56 ` Lee Jones 2017-04-02 20:42 ` [PATCH v4 04/14] GPIO: Add gpio-ingenic driver Paul Cercueil 2017-04-02 20:42 ` Paul Cercueil 2017-04-03 14:15 ` kbuild test robot 2017-04-03 14:15 ` kbuild test robot 2017-04-03 14:15 ` kbuild test robot 2017-04-03 14:15 ` kbuild test robot [not found] ` <20170402204244.14216-5-paul-icTtO2rgO2OTuSrc4Mpeew@public.gmane.org> 2017-04-07 9:34 ` Linus Walleij 2017-04-07 9:34 ` Linus Walleij 2017-04-07 9:34 ` Linus Walleij 2017-04-02 20:42 ` [PATCH v4 05/14] MIPS: ingenic: Enable pinctrl for all ingenic SoCs Paul Cercueil 2017-04-02 20:42 ` Paul Cercueil 2017-04-02 20:42 ` [PATCH v4 06/14] MIPS: jz4740: DTS: Add nodes for ingenic pinctrl and gpio drivers Paul Cercueil 2017-04-02 20:42 ` Paul Cercueil 2017-04-03 9:57 ` Sergei Shtylyov 2017-04-03 9:57 ` Sergei Shtylyov [not found] ` <48f7f4ee-b8e3-0096-ddea-2fbe0b399b40-M4DtvfQ/ZS1MRgGoP+s0PdBPR1lH4CV8@public.gmane.org> 2017-04-03 10:20 ` Paul Cercueil 2017-04-03 10:20 ` Paul Cercueil 2017-04-03 10:20 ` Paul Cercueil 2017-04-03 10:32 ` Sergei Shtylyov 2017-04-03 10:32 ` Sergei Shtylyov [not found] ` <20170402204244.14216-7-paul-icTtO2rgO2OTuSrc4Mpeew@public.gmane.org> 2017-04-07 9:44 ` Linus Walleij 2017-04-07 9:44 ` Linus Walleij 2017-04-07 9:44 ` Linus Walleij 2017-04-07 13:57 ` Paul Cercueil 2017-04-07 13:57 ` Paul Cercueil 2017-04-24 12:58 ` Linus Walleij 2017-04-24 12:58 ` Linus Walleij 2017-04-24 12:58 ` Linus Walleij 2017-04-02 20:42 ` [PATCH v4 07/14] MIPS: jz4780: " Paul Cercueil 2017-04-02 20:42 ` Paul Cercueil 2017-04-02 20:42 ` [PATCH v4 08/14] MIPS: JZ4740: Qi LB60: Add pinctrl configuration for several drivers Paul Cercueil 2017-04-02 20:42 ` Paul Cercueil 2017-04-02 20:42 ` [PATCH v4 09/14] MIPS: JZ4780: CI20: " Paul Cercueil 2017-04-02 20:42 ` Paul Cercueil 2017-04-02 20:42 ` [PATCH v4 10/14] mmc: jz4740: Let the pinctrl driver configure the pins Paul Cercueil 2017-04-02 20:42 ` Paul Cercueil 2017-04-02 20:42 ` [PATCH v4 11/14] mtd: nand: " Paul Cercueil 2017-04-02 20:42 ` Paul Cercueil 2017-04-02 20:42 ` [PATCH v4 12/14] fbdev: jz4740-fb: " Paul Cercueil 2017-04-02 20:42 ` Paul Cercueil 2017-04-02 20:42 ` [PATCH v4 13/14] pwm: jz4740: " Paul Cercueil 2017-04-02 20:42 ` Paul Cercueil [not found] ` <20170402204244.14216-14-paul-icTtO2rgO2OTuSrc4Mpeew@public.gmane.org> 2017-04-06 14:40 ` Thierry Reding 2017-04-06 14:40 ` Thierry Reding 2017-04-06 14:40 ` Thierry Reding 2017-04-02 20:42 ` [PATCH v4 14/14] MIPS: jz4740: Remove custom GPIO code Paul Cercueil 2017-04-02 20:42 ` Paul Cercueil 2017-01-25 18:51 ` [PATCH v3 02/14] Documentation: dt/bindings: Document pinctrl-gpio Paul Cercueil 2017-01-25 18:51 ` Paul Cercueil 2017-01-30 20:33 ` Rob Herring 2017-01-30 20:33 ` Rob Herring 2017-01-25 18:51 ` [PATCH v3 03/14] pinctrl-ingenic: add a pinctrl driver for the Ingenic jz47xx SoCs Paul Cercueil 2017-01-25 18:51 ` Paul Cercueil 2017-01-31 14:05 ` Linus Walleij 2017-01-31 14:05 ` Linus Walleij 2017-01-31 14:05 ` Linus Walleij 2017-01-31 14:12 ` Paul Cercueil 2017-01-31 14:12 ` Paul Cercueil 2017-01-25 18:51 ` [PATCH v3 04/14] GPIO: Add gpio-ingenic driver Paul Cercueil 2017-01-25 18:51 ` Paul Cercueil 2017-01-31 14:13 ` Linus Walleij 2017-01-31 14:13 ` Linus Walleij 2017-01-31 14:13 ` Linus Walleij 2017-02-09 17:14 ` Paul Cercueil 2017-02-09 17:14 ` Paul Cercueil 2017-02-12 20:48 ` Linus Walleij 2017-02-12 20:48 ` Linus Walleij 2017-02-12 20:48 ` Linus Walleij 2017-01-31 14:20 ` Linus Walleij 2017-01-31 14:20 ` Linus Walleij 2017-01-31 14:20 ` Linus Walleij 2017-01-31 15:29 ` Paul Cercueil 2017-01-31 15:29 ` Paul Cercueil [not found] ` <699f0c63e95ecdafe6946fdcdbb97a37-p8hskv8pF7lEPksTRSfcJOTW4wlIGRCZ@public.gmane.org> 2017-02-03 13:58 ` Linus Walleij 2017-02-03 13:58 ` Linus Walleij 2017-02-03 13:58 ` Linus Walleij 2017-01-25 18:51 ` [PATCH v3 05/14] MIPS: ingenic: Enable pinctrl for all ingenic SoCs Paul Cercueil 2017-01-25 18:51 ` Paul Cercueil 2017-01-25 18:51 ` [PATCH v3 06/14] MIPS: jz4740: DTS: Add nodes for ingenic pinctrl and gpio drivers Paul Cercueil 2017-01-25 18:51 ` Paul Cercueil 2017-01-31 14:16 ` Linus Walleij 2017-01-31 14:16 ` Linus Walleij 2017-01-31 14:16 ` Linus Walleij 2017-01-25 18:52 ` [PATCH v3 07/14] MIPS: jz4780: " Paul Cercueil 2017-01-25 18:52 ` Paul Cercueil 2017-01-25 18:52 ` [PATCH v3 08/14] MIPS: JZ4740: Qi LB60: Add pinctrl configuration for several drivers Paul Cercueil 2017-01-25 18:52 ` Paul Cercueil 2017-01-25 18:52 ` [PATCH v3 09/14] MIPS: JZ4780: CI20: " Paul Cercueil 2017-01-25 18:52 ` Paul Cercueil 2017-01-25 18:52 ` [PATCH v3 10/14] mmc: jz4740: Let the pinctrl driver configure the pins Paul Cercueil 2017-01-25 18:52 ` Paul Cercueil 2017-01-26 6:11 ` kbuild test robot 2017-01-26 6:11 ` kbuild test robot 2017-01-26 6:11 ` kbuild test robot 2017-01-26 6:11 ` kbuild test robot 2017-01-26 10:10 ` Paul Cercueil 2017-01-26 10:10 ` Paul Cercueil 2017-01-25 18:52 ` [PATCH v3 11/14] mtd: nand: " Paul Cercueil 2017-01-25 18:52 ` Paul Cercueil 2017-01-25 18:52 ` [PATCH v3 12/14] fbdev: jz4740-fb: " Paul Cercueil 2017-01-25 18:52 ` Paul Cercueil 2017-01-30 16:10 ` Bartlomiej Zolnierkiewicz 2017-01-30 16:10 ` Bartlomiej Zolnierkiewicz 2017-01-25 18:52 ` [PATCH v3 13/14] pwm: jz4740: " Paul Cercueil 2017-01-25 18:52 ` Paul Cercueil 2017-01-25 18:52 ` [PATCH v3 14/14] MIPS: jz4740: Remove custom GPIO code Paul Cercueil 2017-01-25 18:52 ` Paul Cercueil 2017-01-19 6:38 ` [PATCH 00/13] Ingenic JZ4740 / JZ4780 pinctrl driver Linus Walleij 2017-01-19 6:38 ` Linus Walleij 2017-01-19 6:38 ` Linus Walleij
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20170117231421.16310-10-paul@crapouillou.net \ --to=paul@crapouillou.net \ --cc=b.zolnierkie@samsung.com \ --cc=boris.brezillon@free-electrons.com \ --cc=devicetree@vger.kernel.org \ --cc=james.hogan@imgtec.com \ --cc=lars@metafoo.de \ --cc=linus.walleij@linaro.org \ --cc=linux-fbdev@vger.kernel.org \ --cc=linux-gpio@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-mips@linux-mips.org \ --cc=linux-mmc@vger.kernel.org \ --cc=linux-mtd@lists.infradead.org \ --cc=linux-pwm@vger.kernel.org \ --cc=maarten@treewalker.org \ --cc=mark.rutland@arm.com \ --cc=paul.burton@imgtec.com \ --cc=ralf@linux-mips.org \ --cc=robh+dt@kernel.org \ --cc=thierry.reding@gmail.com \ --cc=ulf.hansson@linaro.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.