All of lore.kernel.org
 help / color / mirror / Atom feed
From: AdityaXavier <adityaxavier@gmail.com>
To: hauke@hauke-m.de
Cc: zajec5@gmail.com, bcm-kernel-feedback-list@broadcom.com,
	robh+dt@kernel.org, mark.rutland@arm.com, linux@armlinux.org.uk,
	linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, f.fainelli@gmail.com,
	Aditya Xavier <adityaxavier@gmail.com>
Subject: [PATCH] ARM: BCM5301X: Add missing Netgear R8000 LEDs and Keys
Date: Sat, 28 Jan 2017 19:13:45 +0530	[thread overview]
Message-ID: <20170128134345.5465-1-adityaxavier@gmail.com> (raw)

From: Aditya Xavier <adityaxavier@gmail.com>

Added two WAN status LEDs and a GPIO Key for Brightness which were missing.

Signed-off-by: Aditya Xavier <adityaxavier@gmail.com>
---
 arch/arm/boot/dts/bcm4709-netgear-r8000.dts | 22 ++++++++++++++++++++--
 1 file changed, 20 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
index 92f8a72..90d4420 100644
--- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
+++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
@@ -27,18 +27,30 @@
 	leds {
 		compatible = "gpio-leds";
 
-		power0 {
+		power-white {
 			label = "bcm53xx:white:power";
 			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "default-on";
 		};
 
-		power1 {
+		power-amber {
 			label = "bcm53xx:amber:power";
 			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "default-off";
 		};
 
+		wan-white {
+			label = "bcm53xx:white:wan";
+			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+
+		wan-amber {
+			label = "bcm53xx:amber:wan";
+			gpios = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-off";
+		};
+
 		5ghz-1 {
 			label = "bcm53xx:white:5ghz-1";
 			gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>;
@@ -104,6 +116,12 @@
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
 		};
+
+		brightness {
+			label = "Backlight";
+			linux,code = <KEY_BRIGHTNESS_ZERO>;
+			gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>;
+		};
 	};
 };
 
-- 
2.9.3

WARNING: multiple messages have this Message-ID (diff)
From: AdityaXavier <adityaxavier@gmail.com>
To: hauke@hauke-m.de
Cc: mark.rutland@arm.com, devicetree@vger.kernel.org,
	f.fainelli@gmail.com, zajec5@gmail.com, linux@armlinux.org.uk,
	linux-kernel@vger.kernel.org, robh+dt@kernel.org,
	bcm-kernel-feedback-list@broadcom.com,
	Aditya Xavier <adityaxavier@gmail.com>,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH] ARM: BCM5301X: Add missing Netgear R8000 LEDs and Keys
Date: Sat, 28 Jan 2017 19:13:45 +0530	[thread overview]
Message-ID: <20170128134345.5465-1-adityaxavier@gmail.com> (raw)

From: Aditya Xavier <adityaxavier@gmail.com>

Added two WAN status LEDs and a GPIO Key for Brightness which were missing.

Signed-off-by: Aditya Xavier <adityaxavier@gmail.com>
---
 arch/arm/boot/dts/bcm4709-netgear-r8000.dts | 22 ++++++++++++++++++++--
 1 file changed, 20 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
index 92f8a72..90d4420 100644
--- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
+++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
@@ -27,18 +27,30 @@
 	leds {
 		compatible = "gpio-leds";
 
-		power0 {
+		power-white {
 			label = "bcm53xx:white:power";
 			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "default-on";
 		};
 
-		power1 {
+		power-amber {
 			label = "bcm53xx:amber:power";
 			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "default-off";
 		};
 
+		wan-white {
+			label = "bcm53xx:white:wan";
+			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+
+		wan-amber {
+			label = "bcm53xx:amber:wan";
+			gpios = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-off";
+		};
+
 		5ghz-1 {
 			label = "bcm53xx:white:5ghz-1";
 			gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>;
@@ -104,6 +116,12 @@
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
 		};
+
+		brightness {
+			label = "Backlight";
+			linux,code = <KEY_BRIGHTNESS_ZERO>;
+			gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>;
+		};
 	};
 };
 
-- 
2.9.3

WARNING: multiple messages have this Message-ID (diff)
From: adityaxavier@gmail.com (AdityaXavier)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] ARM: BCM5301X: Add missing Netgear R8000 LEDs and Keys
Date: Sat, 28 Jan 2017 19:13:45 +0530	[thread overview]
Message-ID: <20170128134345.5465-1-adityaxavier@gmail.com> (raw)

From: Aditya Xavier <adityaxavier@gmail.com>

Added two WAN status LEDs and a GPIO Key for Brightness which were missing.

Signed-off-by: Aditya Xavier <adityaxavier@gmail.com>
---
 arch/arm/boot/dts/bcm4709-netgear-r8000.dts | 22 ++++++++++++++++++++--
 1 file changed, 20 insertions(+), 2 deletions(-)

diff --git a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
index 92f8a72..90d4420 100644
--- a/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
+++ b/arch/arm/boot/dts/bcm4709-netgear-r8000.dts
@@ -27,18 +27,30 @@
 	leds {
 		compatible = "gpio-leds";
 
-		power0 {
+		power-white {
 			label = "bcm53xx:white:power";
 			gpios = <&chipcommon 2 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "default-on";
 		};
 
-		power1 {
+		power-amber {
 			label = "bcm53xx:amber:power";
 			gpios = <&chipcommon 3 GPIO_ACTIVE_LOW>;
 			linux,default-trigger = "default-off";
 		};
 
+		wan-white {
+			label = "bcm53xx:white:wan";
+			gpios = <&chipcommon 8 GPIO_ACTIVE_LOW>;
+			linux,default-trigger = "default-on";
+		};
+
+		wan-amber {
+			label = "bcm53xx:amber:wan";
+			gpios = <&chipcommon 9 GPIO_ACTIVE_HIGH>;
+			linux,default-trigger = "default-off";
+		};
+
 		5ghz-1 {
 			label = "bcm53xx:white:5ghz-1";
 			gpios = <&chipcommon 12 GPIO_ACTIVE_LOW>;
@@ -104,6 +116,12 @@
 			linux,code = <KEY_RESTART>;
 			gpios = <&chipcommon 6 GPIO_ACTIVE_LOW>;
 		};
+
+		brightness {
+			label = "Backlight";
+			linux,code = <KEY_BRIGHTNESS_ZERO>;
+			gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>;
+		};
 	};
 };
 
-- 
2.9.3

             reply	other threads:[~2017-01-28 13:53 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-01-28 13:43 AdityaXavier [this message]
2017-01-28 13:43 ` [PATCH] ARM: BCM5301X: Add missing Netgear R8000 LEDs and Keys AdityaXavier
2017-01-28 13:43 ` AdityaXavier
2017-01-28 14:25 ` Rafał Miłecki
2017-01-28 14:25   ` Rafał Miłecki
2017-01-28 14:25   ` Rafał Miłecki

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170128134345.5465-1-adityaxavier@gmail.com \
    --to=adityaxavier@gmail.com \
    --cc=bcm-kernel-feedback-list@broadcom.com \
    --cc=devicetree@vger.kernel.org \
    --cc=f.fainelli@gmail.com \
    --cc=hauke@hauke-m.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    --cc=mark.rutland@arm.com \
    --cc=robh+dt@kernel.org \
    --cc=zajec5@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.