From: Vignesh R <vigneshr@ti.com> To: David Woodhouse <dwmw2@infradead.org>, Brian Norris <computersforpeace@gmail.com>, Boris Brezillon <boris.brezillon@free-electrons.com>, Marek Vasut <marek.vasut@gmail.com>, Richard Weinberger <richard@nod.at>, Cyrille Pitchen <cyrille.pitchen@atmel.com> Cc: <linux-mtd@lists.infradead.org>, <linux-kernel@vger.kernel.org>, <linux-omap@vger.kernel.org>, Vignesh R <vigneshr@ti.com>, Frode Isaksen <fisaksen@baylibre.com>, <linux-spi@vger.kernel.org> Subject: [RFC PATCH 2/2] mtd: devices: m25p80: Enable spi-nor bounce buffer support Date: Mon, 27 Feb 2017 17:38:39 +0530 [thread overview] Message-ID: <20170227120839.16545-3-vigneshr@ti.com> (raw) In-Reply-To: <20170227120839.16545-1-vigneshr@ti.com> Many SPI controller drivers use DMA to read/write from m25p80 compatible flashes. Therefore enable bounce buffers support provided by spi-nor framework to take care of handling vmalloc'd buffers which may not be DMA'able. Signed-off-by: Vignesh R <vigneshr@ti.com> --- drivers/mtd/devices/m25p80.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c index c4df3b1bded0..d05acf22eadf 100644 --- a/drivers/mtd/devices/m25p80.c +++ b/drivers/mtd/devices/m25p80.c @@ -241,6 +241,7 @@ static int m25p_probe(struct spi_device *spi) else flash_name = spi->modalias; + nor->flags |= SNOR_F_USE_BOUNCE_BUFFER; ret = spi_nor_scan(nor, flash_name, mode); if (ret) return ret; -- 2.11.0
WARNING: multiple messages have this Message-ID (diff)
From: Vignesh R <vigneshr@ti.com> To: David Woodhouse <dwmw2@infradead.org>, Brian Norris <computersforpeace@gmail.com>, Boris Brezillon <boris.brezillon@free-electrons.com>, Marek Vasut <marek.vasut@gmail.com>, Richard Weinberger <richard@nod.at>, Cyrille Pitchen <cyrille.pitchen@atmel.com> Cc: Frode Isaksen <fisaksen@baylibre.com>, Vignesh R <vigneshr@ti.com>, linux-kernel@vger.kernel.org, linux-spi@vger.kernel.org, linux-mtd@lists.infradead.org, linux-omap@vger.kernel.org Subject: [RFC PATCH 2/2] mtd: devices: m25p80: Enable spi-nor bounce buffer support Date: Mon, 27 Feb 2017 17:38:39 +0530 [thread overview] Message-ID: <20170227120839.16545-3-vigneshr@ti.com> (raw) In-Reply-To: <20170227120839.16545-1-vigneshr@ti.com> Many SPI controller drivers use DMA to read/write from m25p80 compatible flashes. Therefore enable bounce buffers support provided by spi-nor framework to take care of handling vmalloc'd buffers which may not be DMA'able. Signed-off-by: Vignesh R <vigneshr@ti.com> --- drivers/mtd/devices/m25p80.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c index c4df3b1bded0..d05acf22eadf 100644 --- a/drivers/mtd/devices/m25p80.c +++ b/drivers/mtd/devices/m25p80.c @@ -241,6 +241,7 @@ static int m25p_probe(struct spi_device *spi) else flash_name = spi->modalias; + nor->flags |= SNOR_F_USE_BOUNCE_BUFFER; ret = spi_nor_scan(nor, flash_name, mode); if (ret) return ret; -- 2.11.0 ______________________________________________________ Linux MTD discussion mailing list http://lists.infradead.org/mailman/listinfo/linux-mtd/
next prev parent reply other threads:[~2017-02-27 12:14 UTC|newest] Thread overview: 70+ messages / expand[flat|nested] mbox.gz Atom feed top 2017-02-27 12:08 [RFC PATCH 0/2] mtd: spi-nor: Handle vmalloc'd buffers Vignesh R 2017-02-27 12:08 ` Vignesh R 2017-02-27 12:08 ` [RFC PATCH 1/2] mtd: spi-nor: Introduce bounce buffer to handle " Vignesh R 2017-02-27 12:08 ` Vignesh R 2017-02-28 21:39 ` Richard Weinberger 2017-02-28 21:39 ` Richard Weinberger 2017-03-01 5:13 ` Vignesh R 2017-03-01 5:13 ` Vignesh R 2017-03-01 10:09 ` Cyrille Pitchen 2017-03-01 10:09 ` Cyrille Pitchen 2017-03-01 10:18 ` Boris Brezillon 2017-03-01 10:18 ` Boris Brezillon 2017-03-01 11:18 ` Frode Isaksen 2017-03-01 11:18 ` Frode Isaksen 2017-03-01 12:12 ` Boris Brezillon 2017-03-01 12:12 ` Boris Brezillon 2017-03-01 11:50 ` Vignesh R 2017-03-01 11:50 ` Vignesh R 2017-02-27 12:08 ` Vignesh R [this message] 2017-02-27 12:08 ` [RFC PATCH 2/2] mtd: devices: m25p80: Enable spi-nor bounce buffer support Vignesh R 2017-02-28 21:41 ` Richard Weinberger 2017-03-01 4:54 ` Vignesh R 2017-03-01 4:54 ` Vignesh R 2017-03-01 10:43 ` Cyrille Pitchen 2017-03-01 10:43 ` Cyrille Pitchen 2017-03-01 11:14 ` Frode Isaksen 2017-03-01 11:14 ` Frode Isaksen 2017-03-01 11:46 ` Vignesh R 2017-03-01 11:46 ` Vignesh R 2017-03-01 11:46 ` Vignesh R 2017-03-01 12:23 ` Boris Brezillon 2017-03-01 12:23 ` Boris Brezillon 2017-03-01 14:21 ` Cyrille Pitchen 2017-03-01 14:21 ` Cyrille Pitchen 2017-03-01 14:28 ` Boris Brezillon 2017-03-01 14:28 ` Boris Brezillon 2017-03-01 14:28 ` Boris Brezillon 2017-03-01 14:30 ` Cyrille Pitchen 2017-03-01 14:30 ` Cyrille Pitchen 2017-03-01 14:30 ` Cyrille Pitchen 2017-03-01 15:52 ` Mark Brown 2017-03-01 16:04 ` Boris Brezillon 2017-03-01 16:04 ` Boris Brezillon 2017-03-01 16:55 ` Boris Brezillon 2017-03-01 16:55 ` Boris Brezillon 2017-03-02 9:06 ` Frode Isaksen 2017-03-02 9:06 ` Frode Isaksen 2017-03-02 13:54 ` Vignesh R 2017-03-02 13:54 ` Vignesh R 2017-03-02 14:29 ` Boris Brezillon 2017-03-02 14:29 ` Boris Brezillon 2017-03-02 15:03 ` Frode Isaksen 2017-03-02 15:03 ` Frode Isaksen 2017-03-02 15:25 ` Boris Brezillon 2017-03-02 15:25 ` Boris Brezillon 2017-03-03 9:02 ` Frode Isaksen 2017-03-03 9:02 ` Frode Isaksen 2017-03-02 16:45 ` Cyrille Pitchen 2017-03-02 16:45 ` Cyrille Pitchen 2017-03-02 17:00 ` Mark Brown 2017-03-02 17:00 ` Mark Brown 2017-03-02 19:49 ` Boris Brezillon 2017-03-02 19:49 ` Boris Brezillon 2017-03-03 12:50 ` Mark Brown 2017-03-03 12:50 ` Mark Brown 2017-03-06 11:47 ` Vignesh R 2017-03-06 11:47 ` Vignesh R 2017-03-14 13:21 ` Vignesh R 2017-02-27 14:03 ` [RFC PATCH 0/2] mtd: spi-nor: Handle vmalloc'd buffers Frode Isaksen 2017-02-27 14:03 ` Frode Isaksen
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20170227120839.16545-3-vigneshr@ti.com \ --to=vigneshr@ti.com \ --cc=boris.brezillon@free-electrons.com \ --cc=computersforpeace@gmail.com \ --cc=cyrille.pitchen@atmel.com \ --cc=dwmw2@infradead.org \ --cc=fisaksen@baylibre.com \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-mtd@lists.infradead.org \ --cc=linux-omap@vger.kernel.org \ --cc=linux-spi@vger.kernel.org \ --cc=marek.vasut@gmail.com \ --cc=richard@nod.at \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.