All of lore.kernel.org
 help / color / mirror / Atom feed
From: Romain Perier <romain.perier-ZGY8ohtN/8qB+jHODAdFcQ@public.gmane.org>
To: Liam Girdwood <lgirdwood-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
	Mark Brown <broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
	Jaroslav Kysela <perex-/Fr2/VpizcU@public.gmane.org>,
	Takashi Iwai <tiwai-IBi9RG/b67k@public.gmane.org>,
	alsa-devel-K7yf7f+aM1XWsZ/bQMPhNw@public.gmane.org,
	Heiko Stuebner <heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org>
Cc: Romain Perier
	<romain.perier-ZGY8ohtN/8qB+jHODAdFcQ@public.gmane.org>,
	linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
	Sjoerd Simons
	<sjoerd.simons-ZGY8ohtN/8pPYcu2f3hruQ@public.gmane.org>
Subject: [PATCH RESEND 2/4] ASoC: es8328: Let device auto detect ratios in slave mode
Date: Wed,  1 Mar 2017 10:11:05 +0100	[thread overview]
Message-ID: <20170301091107.10578-3-romain.perier@collabora.com> (raw)
In-Reply-To: <20170301091107.10578-1-romain.perier-ZGY8ohtN/8qB+jHODAdFcQ@public.gmane.org>

In master mode, SCLK and LRCLK signals are generated by the CODEC when
any of the ADC/DAC are enabled. SCLK is derived from MCLK via a
programmable division set by BLK_DIV, LRCLK is derived from MCLK via
another programmable division set by ADCFsRatio/DACFsRatio.

In slave mode, SCLK and LRCLK signals are received as inputs and
supplied externally. LRCLK and SCLK must be synchronously derived from
MCLK with specific rates. The device can auto detect MCLK/LRCLK ratio
according to a predefined table. LRCLK/SCLK ratio is usually 64 (SCLK =
64 * LRCLK)

This commits adds support to let to device auto detect and decide which
ratio to use. The mclkdiv2 and BCLK_DIV ratio and put to zero.

Signed-off-by: Romain Perier <romain.perier-ZGY8ohtN/8qB+jHODAdFcQ@public.gmane.org>
---
 sound/soc/codecs/es8328.c | 39 +++++++++++++++++++++++++--------------
 1 file changed, 25 insertions(+), 14 deletions(-)

diff --git a/sound/soc/codecs/es8328.c b/sound/soc/codecs/es8328.c
index 5ad7161..1363a68 100644
--- a/sound/soc/codecs/es8328.c
+++ b/sound/soc/codecs/es8328.c
@@ -86,6 +86,7 @@ struct es8328_priv {
 	int mclkdiv2;
 	const struct snd_pcm_hw_constraint_list *sysclk_constraints;
 	const int *mclk_ratios;
+	bool master;
 	struct regulator_bulk_data supplies[ES8328_SUPPLY_NUM];
 };
 
@@ -464,7 +465,7 @@ static int es8328_startup(struct snd_pcm_substream *substream,
 	struct snd_soc_codec *codec = dai->codec;
 	struct es8328_priv *es8328 = snd_soc_codec_get_drvdata(codec);
 
-	if (es8328->sysclk_constraints)
+	if (es8328->master && es8328->sysclk_constraints)
 		snd_pcm_hw_constraint_list(substream->runtime, 0,
 				SNDRV_PCM_HW_PARAM_RATE,
 				es8328->sysclk_constraints);
@@ -483,27 +484,34 @@ static int es8328_hw_params(struct snd_pcm_substream *substream,
 	int wl;
 	int ratio;
 
-	if (!es8328->sysclk_constraints) {
-		dev_err(codec->dev, "No MCLK configured\n");
-		return -EINVAL;
-	}
-
 	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
 		reg = ES8328_DACCONTROL2;
 	else
 		reg = ES8328_ADCCONTROL5;
 
-	for (i = 0; i < es8328->sysclk_constraints->count; i++)
-		if (es8328->sysclk_constraints->list[i] == params_rate(params))
-			break;
+	if (es8328->master) {
+		if (!es8328->sysclk_constraints) {
+			dev_err(codec->dev, "No MCLK configured\n");
+			return -EINVAL;
+		}
 
-	if (i == es8328->sysclk_constraints->count) {
-		dev_err(codec->dev, "LRCLK %d unsupported with current clock\n",
-			params_rate(params));
-		return -EINVAL;
+		for (i = 0; i < es8328->sysclk_constraints->count; i++)
+			if (es8328->sysclk_constraints->list[i] ==
+			    params_rate(params))
+				break;
+
+		if (i == es8328->sysclk_constraints->count) {
+			dev_err(codec->dev,
+				"LRCLK %d unsupported with current clock\n",
+				params_rate(params));
+			return -EINVAL;
+		}
+		ratio = es8328->mclk_ratios[i];
+	} else {
+		ratio = 0;
+		es8328->mclkdiv2 = 0;
 	}
 
-	ratio = es8328->mclk_ratios[i];
 	snd_soc_update_bits(codec, ES8328_MASTERMODE,
 			ES8328_MASTERMODE_MCLKDIV2,
 			es8328->mclkdiv2 ? ES8328_MASTERMODE_MCLKDIV2 : 0);
@@ -581,6 +589,7 @@ static int es8328_set_dai_fmt(struct snd_soc_dai *codec_dai,
 		unsigned int fmt)
 {
 	struct snd_soc_codec *codec = codec_dai->codec;
+	struct es8328_priv *es8328 = snd_soc_codec_get_drvdata(codec);
 	u8 dac_mode = 0;
 	u8 adc_mode = 0;
 
@@ -590,11 +599,13 @@ static int es8328_set_dai_fmt(struct snd_soc_dai *codec_dai,
 		snd_soc_update_bits(codec, ES8328_MASTERMODE,
 				    ES8328_MASTERMODE_MSC,
 				    ES8328_MASTERMODE_MSC);
+		es8328->master = true;
 		break;
 	case SND_SOC_DAIFMT_CBS_CFS:
 		/* Slave serial port mode */
 		snd_soc_update_bits(codec, ES8328_MASTERMODE,
 				    ES8328_MASTERMODE_MSC, 0);
+		es8328->master = false;
 		break;
 	default:
 		return -EINVAL;
-- 
2.9.3

  parent reply	other threads:[~2017-03-01  9:11 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-03-01  9:11 [PATCH RESEND 0/4] ASoC: es8328: various improvements Romain Perier
2017-03-01  9:11 ` [PATCH RESEND 1/4] ASoC: es8328: Simplify rates definition Romain Perier
     [not found] ` <20170301091107.10578-1-romain.perier-ZGY8ohtN/8qB+jHODAdFcQ@public.gmane.org>
2017-03-01  9:11   ` Romain Perier [this message]
2017-03-01  9:11   ` [PATCH RESEND 3/4] ASoC: es8328: Enabling support for 192k Romain Perier
2017-03-01  9:11   ` [PATCH RESEND 4/4] ASoC: rockchip: Enable 192khz in hw_params operation Romain Perier

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170301091107.10578-3-romain.perier@collabora.com \
    --to=romain.perier-zgy8ohtn/8qb+jhodadfcq@public.gmane.org \
    --cc=alsa-devel-K7yf7f+aM1XWsZ/bQMPhNw@public.gmane.org \
    --cc=broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
    --cc=heiko-4mtYJXux2i+zQB+pC5nmwQ@public.gmane.org \
    --cc=lgirdwood-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org \
    --cc=linux-rockchip-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
    --cc=perex-/Fr2/VpizcU@public.gmane.org \
    --cc=sjoerd.simons-ZGY8ohtN/8pPYcu2f3hruQ@public.gmane.org \
    --cc=tiwai-IBi9RG/b67k@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.