From: Robin van der Gracht <robin@protonic.nl> To: Shawn Guo <shawnguo@kernel.org> Cc: Sascha Hauer <kernel@pengutronix.de>, Fabio Estevam <fabio.estevam@nxp.com>, Michael Turquette <mturquette@baylibre.com>, Stephen Boyd <sboyd@codeaurora.org>, linux-arm-kernel@lists.infradead.org, linux-clk@vger.kernel.org, linux-kernel@vger.kernel.org, Robin van der Gracht <robin@protonic.nl> Subject: [PATCH v2] clk: imx: clk-imxul: The i.mx6ul has no aips_tz3 clock Date: Fri, 3 Mar 2017 15:10:42 +0100 [thread overview] Message-ID: <20170303141042.17120-1-robin@protonic.nl> (raw) The clock was mapped on CG15 (gpio2_clocks) in the CCRG0 register. Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Robin van der Gracht <robin@protonic.nl> --- drivers/clk/imx/clk-imx6ul.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/clk/imx/clk-imx6ul.c b/drivers/clk/imx/clk-imx6ul.c index 75c35fb..dbd6e59 100644 --- a/drivers/clk/imx/clk-imx6ul.c +++ b/drivers/clk/imx/clk-imx6ul.c @@ -73,7 +73,7 @@ static struct clk *clks[IMX6UL_CLK_END]; static struct clk_onecell_data clk_data; static int const clks_init_on[] __initconst = { - IMX6UL_CLK_AIPSTZ1, IMX6UL_CLK_AIPSTZ2, IMX6UL_CLK_AIPSTZ3, + IMX6UL_CLK_AIPSTZ1, IMX6UL_CLK_AIPSTZ2, IMX6UL_CLK_AXI, IMX6UL_CLK_ARM, IMX6UL_CLK_ROM, IMX6UL_CLK_MMDC_P0_FAST, IMX6UL_CLK_MMDC_P0_IPG, }; @@ -341,9 +341,7 @@ static void __init imx6ul_clocks_init(struct device_node *ccm_node) clks[IMX6UL_CLK_GPT2_SERIAL] = imx_clk_gate2("gpt2_serial", "perclk", base + 0x68, 26); clks[IMX6UL_CLK_UART2_IPG] = imx_clk_gate2("uart2_ipg", "ipg", base + 0x68, 28); clks[IMX6UL_CLK_UART2_SERIAL] = imx_clk_gate2("uart2_serial", "uart_podf", base + 0x68, 28); - if (clk_on_imx6ul()) - clks[IMX6UL_CLK_AIPSTZ3] = imx_clk_gate2("aips_tz3", "ahb", base + 0x68, 30); - else if (clk_on_imx6ull()) + if (clk_on_imx6ull()) clks[IMX6UL_CLK_AIPSTZ3] = imx_clk_gate2("aips_tz3", "ahb", base + 0x80, 18); /* CCGR1 */ @@ -482,6 +480,9 @@ static void __init imx6ul_clocks_init(struct device_node *ccm_node) for (i = 0; i < ARRAY_SIZE(clks_init_on); i++) clk_prepare_enable(clks[clks_init_on[i]]); + if (clk_on_imx6ull()) + clk_prepare_enable(clks[IMX6UL_CLK_AIPSTZ3]); + if (IS_ENABLED(CONFIG_USB_MXS_PHY)) { clk_prepare_enable(clks[IMX6UL_CLK_USBPHY1_GATE]); clk_prepare_enable(clks[IMX6UL_CLK_USBPHY2_GATE]); -- 2.9.3
WARNING: multiple messages have this Message-ID (diff)
From: robin@protonic.nl (Robin van der Gracht) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH v2] clk: imx: clk-imxul: The i.mx6ul has no aips_tz3 clock Date: Fri, 3 Mar 2017 15:10:42 +0100 [thread overview] Message-ID: <20170303141042.17120-1-robin@protonic.nl> (raw) The clock was mapped on CG15 (gpio2_clocks) in the CCRG0 register. Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com> Signed-off-by: Robin van der Gracht <robin@protonic.nl> --- drivers/clk/imx/clk-imx6ul.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/clk/imx/clk-imx6ul.c b/drivers/clk/imx/clk-imx6ul.c index 75c35fb..dbd6e59 100644 --- a/drivers/clk/imx/clk-imx6ul.c +++ b/drivers/clk/imx/clk-imx6ul.c @@ -73,7 +73,7 @@ static struct clk *clks[IMX6UL_CLK_END]; static struct clk_onecell_data clk_data; static int const clks_init_on[] __initconst = { - IMX6UL_CLK_AIPSTZ1, IMX6UL_CLK_AIPSTZ2, IMX6UL_CLK_AIPSTZ3, + IMX6UL_CLK_AIPSTZ1, IMX6UL_CLK_AIPSTZ2, IMX6UL_CLK_AXI, IMX6UL_CLK_ARM, IMX6UL_CLK_ROM, IMX6UL_CLK_MMDC_P0_FAST, IMX6UL_CLK_MMDC_P0_IPG, }; @@ -341,9 +341,7 @@ static void __init imx6ul_clocks_init(struct device_node *ccm_node) clks[IMX6UL_CLK_GPT2_SERIAL] = imx_clk_gate2("gpt2_serial", "perclk", base + 0x68, 26); clks[IMX6UL_CLK_UART2_IPG] = imx_clk_gate2("uart2_ipg", "ipg", base + 0x68, 28); clks[IMX6UL_CLK_UART2_SERIAL] = imx_clk_gate2("uart2_serial", "uart_podf", base + 0x68, 28); - if (clk_on_imx6ul()) - clks[IMX6UL_CLK_AIPSTZ3] = imx_clk_gate2("aips_tz3", "ahb", base + 0x68, 30); - else if (clk_on_imx6ull()) + if (clk_on_imx6ull()) clks[IMX6UL_CLK_AIPSTZ3] = imx_clk_gate2("aips_tz3", "ahb", base + 0x80, 18); /* CCGR1 */ @@ -482,6 +480,9 @@ static void __init imx6ul_clocks_init(struct device_node *ccm_node) for (i = 0; i < ARRAY_SIZE(clks_init_on); i++) clk_prepare_enable(clks[clks_init_on[i]]); + if (clk_on_imx6ull()) + clk_prepare_enable(clks[IMX6UL_CLK_AIPSTZ3]); + if (IS_ENABLED(CONFIG_USB_MXS_PHY)) { clk_prepare_enable(clks[IMX6UL_CLK_USBPHY1_GATE]); clk_prepare_enable(clks[IMX6UL_CLK_USBPHY2_GATE]); -- 2.9.3
next reply other threads:[~2017-03-03 14:11 UTC|newest] Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top 2017-03-03 14:10 Robin van der Gracht [this message] 2017-03-03 14:10 ` [PATCH v2] clk: imx: clk-imxul: The i.mx6ul has no aips_tz3 clock Robin van der Gracht
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20170303141042.17120-1-robin@protonic.nl \ --to=robin@protonic.nl \ --cc=fabio.estevam@nxp.com \ --cc=kernel@pengutronix.de \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-clk@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=mturquette@baylibre.com \ --cc=sboyd@codeaurora.org \ --cc=shawnguo@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.