All of lore.kernel.org
 help / color / mirror / Atom feed
From: Himanshu Madhani <himanshu.madhani@cavium.com>
To: target-devel@vger.kernel.org, Bart.VanAssche@sandisk.com,
	nab@linux-iscsi.org
Cc: giridhar.malavali@cavium.com, linux-scsi@vger.kernel.org,
	himanshu.madhani@cavium.com
Subject: [PATCH v4 06/14] qla2xxx: Allow relogin to proceed if remote login did not finish
Date: Wed, 15 Mar 2017 09:48:48 -0700	[thread overview]
Message-ID: <20170315164856.17255-7-himanshu.madhani@cavium.com> (raw)
In-Reply-To: <20170315164856.17255-1-himanshu.madhani@cavium.com>

From: Quinn Tran <quinn.tran@cavium.com>

If the remote port have started the login process, then the
PLOGI and PRLI should be back to back. Driver will allow
the remote port to complete the process. For the case where
the remote port decide to back off from sending PRLI, this
local port sets an expiration timer for the PRLI. Once the
expiration time passes, the relogin retry logic is allowed
to go through and perform login with the remote port.

Signed-off-by: Quinn Tran <quinn.tran@qlogic.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
---
 drivers/scsi/qla2xxx/qla_def.h    |  2 ++
 drivers/scsi/qla2xxx/qla_init.c   | 12 ++++++++++--
 drivers/scsi/qla2xxx/qla_isr.c    | 25 +++++++++++++++++++------
 drivers/scsi/qla2xxx/qla_target.c |  1 +
 4 files changed, 32 insertions(+), 8 deletions(-)

diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h
index 8662ef4192db..56cd45fc600a 100644
--- a/drivers/scsi/qla2xxx/qla_def.h
+++ b/drivers/scsi/qla2xxx/qla_def.h
@@ -2300,6 +2300,8 @@ typedef struct fc_port {
 	struct ct_sns_desc ct_desc;
 	enum discovery_state disc_state;
 	enum login_state fw_login_state;
+	unsigned long plogi_nack_done_deadline;
+
 	u32 login_gen, last_login_gen;
 	u32 rscn_gen, last_rscn_gen;
 	u32 chip_reset;
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
index 9f3740c68cc8..a7865a5d556d 100644
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -876,10 +876,14 @@ int qla24xx_fcport_handle_login(struct scsi_qla_host *vha, fc_port_t *fcport)
 	fcport->login_retry--;
 
 	if ((fcport->fw_login_state == DSC_LS_PLOGI_PEND) ||
-	    (fcport->fw_login_state == DSC_LS_PLOGI_COMP) ||
 	    (fcport->fw_login_state == DSC_LS_PRLI_PEND))
 		return 0;
 
+	if (fcport->fw_login_state == DSC_LS_PLOGI_COMP) {
+		if (time_before_eq(jiffies, fcport->plogi_nack_done_deadline))
+			return 0;
+	}
+
 	/* for pure Target Mode. Login will not be initiated */
 	if (vha->host->active_mode == MODE_TARGET)
 		return 0;
@@ -1041,10 +1045,14 @@ void qla24xx_handle_relogin_event(scsi_qla_host_t *vha,
 		fcport->flags);
 
 	if ((fcport->fw_login_state == DSC_LS_PLOGI_PEND) ||
-	    (fcport->fw_login_state == DSC_LS_PLOGI_COMP) ||
 	    (fcport->fw_login_state == DSC_LS_PRLI_PEND))
 		return;
 
+	if (fcport->fw_login_state == DSC_LS_PLOGI_COMP) {
+		if (time_before_eq(jiffies, fcport->plogi_nack_done_deadline))
+			return;
+	}
+
 	if (fcport->flags & FCF_ASYNC_SENT) {
 		fcport->login_retry++;
 		set_bit(RELOGIN_NEEDED, &vha->dpc_flags);
diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c
index 3c66ea29de27..b2c6da752edd 100644
--- a/drivers/scsi/qla2xxx/qla_isr.c
+++ b/drivers/scsi/qla2xxx/qla_isr.c
@@ -1620,9 +1620,9 @@ qla24xx_logio_entry(scsi_qla_host_t *vha, struct req_que *req,
 		QLA_LOGIO_LOGIN_RETRIED : 0;
 	if (logio->entry_status) {
 		ql_log(ql_log_warn, fcport->vha, 0x5034,
-		    "Async-%s error entry - hdl=%x"
+		    "Async-%s error entry - %8phC hdl=%x"
 		    "portid=%02x%02x%02x entry-status=%x.\n",
-		    type, sp->handle, fcport->d_id.b.domain,
+		    type, fcport->port_name, sp->handle, fcport->d_id.b.domain,
 		    fcport->d_id.b.area, fcport->d_id.b.al_pa,
 		    logio->entry_status);
 		ql_dump_buffer(ql_dbg_async + ql_dbg_buffer, vha, 0x504d,
@@ -1633,8 +1633,9 @@ qla24xx_logio_entry(scsi_qla_host_t *vha, struct req_que *req,
 
 	if (le16_to_cpu(logio->comp_status) == CS_COMPLETE) {
 		ql_dbg(ql_dbg_async, fcport->vha, 0x5036,
-		    "Async-%s complete - hdl=%x portid=%02x%02x%02x "
-		    "iop0=%x.\n", type, sp->handle, fcport->d_id.b.domain,
+		    "Async-%s complete - %8phC hdl=%x portid=%02x%02x%02x "
+		    "iop0=%x.\n", type, fcport->port_name, sp->handle,
+		    fcport->d_id.b.domain,
 		    fcport->d_id.b.area, fcport->d_id.b.al_pa,
 		    le32_to_cpu(logio->io_parameter[0]));
 
@@ -1674,6 +1675,17 @@ qla24xx_logio_entry(scsi_qla_host_t *vha, struct req_que *req,
 	case LSC_SCODE_NPORT_USED:
 		data[0] = MBS_LOOP_ID_USED;
 		break;
+	case LSC_SCODE_CMD_FAILED:
+		if (iop[1] == 0x0606) {
+			/*
+			 * PLOGI/PRLI Completed. We must have Recv PLOGI/PRLI,
+			 * Target side acked.
+			 */
+			data[0] = MBS_COMMAND_COMPLETE;
+			goto logio_done;
+		}
+		data[0] = MBS_COMMAND_ERROR;
+		break;
 	case LSC_SCODE_NOXCB:
 		vha->hw->exch_starvation++;
 		if (vha->hw->exch_starvation > 5) {
@@ -1695,8 +1707,9 @@ qla24xx_logio_entry(scsi_qla_host_t *vha, struct req_que *req,
 	}
 
 	ql_dbg(ql_dbg_async, fcport->vha, 0x5037,
-	    "Async-%s failed - hdl=%x portid=%02x%02x%02x comp=%x "
-	    "iop0=%x iop1=%x.\n", type, sp->handle, fcport->d_id.b.domain,
+	    "Async-%s failed - %8phC hdl=%x portid=%02x%02x%02x comp=%x "
+	    "iop0=%x iop1=%x.\n", type, fcport->port_name,
+		sp->handle, fcport->d_id.b.domain,
 	    fcport->d_id.b.area, fcport->d_id.b.al_pa,
 	    le16_to_cpu(logio->comp_status),
 	    le32_to_cpu(logio->io_parameter[0]),
diff --git a/drivers/scsi/qla2xxx/qla_target.c b/drivers/scsi/qla2xxx/qla_target.c
index 989f931af156..925d9b858b24 100644
--- a/drivers/scsi/qla2xxx/qla_target.c
+++ b/drivers/scsi/qla2xxx/qla_target.c
@@ -562,6 +562,7 @@ void qla2x00_async_nack_sp_done(void *s, int res)
 		sp->fcport->login_gen++;
 		sp->fcport->fw_login_state = DSC_LS_PLOGI_COMP;
 		sp->fcport->logout_on_delete = 1;
+		sp->fcport->plogi_nack_done_deadline = jiffies + HZ;
 		break;
 
 	case SRB_NACK_PRLI:
-- 
2.12.0

  parent reply	other threads:[~2017-03-15 16:48 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-03-15 16:48 [PATCH v4 00/14] qla2xxx: Bug Fixes and updates for target Himanshu Madhani
2017-03-15 16:48 ` [PATCH v4 01/14] qla2xxx: Allow vref count to timeout on vport delete Himanshu Madhani
2017-03-15 16:48 ` [PATCH v4 02/14] qla2xxx: Fix memory leak for abts processing Himanshu Madhani
2017-03-15 16:48 ` [PATCH v4 03/14] qla2xxx: Fix request queue corruption Himanshu Madhani
2017-03-15 16:48 ` [PATCH v4 04/14] qla2xxx: Fix inadequate lock protection for ABTS Himanshu Madhani
2017-03-15 16:48 ` [PATCH v4 05/14] qla2xxx: Fix sess_lock & hardware_lock lock order problem Himanshu Madhani
2017-03-15 16:48 ` Himanshu Madhani [this message]
2017-03-15 16:48 ` [PATCH v4 07/14] qla2xxx: Improve T10-DIF/PI handling in driver Himanshu Madhani
2017-03-15 16:48 ` [PATCH v4 08/14] qla2xxx: Export DIF stats via debugfs Himanshu Madhani
2017-03-15 16:48 ` [PATCH v4 09/14] qla2xxx: Add async new target notification Himanshu Madhani
2017-03-15 16:48 ` [PATCH v4 10/14] qla2xxx: Use IOCB interface to submit non-critical MBX Himanshu Madhani
2017-03-15 16:48 ` [PATCH v4 11/14] qla2xxx: Add DebugFS node to display Port Database Himanshu Madhani
2017-03-15 16:48 ` [PATCH v4 12/14] qla2xxx: Change scsi host lookup method Himanshu Madhani
2017-03-15 16:48 ` [PATCH v4 13/14] qla2xxx: Fix delayed response to command for loop mode/direct connect Himanshu Madhani
2017-03-15 16:48 ` [PATCH v4 14/14] qla2xxx: Update driver version to 9.00.00.00-k Himanshu Madhani
2017-03-19  0:32 ` [PATCH v4 00/14] qla2xxx: Bug Fixes and updates for target Nicholas A. Bellinger

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170315164856.17255-7-himanshu.madhani@cavium.com \
    --to=himanshu.madhani@cavium.com \
    --cc=Bart.VanAssche@sandisk.com \
    --cc=giridhar.malavali@cavium.com \
    --cc=linux-scsi@vger.kernel.org \
    --cc=nab@linux-iscsi.org \
    --cc=target-devel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.