From: Jerome Brunet <jbrunet@baylibre.com>
To: Linus Walleij <linus.walleij@linaro.org>,
Carlo Caione <carlo@caione.org>,
Kevin Hilman <khilman@baylibre.com>
Cc: Jerome Brunet <jbrunet@baylibre.com>,
linux-gpio@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-amlogic@lists.infradead.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v2 7/8] ARM64: dts: meson-gxl: add i2s output pins
Date: Sun, 26 Mar 2017 19:19:22 +0200 [thread overview]
Message-ID: <20170326171923.19269-8-jbrunet@baylibre.com> (raw)
In-Reply-To: <20170326171923.19269-1-jbrunet@baylibre.com>
Add EE and AO domains pins for the i2s output clocks and data the gxl
device tree
Acked-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
---
arch/arm64/boot/dts/amlogic/meson-gxl.dtsi | 62 ++++++++++++++++++++++++++++++
1 file changed, 62 insertions(+)
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
index 269458b05fd4..3dde55856234 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
@@ -160,6 +160,20 @@
function = "pwm_ao_b";
};
};
+
+ i2s_out_ch23_ao_pins: i2s_out_ch23_ao {
+ mux {
+ groups = "i2s_out_ch23_ao";
+ function = "i2s_out_ao";
+ };
+ };
+
+ i2s_out_ch45_ao_pins: i2s_out_ch45_ao {
+ mux {
+ groups = "i2s_out_ch45_ao";
+ function = "i2s_out_ao";
+ };
+ };
};
};
@@ -385,6 +399,54 @@
function = "hdmi_i2c";
};
};
+
+ i2s_am_clk_pins: i2s_am_clk {
+ mux {
+ groups = "i2s_am_clk";
+ function = "i2s_out";
+ };
+ };
+
+ i2s_out_ao_clk_pins: i2s_out_ao_clk {
+ mux {
+ groups = "i2s_out_ao_clk";
+ function = "i2s_out";
+ };
+ };
+
+ i2s_out_lr_clk_pins: i2s_out_lr_clk {
+ mux {
+ groups = "i2s_out_lr_clk";
+ function = "i2s_out";
+ };
+ };
+
+ i2s_out_ch01_pins: i2s_out_ch01 {
+ mux {
+ groups = "i2s_out_ch01";
+ function = "i2s_out";
+ };
+ };
+ i2sout_ch23_z_pins: i2sout_ch23_z {
+ mux {
+ groups = "i2sout_ch23_z";
+ function = "i2s_out";
+ };
+ };
+
+ i2sout_ch45_z_pins: i2sout_ch45_z {
+ mux {
+ groups = "i2sout_ch45_z";
+ function = "i2s_out";
+ };
+ };
+
+ i2sout_ch67_z_pins: i2sout_ch67_z {
+ mux {
+ groups = "i2sout_ch67_z";
+ function = "i2s_out";
+ };
+ };
};
eth-phy-mux {
--
2.9.3
WARNING: multiple messages have this Message-ID (diff)
From: jbrunet@baylibre.com (Jerome Brunet)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 7/8] ARM64: dts: meson-gxl: add i2s output pins
Date: Sun, 26 Mar 2017 19:19:22 +0200 [thread overview]
Message-ID: <20170326171923.19269-8-jbrunet@baylibre.com> (raw)
In-Reply-To: <20170326171923.19269-1-jbrunet@baylibre.com>
Add EE and AO domains pins for the i2s output clocks and data the gxl
device tree
Acked-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
---
arch/arm64/boot/dts/amlogic/meson-gxl.dtsi | 62 ++++++++++++++++++++++++++++++
1 file changed, 62 insertions(+)
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
index 269458b05fd4..3dde55856234 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
@@ -160,6 +160,20 @@
function = "pwm_ao_b";
};
};
+
+ i2s_out_ch23_ao_pins: i2s_out_ch23_ao {
+ mux {
+ groups = "i2s_out_ch23_ao";
+ function = "i2s_out_ao";
+ };
+ };
+
+ i2s_out_ch45_ao_pins: i2s_out_ch45_ao {
+ mux {
+ groups = "i2s_out_ch45_ao";
+ function = "i2s_out_ao";
+ };
+ };
};
};
@@ -385,6 +399,54 @@
function = "hdmi_i2c";
};
};
+
+ i2s_am_clk_pins: i2s_am_clk {
+ mux {
+ groups = "i2s_am_clk";
+ function = "i2s_out";
+ };
+ };
+
+ i2s_out_ao_clk_pins: i2s_out_ao_clk {
+ mux {
+ groups = "i2s_out_ao_clk";
+ function = "i2s_out";
+ };
+ };
+
+ i2s_out_lr_clk_pins: i2s_out_lr_clk {
+ mux {
+ groups = "i2s_out_lr_clk";
+ function = "i2s_out";
+ };
+ };
+
+ i2s_out_ch01_pins: i2s_out_ch01 {
+ mux {
+ groups = "i2s_out_ch01";
+ function = "i2s_out";
+ };
+ };
+ i2sout_ch23_z_pins: i2sout_ch23_z {
+ mux {
+ groups = "i2sout_ch23_z";
+ function = "i2s_out";
+ };
+ };
+
+ i2sout_ch45_z_pins: i2sout_ch45_z {
+ mux {
+ groups = "i2sout_ch45_z";
+ function = "i2s_out";
+ };
+ };
+
+ i2sout_ch67_z_pins: i2sout_ch67_z {
+ mux {
+ groups = "i2sout_ch67_z";
+ function = "i2s_out";
+ };
+ };
};
eth-phy-mux {
--
2.9.3
WARNING: multiple messages have this Message-ID (diff)
From: jbrunet@baylibre.com (Jerome Brunet)
To: linus-amlogic@lists.infradead.org
Subject: [PATCH v2 7/8] ARM64: dts: meson-gxl: add i2s output pins
Date: Sun, 26 Mar 2017 19:19:22 +0200 [thread overview]
Message-ID: <20170326171923.19269-8-jbrunet@baylibre.com> (raw)
In-Reply-To: <20170326171923.19269-1-jbrunet@baylibre.com>
Add EE and AO domains pins for the i2s output clocks and data the gxl
device tree
Acked-by: Kevin Hilman <khilman@baylibre.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
---
arch/arm64/boot/dts/amlogic/meson-gxl.dtsi | 62 ++++++++++++++++++++++++++++++
1 file changed, 62 insertions(+)
diff --git a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
index 269458b05fd4..3dde55856234 100644
--- a/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-gxl.dtsi
@@ -160,6 +160,20 @@
function = "pwm_ao_b";
};
};
+
+ i2s_out_ch23_ao_pins: i2s_out_ch23_ao {
+ mux {
+ groups = "i2s_out_ch23_ao";
+ function = "i2s_out_ao";
+ };
+ };
+
+ i2s_out_ch45_ao_pins: i2s_out_ch45_ao {
+ mux {
+ groups = "i2s_out_ch45_ao";
+ function = "i2s_out_ao";
+ };
+ };
};
};
@@ -385,6 +399,54 @@
function = "hdmi_i2c";
};
};
+
+ i2s_am_clk_pins: i2s_am_clk {
+ mux {
+ groups = "i2s_am_clk";
+ function = "i2s_out";
+ };
+ };
+
+ i2s_out_ao_clk_pins: i2s_out_ao_clk {
+ mux {
+ groups = "i2s_out_ao_clk";
+ function = "i2s_out";
+ };
+ };
+
+ i2s_out_lr_clk_pins: i2s_out_lr_clk {
+ mux {
+ groups = "i2s_out_lr_clk";
+ function = "i2s_out";
+ };
+ };
+
+ i2s_out_ch01_pins: i2s_out_ch01 {
+ mux {
+ groups = "i2s_out_ch01";
+ function = "i2s_out";
+ };
+ };
+ i2sout_ch23_z_pins: i2sout_ch23_z {
+ mux {
+ groups = "i2sout_ch23_z";
+ function = "i2s_out";
+ };
+ };
+
+ i2sout_ch45_z_pins: i2sout_ch45_z {
+ mux {
+ groups = "i2sout_ch45_z";
+ function = "i2s_out";
+ };
+ };
+
+ i2sout_ch67_z_pins: i2sout_ch67_z {
+ mux {
+ groups = "i2sout_ch67_z";
+ function = "i2s_out";
+ };
+ };
};
eth-phy-mux {
--
2.9.3
next prev parent reply other threads:[~2017-03-26 17:19 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-03-26 17:19 [PATCH v2 0/8] pinctrl: meson: add audio output pins Jerome Brunet
2017-03-26 17:19 ` Jerome Brunet
2017-03-26 17:19 ` Jerome Brunet
2017-03-26 17:19 ` [PATCH v2 1/8] pinctrl: meson: gxbb: add i2s " Jerome Brunet
2017-03-26 17:19 ` Jerome Brunet
2017-03-26 17:19 ` Jerome Brunet
2017-03-26 17:19 ` Jerome Brunet
2017-03-26 17:19 ` [PATCH v2 2/8] pinctrl: meson: gxbb: add spdif " Jerome Brunet
2017-03-26 17:19 ` Jerome Brunet
2017-03-26 17:19 ` Jerome Brunet
2017-03-26 17:19 ` [PATCH v2 3/8] pinctrl: meson: gxl: add i2s " Jerome Brunet
2017-03-26 17:19 ` Jerome Brunet
2017-03-26 17:19 ` Jerome Brunet
2017-03-26 17:19 ` [PATCH v2 4/8] pinctrl: meson: gxl: add spdif " Jerome Brunet
2017-03-26 17:19 ` Jerome Brunet
2017-03-26 17:19 ` Jerome Brunet
2017-03-26 17:19 ` [PATCH v2 5/8] ARM64: dts: meson-gxbb: add i2s " Jerome Brunet
2017-03-26 17:19 ` Jerome Brunet
2017-03-26 17:19 ` Jerome Brunet
2017-03-26 17:19 ` [PATCH v2 6/8] ARM64: dts: meson-gxbb: add spdif " Jerome Brunet
2017-03-26 17:19 ` Jerome Brunet
2017-03-26 17:19 ` Jerome Brunet
2017-03-26 17:19 ` Jerome Brunet [this message]
2017-03-26 17:19 ` [PATCH v2 7/8] ARM64: dts: meson-gxl: add i2s " Jerome Brunet
2017-03-26 17:19 ` Jerome Brunet
2017-03-26 17:19 ` [PATCH v2 8/8] ARM64: dts: meson-gxl: add spdif " Jerome Brunet
2017-03-26 17:19 ` Jerome Brunet
2017-03-26 17:19 ` Jerome Brunet
2017-03-28 19:33 ` [PATCH v2 0/8] pinctrl: meson: add audio " Kevin Hilman
2017-03-28 19:33 ` Kevin Hilman
2017-03-28 19:33 ` Kevin Hilman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170326171923.19269-8-jbrunet@baylibre.com \
--to=jbrunet@baylibre.com \
--cc=carlo@caione.org \
--cc=devicetree@vger.kernel.org \
--cc=khilman@baylibre.com \
--cc=linus.walleij@linaro.org \
--cc=linux-amlogic@lists.infradead.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.