From: "Alex Bennée" <alex.bennee@linaro.org> To: drjones@redhat.com, pbonzini@redhat.com Cc: kvm@vger.kernel.org, marc.zyngier@arm.com, linux-arm-kernel@lists.infradead.org, kvmarm@lists.cs.columbia.edu Subject: [RFC kvm-unit-tests PATCH 4/8] Makefiles: use explicit path for including sub-Makefiles Date: Thu, 6 Apr 2017 20:07:23 +0100 [thread overview] Message-ID: <20170406190727.5624-5-alex.bennee@linaro.org> (raw) In-Reply-To: <20170406190727.5624-1-alex.bennee@linaro.org> I would of thought VPATH took care of this but apparently not. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> --- Makefile | 8 ++++---- arm/Makefile | 2 +- arm/Makefile.arm | 2 +- arm/Makefile.arm64 | 2 +- powerpc/Makefile | 2 +- powerpc/Makefile.ppc64 | 2 +- x86/Makefile | 2 +- x86/Makefile.i386 | 2 +- x86/Makefile.x86_64 | 2 +- 9 files changed, 12 insertions(+), 12 deletions(-) diff --git a/Makefile b/Makefile index 80bc57e..781186e 100644 --- a/Makefile +++ b/Makefile @@ -32,14 +32,14 @@ cflatobjs := \ lib/stack.o # libfdt paths -LIBFDT_objdir = lib/libfdt -LIBFDT_srcdir = lib/libfdt +LIBFDT_objdir = $(SRCDIR)/lib/libfdt +LIBFDT_srcdir = $(SRCDIR)/lib/libfdt LIBFDT_archive = $(LIBFDT_objdir)/libfdt.a LIBFDT_include = $(addprefix $(LIBFDT_srcdir)/,$(LIBFDT_INCLUDES)) LIBFDT_version = $(addprefix $(LIBFDT_srcdir)/,$(LIBFDT_VERSION)) -#include architecure specific make rules -include $(TEST_DIR)/Makefile +#include architecture specific make rules +include $(SRCDIR)/$(TEST_DIR)/Makefile # cc-option # Usage: OP_CFLAGS+=$(call cc-option, -falign-functions=0, -malign-functions=0) diff --git a/arm/Makefile b/arm/Makefile index 369a38b..8a007ab 100644 --- a/arm/Makefile +++ b/arm/Makefile @@ -1 +1 @@ -include $(TEST_DIR)/Makefile.$(ARCH) +include $(SRCDIR)/$(TEST_DIR)/Makefile.$(ARCH) diff --git a/arm/Makefile.arm b/arm/Makefile.arm index 92f3757..6b57284 100644 --- a/arm/Makefile.arm +++ b/arm/Makefile.arm @@ -22,6 +22,6 @@ cflatobjs += lib/arm/stack.o # arm specific tests tests = -include $(TEST_DIR)/Makefile.common +include $(SRCDIR)/$(TEST_DIR)/Makefile.common arch_clean: arm_clean diff --git a/arm/Makefile.arm64 b/arm/Makefile.arm64 index 0b0761c..b5fc1ec 100644 --- a/arm/Makefile.arm64 +++ b/arm/Makefile.arm64 @@ -14,7 +14,7 @@ cflatobjs += lib/arm64/spinlock.o # arm64 specific tests tests = -include $(TEST_DIR)/Makefile.common +include $(SRCDIR)/$(TEST_DIR)/Makefile.common arch_clean: arm_clean $(RM) lib/arm64/.*.d diff --git a/powerpc/Makefile b/powerpc/Makefile index 369a38b..8a007ab 100644 --- a/powerpc/Makefile +++ b/powerpc/Makefile @@ -1 +1 @@ -include $(TEST_DIR)/Makefile.$(ARCH) +include $(SRCDIR)/$(TEST_DIR)/Makefile.$(ARCH) diff --git a/powerpc/Makefile.ppc64 b/powerpc/Makefile.ppc64 index 3da3a83..3c0294a 100644 --- a/powerpc/Makefile.ppc64 +++ b/powerpc/Makefile.ppc64 @@ -20,7 +20,7 @@ cflatobjs += lib/ppc64/spinlock.o # ppc64 specific tests tests = -include $(TEST_DIR)/Makefile.common +include $(SRCDIR)/$(TEST_DIR)/Makefile.common arch_clean: powerpc_clean $(RM) lib/ppc64/.*.d diff --git a/x86/Makefile b/x86/Makefile index 369a38b..8a007ab 100644 --- a/x86/Makefile +++ b/x86/Makefile @@ -1 +1 @@ -include $(TEST_DIR)/Makefile.$(ARCH) +include $(SRCDIR)/$(TEST_DIR)/Makefile.$(ARCH) diff --git a/x86/Makefile.i386 b/x86/Makefile.i386 index 284b9e5..d801b80 100644 --- a/x86/Makefile.i386 +++ b/x86/Makefile.i386 @@ -7,4 +7,4 @@ cflatobjs += lib/x86/setjmp32.o tests = $(TEST_DIR)/taskswitch.flat $(TEST_DIR)/taskswitch2.flat \ $(TEST_DIR)/cmpxchg8b.flat -include $(TEST_DIR)/Makefile.common +include $(SRCDIR)/$(TEST_DIR)/Makefile.common diff --git a/x86/Makefile.x86_64 b/x86/Makefile.x86_64 index 3e2821e..30f82a6 100644 --- a/x86/Makefile.x86_64 +++ b/x86/Makefile.x86_64 @@ -17,7 +17,7 @@ tests += $(TEST_DIR)/vmx.flat tests += $(TEST_DIR)/tscdeadline_latency.flat tests += $(TEST_DIR)/intel-iommu.flat -include $(TEST_DIR)/Makefile.common +include $(SRCDIR)/$(TEST_DIR)/Makefile.common $(TEST_DIR)/hyperv_clock.elf: $(TEST_DIR)/hyperv_clock.o -- 2.11.0 _______________________________________________ kvmarm mailing list kvmarm@lists.cs.columbia.edu https://lists.cs.columbia.edu/mailman/listinfo/kvmarm
WARNING: multiple messages have this Message-ID (diff)
From: alex.bennee@linaro.org (Alex Bennée) To: linux-arm-kernel@lists.infradead.org Subject: [RFC kvm-unit-tests PATCH 4/8] Makefiles: use explicit path for including sub-Makefiles Date: Thu, 6 Apr 2017 20:07:23 +0100 [thread overview] Message-ID: <20170406190727.5624-5-alex.bennee@linaro.org> (raw) In-Reply-To: <20170406190727.5624-1-alex.bennee@linaro.org> I would of thought VPATH took care of this but apparently not. Signed-off-by: Alex Benn?e <alex.bennee@linaro.org> --- Makefile | 8 ++++---- arm/Makefile | 2 +- arm/Makefile.arm | 2 +- arm/Makefile.arm64 | 2 +- powerpc/Makefile | 2 +- powerpc/Makefile.ppc64 | 2 +- x86/Makefile | 2 +- x86/Makefile.i386 | 2 +- x86/Makefile.x86_64 | 2 +- 9 files changed, 12 insertions(+), 12 deletions(-) diff --git a/Makefile b/Makefile index 80bc57e..781186e 100644 --- a/Makefile +++ b/Makefile @@ -32,14 +32,14 @@ cflatobjs := \ lib/stack.o # libfdt paths -LIBFDT_objdir = lib/libfdt -LIBFDT_srcdir = lib/libfdt +LIBFDT_objdir = $(SRCDIR)/lib/libfdt +LIBFDT_srcdir = $(SRCDIR)/lib/libfdt LIBFDT_archive = $(LIBFDT_objdir)/libfdt.a LIBFDT_include = $(addprefix $(LIBFDT_srcdir)/,$(LIBFDT_INCLUDES)) LIBFDT_version = $(addprefix $(LIBFDT_srcdir)/,$(LIBFDT_VERSION)) -#include architecure specific make rules -include $(TEST_DIR)/Makefile +#include architecture specific make rules +include $(SRCDIR)/$(TEST_DIR)/Makefile # cc-option # Usage: OP_CFLAGS+=$(call cc-option, -falign-functions=0, -malign-functions=0) diff --git a/arm/Makefile b/arm/Makefile index 369a38b..8a007ab 100644 --- a/arm/Makefile +++ b/arm/Makefile @@ -1 +1 @@ -include $(TEST_DIR)/Makefile.$(ARCH) +include $(SRCDIR)/$(TEST_DIR)/Makefile.$(ARCH) diff --git a/arm/Makefile.arm b/arm/Makefile.arm index 92f3757..6b57284 100644 --- a/arm/Makefile.arm +++ b/arm/Makefile.arm @@ -22,6 +22,6 @@ cflatobjs += lib/arm/stack.o # arm specific tests tests = -include $(TEST_DIR)/Makefile.common +include $(SRCDIR)/$(TEST_DIR)/Makefile.common arch_clean: arm_clean diff --git a/arm/Makefile.arm64 b/arm/Makefile.arm64 index 0b0761c..b5fc1ec 100644 --- a/arm/Makefile.arm64 +++ b/arm/Makefile.arm64 @@ -14,7 +14,7 @@ cflatobjs += lib/arm64/spinlock.o # arm64 specific tests tests = -include $(TEST_DIR)/Makefile.common +include $(SRCDIR)/$(TEST_DIR)/Makefile.common arch_clean: arm_clean $(RM) lib/arm64/.*.d diff --git a/powerpc/Makefile b/powerpc/Makefile index 369a38b..8a007ab 100644 --- a/powerpc/Makefile +++ b/powerpc/Makefile @@ -1 +1 @@ -include $(TEST_DIR)/Makefile.$(ARCH) +include $(SRCDIR)/$(TEST_DIR)/Makefile.$(ARCH) diff --git a/powerpc/Makefile.ppc64 b/powerpc/Makefile.ppc64 index 3da3a83..3c0294a 100644 --- a/powerpc/Makefile.ppc64 +++ b/powerpc/Makefile.ppc64 @@ -20,7 +20,7 @@ cflatobjs += lib/ppc64/spinlock.o # ppc64 specific tests tests = -include $(TEST_DIR)/Makefile.common +include $(SRCDIR)/$(TEST_DIR)/Makefile.common arch_clean: powerpc_clean $(RM) lib/ppc64/.*.d diff --git a/x86/Makefile b/x86/Makefile index 369a38b..8a007ab 100644 --- a/x86/Makefile +++ b/x86/Makefile @@ -1 +1 @@ -include $(TEST_DIR)/Makefile.$(ARCH) +include $(SRCDIR)/$(TEST_DIR)/Makefile.$(ARCH) diff --git a/x86/Makefile.i386 b/x86/Makefile.i386 index 284b9e5..d801b80 100644 --- a/x86/Makefile.i386 +++ b/x86/Makefile.i386 @@ -7,4 +7,4 @@ cflatobjs += lib/x86/setjmp32.o tests = $(TEST_DIR)/taskswitch.flat $(TEST_DIR)/taskswitch2.flat \ $(TEST_DIR)/cmpxchg8b.flat -include $(TEST_DIR)/Makefile.common +include $(SRCDIR)/$(TEST_DIR)/Makefile.common diff --git a/x86/Makefile.x86_64 b/x86/Makefile.x86_64 index 3e2821e..30f82a6 100644 --- a/x86/Makefile.x86_64 +++ b/x86/Makefile.x86_64 @@ -17,7 +17,7 @@ tests += $(TEST_DIR)/vmx.flat tests += $(TEST_DIR)/tscdeadline_latency.flat tests += $(TEST_DIR)/intel-iommu.flat -include $(TEST_DIR)/Makefile.common +include $(SRCDIR)/$(TEST_DIR)/Makefile.common $(TEST_DIR)/hyperv_clock.elf: $(TEST_DIR)/hyperv_clock.o -- 2.11.0
next prev parent reply other threads:[~2017-04-06 19:07 UTC|newest] Thread overview: 62+ messages / expand[flat|nested] mbox.gz Atom feed top 2017-04-06 19:07 [RFC kvm-unit-tests PATCH 0/8] Support for out-of-tree builds Alex Bennée 2017-04-06 19:07 ` Alex Bennée 2017-04-06 19:07 ` [RFC kvm-unit-tests PATCH 1/8] configure: make it run-able from outside source tree Alex Bennée 2017-04-06 19:07 ` Alex Bennée 2017-04-07 11:40 ` Andrew Jones 2017-04-07 11:40 ` Andrew Jones 2017-04-07 11:46 ` Peter Maydell 2017-04-07 11:46 ` Peter Maydell 2017-04-06 19:07 ` [RFC kvm-unit-tests PATCH 2/8] Makefile: ensure build-head works out-of-src-tree Alex Bennée 2017-04-06 19:07 ` Alex Bennée 2017-04-07 11:44 ` Andrew Jones 2017-04-07 11:44 ` Andrew Jones 2017-04-06 19:07 ` [RFC kvm-unit-tests PATCH 3/8] Makefile: set VPATH based on SRCDIR Alex Bennée 2017-04-06 19:07 ` Alex Bennée 2017-04-07 11:56 ` Andrew Jones 2017-04-07 11:56 ` Andrew Jones 2017-04-06 19:07 ` Alex Bennée [this message] 2017-04-06 19:07 ` [RFC kvm-unit-tests PATCH 4/8] Makefiles: use explicit path for including sub-Makefiles Alex Bennée 2017-04-07 8:53 ` Thomas Huth 2017-04-07 8:53 ` Thomas Huth 2017-04-07 9:21 ` Alex Bennée 2017-04-07 9:21 ` Alex Bennée 2017-04-07 12:20 ` Andrew Jones 2017-04-07 12:20 ` Andrew Jones 2017-04-27 15:54 ` Paolo Bonzini 2017-04-27 15:54 ` Paolo Bonzini 2017-04-06 19:07 ` [RFC kvm-unit-tests PATCH 5/8] Makefile: add explicit mkdir for .o targets Alex Bennée 2017-04-06 19:07 ` Alex Bennée 2017-04-07 14:42 ` Andrew Jones 2017-04-07 14:42 ` Andrew Jones 2017-04-27 15:57 ` Paolo Bonzini 2017-04-27 15:57 ` Paolo Bonzini 2017-05-11 15:30 ` Alex Bennée 2017-05-11 15:30 ` Alex Bennée 2017-05-12 10:36 ` Paolo Bonzini 2017-05-12 10:36 ` Paolo Bonzini 2017-05-12 11:14 ` Alex Bennée 2017-05-12 11:14 ` Alex Bennée 2017-04-06 19:07 ` [RFC kvm-unit-tests PATCH 6/8] Makefiles: handle linking of scripts into build-tree Alex Bennée 2017-04-06 19:07 ` Alex Bennée 2017-04-07 9:22 ` Thomas Huth 2017-04-07 9:22 ` Thomas Huth 2017-04-07 10:38 ` Alex Bennée 2017-04-07 10:38 ` Alex Bennée 2017-04-07 13:37 ` Andrew Jones 2017-04-07 13:37 ` Andrew Jones 2017-04-06 19:07 ` [RFC kvm-unit-tests PATCH 7/8] Makefiles: fix up the x86 build include and link paths Alex Bennée 2017-04-06 19:07 ` Alex Bennée 2017-04-07 13:31 ` Andrew Jones 2017-04-07 13:31 ` Andrew Jones 2017-04-07 14:30 ` Alex Bennée 2017-04-07 14:30 ` Alex Bennée 2017-04-06 19:07 ` [RFC kvm-unit-tests PATCH 8/8] Makefiles: fix up the arm " Alex Bennée 2017-04-06 19:07 ` Alex Bennée 2017-04-07 6:58 ` [RFC kvm-unit-tests PATCH 9/8] Makefiles: Fix up the powerpc " Thomas Huth 2017-04-07 6:58 ` Thomas Huth 2017-04-07 8:02 ` Alex Bennée 2017-04-07 8:02 ` Alex Bennée 2017-04-07 13:56 ` [RFC kvm-unit-tests PATCH 8/8] Makefiles: fix up the arm " Andrew Jones 2017-04-07 13:56 ` Andrew Jones 2017-04-07 14:29 ` Alex Bennée 2017-04-07 14:29 ` Alex Bennée
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20170406190727.5624-5-alex.bennee@linaro.org \ --to=alex.bennee@linaro.org \ --cc=drjones@redhat.com \ --cc=kvm@vger.kernel.org \ --cc=kvmarm@lists.cs.columbia.edu \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=marc.zyngier@arm.com \ --cc=pbonzini@redhat.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.