From: David Hildenbrand <david@redhat.com>
To: kvm@vger.kernel.org
Cc: "Paolo Bonzini" <pbonzini@redhat.com>,
"Radim Krčmář" <rkrcmar@redhat.com>,
"Thomas Huth" <thuth@redhat.com>,
david@redhat.com,
"Christian Borntraeger" <borntraeger@de.ibm.com>,
"Cornelia Huck" <cornelia.huck@de.ibm.com>
Subject: [kvm-unit-tests PATCH v2 1/6] s390x: initial infrastructure
Date: Thu, 18 May 2017 13:34:22 +0200 [thread overview]
Message-ID: <20170518113427.18387-2-david@redhat.com> (raw)
In-Reply-To: <20170518113427.18387-1-david@redhat.com>
This adds the very basic infrastructure for s390x. As we compile for
z900, also QEMU tcg can be used.
To cross compile:
$./configure --arch=s390x --cross-prefix=/usr/bin/s390x-linux-gnu-
$ make
Please note that for now, nothing will be compiled, as there is no test
to compile. A basic self test will be added in the following patches.
smp and stack unwinding is not supported yet. sclp console output will
be added in the following patches.
Parts based on a prototype by Thomas Huth.
Signed-off-by: David Hildenbrand <david@redhat.com>
---
configure | 2 +-
lib/s390x/asm/barrier.h | 16 ++++++++++++++
lib/s390x/asm/io.h | 18 ++++++++++++++++
lib/s390x/asm/page.h | 16 ++++++++++++++
lib/s390x/asm/spinlock.h | 16 ++++++++++++++
lib/s390x/asm/stack.h | 21 ++++++++++++++++++
lib/s390x/io.c | 48 +++++++++++++++++++++++++++++++++++++++++
lib/s390x/stack.c | 28 ++++++++++++++++++++++++
s390x/Makefile | 31 +++++++++++++++++++++++++++
s390x/cstart64.S | 44 +++++++++++++++++++++++++++++++++++++
s390x/flat.lds | 42 ++++++++++++++++++++++++++++++++++++
s390x/run | 56 ++++++++++++++++++++++++++++++++++++++++++++++++
s390x/unittests.cfg | 19 ++++++++++++++++
13 files changed, 356 insertions(+), 1 deletion(-)
create mode 100644 lib/s390x/asm/barrier.h
create mode 100644 lib/s390x/asm/io.h
create mode 100644 lib/s390x/asm/page.h
create mode 100644 lib/s390x/asm/spinlock.h
create mode 100644 lib/s390x/asm/stack.h
create mode 100644 lib/s390x/io.c
create mode 100644 lib/s390x/stack.c
create mode 100644 s390x/Makefile
create mode 100644 s390x/cstart64.S
create mode 100644 s390x/flat.lds
create mode 100755 s390x/run
create mode 100644 s390x/unittests.cfg
diff --git a/configure b/configure
index d152414..3690041 100755
--- a/configure
+++ b/configure
@@ -7,7 +7,7 @@ objcopy=objcopy
objdump=objdump
ar=ar
addr2line=addr2line
-arch=`uname -m | sed -e 's/i.86/i386/;s/arm.*/arm/;s/ppc64.*/ppc64/'`
+arch=`uname -m | sed -e 's/i.86/i386/;s/arm.*/arm/;s/ppc64.*/ppc64/;s/s390x.*/s390x/'`
host=$arch
cross_prefix=
endian=""
diff --git a/lib/s390x/asm/barrier.h b/lib/s390x/asm/barrier.h
new file mode 100644
index 0000000..d862e78
--- /dev/null
+++ b/lib/s390x/asm/barrier.h
@@ -0,0 +1,16 @@
+/*
+ * Copyright (c) 2017 Red Hat Inc
+ *
+ * Authors:
+ * Thomas Huth <thuth@redhat.com>
+ * David Hildenbrand <david@redhat.com>
+ *
+ * This code is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU Library General Public License version 2.
+ */
+#ifndef _ASM_S390X_BARRIER_H_
+#define _ASM_S390X_BARRIER_H_
+
+#include <asm-generic/barrier.h>
+
+#endif
diff --git a/lib/s390x/asm/io.h b/lib/s390x/asm/io.h
new file mode 100644
index 0000000..094dace
--- /dev/null
+++ b/lib/s390x/asm/io.h
@@ -0,0 +1,18 @@
+/*
+ * Copyright (c) 2017 Red Hat Inc
+ *
+ * Authors:
+ * Thomas Huth <thuth@redhat.com>
+ * David Hildenbrand <david@redhat.com>
+ *
+ * This code is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU Library General Public License version 2.
+ */
+#ifndef _ASMS390X_IO_H_
+#define _ASMS390X_IO_H_
+
+#define __iomem
+
+#include <asm-generic/io.h>
+
+#endif
diff --git a/lib/s390x/asm/page.h b/lib/s390x/asm/page.h
new file mode 100644
index 0000000..141a456
--- /dev/null
+++ b/lib/s390x/asm/page.h
@@ -0,0 +1,16 @@
+/*
+ * Copyright (c) 2017 Red Hat Inc
+ *
+ * Authors:
+ * Thomas Huth <thuth@redhat.com>
+ * David Hildenbrand <david@redhat.com>
+ *
+ * This code is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU Library General Public License version 2.
+ */
+#ifndef _ASMS390X_PAGE_H_
+#define _ASMS390X_PAGE_H_
+
+#include <asm-generic/page.h>
+
+#endif
diff --git a/lib/s390x/asm/spinlock.h b/lib/s390x/asm/spinlock.h
new file mode 100644
index 0000000..f7d3982
--- /dev/null
+++ b/lib/s390x/asm/spinlock.h
@@ -0,0 +1,16 @@
+/*
+ * Copyright (c) 2017 Red Hat Inc
+ *
+ * Authors:
+ * Thomas Huth <thuth@redhat.com>
+ * David Hildenbrand <david@redhat.com>
+ *
+ * This code is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU Library General Public License version 2.
+ */
+#ifndef __ASMS390X_SPINLOCK_H
+#define __ASMS390X_SPINLOCK_H
+
+#include <asm-generic/spinlock.h>
+
+#endif
diff --git a/lib/s390x/asm/stack.h b/lib/s390x/asm/stack.h
new file mode 100644
index 0000000..e36d975
--- /dev/null
+++ b/lib/s390x/asm/stack.h
@@ -0,0 +1,21 @@
+/*
+ * Copyright (c) 2017 Red Hat Inc
+ *
+ * Authors:
+ * Thomas Huth <thuth@redhat.com>
+ * David Hildenbrand <david@redhat.com>
+ *
+ * This code is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU Library General Public License version 2.
+ */
+#ifndef _ASMS390X_STACK_H_
+#define _ASMS390X_STACK_H_
+
+#ifndef _STACK_H_
+#error Do not directly include <asm/stack.h>. Just use <stack.h>.
+#endif
+
+#define HAVE_ARCH_BACKTRACE_FRAME
+#define HAVE_ARCH_BACKTRACE
+
+#endif
diff --git a/lib/s390x/io.c b/lib/s390x/io.c
new file mode 100644
index 0000000..a652124
--- /dev/null
+++ b/lib/s390x/io.c
@@ -0,0 +1,48 @@
+/*
+ * s390x io implementation
+ *
+ * Copyright (c) 2017 Red Hat Inc
+ *
+ * Authors:
+ * Thomas Huth <thuth@redhat.com>
+ * David Hildenbrand <david@redhat.com>
+ *
+ * This code is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU Library General Public License version 2.
+ */
+#include <libcflat.h>
+#include <asm/spinlock.h>
+
+extern void setup_args_progname(const char *args);
+extern char ipl_args[];
+
+static struct spinlock lock;
+
+void puts(const char *s)
+{
+ spin_lock(&lock);
+ /* FIXME */
+ (void)s;
+ spin_unlock(&lock);
+}
+
+static void sigp_stop()
+{
+ register unsigned long status asm ("1") = 0;
+ register unsigned long cpu asm ("2") = 0;
+
+ asm volatile(
+ " sigp %0,%1,0(%2)\n"
+ : "+d" (status) : "d" (cpu), "d" (5) : "cc");
+}
+
+void setup()
+{
+ setup_args_progname(ipl_args);
+}
+
+void exit(int code)
+{
+ printf("\nEXIT: STATUS=%d\n", ((code) << 1) | 1);
+ sigp_stop();
+}
diff --git a/lib/s390x/stack.c b/lib/s390x/stack.c
new file mode 100644
index 0000000..cd34b20
--- /dev/null
+++ b/lib/s390x/stack.c
@@ -0,0 +1,28 @@
+/*
+ * s390x stack implementation
+ *
+ * Copyright (c) 2017 Red Hat Inc
+ *
+ * Authors:
+ * Thomas Huth <thuth@redhat.com>
+ * David Hildenbrand <david@redhat.com>
+ *
+ * This code is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU Library General Public License version 2.
+ */
+#include <libcflat.h>
+#include <stack.h>
+
+int backtrace_frame(const void *frame, const void **return_addrs, int max_depth)
+{
+ printf("TODO: Implement backtrace_frame(%p, %p, %d) function!\n",
+ frame, return_addrs, max_depth);
+ return 0;
+}
+
+int backtrace(const void **return_addrs, int max_depth)
+{
+ printf("TODO: Implement backtrace(%p, %d) function!\n",
+ return_addrs, max_depth);
+ return 0;
+}
diff --git a/s390x/Makefile b/s390x/Makefile
new file mode 100644
index 0000000..193c3a0
--- /dev/null
+++ b/s390x/Makefile
@@ -0,0 +1,31 @@
+all: test_cases
+
+test_cases: $(tests)
+
+CFLAGS += -std=gnu99
+CFLAGS += -ffreestanding
+CFLAGS += -Wextra
+CFLAGS += -I lib
+CFLAGS += -O2
+CFLAGS += -march=z900
+LDFLAGS += -nostdlib
+
+# We want to keep intermediate files
+.PRECIOUS: %.o
+
+cflatobjs += lib/util.o
+cflatobjs += lib/alloc.o
+cflatobjs += lib/s390x/io.o
+cflatobjs += lib/s390x/stack.o
+
+cstart.o = $(TEST_DIR)/cstart64.o
+
+FLATLIBS = $(libcflat)
+%.elf: %.o $(FLATLIBS) s390x/flat.lds $(cstart.o)
+ $(CC) $(CFLAGS) -c -o $(@:.elf=.aux.o) lib/auxinfo.c -DPROGNAME=\"$@\"
+ $(CC) $(LDFLAGS) -o $@ -T s390x/flat.lds -Ttext=0x10000 \
+ $(filter %.o, $^) $(FLATLIBS) $(@:.elf=.aux.o)
+ $(RM) $(@:.elf=.aux.o)
+
+arch_clean:
+ $(RM) $(TEST_DIR)/*.{o,elf} $(TEST_DIR)/.*.d lib/s390x/.*.d
diff --git a/s390x/cstart64.S b/s390x/cstart64.S
new file mode 100644
index 0000000..28cd59d
--- /dev/null
+++ b/s390x/cstart64.S
@@ -0,0 +1,44 @@
+/*
+ * s390x startup code
+ *
+ * Copyright (c) 2017 Red Hat Inc
+ *
+ * Authors:
+ * Thomas Huth <thuth@redhat.com>
+ * David Hildenbrand <david@redhat.com>
+ *
+ * This code is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU Library General Public License version 2.
+ */
+.section .init
+
+/* entry point - for KVM + TCG we directly start in 64 bit mode */
+ .globl start
+start:
+ /* setup stack */
+ larl %r15, stacktop
+ /* setup initial PSW mask + control registers*/
+ larl %r1, initital_psw
+ lpswe 0(%r1)
+init_psw_cont:
+ larl %r1, initital_cr0
+ lctlg %c0, %c0, 0(%r1)
+ /* call setup() */
+ brasl %r14, setup
+ /* forward test parameter */
+ larl %r2, __argc
+ llgf %r2, 0(%r2)
+ larl %r3, __argv
+ /* call to main() */
+ brasl %r14, main
+ /* forward exit code */
+ lgr %r3, %r2
+ /* call exit() */
+ j exit
+
+ .align 8
+initital_psw:
+ .quad 0x0000000180000000, init_psw_cont
+initital_cr0:
+ /* enable AFP-register control, so FP regs (+BFP instr) can be used */
+ .quad 0x0000000000040000
diff --git a/s390x/flat.lds b/s390x/flat.lds
new file mode 100644
index 0000000..b6e2172
--- /dev/null
+++ b/s390x/flat.lds
@@ -0,0 +1,42 @@
+SECTIONS
+{
+ .text : {
+ *(.init)
+ . = 0x480;
+ ipl_args = .;
+ . = 0x600;
+ *(.text)
+ *(.text.*)
+ }
+ . = ALIGN(64K);
+ etext = .;
+ .opd : { *(.opd) }
+ . = ALIGN(16);
+ .dynamic : {
+ dynamic_start = .;
+ *(.dynamic)
+ }
+ .dynsym : {
+ dynsym_start = .;
+ *(.dynsym)
+ }
+ .rela.dyn : { *(.rela*) }
+ . = ALIGN(16);
+ .data : {
+ *(.data)
+ *(.data.rel*)
+ }
+ . = ALIGN(16);
+ .rodata : { *(.rodata) *(.rodata.*) }
+ . = ALIGN(16);
+ .bss : { *(.bss) }
+ . = ALIGN(64K);
+ edata = .;
+ . += 64K;
+ . = ALIGN(64K);
+ /*
+ * stackptr set with initial stack frame preallocated
+ */
+ stackptr = . - 160;
+ stacktop = .;
+}
diff --git a/s390x/run b/s390x/run
new file mode 100755
index 0000000..cf333de
--- /dev/null
+++ b/s390x/run
@@ -0,0 +1,56 @@
+#!/usr/bin/env bash
+
+if [ -z "$STANDALONE" ]; then
+ if [ ! -f config.mak ]; then
+ echo "run ./configure && make first. See ./configure -h"
+ exit 2
+ fi
+ source config.mak
+ source scripts/arch-run.bash
+fi
+
+if [ -c /dev/kvm ]; then
+ if [ "$HOST" = "s390x" ] && [ "$ARCH" = "s390x" ]; then
+ kvm_available=yes
+ fi
+fi
+
+if [ "$ACCEL" = "kvm" ] && [ "$kvm_available" != "yes" ]; then
+ echo "KVM is needed, but not available on this host"
+ exit 2
+fi
+
+if [ -z "$ACCEL" ]; then
+ if [ "$kvm_available" = "yes" ]; then
+ ACCEL="kvm"
+ else
+ ACCEL="tcg"
+ fi
+fi
+
+qemu=$(search_qemu_binary)
+
+M='-machine s390-ccw-virtio'
+M+=",accel=$ACCEL"
+command="$qemu -nodefaults -nographic $M"
+command+=" -chardev stdio,id=con0 -device sclpconsole,chardev=con0"
+[ -f "$ENV" ] && command+=" -initrd $ENV"
+command+=" -kernel"
+command="$(timeout_cmd) $command"
+echo $command "$@"
+
+# We return the exit code via stdout, not via the QEMU return code
+lines=$(run_qemu $command "$@")
+ret=$?
+echo "$lines"
+if [ $ret -eq 1 ]; then
+ testret=$(grep '^EXIT: ' <<<"$lines" | sed 's/.*STATUS=\([0-9][0-9]*\).*/\1/')
+ if [ "$testret" ]; then
+ if [ $testret -eq 1 ]; then
+ ret=0
+ else
+ ret=$testret
+ fi
+ fi
+fi
+exit $ret
diff --git a/s390x/unittests.cfg b/s390x/unittests.cfg
new file mode 100644
index 0000000..b1e0b1e
--- /dev/null
+++ b/s390x/unittests.cfg
@@ -0,0 +1,19 @@
+##############################################################################
+# unittest configuration
+#
+# [unittest_name]
+# file = <name>.elf # Name of the elf file to be used.
+# extra_params = -append <params...> # Additional parameters used.
+# groups = <group_name1> <group_name2> ... # Used to identify test cases
+# # with run_tests -g ...
+# # Specify group_name=nodefault
+# # to have test not run by default
+# accel = kvm|tcg # Optionally specify if test must run with
+# # kvm or tcg. If not specified, then kvm will
+# # be used when available.
+# timeout = <duration> # Optionally specify a timeout.
+# check = <path>=<value> # check a file for a particular value before running
+# # a test. The check line can contain multiple files
+# # to check separated by a space but each check
+# # parameter needs to be of the form <path>=<value>
+##############################################################################
--
2.9.3
next prev parent reply other threads:[~2017-05-18 11:34 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-05-18 11:34 [kvm-unit-tests PATCH v2 0/6] s390x: basic test infrastructure David Hildenbrand
2017-05-18 11:34 ` David Hildenbrand [this message]
2017-05-19 9:00 ` [kvm-unit-tests PATCH v2 1/6] s390x: initial infrastructure Thomas Huth
2017-05-19 12:39 ` David Hildenbrand
2017-05-18 11:34 ` [kvm-unit-tests PATCH v2 2/6] s390x: basic self test David Hildenbrand
2017-05-19 9:23 ` Thomas Huth
2017-05-19 12:45 ` David Hildenbrand
2017-05-18 11:34 ` [kvm-unit-tests PATCH v2 3/6] s390x: copy sclp.h and sclp-ascii.c from QEMU David Hildenbrand
2017-05-19 9:32 ` Thomas Huth
2017-05-19 12:48 ` David Hildenbrand
2017-05-18 11:34 ` [kvm-unit-tests PATCH v2 4/6] s390x: compile sclp-ascii.c David Hildenbrand
2017-05-18 11:34 ` [kvm-unit-tests PATCH v2 5/6] s390x: wire up sclp console output David Hildenbrand
2017-05-19 9:33 ` Thomas Huth
2017-05-18 11:34 ` [kvm-unit-tests PATCH v2 6/6] MAINTAINERS: add s390x maintainers David Hildenbrand
2017-05-19 9:35 ` Thomas Huth
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170518113427.18387-2-david@redhat.com \
--to=david@redhat.com \
--cc=borntraeger@de.ibm.com \
--cc=cornelia.huck@de.ibm.com \
--cc=kvm@vger.kernel.org \
--cc=pbonzini@redhat.com \
--cc=rkrcmar@redhat.com \
--cc=thuth@redhat.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.